After Effect CC and Flash Pro CC did not successfully update 19th June '14

After Effects CC and Flash Professional CC did not successfully update, even after several attempts. All other Apps are currently up to date with today's update release. 19th June '14

Hi Rob,
Did you get any error message when you tried to update After Effects CC? Can you share more details?
Thanks,
Jyothi

Similar Messages

After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
See this document for details:
"64-bit Windows required for After Effects and Premiere Pro CS6"
In general, you can only download and use applications for which your computer system meets the minimum system requirements.
Premiere Pro system requirements
After Effects system requirements

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Error Code: 34 Mac OSX 10.8.4 for Photoshop CC, Bridge CC, After Effects CC, and Flash CC

Hello,
So I am installing all the CC versions of the software and all but Photoshop, Bridge, After Effects, and Flash installed without a hitch. On those 4 programs I get the same error code: 34. I am able to install the CS6 variants of them without any problem and run it. Here is the error code:
Exit Code: 34
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 1 fatal error(s), 0 error(s)
FATAL: Payload 'Camera Profiles Installer_8.1_AdobeCameraRawProfile8.0All 7.0.0.108 {D5BBDFC0-C716-46B1-8908-85B0EA49FFA1}' information not found in Media_db.
I have been unable to fix this on my own and with what I've found online. I'll list what I have done so far to try to fix this issue. I have tried to use the Adobe Creative Cloud Cleaner Tool but the issue is since PS, BR, AE, and FL won't install I can't clean them to try a fresh install. I tried installing the CS6 versions to see if it would dowload the 'Camera Profiles Installer_8.1".
Any help on fixing this ASAP would be much appreciated!
Thanks,
NB

Hey Guys I am experiencing the exact same iusse I spoke with adobe and they weren't able to solve the issue here's log.
I'm pasting the fatal errors from photoshop hope this helpful
06/18/13 12:02:45:614 | [FATAL] | | OOBE | DE | | | | 19669 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:02:46:615 | [INFO] | | OOBE | DE | | | | 19669 | - 1 fatal error(s), 0 error(s)
06/18/13 12:02:46:615 | [INFO] | | OOBE | DE | | | | 19669 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:13:17:103 | [FATAL] | | OOBE | DE | | | | 26756 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:13:18:104 | [INFO] | | OOBE | DE | | | | 26756 | - 1 fatal error(s), 0 error(s)
06/18/13 12:13:18:104 | [INFO] | | OOBE | DE | | | | 26756 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:20:13:772 | [FATAL] | | OOBE | DE | | | | 31392 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 12:20:14:774 | [INFO] | | OOBE | DE | | | | 31392 | - 1 fatal error(s), 0 error(s)
06/18/13 12:20:14:774 | [INFO] | | OOBE | DE | | | | 31392 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:07:14:983 | [FATAL] | | OOBE | DE | | | | 16841 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:07:15:984 | [INFO] | | OOBE | DE | | | | 16841 | - 1 fatal error(s), 0 error(s)
06/18/13 13:07:15:984 | [INFO] | | OOBE | DE | | | | 16841 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:19:33:315 | [FATAL] | | OOBE | DE | | | | 24315 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:19:34:316 | [INFO] | | OOBE | DE | | | | 24315 | - 1 fatal error(s), 0 error(s)
06/18/13 13:19:34:316 | [INFO] | | OOBE | DE | | | | 24315 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:21:06:794 | [FATAL] | | OOBE | DE | | | | 25240 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:21:07:796 | [INFO] | | OOBE | DE | | | | 25240 | - 1 fatal error(s), 0 error(s)
06/18/13 13:21:07:796 | [INFO] | | OOBE | DE | | | | 25240 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:21:30:440 | [FATAL] | | OOBE | DE | | | | 25537 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:21:31:441 | [INFO] | | OOBE | DE | | | | 25537 | - 1 fatal error(s), 0 error(s)
06/18/13 13:21:31:441 | [INFO] | | OOBE | DE | | | | 25537 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:47:18:185 | [FATAL] | | OOBE | DE | | | | 9822 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:47:19:186 | [INFO] | | OOBE | DE | | | | 9822 | - 1 fatal error(s), 0 error(s)
06/18/13 13:47:19:186 | [INFO] | | OOBE | DE | | | | 9822 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:47:58:563 | [FATAL] | | OOBE | DE | | | | 10207 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:47:59:565 | [INFO] | | OOBE | DE | | | | 10207 | - 1 fatal error(s), 0 error(s)
06/18/13 13:47:59:565 | [INFO] | | OOBE | DE | | | | 10207 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:48:24:091 | [FATAL] | | OOBE | DE | | | | 10483 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:48:25:092 | [INFO] | | OOBE | DE | | | | 10483 | - 1 fatal error(s), 0 error(s)
06/18/13 13:48:25:092 | [INFO] | | OOBE | DE | | | | 10483 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:54:20:032 | [FATAL] | | OOBE | DE | | | | 14779 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 13:54:21:034 | [INFO] | | OOBE | DE | | | | 14779 | - 1 fatal error(s), 0 error(s)
06/18/13 13:54:21:034 | [INFO] | | OOBE | DE | | | | 14779 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:15:39:774 | [FATAL] | | OOBE | DE | | | | 28845 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:15:40:775 | [INFO] | | OOBE | DE | | | | 28845 | - 1 fatal error(s), 0 error(s)
06/18/13 14:15:40:775 | [INFO] | | OOBE | DE | | | | 28845 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:27:33:665 | [FATAL] | | OOBE | DE | | | | 37134 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:27:34:666 | [INFO] | | OOBE | DE | | | | 37134 | - 1 fatal error(s), 0 error(s)
06/18/13 14:27:34:666 | [INFO] | | OOBE | DE | | | | 37134 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:49:31:860 | [FATAL] | | OOBE | DE | | | | 48667 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 14:49:32:862 | [INFO] | | OOBE | DE | | | | 48667 | - 1 fatal error(s), 0 error(s)
06/18/13 14:49:32:862 | [INFO] | | OOBE | DE | | | | 48667 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 16:05:56:669 | [INFO] | | OOBE | DE | | | | 16619 | - 0 fatal error(s), 2 error(s)
06/18/13 16:09:05:111 | [INFO] | | OOBE | DE | | | | 19310 | - 0 fatal error(s), 2 error(s)
06/18/13 16:29:47:953 | [FATAL] | | OOBE | DE | | | | 11765 | Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
06/18/13 16:29:48:954 | [INFO] | | OOBE | DE | | | | 11765 | - 1 fatal error(s), 0 error(s)
06/18/13 16:29:48:955 | [INFO] | | OOBE | DE | | | | 11765 | FATAL: Payload 'Camera Profiles Installer 7.0.0.108 {539AEF15-3A2B-4A31-A587-7E90F7D9C700}' information not found in Media_db.
Error Code: 34 Mac OSX 10.8.4 for Photoshop CC, Bridge CC, After Effects CC, and Flash CC

Fix for crash in After Effects CS5 and Premiere Pro CS5 when Joesoft Hear audio enhancer installed

After Effects CS5 and Premiere Pro CS5 both can crash due to a conflict with the Joesoft Hear audio enhancer.
We've just gotten confirmation from Joesoft that they've released a beta version of Hear that doesn't conflict with After Effects CS5 and Premiere Pro CS5. We're recommending that our customers who also use Hear install the 1.0.5b2 (build 490) beta version of Hear.
Let us know on this forum thread whether this solution works for you. We on the After Effects and Premiere Pro teams will monitor this thread for feedback, and we'll make sure that the folks at Joesoft get the information that they need, too.
When reporting back, be sure to let us know whether you've installed the Premiere Pro CS5 (5.0.2) update and After Effects CS5 (10.0.1) update.

After 2 days trying to get AE and Premiere past the mediacore initialization message, I finally stumbled on this little message. Updating Hear definitely solves the problem!

After Effects CS6 and Premiere Pro CS6 Long Startup and Application Hang

Problem:
After Effects and Premiere Pro CS5.5 and CS6 are very slow to start all of a sudden. Around 5 minutes to get to/by the intro dialogue box. For AE, the majority of the time is spent on the "initializing user interface." Then, if I can make a comp, and even a layer inside that comp, it will "Hang" if I attempt to open AE's General preferences for example (no preferences window ever comes up). This "hang" is what the Event Viewer in windows calls it, with the faulting module being afterfx.exe. Premiere is not much different. It makes it to the new project window fast, but after setting project parameters and creating the first sequence, I can't get into the preferences either and the application hangs. It is important to note that if I have another application open, like Chrome or Firefox for example at the time the application hangs, they will freeze as well. As soon as I kill the Afterfx.exe process, they come back to life.
I have read nearly all threads on the subject, and am struggling to find a solution:
Deleted preferences folder under my username's appdata.
Turned off Firewall (network traffic from dynamiclink, qtserver, etc was allowed, but what the hay)
ran windows system file checker/malwarebytes/rkill/rootkit detection.
checked for windows compatibility checkboxes under the file.
Uninstalled Wacom Tablet drivers
Disabled Aero
Started with ctrl-alt-shift to delete pref.
uninstalled video driver and replaced with one 6 months ago.
uninstalled, reinstalled, and tested various quicktime versions back to version 7.69
moved plugins folder
moved opengl's plugin out of the folder temporarily
Disabled all 3rd party codecs (xvid was the only one installed and for months)
reinitialized default directshow filters
checked for adobe font list (none found) and removed any fonts from 1 month ago to present.
used msconfig to selective startup without other applications/services running.
Uninstalled all adobe products, and reinstalled.
I performed all of these in a systematic manner, trying to solve the problem. None have fixed the problem.
So it doesn't seem to be a network issue, a codec issue, a plugin issue, a driver issue, font issue, or conflicting application. Any thoughts?
System Info:
PC Windows 7 pro 64-bit SP1
Core i7 - 960 24GB ram
AMD Radeon 6750 v12.10
Adobe CS6 Master Collection

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Should I render a looping movie in After Effects or in Flash Pro?

Hello. I am using Flash Pro CS6.
Right now I am trying to make a simple SWF file that can play three looping clips via individual play buttons.
I made three FLV movies in After Effects. They are 80 frames , 30 fps clips, but those clips have lots of same frames. I mean one clip is something like this.
AAAA BBBB CCCC DDDD AAAA
AAAA DDDD CCCC BBBB AAAA
AAAA BBBB CCCC DDDD AAAA
AAAA EEEE FFFF BBBB AAAA
It contains just 6 frames(A,B,C,D,E,and F). As you can see there are lots of same frames.
I want to make SWF as small as possible, so to make it small, I should import still images and make a new timeline in Flash pro and render them as SWF in it?if I import still bitmap images(ABCDEF images) into Flash Pro and make a SWF in it, Flash Pro can do better compression than AE? If so I will remake the timeline. I really need better compression because I need to submit a SWF file whose limit is 5MB.
If I need to make my SWF small,Which is the best choice? Making a FLV in AE and import it into Flash Pro and publish, OR Making a movie using those still images in Flash Pro and publish? Give me your advice. Thank you in advance.

Thank you for your advice.
Is it better to make a movie in Adobe Flash? Can you explain the merit? I always use AE and it's much easier for me to make a movie in AE, if there is not big difference I want to stick with AE timeline. Tween function is kinda hard to handle.
And thank you for the FLV info.I will upload them and use them as an external clip.

After Effects CC and Premiere Pro CC don't play well together on new Mac Pros

Would love some insight from folks on this. We have welcomed 2 new mac pros w dual D700's into our edit suites and have found an issue we need some help finding a work around for.
With Creative Cloud we're used to rendering a large amount of graphics in After Effects, and while that's underway, our editors will often go on and work in Premiere on the edit. Unfortunately, with the new Mac Pros After Effects render process seems to freeze up the moment we open Premiere and start to work. Any fixes for this? Special Memory allocation? Patch? I've heard the lack of Cuda might be the issue, but can't imagine Adobe would not support something that keeps their product running smoothly.
Please let us know and we are grateful and thank you in advance...
[email protected]

This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forums
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/premiere
or
http://forums.adobe.com/community/aftereffects_general_discussion

After effects CS6 and premiere pro and adobe encoder crash when previewing profess 422 files, after upgrading to Mavericks

I have tried all of the fixes and updates that adobe have to offer. They say that this is because of the change in QuickTIme that are causing the problem. Still looking for a fix. Please any help would be greatfully appreciated.

I experienced this at one point. Searching the WEB I saw suggestions that there was a problem with a recent version of Quicktime. (I have no idea why the quicktime player would have an impact.) However, reverting to an earlier version of Quicktime fixed the problem. Search this board using quicktime as a search phase. The quicktime web site allows you to download the earlier versions. I'm not at my editing machine, but I believe that I am at version 7.5.2.

After change port for TCPIP PORT for default SQL Server instance (MSSQLSERVER), sql service and sql agent service did not started again

Hi
-when i install default instance MSSQLSERVER i added a domain account as a service account,
- when i change port for TCPIP PORT , and after sql service and sql agent service did not started again.
it thrown error
The SQL Server (MSSQLSERVER) service failed to start due to the following error:
The service did not start due to a logon failure.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
but when i add domain\sqservice account in administrators group these services started,
1) here why this change behavior happened
2i changed the port 1500
adil

HI
the sql instance service is running with domain/sqlservice account ,
- i stopped the sql service service
- when i start it not started again and i found below error message
Domain and account: MOJPORTAL\spsqlservice
This service account does not have the required user right "Log on as a service."
User Action
Assign "Log on as a service" to the service account on this computer. You can use Local Security Settings (Secpol.msc) to do this.
If this computer is a node in a cluster, check that this user right is assigned to the Cluster service account on all nodes in the cluster.
If you have already assigned this user right to the service account, and the user right appears to be removed,
check with your domain administrator to find out if a Group Policy object associated with this node might be removing the right.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Service Control Manager" Guid="{555908d1-a6d7-4695-8e1e-26931d2012f4}" EventSourceName="Service Control Manager" />
<EventID Qualifiers="49152">7041</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8080000000000000</Keywords>
<TimeCreated SystemTime="2015-04-24T17:12:58.326973300Z" />
<EventRecordID>2177</EventRecordID>
<Correlation />
<Execution ProcessID="520" ThreadID="4044" />
<Channel>System</Channel>
<Computer>PORTALSQL1.mojportal.com</Computer>
<Security />
</System>
<EventData>
<Data Name="param1">MSSQL$xSQL</Data>
<Data Name="param2">xxxL\spsqlservice</Data>
</EventData>
</Event>
adil

How to Create and export motion data from After effects CC to Flash CC

Hi there ,
Basically what I've got here is as follows.
I have a small character animation (about 100x100 px) - that is running inside a screen of 1280x720 px.
I want to hold the caracter in one position (so that I can get ridd off the useless alpha. i guess i will do that manually by keyframing)
and also to give a motion data to be used in Flash CC - to assemble the original animation.
Can anybody help me out with this?

Yeah, that's one of the reasons that we removed it: no one was using it. And it was terrible.
Here's more information:
http://forums.adobe.com/message/5555577
Of course, if you _do_ want this feature, it's relatively easy to save the project back to After Effects CS6 and then use After Effects CS6 to create an XFL file. Keep in mind that all Creative Cloud subscribers have access to CS6 versions, too.

Hi, so I'm wanting to buy After Effects CS6 and I have a MacBook Pro 15 inch, will the program work? If not what which After Effects version will?

I'm saving up to buy After Effects CS6 and I wanted to make sure the program will work on my Macbook Pro. I have the 15 inch screen. If that version doesn't work is there another version that will work with it?

Yes, After Effects CS6 will work on a MacBook Pro.
I see in your sig that it says that you're still using Mac OS X v10.5.1. Really? Because that would be a problem. After Effects CS6 requires v10.6.8 or higher of Mac OS X.

After Effects export as Premiere Pro project weird PAL/NTSC problem

This post is not a question. It's here, because I've found a solution and want to share with You.
I've noticed a strange problem during export from AE to PR.
Ok, here I go.
AE = After Effects CS3
PR = Premiere Pro CS3
My AE project is D1/DV PAL Widescreen. It is a sequence of slideshow with some video effects applied. I needed that sequence in PR. I was happy to find a new feature - export as premiere pro project (new for me - i am pretty rookie ;). Thaks to this feature I have saved most of my disk space that is always to low. But, like every first try, this one was not perfect too. I had two problems.
Problem no 1.
I opened exported project in PR and saw message like "video effect AE.CC COMPOSITE not present".
Whole composition was working perfectly except that one video effect that was fundamental for this project.
*Solution was as easy as it can be. I've just copied that effect from AE plugin folder to PR plugin folder. It worked for this.
Problem no 2
Like says AE Help "When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences."
Project settings in PR was exactly D1/DV PAL Widescreen. So where is the problem You ask?
Therefore why my Timeline works in NTSC 29,97 frame rate if all settings match PAL 25 frame rate?! I don't know.
*Solution to fix this annoying bug is to create a new project in PR with all settings for D1/DV PAL Widescreen in this case. Than just import that PR project exported from AE. Now timeline works like it should in PAL frame rate.
That's it.
I hope this post is helpful, because I didn't find any answer for this here in Adobe forum.
Adam

Who's says that Microsoft can't debug?
I used msconfig, first disabling startup items, -same result.
Enabled all startup items, disabled all non-microsoft services - AE worked!
I re-enabled each service in turn until AE crashed.
The fault was related to an item for a video streaming device I have in my house. It was Monsoon-multimedia's Vulkano Service. Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen. It does load a couple of virtual devices in device manager, and uses a proprietary codec.
I uninstalled the vulkano streamer application and rebooted the external Vulkano device. I reinstalled the Vulkano and verified it connected to the device and could stream. Once it did, I tried AE again and IT WORKED!
I wonder if simply rebooting the Vulkano would have fixed it. Its like opening the garage door to turn on the refridgerator.
Thanks for the help!
Jim

Questions about Adobe After Effects CS5 and CS5.5

I have the Adobe Design Creative Suite CS5 (Photoshop CS5, Illustrator CS5, Flash CS5, Dreamweaver CS5, InDesign CS5, and Fireworks CS5) and was going to order an old copy of After Effects CS5 for my iMac. However when I was about to order on an online store, I notice that there is a CS5 and a CS5.5 version for After Effects. I would like to know which version is better and if I get Adobe After Effects CS5.5 version will I be able to intergrate with CS5 versions of Photoshop, Illustrator, and Flash?
Alos is there a way for to order a copy of Adobe After Effects CS5(or CS5.5 version) on the Adobe online store? I don't want to order the CS6 version of After Effects because I'm afraid I will not be able to intergrate it with my CS5 versions of Photoshop, Illustrator, and Flash.

You should get After Effects CS6. There is no reason to be concerned about using After Effects Effects CS6 with Flash, Illustrator, and Photoshop CS5.
Here's what's new and changed from After Effects CS5 to After Effects CS5.5: http://adobe.ly/hX01mB
Here's what's new and changed from After Effects CS5.5 to After Effects CS6: http://adobe.ly/HCGNMJ

IPAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore

PAD Mini Locked after iOS upgrade, tried reset on iPAD did not work, plugged in and device not appearing in iTUNEs for reset/restore. Just get an Apple Logo then a flashing blue screen as if it is caught booting up. This has happened twice before and iTunes restore fixed it. But this time device not appearing in iTunes.
Running iTunes for PC. But as stated restore has worked before! Any help greatly appreciated!!

Place the device in DFU mode and let iTunes restore the device to factory condition.

Has anyone solved or worked around the After Effects CC red flash frame glitch?

I can't find any mention on any forums of the After Effects CC red flash frame glitch later than Feb. 2014. I just installed 12.2 (which was my first CC version) on my macpro and started getting the red flash frames randomly, but with increasing frequency, in my projects. I have never had this problem before on any previous computer or version for AE. The forums I've read have referenced ProRes source footage, outputs to ProRes, and lens blur. My project uses all of these things.
If there is a universally accepted solution/work around, I haven't seen it definitively. Do I not use ProRes source footage? Do I not render to ProRes 4444? Do I not use the lens blur effect? Do I give up and go back to CS6?

Hi Keith,
I have the "same" issue with the red frames in AFX CC
I have seen them first, as I resized a prores4444 HD to a smaller format and saw the redframes in the preview window.
Setup in AFX: I created a comp from the HD Prores4444 footage and put this comp in a comp with resolution of 960x540.
The output format was again prores4444.
I shuttled through the clips in the small comp and I saw the red frames too.
When I switched to the HD comp at the same position everything was fine.
I "solved" the problem by flushing the cache, twice. Because after the first purge I was only able to render the first clip. The second one had the red frame problematic again.
Maybe It has something to do with hardware accelerated layers.
I'm using a MacPro running OSX 10.8.5 with a Nvidia GTX680.
Cheers
Michael

After Effect CC and Flash Pro CC did not successfully update 19th June '14

Similar Messages

Maybe you are looking for