After effect, removing a back ground noise of the audio

Hi,
I am trying to edit the audio of a video. The video is a simple speech. There is a back ground noise(door shot) which I need to remove it.
I have been trying many different ways, but they have effect on the original speech.
Is there anyway that I can remove only the noise of the door shot without affecting the normal speech?
Thanks,

Even dreaming to do this in AE is futile. You need to move on to a specialized audio editing program like Audition. That said, any audio processing will of course also affect stuff you want to retain and you may face extra work compensating for that.
Mylenium

Similar Messages

  • Is after effects cc trial a separate install from the subscription version?

    is after effects cc trial a separate install from the subscription version?

    Thank you Mylenium. All this time I have been absolutely convinced that you don't need to defragment SSDs. Is this a complete misunderstanding? Even if you do though, I have Windows 8 (not 8.1) which is doing that once a week automatically (apparently even to SSDs).
    Are you saying that the 30GB disk cache set up works like a contiguous file?
    i7 3930k (12 virtual cores) on P9X79 Deluxe
    2 x 120GB Force GT Raid 0 SSD on SATA 6gb/s is my boot drive as well as where I keep programs and the disk cache. I do a disk clean up to remove temp files a couple of times a week but that's all.
    1 x 3TB Barracuda on on SATA 6gb/s for back ups and exports
    3TB Lacie on USB 3 for source video and project files
    2TB Lacie on USB 3 for archive projects
    660ti 2GB
    I'll try a manual defrag of my RAID 0 SSDs now.

  • Genetare the back ground jobs of the program from the SM36 tcode

    Hi All,
        Consider the following points:
    -- My main program will schedule the jobs using the CALL TRANSACTION method
    -- Now i want to create a Variant for the Main program and generate the back ground job using the SM36 Tcode
    -- Finally it has all the jobs of the main program
    -- Program is working fine from the Frontend only.....
    Please provide solution for the same.
    Thanks in Advance.
    Regards,
    Ramana

    Sravya,
    On SM36 when you schedule jobs, you will see options like AFTER EVENT and AFTER JOB. You can use these to schedule you jobs accordingly. Else you can also think of making each of these jobs as a steps in one single job if your requirement allows you to do the same.
    In case of using events, you should make sure to raise the event using available FMs.
    thanks,
    Vikram.M

  • Hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

    hey guys, I'm having trouble matching the colour of the image back ground (white) with the pre-set colour selection. is there a tool that can help me? thanks

    Your description of the problem is not quite clear so I made certain assumptions. I hope I am rigtht. I believe you have a color patch such as this:
    that you would like to place in an image area that has modeling in its white background. You do not want to lay in a flat color but rather to add a color and not lose the modeling or other background tone. The problem is, after making the selection, if you use Edit > Fill and set the Blending mode to Color, the white background remains white. The only colored background area may be an object's shadow or some similar area that is not pure white. (Image 2) It is an unsatisfactory result.
    If that is an accurate description of the problem, consider this:
    Image 1: The original image
    Image 2: Edit > Fill with the Blending mode set to Color. White remains white
    Image 3: Mode changed to Lab Color. Edit > Fill with the Blending Mode set to Color. Then return to RGB.
    (I would not normally use this green as a replacement color but since it is a Tiffany clock, I chose a light version of Tiffany's trademark color.)

  • After Effects error: There was an error processing the PDF document.

    I have been struggling with this problem ever since CS4 was installed.
    I have the CS4 Mac Master Collection.
    I am using Illustrator to create text for animation in After Effects.
    I can create text in Illustrator and import it into After Effects fine. But when I go to make a change to
    the Illustrator file, even as simple as changing a color, I get this error.
    After Effects error: There was an error processing the PDF document. The file may be damaged or corrupt. (50::29)
    The Illustrator file is then toast as far as After Effects is concerned. It cannot be opened or reimported.
    I have to start over again and over again, rebuilding the Illustrator file each time.
    HELP!!!

    This is an issue with AI and ultimately therefore also the AI routines that AE shares to access such files. Has been there forever and neither the AI people nor the AE team seem to be able to fix it in a consistent manner. Simply save a copy of the file from AI, then use Replace Footage instead of reload or at least always fully reload the AE project.
    Mylenium

  • "Adobe After Effects CS6" can't be opened because the identity of the developer cannot be confirmed."

    I downloaded After Effects CS6 trial. when I press on it , it says “Adobe After Effects CS6” can’t be opened because the identity of the developer cannot be confirmed." what should i do ?

    Mac Unidentified Developer Issue
    Here's how to open apps that apple should not be blocking: 
    http://www.imore.com/how-open-apps-unidentified-developer-os-x-mountain-lion

  • I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'.  That was the first window.   Heres the second: After Effects can't continue: unexpected failure during app

    I installed the CC trial with an error window saying: Could not create the file '/Users/dranim/Library/Preferences/Adobe/After Effects/13.2/dummy'.  That was the first window.   Heres the second: After Effects can’t continue: unexpected failure during application startup  I paid for the month subscription of 29.99. It claims it is downloading again?! Am I missing something here? Why is this process so complicated? I need to get this resolved asap and start working.

    I originally had Adobe Photoshop Extended, then upgraded to the Production Suite. I ran the Adobe Cleaner, and that uninstalled most Adobe products, including my existing Adobe install, and then I re-installed everything with the same error code. Since CS4 came with CS5, I've installed AE CS4, but would really like to upgrade because I'm new to Creative Suite, and not sure how CS4 integrates with CS5...CS4 After Effects installed perfectly. I do have a 64 bit system, and installing to an OCZ Vertex 2....every other suite installs perfectly, except AE. And I think that is the coolest program in the Suite. I thank you all so much for taking the time to help, I really want to get AECS5 running...I did try to install after doing the recommended items Adobe suggests for Exit Codes 6 and 7, including turning off many startups...
    I'm baffled....
    Ben

  • You are running an operating system that After Effects no longer supports. Refer to the system requirements for a full list of supported platforms.

    Help when i try to download the after effects trial this is what it comes up with
    You are running an operating system that After Effects no longer supports. Refer to the system requirements for a full list of supported platforms.

    See the system requirements for each version of After Effects:
    System requirements | After Effects

  • Cannot download trial version. This always appear "You are running an operating system that After Effects no longer supports. Refer to the system requirements below for a full list of supported platforms." PLEASE HELP.

    Cannot download trial version. This always appears "You are running an operating system that After Effects no longer supports. Refer to the system requirements below for a full list of supported platforms." PLEASE HELP.

    Hello,
    in this case please have a look here where you can compare it with your equipment : System requirements | After Effects.
    Good luck!
    Hans-Günter

  • After Effects CC: When I import .MOD video, the right side is cut off in the viewer.

    After Effects CC: When I import .MOD video, the right side is cut off in the viewer. I've tried everything. Any suggestions?

    I just started using After Effects, so I'm new to all of this. All I can find on the media player is "fit to window".

  • Downloaded from the site of adobe after effects cs6 want to install click on the install button and it won't open

    downloaded from the site of adobe after effects cs6 want to install click on the install button and it won't open

    Wrong forum.
    This place supports Apple software. You need to ask this on the Adobe AE forum.
    Good luck.
    x

  • How to change the back ground colour of the firefoxweb page

    I tried to upgrade Fire fox Mozilla as requested from the home page.. but it did not complete.
    When I went to surf the net the background screen colour was Black and now I could not see the web pages clearly, as some writing is in colour and does not stand out against the black background.
    It used to be a dark pink which was horrible when I used to view some web pages such as Ebay.. can anyone help change the back ground colour on the home page of Firefox.
    Regards
    Simon

    Hi,
    Please try enabling '''Allow pages to choose their own colors, instead of my selections above''' in '''Tools''' ('''Alt''' + '''T''') > '''Options''' > '''Content''' > '''Colors'''. [https://support.mozilla.org/en-US/kb/Options%20window%20-%20Content%20panel Options > Content]
    If the problem persists please also check in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
    [http://kb.mozillazine.org/Problematic_extensions Problematic Extensions]
    [https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]
    [http://support.mozilla.com/en-US/kb/Uninstalling+add-ons Uninstalling Add-ons]
    [http://kb.mozillazine.org/Uninstalling_toolbars Uninstalling Toolbars]

  • After exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

    after exporting a video from imovie, to quicktime, the audio has been duplicated. How can I fix this?

    iMovie works best with uncompressed audio. If your track is MP3 or AAC, you may get better results by converting your track to the AIFF format and then using that in iMovie.
    You can do this in iTunes. Go to iTunes/Preferences and click the General button. On the General page, click the Import Settings button. Choose IMPORT USING: AIFF ENCODER.
    (note: remember what you changed it from so you can change it back later, before you import another CD)
    Now, in iTunes, select your track. Then click FILE/CREATE NEW VERSION/AIFF VERSION.

  • How to get rid of wind noise on the audio track

    I am sure there must be a method to get rid of wind noise on the audio track. Can someone tell me what the best filter is for this purpose as I shoot mostly outdoors and even with a sock covered mike I pick up the wind noise? I have FCS and therefore Soundtrack Pro. Are there filters in the audio filters section of FCP or must I go to STP? Thanks in advance!
    Powerbook G4   Mac OS X (10.4.7)   4 x La Cie 250Gb HDD
    Powerbook G4   Mac OS X (10.4.7)   4 x La Cie 250Gb HDD

    I shoot mostly outdoors too, and it gets pretty windy where I live!
    > I shoot mostly
    outdoors and even with a sock covered mike I pick up
    the wind noise
    I hope you mean you have a Rycote "Softie" or something similar protecting your mic . . ?
    If so, you should be able to shoot in quite a high wind without any "wind noise" - but of course, even if your "sock" is correctly fitted and working well, you'll pick up the sound of the wind (different thing altogether).
    If you have the right gear and are experiencing the buffeting sound you get with an unprotected mic, then I suspect there are gaps somewhere - so tape them up!
    Either way, for removing unwanted sound, I know of no tool like the Linear Phase EQ filter in STP. Like everything new, it takes a little time to learn but it's very well worth it. With practice, you can almost slice out much unwanted sound like a knife.
    I'm not sure why you don't want to use STP - it opened up a whole new world to me - and it's easier to learn than FCP IMHO.
    Andy
    G5 Quad. 8 GB. 250 & 500 GB Internal HDs. G-Tech G-Raid 1 TB. FCP 5.0.4 (Studio)   Mac OS X (10.4.7)   Sony HVR-Z1E.
    You can't educate pork . . ..

  • Best export format for importing into After Effects or even back into Premiere

    Please look at this video, work in progress.
    http://www.youtube.com/watch?v=49_wbdKALQk
    The opening, featuring a ribbon of videos, was created in After Effects, using Digieffects Freeform.
    The  issue is the poor quality of the videos that are featured in the  opening -- compared to the high quality of videos from the original Premiere  project., which you can see at the end of the clip.
    To create the After Effects project, I exported a series of video clips from Premiere  to mp4.
    Then I imported them into AfterEffects.
    The bottom line, and the purpose of this question, is I am thinking that  MP4 was not the best choice for the Adobe Premiere export.
    What  is the best format to export video from in Premiere Pro CS5 to import  into after effects, or to import into any other editing program,  incuding importing right back into Adobe Premiere, if that is eever  needed.
    AVI?
    MOV
    MP4
    And any other settings that will result with the highest qualiity videos for importing.
    Thanks

    Okay, here's where I stand at this point regarding exporting and/or dynamic linking between AfterEffects and Premiere.
    I'm in After Effects.  I create a composition I like.  So I first tried the old fashioned way. I exported it into a MOV file with the animation preset. Millions of colors.  Same frame rate as my Premiere project, which also uses MOV files with no problem.
    Howver when I import the MOV file created by After effects, the NEW MOV file section of the premier project plays sluggish.  And it also causes the videos that follow to play sluggish.   And they are all MOV files at the same frame rate.
    The same thing happens when I do a dynamic link between the two projects.  A sluggish response starting with the After Effects dynamic link and affecting the MOV video files that follow.
    It's a very short After Effects composition.  About 3 second slong.
    I have a very powerful computer built especially for CS5 and premiere --so that should not be an issue -- recently was in the top ten of the benchmark list.
    Up to this point my video files have played perfectly layer upon layer with no problems.
    Is there something I am not considering?
    Thanks.
    Rowby

Maybe you are looking for