After Effect cs4 export and render issue

When I tried to render or export a video, After Effect(CS4)
become no respond and close,after that, my computer shut down too!
My computer:
Althon 64X 4600+
2GB DDR2 Ram
ATI HD5870 (500mb video Ram)
Windows 7 32 bit
Can anybody can slove this problem for me?

Mylenium asked very pertinent questions.  I'll make some educated guesses, which may or may not apply.
First thing: 2 GB may seem like a ton of memory to you, but in AE-Land, it's NOTHING.  You need to trick that machine of yours out with memory.  On a 32-bit system, that would mean bringing it up to 4 GB.
If you're trying to use multiprocessing, turn it off and leave it off.  On a 32-bit system, you'll never have enough memory to make multiprocessing work efficiently.
Trying to speed rendering by using Open GL acceleration?  Turn that off, too.
Since you're on a 32-bit system, the most recent version of AE you can run is Version 9.  Make sure it's fully updated. 
But if you shot video on a DSLR, HDV Camera, XDCam or Flip Cam, you could still have problems.  Since you can't be running AE 10, which pretty much solved the problem of long-gop footage, here's why:
Dave's Stock Answer #1:
If the footage you imported into AE is any  kind of the following -- footage in an HDV acquisition codec, MPEG1, MPEG2, AVCHD, mp4, mts, m2t, H.261 or H.264 -- you need to convert it to a different codec.
These kinds of footage use temporal, or interframe compression. They have keyframes at regular intervals, containing complete frame information.  However, the frames in between do NOT have complete information.  Interframe codecs toss out duplicated information.
In order to maintain peak rendering efficiency, AE needs complete information for each and every frame. But because these kinds of footage contain only partial information, AE freaks out, resulting in a wide variety of problems.
I'm a Mac guy, so I like to convert to Quicktime movies in the Animation or PNG codecs; both are lossless.  I'll use Apple's Compressor, Adobe Media Encoder or Quicktime Pro to do it.

Similar Messages

  • After Effects CS4 error during render

    The error appearing is as follows...
    After Effects: AEGP Plugin Media IO Plugin:
    Unknown Error!
    MediaIO2 error: 0x4
    Not enough memory to complete this encoding
    ( 5027 :: 12 )
    Now, my computer memory is very poor (1.98 GB RAM), however, I do not believe this is the issue as I have tried rendering the exact same file on my other computer with 8.00 GB RAM, but the same error occurs.
    I am completely baffled with why this error may be occuring, I have tried many ways to try and stop this. Such as...
    Changed the "RAM to leave for other Applications" to 0.25 GB
    Enabled Multiprocessing
    Enabled Disk Cashe and to a size of 10,000 GB
    Installed the latest update of After Effects CS4
    Tried changing After Effects CS4's priority and affinity using Task Manager
    Tried rendering with only After Effects opened with all other applications closed
    Rendering with different output modules rather ".wmv", such as ".avi" etc.
    Changed the video size from 856x480 to 428x240 etc.
    I have tried rendering different sections of the video to avoid the parts where it has previously failed to render, however, it is continuing to crash and fail regardless of the section
    The project I am rendering is rather large (4 Minute File), consisting of atleast 1 GB worth of imported video (.wmv) and images (.png) etc. However, before today, rendering was never problem and my renders would always run smoothly without crashing, so i'm completely unsure on what the possible change is and what could resolve the issue.
    Thank you, all help is appreciated!

    Any Windows Updates recently? Installed some CoDec pack or alternate media player software? If so, get rid of CoDec packs and reinstall Windows Media Player using the standalone package downloadable from Microsoft...
    Mylenium

  • After Effects CS4 Exporting Question

    I am creating several After Effects CS4 compositions that will be used in a Premier Pro CS4 project. Right now I am importing the AE compositions into Premiere with out exporting them first. It is real convenient to be able to click into PP and see the current changes take effect. My question is this, once I am done tweaking a composition should I be exporting it in another format or I is it ok to use the AE file as is? Am I suffering any quality loss by not going to quicktime or one of the other choices?
    And in PP you hit enter to render. Is the AE equivalant hitting the space bar and playing the timeline? I see the green line above any changes but I didn't know if there is another step to maximize the quality of the finished product.
    Thanks in advance for any help.
    Cole

    R-Cole wrote:
    Am I suffering any quality loss by not going to quicktime or one of the other choices?
    If you suffered any quality loss, you'd know your settings are wrong. Most commonly people make a mess of field order, which of course you can neatly avoid by using DynamicLink such as you already do. The rest is more or less a matter of personal preference and how much performance is consumed by live rendering the AE compositions vs. how much juice your machine has. You wouldn't use that workflow on very complex projects where rendering a single frame can take up to several minutes, but for straight titles and color corrections it's okay.
    R-Cole wrote:
    Is the AE equivalant hitting the space bar and playing the timeline?
    The green line refers to frames stored in RAM, the blue ones to the disk cache, should you use it. Read the help files on how to generate RAM previews to populate both caches. After you have RAM-previewed each segement of the timeline and use the disk cache, it may be possible to get realtime spacebar playback, but there is no guarantee for that. After all, AE is primarily foicused on compositing, not RT editing. There's one caveat, however. The disk cache will only be used, if AE thinks it could not render the frames quick enough, so in your simple scenario it may never be used. And of course specific chnages will invalidate caches, so you's have to re-render. It really depends.
    Mylenium

  • After Effects CS4 problem (and Premiere Pro CS4)

    For the past two days I've had trouble starting my Adobe software. (AE and PP)
    I've suddenly gotten this:
    I've had this software for a year or two with no issues whatsoever. I have not put in my serial for fear it's a virus.
    Things I've done to try to fix this:
    Restart the computer (many times)
    Run AVG scanning over the entire computer (done multiple times)
    Run CCleaner to check for any issues and cleaning (done multiple times)
    Restored the computer back a few weeks ago when I knew the software was working. First few times I did this, it would just restart, and say it couldn't restore because a process was stopping it from running. Ended up restoring it in safe-mode sucessfully.
    Check for any weird processes on my computer. Nothing strange.
    Any ideas where to go from here?
    Thanks in advance, - WilsonCW

    You should receive the dialog if you are running in trial mode each time you launch the application.  Also looking at this thread it appears you used a registry cleaner and then a restore point but I don't see that you have tried reinstalling the software?  Have you tried removing and reinstalling the software?
    Also as a tip before using any type of registry cleaner I would recommend always going into Regedit and backing up your registry.  This way if the registry cleaner does do damage you can restore the damage which was done.

  • After Effects CS4 - Rendering and Locating Missing Files/Reconnecting Media

    I am needing to do the following and unfamiliar as I am new to CS 4:
    1. Rendering
    2. Locating a missing file/reconnecting media
    Thanks,
    "scubakgd"

    Basics of Rendering and Exporting
    Importing and Organizing Footage Items
    Mylenium

  • Severe audio problems in After Effects CS4 and MXF and more...

    Hi!
    I've been experiencing a lot of problems lately with several CS4 products.
    First, and the worst, is that there seems to be some severe audio bug in After Effects when handling mxf-files. I pre-cut a project in premiere CS4, shot with a Sony EX1, and then imported the project in After Effects CS4.
    In premiere everything worked fine and I had all the audio. In AE however the audio matched with the MXF-files disappeared (Yes I had the import audio box checked). All other audio worked fine from the music tracks and so on, but the MXF-files (MXF for NLE) was completely blank, the waveforms were completely flat. I checked every option there is in AE regarding audio and tried enabling and disabling XMP ID's and so on. After a lot of tweaking and testing I understood that the problem was not with any settings anywhere, the MXF-files lacked audio even if I started a new project and just imported the MXF-file.
    The problem seems to be connected to when importing from Premiere. My colleague was editing a similar project on his computer in After Effects without problems, and he started out fresh in AE (didn't pre-cut in premiere). However, we tried to move my project to his computer, to see if the problem was connected with incompability with my hardware or such, and he got the same problem as me when he opened the project. Waveforms on MXF-files were completely flat. Certain confirmation that the problem was not connected with my computer appeared when he later reopened his own project, that had worked fine before, and audio was now completely gone - waveforms flat. An hour later, by chance, his audio suddenly popped back.
    I have experienced this problems in two different projects in different forms (but both pre-cut in premiere). In the first, audio disappeared while previewing but was there when I ctrl-scrolled and rendered (no I hadn't muted audio in the preview panel). In the second, audio was completely gone even when rendered.
    In both cases I tried saving and restarting the computer, reimporting from premiere, starting a fresh after effects project and only importing the mxf-files, changing the project settings, fps fixed to the correct instead of auto, changing output audio mapping, changing XMP, and so on in every possible way and combination I could imagine.
    At my company our suspicion is that After Effects flags mfx-files imported from Premiere in some wierd way, to strengthen and ensure compatibility between the two - regarding different audio tracks, settings and effects from premiere (and this is almost what you could suspect that the XMP ID is for, but as explained with or without doesn't change a thing regarding this). We have no problem with the pure MXF support for AE, as MXF-files work just fine in After Effects if you import them directly and have not imported them through premiere earlier (but after a file has been "flagged" you seem to be sc***ed)
    Anyone else experiencing this? Or am I missing something huge?
    As additional notes, the dynamic link function seems extremely buggy and both premiere both sometimes complains about "dynamic link already in use and only one connection blah blah" even though only one link is used, and even though you restart the projects, programs, computer, whatever.
    In furher addition Adobe Media Encoder (which also seems to be using some sort of dynamic link offspring) is super-buggy and most codec formats either doesn't start to render or just renders partially and then the program hangs. The problem have a connection with a process named pproheadless.exe eating upp all the RAM (4gbs).
    (My workstation has been working smoothly for one and a half years and I have had very little problems with CS3 and "just" AE CS4. I am cautious of updates, don't have spyware and use Quicktime 7.5 as 7.5.5 is superbuggy and people seems to have problems with 7.6 and it doesn't fix the gamma issues anyway.)
    Sorry if this was a long post but the problem is compl

    Dude, that's what these forums are all about. Everyone in here says they dont work for Adobe, but they all act like apologists for what is clearly a disaster of a software release.  My complaints aren't as specialized as yours, just very basic, and I wont go into all of them, because the list is long, and includes nearly every program in CS4.
    I'm going for a refund, either from the retailer or my credit card company. Releasing software like this is dishonest.

  • Quicktime X and After Effects CS4 - Unwanted Color / Gamma shift

    Hello,
    Upon the import of ANY video footage file into After Effects CS4, there is an immediate color (I am guessing a gamma shift) difference between how the video appears in Quicktime (both X and the older player) and how it appear in the After Effects composition window.
    Footage appears to be darker in AE and lighter in quicktime, both before and after export. The gamma/color then appears roughly the same when being compressed via h.264 and uploaded to the web (the same in Safari, much darker via Firefox).
    My main concern is simply getting AE's color to match Quicktime's so that I can have as close of a match between the color I think I have created in AE, and the actual color that appears in my final output to the web.
    I have tried using all of the fixes to be found relating to gamma shifts via .h264, prores, etc. but nobody seems to have this problem with every codec, even animation. I have tried assigning color profiles in AE, matching quicktime legacy formats, etc. All of the options available in AE to no avail.
    My monitor is calibrated fine, I am using Perian, All of the latest software updates. Any advice much appreciated!

    Hi, thanks for the link. While helpful I am still having problems!
    I tried using the method described with Automator to assign a color profile to a test Animation file, created from scratch in AE and rendered out as an Animation with no color management (previously it made no difference to the quicktime gamma shift as to if I had assigned a working color space or not within AE).
    Automator only gives three color profile options, HD, SD, or PAL. I tried using HD as this is the size of video I normally work in (although I am also working in PAL), and ran Automator. I also tried using PAL and got identical results. It took about 30 seconds to finish and the result indeed looked much better in QT, and opened up in AE looking identical to a copy of the same .mov file with no color correction.
    However, there is *still some change in the image quality as it appears in QT from how it (and the original) appears in AE*.
    Original created / displayed in AE: What I am trying to maintain
    Rendered out, Automator color profile HD assigned, and opened in QT: Gamma looks good but colors slightly more saturated than original in AE.
    Rendered out with no color profile: Original problem with large gamma shift making everything bleached/washed out.
    I have a screen shot I can show you to illustrate this here:
    http://www.yousendit.com/download/THE0ek9xa0RxRTNIRGc9PQ
    While the difference is subtle you can look at the RGB numbers and see the middle example is indeed more saturated.
    Perhaps I need to use another color profile when working with the animation codec for animations created from scratch in AE to avoid this saturation shift, other than HD or PAL? Would you know of how to do this?
    Also, would you know of how to change this, and perhaps a way of changing qucktime's interpretation rules for all animation files per se, so that I do not need to go through every .mov with the animation codec and assign profiles to them?
    Many thanks for your time and sorry for being so long winded!

  • Problem Rendering - After Effects CS4 and CS5

    Hello,
    This problem happens on both my laptops, both of which are more than capable of running and rendering in after effects. When I render the video, it comes out verry choppy and slow. My specs are:
    Dell Studio XPS 1645
    Intel Core i7 820QM Quad Core @ 1.62 GHz
    ATi Mobility Radeon HD 5730
    8GB of DDR3 RAM
    Dell XPS M1730
    Intel Core 2 Duo Overclocked to 3.4GHz
    NVIDIA 8800M GTX in SLi
    8GB of DDR2 RAM
    If the problem is with hardware, I'm going to have to wait for my new desktop in August.

    I have this issue when I try to render a project and continue to do other work on my computer. It seems as you compete for CPU resources you do corrupt the rendered file. On my core i7 with 32gb of ram and 2 gforce gtx 480's hooked in an sli config, I dont have this problem since more resources are available than what my AMD Phenom II 980 with 16GB and no video card has.
    Some of the effects and such are so cpu intensive that to get a good render you need to schedule the render before you leave the office, go to bed, etc. Basically, when you start the render, leave the computer alone and you will get a nice smooth file.
    Also, I like to do my renders in Adobe Media Encoder.. you can import a project into it and allow this app to do the render.. seems to render faster than AE..
    I know this what posted in October and I amreplying 5 months later but I figure this is good info for someone who finds this searching for a solution to the same problem.

  • After Effects CS4 and OMF / AAF

    My project's sound editor who I recently brought on board asked me for an OMF or AAF file from my film (that I'm editing together using After Effects CS4).  I exported the OMF file for a clip that was about 15 seconds and the file was > 1GB!
    My questions:
    1)  Is this typical?  Seems like the sound editor shouldn't need anything this massive.
    2)  I couldn't find any exporting tool for AAF - is there a plugin to do this?  Is this a smaller net resultant file?
    He said there should be plugins for After Effects to export the kind of thing he needs, so I'm pretty sure these are possible.

    Hello, Scireja.
    I think there is a very widespread but understandable confusion regarding the nature of two different kinds of OMF files.
    From your description, it seems like you want to export an OMF exchange file, which is a common way to translate a video timeline into something you can take to a DAW application like Pro Tools for audio post, while keeping the audio edits as separate clips.
    But the OMF export option in After Effects is for OMF essence files. These are video files, in the native wrapper Avid systems use when ingesting or capturing material. It's not a project with embeded clips, but just a video file.
    After Effects can't export this kind of OMF exchage files directly. Premiere Pro does export such files, as this feature is more typical of editing applications. Please note that there could be good news: You have the ability to export an AE project as a Premiere Pro project, and once you have this converted project in PPro, you can then export it as an OMF exchange file.

  • Adobe After Effects CS4 post render errors.

    I am currently working on Adobe After Effects CS4.
    I created a video on Adobe Premiere Pro CS4 mixing 2 sound tracks and a video track + another transparent video track with a logo. I've checked the project many times on Premiere Pro, and it seemed excellent. Then I imported the Premiere Pro Project to After Effects CS4 and checked the sequence again in ae cs4 to confirm it before rendering. After checking the video, I started rendering it.
    All went ok.
    But after rendering the video I got a huge problem. The video works excellent up to 20mins and suddenly the primary video became green colour, but the sounds and the video track where I set the transparent video, still works fine. The primary video was green colour till the end.
    This is a serious problem! Can anyone help me to fix it!! Its Urgent!!

    My system properties are as follows.
    Processor - Intel Dual Core
    Ram - 4GB
    O/S - MS Windows 7 Professional 32bit
    Video render settings,
    Format - H.264
    Frame Rate - 25
    Profile - High
    Level. - 4.0
    Output. - 1280X720

  • Dynamic Link for Premiere and After Effects CS4 with Titles

    I've created a Rolling Title in Premiere Pro CS4.  I'd like to create a Dynamic Link to bring the title into After Effects CS4 to add effects that will show up in Premiere.  I've watched a few video tutorials on Dynamic Link and read the documentation and tried a variety of permutations but can't seem to get this done.
    Also saw something in these forums about problems using Dynamic Link with Titles (as opposed to regular clip??)
    And something about Premiere and After Effects projects being saved together ??in same folder - is that correct?
    So, could someone explain if this can be done and the right way to do it?
    Thanks

    Thanks Mylenium - appreciate the quick and focused reply.
    I would like to keep the benefits of the Premiere Pro Titler (to play with the length of time by stretching or squashing the Title block on the timeline; to type in time to stay on screen at end; ease in and out etc . . .).  If I do render out a png / tiff / or psd sequence with alpha, and bring that into AFX to play with.  Will I still retain the ability to use the Titler features in Premire Pro, or do I essentially have to convert it to 'regular footage' on reimport as opposed to a 'Title?"
    Thanks

  • After Effect cs4 cannot render jpg on network on mac but render locally okay

    After Effect cs4 cannot render jpg on network on mac but render locally okay
    We use intel mac pro as workstation, and our servers are windows 2003 servers.
    After Effect cs4 H264 render  on network without any problem bud jpeg not.
    Thank You
    Ayhan.

    Perhaps you must just enable the Allow Encoding using Legacy CoDecs option in the Quicktime control panel on the network machine or else some of that may not show up. Of course make sure QT is installed correctly in teh first place, as Todd and Rick said. On a server, you may need to set special group policies for that to work, also.
    Mylenium

  • How to install riot gear and evolution in after effects cs4

    Please tell how to install them in adobe after effects cs4.
    Please i am waiting for the solution.

    > Please tell any site from which i can learn editing and some vfx creating from after effects cs4.
    Start here to learn After Effects.

  • Puddle and reflection effects in After Effects CS4

    I am currently using After Effects CS4 (will be upgrading to CS6 in a couple of days) and I am currently trying out a test project using basic lighting animation.  However, one element I want to create is a puddle on the ground.  I was wondering if anybody here could advise on creating a puddle and its effects in After Effects, such as wave movements, reflection (particularly background elements) and whether I should use the basic pen tool or use some sort of diffusion maps.  If I wanted to make things a little more complicated, then how can I create rain effects to hit the ground plane without it looking like a screen filter and have it influence the puddle?
    If any of you would be able to point me out to some other tutorials on the web, I would be very grateful for that.

    GenArts' Monsters GT has a Puddle 3D effect that is quite okay for that. Beyond that I don't see how we should advise specifically without a reference image. There's a million types of puddle from still and murky flat ones to deep asphalt holes to wavy large ones on fields and how "real" they look will ultimately depend on their context.
    Mylenium

  • Video tutorials for After Effects CS4 (and some still relevant from CS3)

    I just added a post to my blog about some new video tutorials that we posted (and some old ones that are still relevant):
    video tutorials for After Effects CS4 (and some still relevant from CS3)

    Thanks Todd!

Maybe you are looking for

  • Problem in reading archiving documents

    Dear All, To see the archived documents, I am clicking on "Data Source" tab in the customer/ vendor/ GL line items execution screen (FBL#N, FBL1N, etc). And thereafter I am selecting Archive tab and pressing enter. But I am getting a message "Report

  • Provide syntax with multiple infotypes?

    Hi, If i take one infotype data we are taking like this... PROVIDE * FROM P0002 BETWEEN PN-BEGDA AND PN-ENDDA. WRITE: P0002-PERNR, P0002-NACHN, P0002-VORNA. ENDPROVIDE. But i want multiple infotypes data like 0000,0006,0008....?Give me the syntax of

  • Not receiving the email to enable reset of my Sync password. Have tried several times across days. No email.

    I had to change my Sync password a couple of weeks ago for security reasons, but now neither password works. Attempts to reset my password via the email method don't work, because while Sync says it has sent one, I never receive it. According to Sync

  • E-recruiting Blueprint

    We are new to E-recruiting.  We would like to see what someone else has done with their E-recruiting project.  Can anyone share their Blueprint for E-recruiting with us?  We are just getting started and are just in the planning stage but are looking

  • Captivate 8, knowledge check radio buttons and check boxes not diplaying correctly in HTML5

    Hello. I am working in Cp 8 on a pc (Win 7, 64-bit) and publishing in HTML5, SCORM 2004, 3rd ed. My issue is with knowledge checks. In preview they look fine, but when published, the radio buttons and check boxes are oversized and do not appear as th