After editing the iisproxy.ini with a differnet IP address do I need to do anything else?

I changed the iispoxy.ini file on MS ISS server to point to a new
weblogig server ip address but I get a timeout error when trying
to proxey to the new server.
Do i need to do anything else to the server to make this connection
work.

Hi Joe,
The encoded assets are imbedded inside your iDVD project package. When you updated your footage, did iDVD detect the asset change and ask you to update the project? If it didn't, it might not have re-encoded some of your DVD footage. You should preview your disk image with Apple DVD Player to be sure. The encoded assets can be deleted with the Advanced > Delete Encoded Assets menu command and save your project.

Similar Messages

  • I have just brought a I pad mini i have followed the instructions and i am on the main screens with icons,but dont seem to be able to load anything else unfortunately i am used to the andriod net works so was wondering if someone could help me to put goog

    i have just brought a I pad mini but i am having problems loading icons onto screen keeps telling me i have no internet eventhough in settings it shows wifi is on wondering if you can help, i am only used to the andriod systems

    You posted a comment to your question as a new post. Post comments to your original post or no one will know what your problem is.
    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Error in saving .aspx pages after editing the XSLT

    Hi,
    I am developing a SharePoint 2010 web app and I had to do some modifications for a .aspx page which has a data form web part and I am encountering following issues:
    1. After selecting the web part, when trying to modify the filter criteria of the data source, the "group" and "ungroup" buttons are seen as disabled and the option of editing in the XSLT editor is also not visible.
    2. after editing the XSLT, knowing that there are no issues if I try to save it an is showed saying null value issue and asking whether to allow scripts to run in this page r not. After choosing either yes or no, when I try to preview it in browser I get
    an error in the place where I have the data form web part saying error with web part try to edit it in SharePoint editor such as SharePoint designer.
    3. this is happening only i try to edit the code but no matter how many copies I get from the original page, they are correctly previewed in the browser unless I try to edit it.
    your kind support or suggestions are highly appreciated as I am unable to fix this
    thanks.

    Data you are changing is on the frontend. You need to pass data to backend (server). The static method 'dispatch' of control framework class (CL_GUI_CFW) is used to do this 'manual' synchronization. It is sort of helper method of control framework (which is basis for ALV controls) and is independent of ALV controls (cl_gui_alv_grid etc.) that are used.
    Try putting this code as suggested and check.
    short code would be (without error handling)
    CL_GUI_CFW=>DISPATCH( ).
    null

  • Using CookieName in the iisproxy.ini file

    Hello All,
              According to the Weblogic 451 docs, In the IISProxy.ini file, you should
              set the "CookieName= "
              property to whatever value you have specified for the
              "weblogic.httpd.session.cookie.name="
              property in your weblogic.properties file. (If it is anything other than the
              default name which is "WeblogicSession").
              We have an IIS proxy fronting 2 Weblogic App Servers which run in a
              clustered mode. Also the
              cookie name is specified in the properties file to something different than
              the default WeblogicSession
              (lets say it is "mySession").
              When we do this we see the strange behavior of the application routing us
              back to our Login page in the middle
              of a session. We assume this is happening because when our request is
              switched to a different App Server it
              cannot be associated with any session. And so we are asked to login and
              create a new session.
              This started happening only when we switched to using IIS Proxy and have the
              CookieName
              set to "mySession". This problem goes away if we change the cookieName to be
              the default and remove
              the entry from the IISProxy.ini file.
              Our App Servers are running Weblogic 4.5.1 with sp8.
              Any ideas ??
              Thanks
              Ketan.
              

    The cookie name in your ISAPI plugin and weblogic.properties should be the
              same in all your plugins and weblogic servers. This is required. Plugin and
              WLAS share the same cookie. However, plugin and WLAS are in different
              processes. In order for plugin and WLAS to locate the same cookie, same
              cookie name in the configuration is required.
              Cheers - Wei
              Ketan Bhukhanwala <[email protected]> wrote in message
              news:[email protected]...
              > Hello All,
              >
              > According to the Weblogic 451 docs, In the IISProxy.ini file, you should
              > set the "CookieName= "
              > property to whatever value you have specified for the
              > "weblogic.httpd.session.cookie.name="
              > property in your weblogic.properties file. (If it is anything other than
              the
              > default name which is "WeblogicSession").
              >
              > We have an IIS proxy fronting 2 Weblogic App Servers which run in a
              > clustered mode. Also the
              > cookie name is specified in the properties file to something different
              than
              > the default WeblogicSession
              > (lets say it is "mySession").
              >
              > When we do this we see the strange behavior of the application routing us
              > back to our Login page in the middle
              > of a session. We assume this is happening because when our request is
              > switched to a different App Server it
              > cannot be associated with any session. And so we are asked to login and
              > create a new session.
              >
              > This started happening only when we switched to using IIS Proxy and have
              the
              > CookieName
              > set to "mySession". This problem goes away if we change the cookieName to
              be
              > the default and remove
              > the entry from the IISProxy.ini file.
              >
              > Our App Servers are running Weblogic 4.5.1 with sp8.
              >
              > Any ideas ??
              >
              > Thanks
              > Ketan.
              >
              >
              

  • I have created a form in InDesign, exported to a pdf, created an editable form and saved.  When I open the form and make changes and save, the reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is alway

    I have created a form in InDesign, exported to a pdf, then created an editable form and saved.  When I open the form and make changes and save, then reopen the changes are there.  If try to email this form as an attachment after editing, the attachment is always minus the edits.   ????

    Hi chuck,
    If you ave created the form and then filling it yourself and saving the form, the filled data should be there when you reopen the same form.
    Can you please send the form to me at [email protected]  so that I can have a look.
    Regards,
    Rave

  • How to edit the setup.ini file of the Adobe Reader X MUI?

    Hi everyone.
    I discovered today that is is possible to edit the setup.ini file of the Adobe Reader X MUI  10.1  installer (multilingual)  in order to customize the installation. I stil have some questions about this.
    1. I would like to make a custom installation of Reader X in german, english, french and spanish. Is this possible? I want to leave out all other languages from my installation..,.
    2.  I would like to edit the ini file to make an automatic update of my Reader, by installing all the patches (10.10, 10.11, 10.12, 10.13, 10.14, 10.15 and 10.16). Is this possible?
    I patched my Reader manually, but when I install only the 10.15 and 10.16 updates, some functions are still missing (signature toolbar and add text function) so I suspect the patches are not-cumulative.
    Can anyone on the forums show me the right codes for doing this? How can I get a 4-language upgraded Reader X?
    Sincerely yours.
    K. Adam.

    See the docs: http://www.adobe.com/devnet-docs/acrobatetk/index.html.
    The admin guide tells you what updates are cumulative (all 10.x quarterlies) and how to set the lang via the cmd line. However, check out the Wizard Guide and download the free Wizard to customize your install and .ini as needed. Much easier.
    hth,
    Ben

  • After loading the latest sofware with an update, (iphone 4 /5.0) I do not have zoom any longer with my camera, can I correct after loading the latest sofware with an update, (iphone 4 /5.0) I do not have zoom any longer with my camera, can I correct this?

    After loading the latest software with an update, iphone 4/ 5.0, I do not have zoom with the camera any longer, can I correct this or is it a software item?

    Steve:
    Welcome to Apple Communities.  The Zoom feature has changed a little in iOS5.  To activate the zoom, "pinch" the screen with two fingers.  You will see the screen zoom and will also now see the slider that you use to see when tapping the screen.
    Hope this helps.
    David

  • Why even unchecked my crash reports are sent? I have to manually edit the "application.ini" file at every update! This is unacceptable to the user's choice!

    Why even unchecked my crash reports are sent? I have to manually edit the 'application.ini' file at every updates! This is unacceptable for the user's choice!

    Check the SubmitCrashReport (DWORD) key in the registry and set the value to 0.
    *HKEY_LOCAL_MACHINE\Software\Mozilla\Firefox\Crash Reporter\SubmitCrashReport: DWORD
    *HKEY_CURRENT_USER\Software\Mozilla\Firefox\Crash Reporter\SubmitCrashReport: DWORD
    You may need to check the HKLM\Software\Wow6432Node\ node on 64 bit Windows.
    *http://kb.mozillazine.org/Mozilla_Crash_Reporter

  • I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

    I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

    It actually sounds like the warp text window is opening off screen.
    Resetting the photoshop elements 10 preferences should fix it.
    *Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
    *Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
    *Press Yes

  • I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?

    I have 2 point security for AppleID. My iPhone 4S is listed as my trusted phone to text. No tel. no. is given. I am updating to iPhone 6Plus with same tel. no. Do I need to change anything for the sign in verification?

    Of course You can also add your iPhone telephone # as a trusted device.
    This way when you insert your SIM card into any phone, Apple will automatically recognize your cell phone # as a
    trusted device (may be handy if iphone breaks but you insert SIM card into another phone).
    HOWEVER:
    Having also your iPhone as a trusted device, is convenient if you travel and use a different SIM card
    at destination. This way you can still use the iphone for verification, even though you are using a different
    phone #.
    Regards

  • Can a single ACS appliance be integrated with a diff OU in the AD (maybe with a diff IP address range).

    Hello Everyone,
    Can a single ACS appliance be integrated with a diff OU in the AD (maybe with a diff IP address range). If yes, how?
    Thanks,
    Rishi

    Rishi,
    Are you looking to leverage certain group in AD to be assigned to a specific subnet? If yes, then this can be done through dynamic vlan assignment.
    Thanks,
    Tarik Admani

  • Report for editing the word document with xml tags

    Hi all,
    My requirement is to edit the contents of the word document in the presentation server through report programming and save that document  in the presentation server.
    For eg if my word document contains many xml  tags with spaces < EDI_DS40 >, i would like to remove the spaces and i want it to be lyk <EDI_DS40>.Then say if i wanted to make some modification (addition, deletion,replacing with some text) in the text in some nth line of the document how can dis be dione.
    Is there any function module or bapi which serves this purpose.
    Can anyone pls guide me on dis.
    Thanks & Regards,
    Revathi.

    Hi,
    just to let you know I have sorted this.
    http://macintoshhowto.com/leopard/how-to-merge-pdf-files-with-preview-in-leopard .html
    Thanks.

  • "dir.mnu warning" after editing the function palette

    Hello everybody!
    I´ve got a small problem, which is getting on my nerves! I created a new subfolder with vi´s in the function-palette (with the advanced palette tool)... after all i deleted it, because now i use other vi´s. So the problem is everytime i open a vi of my project which has something to do with the "signal processing palette", i got this warning that the "dir.mnu" has changed.
    So far i created a new project, but the problem is still there... How can i restore the default palette settings? Can i delete the false dependencies? Or are there global files i can delete and then labview uses the default palette?
    Thanks,
    Michael
    Attachments:
    warning.JPG ‏28 KB

    I think when i installed Labview, there was a symbol for every VI in the function-palette. Could it be that i somehow have overwitten the defaults in the ...\National Instruments\LabVIEW 2009\menus folder? So thats why the "restore defaults" button is grayed out, because these ARE the default values. Is it possible to get the "dir.mnu" for the signal processing subpalette (...\National Instruments\LabVIEW 2009\menus\Categories\Signal Processing\dir.mnu) of somebody?... Reinstalltation is al little more complicated, because the DVDs are at our computer administrative department.
    So, thanks for your help....
    Michael
    Attachments:
    palette.JPG ‏37 KB

  • Is there any way changing the priviledge after starting the managed server with the other user

    Hi,
    is there any way to change the user privilege after i have started the managed
    server with one user.....say for example ....i have started one of my Managed
    server as "root" ...but after that i wanted to make this instance work under as
    "inet"
    how do i do this OR is it possible ????
    please advise ....
    sangita

    Thanks again Rob.
    Rob Woollen <[email protected]> wrote:
    >
    >
    sangita wrote:
    Thanks Rob for been so quick in responding.
    I have 3 questions for you:
    Running a server under root is a huge security hole.My Question: 1) what are the probable security issues while runninga server under
    root ?
    are these security issues external(from outside world) or internal(internally
    within a company) ?
    Iam basically curious to know external threats.
    The problem is the root user can do anything. So if someone finds a
    security hole in your server, then they have complete control of your
    system.
    The usual reason people want to do this is so they can bind to a port
    <
    1024. ie they want their web server to listen to 80.My Question: 2) What is the harm in using port 80 for webserver andwhy do the
    people wanted to bind to a port < 1024 ?
    People normally use 80 for web servers because that's the well-known
    port.
    Personally I would not recommend that you go that route. I would
    recommend that you start the server as a very unprivileged user andbind
    it to some port (say 7001).
    Most firewalls support redirecting ports. Your firewall can redirect
    80
    on the external net to 7001 on the internal net. That's the solution
    I
    would recommend.My Question: 3) Suppose iam having a cluster of 2 Managed servers runningon port
    7070. And Iam having a Iplanet server working as a Webserver that basicallyproxies
    requests to this cluster. Then what is the best approach that i shouldfollow
    in this context.....to be honest with you ....i still couldnot understandwhat
    does "binding" the webserver port to a managed server in weblogic mean.
    I would have your firewall redirect 80 to whatever port Iplanet is
    listening on and then have iplanet proxy to WLS.
    Do not run your WLS servers as root.
    -- Rob
    Iam sorry for asking these "silly" questions(in your opinion) ...butiam a bit
    confused.
    thanks, sangita
    Rob Woollen <[email protected]> wrote:
    Running a server under root is a huge security hole.
    The usual reason people want to do this is so they can bind to a port
    <
    1024. ie they want their web server to listen to 80.
    There is a set uid option in WLS where you start the server as root
    and
    then after it binds to the low port, it will switch to another userthat
    you specify.
    Personally I would not recommend that you go that route. I would
    recommend that you start the server as a very unprivileged user andbind
    it to some port (say 7001).
    Most firewalls support redirecting ports. Your firewall can redirect
    80
    on the external net to 7001 on the internal net. That's the solution
    I
    would recommend.
    -- Rob
    sangita wrote:
    <Sure, it's possible to do this, >
    how to do this?
    <but why do you want to do it? >
    Iam not sure why this group (the other group than me) does start theirserver
    as "root"...but somebody from that group asked me about this today.
    I would not recommend that you start WLS as root on your production
    system ever under any cirucmstance.then what is the best approach and what are the pros and cons if westart the
    server as "root" OR as different user ????
    please advise ....
    thanks again.
    Rob Woollen <[email protected]> wrote:
    Sure, it's possible to do this, but why do you want to do it?
    I would not recommend that you start WLS as root on your production
    system ever under any cirucmstance.
    -- Rob
    sangita wrote:
    Hi,
    is there any way to change the user privilege after i have startedthe managed
    server with one user.....say for example ....i have started one
    of
    my Managed
    server as "root" ...but after that i wanted to make this instance
    work
    under as
    "inet"
    how do i do this OR is it possible ????
    please advise ....
    sangita

  • HT201210 I have done all of the things on this list, to include editing the hosts file with no the same error each time (3194).  I am trying to restore my iphone 4 ios 6 to get it unlocked.  Diagnostics show no issue communicating with apple. Help.

    I am trying to restore my iphone 4 ios 6 to acheive unlock.  hit restore and it unloads software, confirms with apple then displays the 3194 error.  I have turned off my virus scanner, unplugged all usb except for iphone, edited the hosts file and run diagnostics which showes communication with apple is fine.  What do I need to do to get my ipone to restore?

    There is nothing wrong with the OS update.
    Delete ALL your email accounts.
    Restart Playbook
    Put the accounts back and ensure they are all set with PUSH ON.  Manual (push off) will burn battery.
    Similarly delete your wifi connections and add back when required. 
    Turn off wifi is not connected to wifi. 
    Any "hunting for connection" in email or wifi will burn up battery.

Maybe you are looking for