After Effects 9.0.2.42 Windows 7, Not installed in 64 bit section

How do I know if  I am utilizing the 64 bit version of After Effects. It installed in Program Files (x86). Where Photoshop installed in the (64bit) Section. I am using 12 GB Ram and want to utilize as much as I can.
In Multiprocessing Under "Render Multiple Frames Simutaneously" I have a Minimum allocation per CPU set at 2 GB with a max option of 2.8.
Under System also in Memory & Multiprocessing. It says
Installed CPUs: 4
Installed RAM: 11.99 GB
Total After Effects Memory usage: 9.99 GB
Ram to leave for other applications: 2 GB
I'm just confused why Photoshop was the only CS4 program to install in the 64 bit Program Files section and everything else was installed in x86.
Thanks for any info.

Thanks for the link...
". This means that after 3 versions of supporting both 64- and 32-bit, the next version of After Effects will only support 64-bit operating systems."
So are you 100% positive that CS4 is 32 bit except for Photoshop which is 64 bit.
Moving on... what roll does getting one of there suggested high end video cards. I'm looking at the NVIDIA Quadro® FX 3800. I was looking at this page, http://www.adobe.com/products/creativesuite/production/performance/

Similar Messages

  • Hi, I upgraded to Creative Cloud 2014 and now After Effects and Premiere says that Quicktime is not installed. With Adobe Premiere, the application crashes soon thereafter.

    Please help. This is uber-frustrating.

    Being a Mac, is Quicktime installed by default, or do you have to manually install it as in the Windows world?
    These may not help, but since I'm on Windows I only have a few saved Mac links
    next link says After Effects, but check YOUR permissions !!!
    http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml
    Mac 10.9.4 and OpenCL issue https://forums.adobe.com/thread/1514717
    And some older links
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -and https://forums.adobe.com/thread/1507936

  • How much does Premiere Pro and After Effects rely on the hard drive it's installed on?

    This may be a really dumb question, but how much does Premiere Pro and After Effects rely on the hard drive it's installed on if all your video files, assets, disk cache, etc are on different drives than the one the program itself is installed on?
    The reason I am asking is that I currently have a "relatively" slow Sata II SSD for my C drive that has just my OS (windows 7 64bit) and programs (adobe editing programs, no games) installed on it and nothing else. All of the files used in my projects are saved on either a very fast Sata III SSD or a slower HDD depending on what the files are. For example, disk cache on the Sata III, stills on the HDD.
    Being cyber monday I have the opportunity to buy another very fast Sata III SSD to replace my current Sata II SSD C Drive (just OS and programs). Both synthetic and real world benchmarks show a near double in performance. I just want to know if anyone thinks the upgrade is even worth it because for all I know there won't be any increase in performance since no videos, still, cach, etc will be stored on the C Drive.
    The alternative is to get a second monitor because I currently only use one 21" monitor.
    I suppose another alternative would be to not buy anything on the cyber monday deals and just save money for something else.
    Any advice or input would be greatly appreciated. Thanks!

    Thanks Alex! I think you are right about not being able to notice the difference between the SSDs. I ended up finding a deal to get about $80 off a great monitor that I've been looking at for a while and decided to pull the trigger on it. I thought about it and realized that there have already been a bunch of times where I want to watch a tutorial on youtube and follow allong in AE or PrePro, but have to keep switching windows. I also frequently want to have my video preview on a separate monitor so I can have a taller timeline window. This monitor will help a lot with that. Thanks again for your help!

  • Both After Effects & Adobe Media Encode CC giving are not letting me export.

    Dear All,
    Both After Effects & Adobe Media Encode CC giving are not letting me export movies.
    Some times they will, but after one file both programs give me the following error messages.
    After effects:
    “[file path and name].mov. An output module failed. The file may be damaged or corrupted. (-1610153464)"
    AME:
    "Can't read from source."
    I've went through the forum and found threads & pages discussing the problem.
    E.g.
    http://blogs.adobe.com/aftereffects/2013/08/solutions-for-problems-with-quicktime-files-in -after-effects-cc-12-0-because-of-conflict-with-dvcprohdvideoout-quicktime-component.html
    http://forums.adobe.com/thread/1252092
    After following all the tips and suggestions (from deinstalling quicktime components & audio components to completely reinstalling CC) I'm still experiencing the problems.
    Which leaves me in a bit of a squeeze. I need to export over 144 movies in the coming 2 days and the only way to do this is to quit and open media encoder (or AE) after each single export.
    Not really an option.
    Both problems have the process Adobe QT sever in common, I took this from the console:
    9/26/13 1:02:44.517 PM com.apple.launchd.peruser.501[171]: ([0x0-0x42042].com.adobe.Adobe QT32 Server.application[331]) Job appears to have crashed: Segmentation fault: 11
    9/26/13 1:02:44.672 PM ReportCrash[354]: Saved crash report for Adobe QT32 Server[331] version 7.0.1 (7.0.1.0) to /Users/martijn/Library/Logs/DiagnosticReports/Adobe QT32 Server_2013-09-26-130244_martijns-MacBook-Pro-2.crash
    System information:
    Retina MacBook Pro (Mid 2012) (16gb ram)
    Mac OS X 10.8.5 (12F37)
    Running Adobe CC (for teams), all apps are up-to-date.
    I don't no why Adobe puts out such a buggy piece of software (I know it has to with Apple's poor 32bit quicktime implimentation, but hey, this was known information no?).
    Upgrading to CC has given our office nothing but problems.
    Hope someone can help to find a work around until Adobe realeases a proper update and solves this problem once and for all.
    All help is much appreciated.
    Kind regards,
    Martijn

    Hello Tim,
    Thanks for the really quick response!
    Regarding the crash log: it doesn't reference com.apple.audio.CoreAudio (though it did before, so I followed all the steps in your blog post before I posted to this forum).
    I've uploaded the crashlog to:
    http://martijnlambada.com/TMP/AdobeQT32servercrash.zip
    If you want to inspect it. It mentions the DXV codec (which I also uninstalled), but the crash keeps occuring. Also I need to export to DXV since it's the only codec the d3 media
    server accepts (http://d3technologies.com).
    I followed all the steps in the troubleshooting steps.
    Codecs used: I've tried everything from animation to Apple ProRes (including: h264/motion jpeg/uncompressed). With all codecs the Adobe QT32 server keeps crashing (though I can't always reproduce).
    Export destination: Internal SSD (same as where the OS is installed on) + External raid (via firewire & thunderbolt) + external HD via usb 3.0 (tried everything).
    When does the problem start: Really hard to specify, sometimes a day without crashes, sometimes every export for days on end. Sometime after restarting (tried logging out, restarting, switching off and on the computer). With other programs running and with out. Now checking every process active when exporting, and comparing log files.
    Can you export to other formats: See question 1, sometimes I can, sometimes not.
    When you launch AE and/or AME, is QT32 Server running? At what point does it stop running?  Still runing when I open the program. It crashes when exporting (ofter after finishing the first export).
    What component files are in your Library/QuickTime folder?: Currently the folowing:
    AppleAVCIntraCodec
    AppleHDVCodec.component
    AppleIntermediateCodec.component
    AppleMPEG2Codec.component
    AppleProResCodec.component
    DesktopVideoOut.component
    DVCPROHDCodec.component
    DVCPROHDMuxer.component
    DVCPROHDVideoDigitizer.component
    DVCPROHDVideoOutput.component
    DVCPROHDVideoOutputClock.component
    FCP Uncompressed 422.component
    iChatTheaterPreview.component
    IMXCodec.component
    LiveType.component
    Hope this helps.
    Cheers,
    Martijn

  • When I launch After Effects I get a warning saying: Could not create the file'/Users/mayname/Library/Adobe/After effects/13.0/dummy'.

    When I launch After Effects I get a warning saying: Could not create the file'/Users/mayname/Library/Adobe/After effects/13.0/dummy'.

    See this:
    fixing permissions problem that impedes start of Adobe applications

  • HT5628 i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

    i was installing windows 8 on mac by boot camp and after i put the windows code and choose the partition i formatted the boot camp sector it said windows can not install on this sector because it is gpt

    Reinstalling Mavericks depends on several factors:
    if you erased your recovery partition
    what OS originally came on your Mac.
    I'll assume you don't have a backup available that you made before your mishap,  because you didn't mention it.
    That's really the take home message here: have a backup!
    If you still have your recovery partition:
    boot into the recovery partition (command R at restart)
    use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
    if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
    If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
    If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
             (the reference refers to ML but it applies just as well to Mavericks).

  • After Effect CC and Flash Pro CC did not successfully update 19th June '14

    After Effects CC and Flash Professional CC did not successfully update, even after several attempts. All other Apps are currently up to date with today's update release. 19th June '14

    Hi Rob,
    Did you get any error message when you tried to update After Effects CC? Can you share more details?
    Thanks,
    Jyothi

  • Whenever i open itunes after installation it says error 7 itunes was not installed correctly

    whenever i open itunes after installation it says error 7 itunes was not installed correctly

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The section Install missing components may allow you to install Apple Application Support.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Touchsmart IQ524 hard drive crashed. Ran Recovery CDs and I get an error Windows can not install on

    I have an HP Touchsmart IQ524 which the hard drive crashed.  I replaced the hard drive with the exact same model.  I run the Recovery CDs (which I purchased from HP website) and it goes all the way through the process and after the reboot I get a message that "Windows can not install software on this hardware" - so it never completes the process.  I have formatted the hard drive and bought and returned 3 hard drives.  Any suggestions and assistance will be greatly appreciated.

    Hi:
    I love recovery disks when they work, and HATE them when they don't.
    Fortunately, I have a workaround for you which isn't as good as a recovery disk, but it is better than pulling your hair out, and getting nowhere.
    First of all, before you try this, did you perform the recovery with only the keyboard and mouse connected?
    Did you buy the same size or larger hard drive?
    If your answer to either question is no, then that may be the problem.
    Now to the workaround...
    If you're up to a slight but rewarding challenge you can make your own if you can read your 25 character Vista product key on the PC.
    Just download the 3 files you need at the link below, and read all of the instructions to create a bootable DVD installation disk using imageburn.
    Disregard the part of the text under the first screen shot about "extract the files to the Vista folder."
    The files were already extracted to that folder when you ran the X14.exe file by reading the text on top of the first screen shot.
    The other thing I noticed is on the 4th screen shot, where it shows Developer ID Microsoft Corporation. I had to type Microsoft Corporation in myself, and then the other codes automatically populated.
    When I went to compile the ISO file, ImageBurn gave a message that about a WIM file and ISO, and if I wanted to burn it in a different format.
    I selected No, make the ISO file.
    It was not that hard to do. I burned both the 64 bit disk and the 32 bit disk in case I ever need them.
    I tested both of them on my hp dc7100 CMT desktop PC, they worked perfectly.
    When you enter the product key, it knows what version of Vista you have.
    http://en.community.dell.com/support-forums/software-os/w/microsoft_os/3317.2-3-microsoft-windows-v....
    After you successfully install Vista, you can then install the drivers from your PC's support and driver page.
    Paul

  • Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install

    Windows 7 not install in Dell Inspiron 3531. windows 8.1 already install. please guide me

    Can't get you...Do you like to install Windows 7 on Dell Inspiron 3531 which has Windows 8.1 installed? or, you like to have both Windows 7 as well as Windows 81.?
    S.Sengupta, Windows Entertainment and Connected Home MVP

  • Mac OS X 10.10 : After Effect hides when clicking other windows.

    Hello, I'm having an issue with After Effect CC. When clicking on other windows like apps and or desktop or finder windows After Effect will hide I was wondering if this was normal this was not happing when I was using After Effect CS6 and only happen since using CC is there away to fix this or is it normal for After Effect CC to hide when using other windows and or apps ?

    No, it does not happen to any of my other apps on my mac and it does not happen with any other Adobe software like Photoshop, Premiere pro and illustrator. This issue only happens with After Effect CC (this also did not happen when I was using CS6 only since I upgraded to CC (and this problem has been happing before the new mac update to 10.10))
    But thats for the comments and if you find a answer on how to fix it please let me know.
      Thanks for your time and have a great day.

  • Premiere Pro CC and After Effects CC - Dynamic Link of an .aep not working - Stalls during import

    I have been trying to import an .aep file into Premiere Pro CC from After Effects CC. As suggested, I import the file. The dynamic import window appears. It states connected to file along with the import files ... dialogue box. It stalls there.
    I have been working off my network and have all the files collected on my machine.
    My workaround to get me to deadline was to render my clips from AE and import them. Importing the .aep would make more sense from efficiency and workflow.
    Thank you

    Thank You, Jim -
    Unfortunately that specifically did not work.
    Based on another comment sent to me, here is what did.
    In PProCC
    File > Adobe Dynamic Link > New After Effects Composition
    In AECC
    From that composition created from PPro, I imported the project (aep) initially created in AECC from another team member. Saved the file.
    Back in PProCC
    File > Adobe Dynamic Link > Import After Effects Composition
    Magic.

  • After Effects CS6 no longer works now I've installed Yosemite.

    Hi since installing Yosemite on my 3.5 GHz 6-Core Intel Xeon E5 Late 2013 Mac Pro with 16 GB of Ram. I crashes on start up. I reinstalled and then updated to 11.0.4 and it still crashes although I think the error has changed. When I restart I get the error:
    Last log message was: <140735270892288> <DynamicLink> <5> /Library/Application Support/Adobe/Common/dynamiclink/CS6/dynamiclinkmanager.app
    This is a big problem as After Effects is key to my business and right now I cannot use it.
    Please can you help?
    Leigh Emmerson

    Sounds like the typical issue with an updated Mac OSX. Permissions! Follow this: fixing permissions problem that impedes start of Adobe applications

  • After the most recent ITunes upgrade, I cound not install it nor can I now run the old version. I get an error 7 Windows error 1114 and a R6034 C runtime error. Help!

    After running the upgrade to the latest ITunes I cannot run Itunes. I get a Error 7 Windows error 1114, and a R6034 C runtime error.
    It was working before.
    Help!

    Hi sking10313,
    Thanks for using Apple Support Communities.  This article has steps you can take for the error you're seeing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Cheers,
    - Ari

  • CS5.5 Premiere Pro & After Effects launch in one user profile but not the other

    I’m having two issues. One with AE getting hung up on loading the MediaCore and the other with Premiere Loading the ExpoerterQuickTime.bundle I’ve looked and looked for solutions and haven’t found any with my problem.
    I’m running a Mid-2010 MBP 8GB RAM with Lion and CS5.5 I’ve done a uninstall and reinstalled and still same problem. It works on other user profiles on my computer but not mine and that’s the one with all the content! Any help?
    I launched AE with Alt+Command+Shift down which reset my preferences and whatnot but then it gave me a warning about the MediaCore and let me continue but now it's hung up on the the user interface. I don't know what to do. Any help from anybody would be greatly appreciated!!!
    UPDATE
     Loggin in as the Super Admin User worked for Premiere for whatever reason which is awesome! Thanks!
    However After Effects is still looking for that MediaCore. And now Media Encoder isn't working. (Not that I really use it but if it doesn't work the issue might be somewhere else. Again. I tried all of these in the Super User account and the other normal account and they worked fine. Just not here in mine. Any ideas for that?
     I don't have any firewalls up, It's all wide open. And I tried the second option there of removing all of the quicktime plugins in the Quicktime folder but it still gets hung up on the MediaCore.
    I went into the super user and edited a AE project then came out and open the project instead of the dock icon and it went on and gave me the quicktime isn't installed bit and something might not work properly. But from playing around in it I've not seen anything different. This is an extrememly frustrating situation. I can get both programs open now but it's all janky and isn't working properly. I consider Premier to be a done deal, it's got no issues. I just need to figure out this mediacore business.
    Original Post from the Premier Forum, thought I'd get better luck here in the AE one. Thank you for any help!
    http://forums.adobe.com/message/3901233#3901233

    Yea, it's the main account i use. So I got all the permissions set up correctly. The rest of the CS suite open just fine it's just those two that give me hickups.

Maybe you are looking for