After editing a RAW photo, can it be saved as a RAW photo?

Thanks for answering my question. I always have had RAW checked to an external editor which is PE13 on my Preferences panel in iPhoto.
I probably didn't make myself clear. When I send an ORIGINAL RAW untouched, unedited image to PE13 and do the editing and the
adjustments- (it looks great) and then try and SAVE it and forward it to my iPhoto library, it will not be sent. On the other hand if any editing
at all is first performed in iPhoto and then sent to PE13 for adjustments, and I SAVE it, it asks if I want to Replace this new edited image with
what already exists in my iPhoto library, I click REPLACE, the little wheel spins, I go to iPhoto and the new image is there. PE13 does
accept an original RAW image for editing because it will save it in PE13 in the RECENTLY EDITED column. Ideas? I need to keep my iPhoto
library intact. Ideas? Thanks.

Similar Messages

After editing a RAW photo in PE13 (my External Editor) sent from Apple's iPhoto, I can not reimport the edited photo bank into my iPhoto library. The "Import to Library" command is greyed out. This was not the case before the latest PE13 RAW update versio

After editing a RAW photo in PE13 (my External Editor) originally sent from Apple's iPhoto, I can not reimport the edited photo back into my iPhoto library. The
"Import to Library" command is greyed out. This was not the case until the latest PE13 update (Camera Raw Version 8.7.1.311). What needs to be done
to reimport edited photos back into my iPhoto library? Ideas?

Launch PSE Expert Mode and go to:
Photoshop Elements Editor >> Preferences >> Saving Files (tab)
Set the drop-down dialog
On First Save : Save Over Current File
Click OK.
When you have finished editing in PSE use Cmd+S to save (not Save As)

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited in iPhoto first and sent to PE13 for adjustments, it can be sent back to iPhoto library. Ideas?

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited first in iPhoto, and sent to PE13 for adjustments,
I can get it back into my iPhoto library. Ideas?

Thanks for answering my question. I always have had RAW checked to an external editor which is PE13 on my Preferences panel in iPhoto.
I probably didn't make myself clear. When I send an ORIGINAL RAW untouched, unedited image to PE13 and do the editing and the
adjustments- (it looks great) and then try and SAVE it and forward it to my iPhoto library, it will not be sent. On the other hand if any editing
at all is first performed in iPhoto and then sent to PE13 for adjustments, and I SAVE it, it asks if I want to Replace this new edited image with
what already exists in my iPhoto library, I click REPLACE, the little wheel spins, I go to iPhoto and the new image is there. PE13 does
accept an original RAW image for editing because it will save it in PE13 in the RECENTLY EDITED column. Ideas? I need to keep my iPhoto
library intact. Ideas? Thanks.

After editing in perfect photo I cannot unstack the edited photo in LR4.

After editing in perfect photo I cannot unstack the edited photo in LR4. The thumbnail shows the number of photos in the stack, but right click/expand stack has no effect. The edited photo is not showing.

The edited photo (assumed to be a TIFF, created via Edit In or an Export plugin) might need to be added to the catalogue. The plugin should arguably do this but I’ve had issues in the past where this didn’t happen. Try adding the newly edited image using the Import dialogue - any images in the folder not already in the catalogue will be ticked.
NB You might find the newly added image on the far right of the filmstrip.

After editing camera raw and export as jpeg,image becomes overexposed when view on light room..please advise.

need some help here. don't know if i can describe this accurately.
i was using lightroom previously. edit my raw file and then export in jpeg. everything appear normal as what i wanted.
recently i got cs4 and started using bridge. now after i edit my photo in lightroom and export,the view of the jpeg file appears overexpose(exposure was increase) and when view on adobe bridge same problem. but if i open photoshop and use my workspace colour setting everything is ok. when i see my picture on iphoto it is normal as per i have edited. i just don't know what setting i have touch that cause my viewing of edited photo on lightroom and bridge goes overexpose. on bridge,thumbnail ok but preview bad...
for the record: i just install CS4 and snow leopard recently. before this i have no problems with LR. I'm also not sure if i have accidentally change any settings.
i shoot with a 5D mark 2 and use the raw file for edit.
will appreciate any advise. Thanks

grjacek wrote:
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
Yes
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help
We're going to need a lot more details aobut exactly (EXACTLY) the steps you follow after you do the export, because normally I would say this is one of the easiest things possible in Lightroom. Are any files moved or renamed or disks unplugged in between the time of export and the time when you try to edit again?

After editing a raw picture the brightness changes!??!

Hi All,
When i initially open a RAW file it gives my an initial edit screen where i can change white balance, exposure, etc. So i get the photo exactly how i like it. When i click the 'open image' button i am taken into the main screen of elements 10. As it does this action it makes the photo i have done a pre edit on and it appears darker! Why is the software changing the photo between when i have initially edited the photo and the main edit screen?
I am at a loss!
Mark.

Could you post some screenshots?
What operating system?

After editing in I-Photo when I press done picture goes completely away

I have an epson perfection3170 photo scannner. I have been scanning slides for the past year with no problems. About 6 months ago, when ever I scan a picture into Photoshop Elements 4.01 in my Mac and do any kind of fix to the photo and then say done, the picture goes away completely. It does not go into a library or to the desk or any where else. I have reloded the Photoshop Element 4.01 again but I still have the same problem.

Can you explain what you're doing a little more? Your thread title talks about iphoto but nothing in your message does, so it's not very clear.

IPhoto RAW Images Compress after Editing!!

Has anyone noticed that after editing a RAW picture in iPhoto that it compresses to less than half it's size?
If I have a file that that is 11.2mb, after the edit it drops to 1.9mb.
Is this a setting I am missing?
Message was edited by: Richard Hagan

Yes, it will show a smaller size. But if you drag that thumbnail to the desktop you'll find you have a jpg file which is the results of your editing the raw file in iPhoto. What iPhoto is reporting is the file size of the jpg that will created if you need to produce an file of that edited RAW file. Until you drag it to the desktop the edit (or rather edit instructions) are kept in iPhoto's database files and iPhoto uses that information to display the edited version in iPhoto.

IPhoto does not see any changes after editing a photo in Camera Raw

Hello everyone ,
I have some small problem with my iPhoto. I have set up Camer Raw in iPhoto as External Editor, so when I click on edit in IPhoto,
automatically opens my JPG in Camera Raw. After editing in Camera Raw I'm clicking on ,,Save image" then destination is ,,Save in same location" When I go back to iPhoto to the same photo, iPhoto does not show any changes I have made in Camera Raw.
What could it be or should I set something in iPhoto or in Camera Raw?
Is there a chance in order to deal with this?
I will be grateful for any assistance and
I'm waiting for advice
Dawid

Any time a RAW file is edited in any 3rd party editor from within iPhoto it MUST be saved to the Desktop and imported as a new file. There's no other way to do it. So the photos you've edited and saved are somewhere in the iPhoto Library folder system but cannot be recognized and used by iPhoto.
The following is geared for Photoshop and Photoshop Elements but might have some info relevant for you:
Using Photoshop CS3 or Photoshop Elements 9 as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's Advanced Preference Section's under the "Edit photo:" menu.
Click to view full size
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
Click to view full size
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 9 the Saving File preferences should be configured as shown:
Click to view full size
s I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Click to view full size
NOTE: If you want to use both iPhoto's editing mode and PS/PSE without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in iPhoto". That will let you either edit in iPhoto using the Edit button or Control-clicking on the thumbnail and selecting "Edit in iPhoto" or in PS/PSE by Control-clicking on the thumbnail and selecting "Edit in External Editor" in the Contextual menu.
Click to view full size
This way you get the best of both worlds.
OT

I can open RAW files from my camera in photoshop cs5, but they dont save properly after editing

I can open RAW files from my camera in photoshop, but then after I have edited, i save as .raw, and open up the newly saved file and it just comes up as a grey messed up picture. What am I doing wrong?

r_r_a_a wrote:
I thought that it was preferrable to do editing on RAW files rather than TIFF for highest image quality.
Yes, it is preferable to do as much editing on the raw files as you can including global and local tone & color correction in Camera Raw...but there is a limit to the work you can do and sometimes you must go ahead and render the raw file into Photoshop for additional work. Then you'll be needing layers and other functionality that can't be done on a raw file. At that point you'll need to save as a TIFF or PSD. If you work in 16 bit and a large enough color space, the TIFF or PSDs will still be capable of the highest quality...as others have indicated, the Photoshop .raw file format ain't for photography per se.

Can layers be used to further edit a photo in Elements after editing in LR? [was:Tacoma Grandma]

Is there a way to use layers to further edit a photo in Elements after editing in Lightroom?

The "Edit In" option of Lightroom is the usual way. This creates a new image that PS / Elements can work with. The starting image and the new image (showing the results of your editing, once those are saved) both then appear in Lightroom.
Exporting does not pair up LR and Elements (or other image editing program) in quite the same easy and transparent way.
As to the Layers query: probably the most usual format chosen for external editing is TIFF, but PSD is also used. Both preserve any layers intact when saved (unlike JPG) allowing returning to a layered file for further editing in the future. These editing files include a further fullsize preview, if layered (this is unnecessary for a flattened file, in which case LR can just read that Background layer directly).
The preview is a losslessly compressed full colour bitmap, updated at each time of saving, representing the then-current combined appearance of the "layer stack" as seen within Elements.
Lightroom cannot understand about whatever pixel and adjustment layers, layer interactions and effects etc the file may contain - but it doesn't need to, because it can look at the "compatibility" preview instead.
RP

After editing photos on the iPhoto can i keep the original date of the picture,(when it was taken).thanks

can i recover the original date of the picture whenit was taken after editing with iphoto.

You do not need to do anything - editing a photo in iPhoto does not modify the original date of the photo - that is a part of the photo informatiopn (in the EXIF data) - the only way to modify it with iPhoto is to use the modify date/Time command
LN

I need an app that I can write on my photos, then edit what I've written after I transfer the photo onto my computer. Anyone know of any apps that will do that?

I need an app that I can write on my photos, then edit what I've written after I transfer the photo onto my computer. Anyone know of any apps that will do that?

Try to contact iTunes support here:
Apple - Support - Express Lane - Product Selection

When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
THANKS LLOYD

BARBARA,Yes, you are so right, I was deceived by the eve button, Just tried it and it WORKS GREAT-Thanks for the help.
THANKS AGAIN AND HAVE A GOOD DAY Lloyd
From: Barbara B. <[email protected]>
To: Lloyd Bennett <[email protected]>
Sent: Tuesday, January 13, 2015 11:46 AM
Subject: When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Suddenly, when I attempt to edit a RAW photo in iPhoto it turns a dark shade of green and won't allow me to adjust exposure.

I have an iMac with a 3.4 GHz Intel Core i7 processor and running OS X version 10.9.5. I have iPhoto 9.5.1.
Suddenly, when I attempt to edit a RAW photo in iPhoto, it turns a green shade and won't let me adjust exposure. I can view the pictures in the events page just fine. However, I'm noticing that when the RAW pictures turn that green shade they tend to stay green regardless of when I'm in edit mode or not. Please help.

Did you install RAW update 5.07 recently? Mine was installed 9/18 - look under updates in the App store.
As to TM I suggest you not mess with its backups - it manages them and makes space as required - it builds a complex set of data so it can restore any file at any time for as long as possible - if you mess with its data you may cause problems for future restores - see Mac Basics: Time Machine backs up your Mac
If your backup drive fills up
As your backup drive begins to fill up to its capacity, Time Machine intelligently deletes the oldest backups to make room for newer ones. It also alerts you if the "Notify after old backups are deleted" option is selected in Time Machine preferences.
LN

After editing a RAW photo, can it be saved as a RAW photo?

Similar Messages

Maybe you are looking for