After editing camera raw and export as jpeg,image becomes overexposed when view on light room..please advise.

need some help here. don't know if i can describe this accurately.
i was using lightroom previously. edit my raw file and then export in jpeg. everything appear normal as what i wanted.
recently i got cs4 and started using bridge. now after i edit my photo in lightroom and export,the view of the jpeg file appears overexpose(exposure was increase) and when view on adobe bridge same problem. but if i open photoshop and use my workspace colour setting everything is ok. when i see my picture on iphoto it is normal as per i have edited. i just don't know what setting i have touch that cause my viewing of edited photo on lightroom and bridge goes overexpose. on bridge,thumbnail ok but preview bad...
for the record: i just install CS4 and snow leopard recently. before this i have no problems with LR. I'm also not sure if i have accidentally change any settings.
i shoot with a 5D mark 2 and use the raw file for edit.
will appreciate any advise. Thanks

grjacek wrote:
Is it possibe to return to a RAW image and edit it once I've exported it to another location as jpeg?
Yes
I've edited and exported an image to a different folder on my desktop. I've realised I still need to do some work on it
but when I try and open it again in Lightroom ( I see it in Library) I get a mesaage saying file not found...Please help
We're going to need a lot more details aobut exactly (EXACTLY) the steps you follow after you do the export, because normally I would say this is one of the easiest things possible in Lightroom. Are any files moved or renamed or disks unplugged in between the time of export and the time when you try to edit again?

Similar Messages

Every since I updated to the latest Camera Raw and Photoshop I have the following issue: when I finish the photo in Raw and bring it into Photoshop I have white squares in the Photo. If I crop the photo the white square disappears until I zoom to enlarge

Every since I updated to the latest Camera Raw and Photoshop I have the following issue: when I finish the photo in Raw and bring it into Photoshop I have white squares in the Photo. If I crop the photo the white square disappears until I zoom to enlarge it then the white square reappears. I do not believe the squares are saved

Does turning off »Use Graphics Processor« in the Performance Preferences and restarting Photoshop have any bearing on the issue?
Please read this (in particular the section titled "Supply pertinent information for quicker answers"):
http://forums.adobe.com/docs/DOC-2325

No changes appear when batch editing Camera Raw Files and saving as jpegs

When I batch edit my raw files, including saving the file as a jpeg, from bridge or photoshop the resulting file saved never includes any changes I made in the Camera Raw editor. For example if I have lightened the photo by changing the exposure in Camera Raw as a saved jpeg after batching the file is still as dark as when originally shot. Is there some little box I forgot to check or something? Thanks!
andy

I've seen something like this, but have not figured out why yet. In my situation I select a group of images in Bridge and go to Tools / Photoshop / Image Processor.
There I click the "open first image to apply settings" box.
Save in Same Location
Save as JPEG, resize to fit (1200 pixels), Convert Profile to sRGB.
No Action selected
Include ICC Profile
Run it and in Camera Raw roll the saturation down to -100 (convert to b&W).
Click "Open Image"
The process runs and the first image is converted to b&w, but the others are not.
John

Edit camera raw in Bridge stopped working CS5 (and star rating removed)

I have always had the 'double click edits camera raw settings in Bridge' setting enabled. Half way through editing a batch of 1000 images, instead of opening in Bridge the image opened in Photoshop. I checked the selection in Bridge, re-enabled it, closed Bridge and opened a few times, re-enabled again, re-booted my system, but it still opens raw files in Photoshop. This is extremely irritating as I now have to switch windows every time I go to do the next edit. I don't need Photoshop running for 90% of the edits I am doing. I made no changes to my system during the time that I was editing.
Any ideas?
Stuart
PS
At the same time as this error occurred Bridge now removes star ratings as in the following sequence:
1 Give image 3 *
2 Double click to edit and raw file opens in Photoshop
3 Edit and save image.
4 Click done and return to Bridge
5 The 3 * rating has been removed and the saved jpg also has 0 *
PPS
I have partly solved the problem. I normally convert to DNG but did not do so on this occasion. In the batch were files from a Canon 5D and and Canon 5D mkII. A very small number of the 5D files have the problem above. I converted all these to DNG and I can edit normally. But I am still at a loss as to why some files exhibit this strange behaviour.

The forum is not dead; moribund, perhaps. :-)
You do realize that this is a user forum, don't you? This is not a conduit to address Adobe.
The volunteer contributors who give their time free of charge here respond to questions if and when they think they can help, if they know the answer to a question, and if they think the original poster has provided enough, detailed information. No one has any obligation to answer questions.
My use of Windows is, mercifully, restricted to an absolute minimum these days, otherwise I would have attempted to extract more information from you about your machine and system.
At this point, I don't have more Windows tricks to offer you other than to uninstall and do a complete re-install of Photoshop.
Therefore, the boilerplate-text advice that follows is simply meant to encourage you to provide more information so that one or more of the Windows wizards in this forum may be moved to respond to you.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them, etc.,
someone may be able to help you (not necessarily this poster).
A screen shot could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

I edited a .nef file in Camera Raw and PSE 11 saved it as a .xmp file. I cannot open it now.

I edited a .nef file in Camera Raw and PSE 11 saved it as a .xmp file. I cannot open it now.
I am not sure if this is an issue but Windows does not recognize the .xmp file and give it an icon with the photo's picture. On a related note, when I edited some .nef files and Windows saved it as .dng file, it too, like the .xmp file, Windows does not recognize the .dng file and give it an icon with the photo's picture.
Do I need to download something to create this icon?

PSE didn't save your file as an .xmp file. The .xmp file is not the image--that's still the .nef. The xmp file is what adobe calls a 'sidecar' file, just a record of the settings you used in the raw converter. As long as it's in the same place as the image, when you open the nef in ACR again, it will open where you left off, with the settings you chose.
If you want to save as, you have two choices:
1. Click the Open button in the raw converter window and save in the image format of your choice.
2. Use the Save button in the raw converter to create a separate DNG file, which still must be opened in the raw converter and converted to an image format for use in other programs.

Proble with Before and After in camera raw

The problem that I am having is the before and after in Camera Raw. When I press the P key for before and after; CR display the before and after to whole changes that I made and not just to one section. Let say, I am in the Detail section and Just want to see what changes I made in the Detail section only. I used to press the P key, but now I am seeing all the changes that I made to my file. I am using Adobe Photoshop CC and all my software is updated. I appreciatre a fix to this problem with many thanks

Alternatevely you can take advantage of the new function recently introduced in CC. Press "Q" , this will split the monitor in two, (either vertically or horizontally) and each time you go to a new tab and make some change you can go back to previous state by clicking the icon in the bottom right corner (see the picture).
as you can see..you can "toggle between current settings and defaults for the visible panel"

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited in iPhoto first and sent to PE13 for adjustments, it can be sent back to iPhoto library. Ideas?

After editing a RAW image in PE13 I can't get it back into my iPhoto library. If edited first in iPhoto, and sent to PE13 for adjustments,
I can get it back into my iPhoto library. Ideas?

Thanks for answering my question. I always have had RAW checked to an external editor which is PE13 on my Preferences panel in iPhoto.
I probably didn't make myself clear. When I send an ORIGINAL RAW untouched, unedited image to PE13 and do the editing and the
adjustments- (it looks great) and then try and SAVE it and forward it to my iPhoto library, it will not be sent. On the other hand if any editing
at all is first performed in iPhoto and then sent to PE13 for adjustments, and I SAVE it, it asks if I want to Replace this new edited image with
what already exists in my iPhoto library, I click REPLACE, the little wheel spins, I go to iPhoto and the new image is there. PE13 does
accept an original RAW image for editing because it will save it in PE13 in the RECENTLY EDITED column. Ideas? I need to keep my iPhoto
library intact. Ideas? Thanks.

Everytime I open Photoshop Elements V13 I get the message that an update to V13.1 and Camera Raw 8.7.1 is available. However when clicking on update now or after exiting it never updates. Also there is no updates shown for V13 on the website.

Is this a false message, or is there an update available? If so How do I update my version?

Hi,
It is not a false message, those updates are available. (I have overlaid the camera raw info here)
If you load the editor, when you get told about the updates, and you click on Update, it may take a moment to get going.
If you are on a Windows system, you may find that there is a User Access Control request icon flashing on your taskbar. I'm not sure about MAC systems.
Brian

"Save image" button of Camera Raw does not save JPEG with modifications made.

I am using Bridge CC to process my RAW images and make modifications to some JPEG images as well. I have no need to further alter images in Photoshop at the moment, so I do all modifications in Camera Raw. After altering my images, I then press the "save image" button at the left bottom corner of Camera Raw and choose the settings to save in JPEG. However, when I upload these JPEG images to a website or when I email them, the image is uploaded without the modifications I had done! It seems to me that Camera Raw is saving JPEGs the same way it does for RAW images, in a non-destructive manner, only attaching instructions for the images to be displayed properly on Photoshop. But when I save an image in JPEG, I expect the image to be saved entirely with the modifications I made while still keeping the original RAW file. What goes on then? What is Camera Raw doing and how do I get to save a modified image in JPEG with Camera Raw? Would you please explain?
Many thanks for your help,
Beza

Hi,
What version of camera raw and operating system are you using?

Why do my raws look different when I view them in Adobe Bridge/Adobe Camera Raw and Canons Digital P

Hello all,
I am sorta new to taking Raw photographs and I have been been using Adobe Bridge/Camera Raw to edit. When I take my photos (I am using a Canon t2i) I have it set to save a raw and a jpg. When I view these images in Adobe Bridge/Camera Raw I notice a clear difference in the jpg and raw (I understand the whole concept behind raw vs. jpg. so im not questioning why one looks different) It is obvious all the adjustments that were applied to my jpg. vs the natural raw. My question is: When I view the same two images in the software that came with my camera, canon digital photo professionals, the canon and raw look almost identical.... My assumption is that canon is applying the same "adjustments" to my raw as it did to the jpgs? Has anyone used these two programs and noticed this?
Thank you in advance for your assistance.
Michelle

Can't say I'm an expert on DPP myself either. I've only run it a few times myself.
If you're seeing Photoshop freeze just by looking at the File Info tab, that's certainly not expected and you should start a tread specifically to discuss that. The forum may be able to help you get that working.
I happen to like the color my camera delivers in its embedded JPEGs (which I use to quickly review shots via IrfanView). Starting with that color in Camera Raw by default just feels very natural and integrated.
Without a specific custom profile to help you with the task, here's my suggestions for the next best thing:
1. Take an image with a range of different colors in it.
2. Open the embedded JPEG also using whatever means you have to do so.
3. Open it also in Camera Raw and make sure you're using the Camera Raw default parameters.
4. Go into the Camera Calibration tab (little camera icon), and choose the Camera Standard profile as provided by Adobe.
5. Tweak the various sliders so as to match the color between what you're seeing in the JPEG and Camera Raw.
6. Save new Camera Raw defaults.
Some notes:
Make sure you leave the White Balance on As Shot, since storing a specific white balance is probably not going to be helpful.
Test your settings and repeat the above to tweak them as needed using other images.
Keep in mind that not every application does proper color-management. IrfanView can be set up to do so, and I don't recall whether you have to tweak a default setting to make it do that or not (it's been a while).
Hope this helps!
-Noel

Camera raw and bridge: no dialogue in cs3

After purchasing the Nikon D300 I had to upgrade from CS2 to CS3 as former versions of photoshop are unable to manage the RAW files (NEF) generated by the new camera.
My problem is that, even having downloaded the 4.3.1 version of Camera Raw and having installed it, there is no dialogue with bridge. I tried to reinstall CS3 as well.
This means:
- I miss the Camera Raw preferences setting (under the edit menu in bridge)
- Always in Bridge I cannot cut and paste (copy and apply) camera raw settings of one photo to others. Neither selecting the edit menu, nor with the mouse's right button.
The point is not that these and similar selections do not work, the point is that they do not even appear in the menus. The help resources, for instance, tell about a Edit > Develop Settings function that is not present in my menu.
What is wrong? Is it possible that there is any kind of conflict with Nikon capture NX?
I'll be grateful to anyone able to help me,
fm

Hi All,
Been reading this thread with interest.
I am on PC with XP, I have been using CS3 for quite a while now and both my D200 and D300 have all been working perfectly. But over the last few months I have noticed that Bridge was (a) very slow to start and (b) would suddenly come up with the "Bridge has encountered a problem and must close" message. Then it got to the stage were Bridge would not open at all and just the "Problem" message would show and then next PS3 then starting displayed the "There has been a cataclysmic Failure" message.
So I have used the original CS3 CD and uninstalled and reinstalled and got both programs working but no Camera Raw. If I click on the NEF file it goes to PS and gets the message wrong file type. All the preferences are set ok.
The other thing that happened was when I downloaded all the updates, Bridge went back to not opening and the "problem" message showing again.
After reading Xoslic message I will try to take out the registry entries and reinstall again and see if that works.
For all of you on Nikon, CS3 was working perfectly for me until just recently, so I know that it does work fine.
Hopefully I will get a soloution and let you know if it works.
Gerry
PS. I also had a problem in that Lightroom 1.4 would not work either, opened ok but "lightroom has encountered a problem" message appeared and it closed down. Other people suggested that the problem lay in "Version Cue"

Adobe Camera Raw for Nikon - generate JPEG with color off

Hi,
I am learning Photoshop and Camera RAW. I am using CS2 and ACR 3.7 on Windows XP.
I have noticed that the JPEG file generated by CAMERA RAW has the color slightly off (towards the bluish direction).
This is what I did, I started Adobe Bridge, I opened up the Nikon RAW file (from D200) with Camera RAW and then generated the JPEG file without using any AUTO or custom setting (took the As SHOT setting). After the JPEG file is generated, I compared the JPEG file, with the file on Camera RAW window, the color of the pictures don't match up. So what you see on Camera RAW window is not what you get in JPEG. The color shown in the Camera RAW window is warmer than the JPEG file. I used the Widnows default jpeg viewer and the Arcsoft Editor to look at the JPEG file, and confirmed the color of the JPEG file is off from the original RAW filed viewed Camera RAW widnow.
However, when I opened that same JPEG file (generated by Camera Raw) in Adobe Photoshop, and the original RAW file (without any modification) in Photoshop, the color of the JPEG file matches up the color of the original RAW file only in Photogroup. I am confused now.
Why the color of the JPEG file (generated by Camera RAW) looks OK on photoshop, but it is off in other viewers (default Windows viewer or ArcSoft Editor). However, when I used PictureProject (supplied by Nikon) to generate the JPEG file from that same original RAW file (without any modification), and I looked at the JPEG file (generated by PictureProject) on Photoshop, Arcsoft Editor, and default Windows viewer, the color matches up to the original RAW file on all viewers. So the problem only happens to the JPEG file generated by Camera Raw. Any idea?
Thanks,

When you saved out the JPEG in Camera Raw, what color space did you save it with?

Why the colors look so different betweet my Camera Raw and Bridge?

We know that after editing images in Camera Raw, thumbnails in Bridge will updated according to the new xmp files.
However, for some of my Raw files, the colors look very different in Bridge after makeing adjustments in Camera Raw, I can see more red in those phoots. But when I reopen the file in Camera Raw, all the colors are just correct.
For those photos without applying xmp files the colors looks exactly the same in Camera Raw and Bridge.
Does this means that my Camera Raw and Bridge use different color space? How can I fix this problem? Thank you

If you want help, you need to specify your platform (Mac or Windows), the exact versions of your Operating System, Photoshop, ACR plug-in and Bridge.
Also look at your Bridge preferences and tell us what you have your Thumbnail preferences set to.
Re-setting your preferences and purging the cache would also help. It could be something as simple as a corrupt cache.
Bridge is Color Managed, but it does not use a color space of its own. It applies the color space with which each image is tagged, it assigns sRGB to untagged files.
When was the last time you calibrated and profiled your monitor?
Details would help.
Wo Tai Lao Le
我太老了

RE: Camera Raw and Smart Objects

Hello Everyone.
I have a question please.
Inside the Camera Raw 8.1, Inside the Workflow Options, I Checked the Box for Open In Photoshop as a Smart Objects.
I noticed Inside the Camera Raw, Open Image box turn to, Open Object box. I click on open, and It opened the Image as a Smart Objects Inside the Photoshop.
If I make any changes to the Image, and If I Double Click on the Smart Object, It will Open In Camera Raw again which Is good.
I also noticed If I do any changes to the Image Inside the Camera Raw to the Smart Object after clicking on Open Smart Objects I see the changes Inside the Photoshop also.
But If I do any changes to the Image Inside the Photoshop,and later I Double Click on the Image the Image opens Inside the Camera Raw, without any changes.
This Is my question: The Smart Object Image Is still a Raw Image ?
This Is my next question:
I know If I open a Raw Image Inside the Camera Raw, and If I click on Done, the image is still a Raw Image, which Is good, and If I click on Reset Bottom, It will reset It back. If I only change the White Balance and Click on Done and go back to the Camera Raw again, and I choose As Shot, the Image goes back the Original Raw file.
But If I do other changes such as the exposure, any color change, and click on done I can never go back to the original..
In the past month I been working with the Lightroom, and I noticed if I open a Raw image Inside the Lightroom, and do any changes to that Image,, any time I can click on the Reset and the Raw image goes back to its original.
I don't think we can do this with Camera Raw can we ?

Clear removes the Camera raw settings completely. You will not see the adjustment icon on the thumbnail in Bridge
Camera Raw Defaults will show the icon and double clicking the thumbnail will always open it in Camera Raw with the Default settings. The Default is "As Shot", which is why you don't see any difference. It's when you choose a Custom Default that you will. It will stay with the Camera Raw file.
See this article by Julienne Kost.
http://blogs.adobe.com/jkost/2009/10/setting_new_camera_raw_default.html
Another difference is with Jpegs. Open a Jpeg in ACR, make an adjustment, click "Done". Select "Camera Raw Defaults" and it will always open in ACR instead of Photoshop. Select "Clear" and it's a normal jpeg that will once again open in Photoshop.
Basically that's about all I know, I normally don't use ACR much.

After editing a RAW photo in PE13 (my External Editor) sent from Apple's iPhoto, I can not reimport the edited photo bank into my iPhoto library. The "Import to Library" command is greyed out. This was not the case before the latest PE13 RAW update versio

After editing a RAW photo in PE13 (my External Editor) originally sent from Apple's iPhoto, I can not reimport the edited photo back into my iPhoto library. The
"Import to Library" command is greyed out. This was not the case until the latest PE13 update (Camera Raw Version 8.7.1.311). What needs to be done
to reimport edited photos back into my iPhoto library? Ideas?

Launch PSE Expert Mode and go to:
Photoshop Elements Editor >> Preferences >> Saving Files (tab)
Set the drop-down dialog
On First Save : Save Over Current File
Click OK.
When you have finished editing in PSE use Cmd+S to save (not Save As)

After editing camera raw and export as jpeg,image becomes overexposed when view on light room..please advise.

Similar Messages

Maybe you are looking for