After editing, photo goes to end of film strip and I lose my place

In the beta, in develop mode, I would work on a file, go to CS3 for some editing, then back, and then export jpeg. Now, my work flow gets a little messed up with 1.1 because after I export, the photo I was working on disappears to the end of the film strip and my film strip is at the end. So, I keep losing my place. Is there a way to go back to the beta way by setting some preferences somewhere? Thanks in advance for any help.

Sara-
It sounds like your sorting is set to "by edit time" or some other that's sending it to the end of the line. Also, work inside of one folder at a time.

Similar Messages

After editing photos in iPhoto

There are some photos that I have edited and would like to have them remain permanently in their edited format. After editing photos I open iTunes to update (sync) my photos onto my iPhone and iPod, however the photos that I edited remain in the original condition on my iPhone and iPod. Is there any way to have the edited photos synced in the edited condition when syncing my photos to my iPhone & iPod?

Welcome to the Apple Discussions. Here's how to use PSE correctly with iPhoto:
Using Photoshop (or Photoshop Elements) as Your Editor of Choice in iPhoto.
1 - select Photoshop as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements 6 the Saving File preferences should be configured: "On First Save: Save Over Current File". Also I suggest the Maximize PSD File Compatabilty be set to Always.
If you want to use both iPhoto's editing mode and PS without having to go back and forth to the Preference pane, once you've selected PS as your editor of choice, reset the Preferences back to "Open in main window". That will let you either edit in iPhoto (double click on the thumbnail) or in PS (Control-click on the thumbnail and seledt "Edit in external editor" in the Contextual menu). This way you get the best of both worlds
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..

After editing photos in pse9 how to download to cd

after editing photos in pse9 how do you download to c d.

Save the edited photos in a folder
Burn the selected files to disk with your software.

Im using a macbook air and my finished edited photo is different when it the develop and library mogul why is this

Im using a macbook air and my finished edited photo is different when it the develop and library mogul why is this

On your iPhone ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
Then tap Settings > General > Date & Time
Switch: Set Automatically ON
No data is lost due to a reset.

When I click on the iCloud icon it says that it will download without additional charge because I've already purschased it but after that it goes back to the icloud icon and doesnt download. How can I download it?

Im having trouble downloading the iMovie app on my iPad. When I click on the iCloud icon it says that it will download without additional charge because I've already purchased it(I did purchase it) but after that it goes back to the icloud icon and doesnt download. How can I download it?

Hello bianca,
It sounds like you are trying to download a previous purchase to your iPad but the item never downloads. I would recommend starting by closing all the apps that are running in the background.
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Double-click the Home button.
Swipe left or right until you have located the app you wish to close.
Swipe the app up to close it.
When you have done that, sign out of your iTunes account in Settings > iTunes and App stores, and restart the phone and try again:
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/ht1430
If the issue persists, I would next backup your device to iTunes, and restore it:
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Regards,
Sterling

My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?

My iPod nano will go into the sleep mode while a song is playing a second after the screen goes blank; the song will stop and I will then have to press the sleep/awake button to pick up where the song left off. How do I fix this?

Your problem is that your iPod is not sensing that your headset is inserted. There is a pin inside the headphone port on the Nano that senses if it is inserted fully. If it does not sense anything, it will pause playback to save battery power when the screen dims. Here are the solutions:
Insert it fully. This will fix it for most of you. Press that thing in there all the way. You should feel and hear a full click when it is fully seated. If you can see ANY silver of the headset jack, it is not fully inserted.
Debris inside the headset port. If you are totally unable to push the headset jack all the way, the most likely problem is that you have crud inside your headphone jack. Try blowing it out or slapping it against your palm with the headset port facing your palm to try and get the stuff out. If you look into he jack with a light, you should be able to see to the bottom. The entire inside of the headset port is white, so if it looks dark at the bottom, that is the crud that is keeping your nano from working.
Headset jack or plug issue. If you cannot solve the problem with 1 or 2, then there is likely something physically wrong with either the headset jack on your headphones or the headset port on the nano.
If none of the above works, you need to take it to the Apple store or wherever you purchased it. I think they are still under warranty.
i

How can I transfer photos from my iMac to my iPad and not lose the ones already stored on the iPad.

How can I transfer photos from my iMac to my iPad and not lose the ones already stored on the iPad? When using iTunes to sync a folder from the iMac to the iPad it always removes anything previously synced.
Help appreciated
David

I've just found out the reason for this behaviour. I am syncing from a computer which is different to the one I first synced with. iTunes can't cope with this situation so deletes anything synced from another source.

My iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Edited photo goes black!

Hi!
I can't find any solution in the web..... somebody can help?
It happens with not all the photos, it's randomly, mostly in raw but in JPG too.
Sometimes, when I edit some adjustment (anything) in some photo, and with the photo maximized (in window or full screen mode, it's the same), the photo goes completely black!. And after that happens, any photo that I open it looks completely black. If I close the photo and see in the small browser it looks ok, but anytime I maximize the photo (or any other one after that) looks black.
But, if I close the Aperture and open again, it works ok and the photo has the adjustments ok and i can use it in anyway and all the photos. Until te next time, if it happens again, with that or another photo. And then I close Aperture and open again and continue working.
So, it looks like a representation in the screen problem. It doesn't affect the image file. It's some kind of rendering problem with the image in big size.
Any idea ????
Of course, I tried rebuilding the library, etc.
And I have a Macbook Pro 13 Early 2011 (Intel HD 3000), with latest Mac OS X 10.9.3 (13D65), latest updates of everything, and latest Aperture 3.5.1
Thanks!

Good morning.
It sound like there may be something happening within the iPhoto database that is causing some issues. Fortunately, we have an article that goes over how to rebuild that library. I would reccomned following the steps listed in the article below.
iPhoto 6 and later: Rebuilding the iPhoto library
http://support.apple.com/kb/ht2638
Hope that helps,
- Griff W.

Help! I'm unable to close elements 9 after editing photos. Now what?

After editing a photo in elements 9 and saving I am unable to close the program......does anyone have any advice? I have tried everything and end up just having to shut down my computer to get out of the program and then restart.

Try quitting by using the keyboard shortcut
Ctrl+Q on Windows or Cmd+Q on a Mac

After Edit Library Item- "Premature end of JPEG file"

Hello, I'm using Windows 7 Home Premium 64-bit. In DW CS5 after editing a Library item and saving, DW asks if it should update pages containing the item. I tell it to go ahead, and after some processing I get an error box titled "JPEG Library Error." The message is "Premature end of JPEG file." Nothing else except "OK"! I can't imagine what this is referring to or if the error is causing the pages to not be updated with the edited lbi. I don't have any JPEG images i nthe Library item. Here's a link to the Libraty item:
http://www.techno-archive.com/Library/bottom_menu.lbi
After I dismiss the error in DW the Update Pages dialog sits there with the Done button grayed out. The bottom few lines of the log look like this:
updated gallery_rec\trees\firetree\firetree-sky2.html
    item Library\bottom_menu.lbi
updated gallery_rec\trees\firetree\firetree-tree1.html
    item Library\bottom_menu.lbi
updated gallery_rec\trees\firetree\firetree-tree2.html
    item Library\bottom_menu.lbi
updated gallery_rec\trees\firetree\firetree-tree3.html
    item Library\bottom_menu.lbi
updated gallery_rec\trees\firetree\firetree.html
    item Library\bottom_menu.lbi
Done.
files examined: 641
files updated: 641
files which could not be updated: 0
total time: (0:00:19)
Updating F:\techno-archive\
Done.
files examined: 15697
files updated: 0
files which could not be updated: 0
total time: (0:00:57)
It doesn't tell which pages got updated and which didn't or why those that didn't did not get updated.
Any ideas anybody?
Thanks, - Dave

Update- Solved!
An answer to this thread dated April 30, 2009 of the same subject by David_Powers, community Professional, did the trick. I wound up renaming the DW Configuration folder in C:\Users\dmckeen\AppData\Roaming\Adobe\Dreamweaver CS5\en_US\Configuration (where dmckeen is my username) and letting DW rebuild it.
Thanx

After editing photos on the iPhoto can i keep the original date of the picture,(when it was taken).thanks

can i recover the original date of the picture whenit was taken after editing with iphoto.

You do not need to do anything - editing a photo in iPhoto does not modify the original date of the photo - that is a part of the photo informatiopn (in the EXIF data) - the only way to modify it with iPhoto is to use the modify date/Time command
LN

Unable toupdate an album after editing photos externally (i.E.: photoshop)

I took a photo album and converted it to a book. After laying out my book, I want to edit the photo's externally with Photoshop (Removing date stamp on digital images, better effects and quality control).
How do I update my album/book with the changed/edited images?
PowerPC G5 Mac OS X (10.4.10)

ParkGroup:
To get iPhoto to recognize the edits when using a 3rd party editor like Photoshop or Photoshop Elements you first must select it in iPhoto's General preference section's Edit photo: menu.
Next, double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing and hit the Save button, if you get the JPEG Options window at the next step just go ahead and click on OK.
However, if you get the navigation window indicating that PS wants to save it as a PS file you'll need to select jpeg from the menu and save or click on the desktop in the Navigation window and save it to the desktop and import it as a new photo.
Editing a photo in PS directly from the Finder will result in iPhoto not knowing that the file has been edited and it won't show up in the Modified folder nor will the thumbnail be updated.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Edited photos are not reflected in iPhoto 08 and a bonus question

I'm using iPhoto 08 to upload photos from my DSLR. I then drag them into Photoshop for editing and save them from that application. When I go back to iPhoto they still show the unedited version. If I drag that photo back into Photoshop, it is indeed the edited version.
Is there a setting to show the edited version in iPhoto 08?
2nd question:
When I use the finder application to navigate to the location of my iPhoto library, I can't "dig"any deeper than the iPhoto application. I know I can "show file" from iPhoto, but it some cases, I'd rather just navigate to the location through finder. Can this be done?

mil8 wrote:
I'm using iPhoto 08 to upload photos from my DSLR. I then drag them into Photoshop for editing and save them from that application. When I go back to iPhoto they still show the unedited version. If I drag that photo back into Photoshop, it is indeed the edited version.
Is there a setting to show the edited version in iPhoto 08?
No - once you export a photo, you own it and iPhoto has nothing more to do with it until you import it back into iPhoto (which in your case is not what you want because it duplicates the photo in your iPhoto library)
-- BUT
There is a setting to make photoshop the editor for iPhoto and if you use that your photos will be correctly reflected in iPhoto
iPhoto menu ==> General ==> edit photos "in application" and select photoshop as the application
Now when you edit a photo in iPhoto it will pass it to photoshop, you will edit it and save it (NOT SAVE AS) and the edited version will be part of your iPhoto library
2nd question:
When I use the finder application to navigate to the location of my iPhoto library, I can't "dig"any deeper than the iPhoto application. I know I can "show file" from iPhoto, but it some cases, I'd rather just navigate to the location through finder. Can this be done?
see this thread for instructions, warnings and discussion of direct access to your photos files
http://discussions.apple.com/thread.jspa?threadID=1218128&tstart=0
Larry Nebel

Selecting same photo in film strip and library module

When I select a photo in the library module, the same photo is not selected in my film strip, how do I change this?
The problem is when I select a photo in the library and then click develop, the photo that loads in the develop module is the one I have selected in the film strip, not the one I just clicked on in the library module. In my previous version of LR when I select a photo in the library module the same photo would become selected in the film strip so this problem would never occur, I am trying to find a way to restore this setting.
Also when I click "Ctrl A" in the Library module it selects all photos in my film strip, I would like to select all photos in library module instead so I can click "Sync Settings".
Thanks for your help!

What version of Windows? I'm using Windows 7 with 8 GB RAM, and don't see those problems. I would suggest that you upgrade to the current version, 5.7.1.
Product updates
The other suggestion would be to delete your Lightroom preferences so that Lightroom can generate a new preferences file.
Preference and other file locations in Lightroom 5

After editing, photo goes to end of film strip and I lose my place

Similar Messages

Maybe you are looking for