After effect et première pro CS5.5

Bonjour,
j'ai installé la version d'essai d'after effect et première pro CS5.5. Dans After j'ai importé une petite vidéo de 12.15 s, faite avec mon appareil photo . dessus j'ai fait la même chose que dans le tutoriel d'adobe tv intitulé "utilisation de l'outil roto-pinceau. j'ai fais le même parcours, la seule différence est que quand je fais une prévisualisation ça mets du temps à refaire chaque image par image, même après avoir figé le roto pinceau. c'est vrai que sur ma vidéo j'ai beaucoup plus d'intervention que dans le tutoriel, mais bon après avoir enregistré mon projet, je vais dans dans première pro, j'importe mon projet after, et là pas moyen de lire ma vidéo. j'ai la prmière image puis ça passe à celle du milieu puis à celle de fin. j'ai passé des heures dessus et je voudrais que ce ne soit pas en vain. peut être ai je mal choisi le type de composition, mais pour être honnête, je ne sais pas trop ce qu'il faut choisir car il y en a tellement. quelqu'un pourrait il m'aider ? j'aimerai pouvoir faire mon projet avant la fin de l'essai.
merci d'avance

Bonjour Pierre, C'est par hasard mais avec plaisir que je lis ta réponse à Quinou presque deux ans plus tard!!!
Des sous-titres c'est toujours mieux que l'anglais même si ce n'est pas commode de lire, essayer de comprendre et regarder en même temps le déroulé du tuto. En cas de réel besoin, c'est toujours très utile d'avoir un tuto sous-titré à défaut de traduction orale.
C'est l'occasion de remercier tous ceux qui sur ce forum apportent leur aide aux utilisateurs qui a un moment ou l'autre risquent de tomber dans le désespoir absolu que se soit par leur manque de connaissances  ou problèmes divers réels ou supposés des logiciels.

Similar Messages

  • After Effects AND/OR Premiere  Pro CS5 ?

    Hi guys,
    I am quite new, I have only done one videoproject and that was in Premiere Pro CS4. Now I got a new machine and have both Premiere Pro CS5 and After Effects. I have started learning AE from some videos and it is quite impressing what you can do there.  So I hope I can use AE to  improve my videos.
    My question is, shall I do the project in PPCS5 and then connect to AE for making special effects on clips or shall I do the whole project in After Effects ?
    If I choose AE for the project, will I miss some functions from Premiere Pro?
    Many thanks in advance !
    Sven 

    Thank you guys!
    You put me on track, expecially with the link!
    From beginning I am just taking care of  old videos that noone look at because not edited so most of the time just crap.
    I want to edit them, try to improve color and sharpness but also add some funny elements so they are more interesting to watch.
    I have 30 videos from my daughter, each 1 hour and 8 of my own (really crap) and 8 VHS from a friend. That is just to start with.
    Start Adobe Premiere Pro from within After Effects and capture footage for use in After Effects. (See Use Adobe Premiere Pro for capture (Production Premium and Master Collection only).)
    Use Adobe Dynamic Link to work with After Effects compositions in Adobe Premiere Pro without first rendering them. A dynamically linked composition appears as a clip in Adobe Premiere Pro.
    Use Adobe Dynamic Link to work with Adobe Premiere Pro sequences in After Effects without first rendering them. A dynamically linked sequence appears as a footage item in After Effects.
    Start After Effects from within Premiere Pro and create a new composition with settings that match the settings of your Premiere Pro project.
    Select a set of clips in Adobe Premiere Pro and convert them to a composition in After Effects. "
    So with a testvideo I will start using these 5 different methods so I learn when to use which one!
    And I also have 4-5 videolessons to watch.
    Thanks again!
    I probably be back soon with more questions!

  • Is there an easier way to work with adobe after effects and final cut pro x

    I use adobe after effects and I am thinking about deleting motion and compressor ( I can always install again). If you have a good reason to keep those apps let me know because I don't want to be hasty. If I delete them and stick with after effects and final cut pro...  Is there a secret to easy working between FCPX and adobe after effects?
    Thanks

    You'll go from FCP X to and from Motion a lot easier than AE.  Motion does pretty much anything AE does, most of the time faster and easier.  Without Motion, you can't do custom templates.  You can't customize the encoding of files without Compressor.  Why would you want to remove them from your system?  Leave them, use AE if you want along side of them.  But I'd learn Motion first.  Cause AE doesn't read FCPXML, so going back and forth between them is a PITA.
    And until Apple releases the round trip between FCP X and Motion fully, we have this gem:
    http://www.alexnking.com/2012/02/20/fcpx-send-to-motion-app/

  • Avez vous déjà rencontré des problèmes d'installation de police sous première pro CS5.5 pc ?

    Je tente d'installer plusieurs polices d'écritures , sans succès , j'ai tenté différents formats ( ttf, otf ...) mais elles ne semblent pas prise en compte par Première Pro CS5.5 pc .
    Avez vous déjà rencontré ce problème ? Si oui , avez vous une solution ?
    Par avance merci

    http://translate.google.com/
    I try to install more fonts entries without success, I tried different formats (ttf, otf ...) but they do not seem to be taken into account by First Pro CS5.5 pc.
    If you are on Windows, you may find help by searching Microsoft for Windows font help
    http://search.microsoft.com/search.aspx?mkt=en-US&setlang=en-US

  • After Effects CS6 and Premiere Pro CS6 not available for installation for 32-bit systems

    After Effects CS6 and Premiere Pro CS6 require a 64-bit operating system and processor to be installed and run.
    If you subscribe to Creative Cloud but use a 32-bit computer system, you will not be able to download and install Premiere Pro CS6 or After Effects CS6.
    This issue primarily affects users on the Windows operating system, since all supported versions of the Mac OSX operating system are able to run 64-bit applications.
    See this document for details:
    "64-bit Windows required for After Effects and Premiere Pro CS6"
    In general, you can only download and use applications for which your computer system meets the minimum system requirements.
    Premiere Pro system requirements
    After Effects system requirements

    Who's says that Microsoft can't debug?
    I used msconfig, first disabling startup items, -same result.
    Enabled all startup items, disabled all non-microsoft services - AE worked!
    I re-enabled each service in turn until AE crashed.
    The fault was related to an item for a video streaming device I have in my house.  It was Monsoon-multimedia's Vulkano Service.  Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen.  It does load a couple of virtual devices in device manager, and uses a proprietary codec.
    I uninstalled the vulkano streamer application and rebooted the external Vulkano device.  I reinstalled the Vulkano and verified it connected to the device and could stream.  Once it did, I tried AE again and IT WORKED!
    I wonder if simply rebooting the Vulkano would have fixed it.  Its like opening the garage door to turn on the refridgerator.
    Thanks for the help!
    Jim

  • Dynamic Link from After Effects CC to Premiere Pro CC Performance Issues

    I just updated my After Effects and Premiere Pro to CC and since doing so I've found numerous performance issues.  One that is seriously hurting my workflow is the poor performance of the dynamic link with After Effects compositions into Premiere Pro.   In CS6, you could make a change to the AE composition, save it, click over to Premiere Pro and it would quickly update and you can play your timeline and preview your changes.  You could also move the clips around and add cross dissolves and watch the changes quickly in Premiere Pro CS6.  Now, since updating to CC, if you save the composition in AE and click over to Premiere Pro it won't update on its own.  Sometimes it just shows a single frame of the AE composition.  I found that if you right click and "Edit Original", go into AE and then click back over to Premiere Pro and it will finally update.   But if you make any changes to the placement of the AE composition on the timeline, or add a cross dissolve, fade, etc. it again won't play the AE composition any longer.  After you make any changes to the AE composition you have to right click and go to "Edit Original", go into AE, and then click back over to Premiere Pro.. Then it will finally update.
    iMac
    Quad Core 3.4GHz
    32G RAM
    OS X Mavericks

    Thanks Kevin.
    Unfortunately in my case the export doesn't solve the issue. The video only looks good while in the composition... I've tried exporting it in all the different formats with several codecs, but to no avail...
    You can check my own post in the After Effects forum: AE linked composition looks different in Premiere

  • After Effects export as Premiere Pro project weird PAL/NTSC problem

    This post is not a question. It's here, because I've found a solution and want to share with You.
    I've noticed a strange problem during export from AE to PR.
    Ok, here I go.
    AE = After Effects CS3
    PR = Premiere Pro CS3
    My AE project is D1/DV PAL Widescreen. It is a sequence of slideshow with some video effects applied. I needed that sequence in PR. I was happy to find a new feature - export as premiere pro project (new for me - i am pretty rookie ;). Thaks to this feature I have saved most of my disk space that is always to low. But, like every first try, this one was not perfect too. I had two problems.
    Problem no 1.
    I opened exported project in PR and saw message like "video effect AE.CC COMPOSITE not present".
    Whole composition was working perfectly except that one video effect that was fundamental for this project.
    *Solution was as easy as it can be. I've just copied that effect from AE plugin folder to PR plugin folder. It worked for this.
    Problem no 2
    Like says AE Help "When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences."
    Project settings in PR was exactly D1/DV PAL Widescreen. So where is the problem You ask?
    Therefore why my Timeline works in NTSC 29,97 frame rate if all settings match PAL 25 frame rate?! I don't know.
    *Solution to fix this annoying bug is to create a new project in PR with all settings for D1/DV PAL Widescreen in this case. Than just import that PR project exported from AE. Now timeline works like it should in PAL frame rate.
    That's it.
    I hope this post is helpful, because I didn't find any answer for this here in Adobe forum.
    Adam

    Who's says that Microsoft can't debug?
    I used msconfig, first disabling startup items, -same result.
    Enabled all startup items, disabled all non-microsoft services - AE worked!
    I re-enabled each service in turn until AE crashed.
    The fault was related to an item for a video streaming device I have in my house.  It was Monsoon-multimedia's Vulkano Service.  Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen.  It does load a couple of virtual devices in device manager, and uses a proprietary codec.
    I uninstalled the vulkano streamer application and rebooted the external Vulkano device.  I reinstalled the Vulkano and verified it connected to the device and could stream.  Once it did, I tried AE again and IT WORKED!
    I wonder if simply rebooting the Vulkano would have fixed it.  Its like opening the garage door to turn on the refridgerator.
    Thanks for the help!
    Jim

  • After effects vs final cut pro?

    Is comparing adobe after effects to final cut pro, a fair comparison? What I mean is, looking around on youtube, I see better... effets on projects made with projects on after effects. now, I love FCP for editing, does adobe give a better program thats can do effects. I am looking to make my videos look more profesional, and I notice after effects has effects built into its system to do effects.
    After looking at this vidoe, im sold, final cut pro can not do this that quick.
    http://videocopilot.net/products/action2/tutorials/guided_tour/

    David Bogie Chq-1 wrote:
    I am looking to make my videos look more profesion< </div>
    Effects do NOT make your videos more professional. Professionalism is the only thing that can make your videos appear to have been produced, written, shot, and edited by a professional. Even faking professional video requires elevated professionalism.
    Hey! Just wait one second! That's is NOT what is promised by Apple and whoever makes those promises! All I have to do is buy the computer and the software and I'm a "professional!"
    But I truly and strongly encourage you to go ahead and purchase After Effects based solely on the Video Copilot tutorials. Know in advance that AE is about ten times as complex as FCP ever will be and you will want to post extensively in the Beginner's AE Forum on the cow.
    bogiesan
    I would also suggest extensive posting in the FCP Beginners forum on the Cow for the OP.

  • After Effects and Adobe Premiere Pro

    I thought After Effects and Adobe Premiere Pro were part of the cloud. Neither appeared in the download manager and I'm not able to install.

    This question gets asked a lot because, rather than putting a simple, clear explanatory note into the Application Manager, Adobe confusingly opted to simply omit apps not supported by your operating system from the download screen thereby leaving users such as yourself bewildered as to why those apps are not available for you for download.
    Many people often think their Application Manager is somehow broken or corrupted.
    I take it that you're running Windows XP 32 bit or Windows 7 32 bit?
    Neither will run PP or AE unfortunately so those apps  are not available for you to download.
    64 bit operating systems only.

  • After Effects project into Premiere Pro

    I am having trouble importing my After Effects  project into Premiere. It isn't playing once I bring it in to my premiere.

    What versions of After Effects and Premiere Pro? What operating system? What kinds of source footage?
    What exactly are you doing? What menu commands are you choosing, and what things are you clicking, and in what order?
    Here is a page that describes ways to move things from After Effects and Premiere Pro and vice versa:
    "Working with Premiere Pro and After Effects
    There are many ways to move things between these applications, but importing an After Effects project into Premiere Pro is not one of them, so I'm confused by your issue as you've stated it.

  • After Effects CS6 and Premiere Pro CS6 Long Startup and Application Hang

    Problem:
    After Effects and Premiere Pro CS5.5 and CS6 are very slow to start all of a sudden.  Around 5 minutes to get to/by the intro dialogue box.  For AE, the majority of the time is spent on the "initializing user interface." Then, if I can make a comp, and even a layer inside that comp, it will "Hang" if I attempt to open AE's General preferences for example (no preferences window ever comes up).  This "hang" is what the Event Viewer in windows calls it, with the faulting module being afterfx.exe.  Premiere is not much different.   It makes it to the new project window fast, but after setting project parameters and creating the first sequence, I can't get into the preferences either and the application hangs.  It is important to note that if I have another application open, like Chrome or Firefox for example at the time the application hangs, they will freeze as well.  As soon as I kill the Afterfx.exe process, they come back to life.
    I have read nearly all threads on the subject, and am struggling to find a solution:
    Deleted preferences folder under my username's appdata.
    Turned off Firewall (network traffic from dynamiclink, qtserver, etc was allowed, but what the hay)
    ran windows system file checker/malwarebytes/rkill/rootkit detection.
    checked for windows compatibility checkboxes under the file.
    Uninstalled Wacom Tablet drivers
    Disabled Aero
    Started with ctrl-alt-shift to delete pref.
    uninstalled video driver and replaced with one 6 months ago.
    uninstalled, reinstalled, and tested various quicktime versions back to version 7.69
    moved plugins folder
    moved opengl's plugin out of the folder temporarily
    Disabled all 3rd party codecs (xvid was the only one installed and for months)
    reinitialized default directshow filters
    checked for adobe font list (none found) and removed any fonts from 1 month ago to present.
    used msconfig to selective startup without other applications/services running.
    Uninstalled all adobe products, and reinstalled.
    I performed all of these in a systematic manner, trying to solve the problem.  None have fixed the problem.
    So it doesn't seem to be a network issue, a codec issue, a plugin issue, a driver issue, font issue, or conflicting application.  Any thoughts?
    System Info:
    PC Windows 7 pro 64-bit SP1
    Core i7 - 960 24GB ram
    AMD Radeon 6750  v12.10
    Adobe CS6 Master Collection

    Who's says that Microsoft can't debug?
    I used msconfig, first disabling startup items, -same result.
    Enabled all startup items, disabled all non-microsoft services - AE worked!
    I re-enabled each service in turn until AE crashed.
    The fault was related to an item for a video streaming device I have in my house.  It was Monsoon-multimedia's Vulkano Service.  Sometimes under the old name of Hava, this is an app that acts like a sling-box to send my Cable TV to my screen.  It does load a couple of virtual devices in device manager, and uses a proprietary codec.
    I uninstalled the vulkano streamer application and rebooted the external Vulkano device.  I reinstalled the Vulkano and verified it connected to the device and could stream.  Once it did, I tried AE again and IT WORKED!
    I wonder if simply rebooting the Vulkano would have fixed it.  Its like opening the garage door to turn on the refridgerator.
    Thanks for the help!
    Jim

  • After Effects and Adobe Media Encoder CS5 Both Hang on Start-Up

    I've got problems with After Effects hanging when I start it up on my Mac Pro 2.66 Ghz. (OS X 10.6.7 with 20 Gb of RAM). The program starts, but hangs when MediaCore is initialized.
    The same thing happens with Adobe Media Encoder CS5, but it hangs when ExporterQuickTimeHost.bundle loads.
    I have tried repairing permissions and repairing my hard drive, but neither program has responded.
    Anyone have an idea on a way around this for either program?
    Thank you!
    David Biddix

    I'm having this issue as well, I've spent all morning researching what the problem is, but nothing is working for me. I deleted everything from my Quicktime folder because I read it could be a codec problem to no avail (thankfully I backed it up beforehand), I don't have a firewall, I can't think of any reason that it would freeze.
    I'm running this on a MacBook Pro 15 inch version 10.6.7
    Processor: 2 Ghz Intel Core i7
    Memory: 4GB 1333 MHz DDR3
    I bought this computer two days ago mostly to run AE and I'd really like to get some work done!
    My firewall is set to allow all incoming connections.

  • I can't find After Effects CC on Mac Pro

    On my Apps list is says that After Effects CC is up-to-date, but I've searched the Mac and can only find a older version of After Effects CS5. I've also tried to uninstall the App but it cannot find it. Any Ideas?
    (Mac Pro 2.26Ghz Quad-Core Intel Xeon, running OS X 10.9.2)

    CC desktop lists applications as "Up to Date" when they are not
    -http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html

  • Can't apply transitions to After Effects comps in Premiere Pro

    Hi people, newbie Premiere user here (my boss is trying to convert me from FCS) :-)  I downloaded the trial version of CS5 and want to learn as much as I can before my initial 30 days is up.  My initial experience has been pleasant, but I've come up against an obsticle I could sure use some help with.
    1)     Creating my timeline with serveral clips
    2)     Exporting certain clips to After Effects; 'Replace with After Effects composition'
    3)     Adding my effects
    4)     Back in Premiere Pro my clip is replaced by the comp.
    5)     Try to apply a simple cross-dissolve across 'Comp 01/Comp 02'
    PROBLEM!
    Seems the transition will only snap to the start of the second comp.  With clips I can drag & drop the effect to span the clips and get perfect results, but not on an After Effects comp.
    6)     In Premiere Pro 'Effect controls' change parameter so that the transition centre is at 'cut'
    The result indeed spans the clips, but the effect quality is terrible - decent fade from comp 01 to a sudden dip to black before fade-up on comp 02.
    Yes, I understand the 'Layers' concept, but I'm not asking the software to do anything nonsensical, just a simple cross-fade across 2 comps.
    I really would appreciate any advice anyone can offer, I'd really like to be converted (mainly because if I AM my boss has promised to buy me a licence when my 30 days are up!) :-)
    All the best
    Steve

    To expand a bit on Colin's comments, back in the film days, the concept of Handles was easy to grasp, as the pieces of film were on an A and a B Roll, and the editor had to physically overlap them by the desired amount, so that the lab could print with a Dissolve. The same held for the days of A-B Roll digital editing, where the Clips were again physically overlapped on separate Tracks. Then, digital editors were developed that allowed one to edit with the Clips on a single Track, and where Transitions were applied between them. The Handles were necessary still, but were no longer visually obvious.
    These images will tell you a bit more about the concept:
    Hope that this helps,
    Hunt

  • Creative Wedding Transitions & Effects for Adobe Premiere Pro CS5 or CS5.5

    Hi!
    I am Professional Wedding Video Editor. before that i was using Pinnacle Studio 14 and Canopus Edius Pro but these Sucks, Now i have Intel Core i7 Extreme 64 bit OS and using Windows 7. I just Buye the Adobe Creative Suite 5. and soon i will Upgrade to Adobe CS5.5 . this is the Great Video Editing Software i Ever Seen. But i found some standard Dissolve & wipe Transitions in it.
    My Question is that can i Use 3rd Party Creative Video Effects & Transitions with Adobe Premiere Pro CS5?
    i want to know about thier names. that has Great transitions and smooth Transitions ever.
    Thanks
    Looking forward for Great Response.
    Regards,
    Waseem

    Once, one could use the Hollywood FX Transitions (available from Pinnacle), but I believe that as of about CS4, that is no longer possible, but since Zac did not mention it (also, I think that Pinnacle no longer works with Hollywood FX, and they might be history?), I assume that CS5/CS5.5 does not support them either.
    Pixelan (mentioned above) is a great resource for Transitons, and I recommed them highly.
    I also have ProDAD's Adorage, but do not use those that often.
    My normal Transitions are just Butt-cut, Cross-Dissolve and Dip-to-Black.
    Good luck,
    Hunt

Maybe you are looking for