After Effects CC crashes during prerender using Magic Bullet Looks [was: Help me Please!]

im using MBL for effects and CC and outting it on a adjustment layer. everytime i try to prerender it crashes! help me plz!

You want some help from us? Then we need some help from you:
FAQ: What information should I provide when asking a question on this forum?

Similar Messages

Photoshop crash when i use Magic Bullet Looks

Hello, good, I need help because I have been dating a message to start photoshop, which tells me card graphics is not supported, and attempting to open a plugin, such as Magic Bullet Looks, to put ok, shut me photoshop, and this had not happened to me before, what can i do?
i have WIN 7
Intel core (TM) i7 2.00 GHz
6 gb of ram
64 bits

I did a quick google search for "Magic Bullet Looks plugin" The first one I found does not even seen to be a Photoshop Plug-in Is this the plug-in your trying to use in Photoshop? Seems to be for video editing software. Photoshop can do limited video editing but is not listed as supported by this plugin.
Red Giant - Products - Magic Bullet Quick Looks Free 1.4
System Requirements
Quick Looks Free works with:
Adobe After Effects CC, CS6, CS5.5, CS5
Adobe Premiere Pro CC, CS6, CS5.5, CS5
Apple Final Cut Pro 6, 7

I am not able to use Magic Bullet Looks with the After Effects trial

Jeff,
I am having troubles with downloading a trial. I am currently trying to find ways to edit videos using Magic Bullet Looks. I have found many ways, but when I go to download the Magic Bullet looks, it says After Effects cs6. For some reason it does not install even though I have the trial version of After Effects. So when I open After Effects, and go to the effects tab, it does not show up. I have looked on tutorials and many other ways.
I also tried downloading the trial of After Effects at, http://prodesigntools.com/adobe-cs6-direct-download-links.htmlrfer
Please Help,
- jhsurfer

If you're having difficulty installing or using Magic Bullet Looks, then I recommend asking the folks who make that plug-in, Red Giant:
http://www.redgiant.com/products/all/magic-bullet-looks/

After Effects Error: Crash in Progress. Last Logged Message was: 2960

When I Quit Aftereffects I got this Error .,. Can Someone tell me how to resolve this .. I am Using Creative Suite 5 Master Collection
After Effects Error: Crash in Progress. Last Logged Message was: <2960> <ASL.ResourceUtils.GetLanguageIDFromRegistry<0> Unable to obtain the User 'Language' Registry key at: Software\Adove\AfterEffects\10.0\Defaulting to 'en_US'.

INTEL XEON S5000XVN PROCESSOR E5410 @ 2.33GHz 2.33GHz
Installed Memory 4GB
System Type 64bit
GRAPHIC CARD
Nvidia Geforce GTX 285

After Effects error: crash occured while invoking plug-in "looks" (looks 1.4)

After Effects error: crash occured while invoking plug-in "looks". (looks 1.4)
That is the error that i get everytime i try to add the effect to m composition.
Specs:
Processor: Pentium(R) Dual-Core CPU T4300 @ 2.10HGHz 2.10GHz
RAM: 3.00 GB
Video Card: Mobile Intel(R) 4 series express chipset family
Runs with 32-bit Windows 7
Also i get the exact error with
Magic Bullet Celestia

Since you seemed to miss it, I'll just directly give you the link provided on that thread, but I really recommend that you carefully read that thread about the issue that you're facing. It inlcudes information about conflicts with ATI drivers.

After Effects error: Crash in progress. Last logged message was

Witam nie moge otworzyc After effects poniewaz otrzymuje blad After Effects error: Crash in progress. Last logged message was: <2080> <GPUManager> <2> Sniffer Result Code: 3 po kliknieciu ok otrzymuje komunikat ze program after effects przestal dzialac, mam zainstalowana najnowsza aktualizacje. Windows 7. prosze o pomoc

Do you have Windows Service 7 Pack 1 installed? If not, do so.

I just updated to new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. when it comes back to tcp x it's black.

I just updated to the new final cut pro x 10.1.1 and i am also on mavericks so but on my editing timeline i was trying to color grade using magic bullet looks but i am having problem with it. When i send a sample to MBL and color grade it , it comes back to final cut pro x all black even after render. By the way on the MBL i am using the GPU rendering, I used before like 4months ago and it was fine. And i don't like to use the CPU because it very slow.

What is the frame rate of the project? At what frame rate was the media recorded? What frame size?
What are the audio settings?
What are the specs of the machine, in particular how much RAM, how is the hard drive connected, etc.?
If possible, post screenshots of the inspector for the project.
It could be related to the audio frequency?

When ever i try to use magic bullet looks it says that it could not complete the command because of a problem with the filter module interface what do i do to fix that please help

i dont know what the problem is everything else works my photoshop runs really well its just when i try to use magic bullet looks then it gives me the error message

Contact Red Giant and see if they have an update to the plugin that fixes the bugs in the plugin that are preventing it from working correctly.

FCP Crashes while using Magic Bullet Looks

Hi All,
We have recently installed Magic Bullet Looks onto our main edit machine. However, using it causes FCP to crash with really annoying regularity. It seems to be related to either auto save or thumbnails (opening a sequence with Looks applied and it will crash while loading the thumbnails onto the timeline for example - that could be a coincidence as it crashes in many other situations as well but always when working with MBL))
I've tried the usual preference trashing things but can't stop it happening. Anyone had any similar issues that they've been able to resolve? We aren't yet running Snow Leopard but I may try that as a potential solution.
If it matters - the machine is dual 3.2 quad core with 6GB of RAM running FCP 7. It also has a Blackmagic Extreme card (tried turning external video off - no difference)
All thoughts greatly appreciated,
Regards and a happy new year to all,
Richard

Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
R

Adobe After Effects CC Crashes during preveiw

Hey everyone,
     AE CC Crashes during a specific play-through/RAM preview
Video clip used is 60 frame rate 1280 by 720 about 4 seconds long
     Video Edits:
1. use Masking to make a text reveal like its hand written out with Stroke (Said an error happened with Stroke before it crashed)
2. Had the clip 3d motion tracked with the built in 3D Camera Tracker.
3. Optical Flares
     After it crashed I rebooted my computer, reopened AE CC and imported another un-edited clip and it previewed without a problem, did this with many other clips as well. Any help will be greatly appreciated.
     Thanks you for your time.

WIthot proper system info, the crash logs and other technical details nobody can tell you anything.
Mylenium

Adobe After Effects CS4 Crashes During Startup

Hey I have a major problem i think.. after I installed AAE CS4 I picked the trial to see how it was b4 i bought it. Once everything was installed and complete I restarted my computer but when I went to open the program it pulled the grey aae startup box. It had 4% complete and said Initializing Media Core then it just stops and minutes later crashes with not progress. It continually does it with no improvement. Anybody that can help me?

I did all of the above:
- 9.03 update
-   1. Go go Control Panel -> System-> Advance System settings
     2. Click Advanced tab, Performance -> Setting
     3. Click Data Execution Prevention -> Turn on DEP for all programs except those I select - > Here you click Browse and choose where your AE CS4 location is, and click Apply -> OK .
- Run as administrator
Nothing worked. I still get the crash at start-up with the message
<960> <AppDirs> <5> Required Dir=
C:\ProgramFiles\Adobe\Adobe After Effects CS4\Support Files\Required.
and after that sorry, AE can'r continue..
Help me please, I have the 30 days trial and I desperately need to learn how this program works for a project. After that I want to buy it.
My system is 32bit Vista Windows, I installed AE CS4 (that's the last one to run on 32bit right?) and did an update to 9.03.

After Effects CS5 crashing during RAM Preview

After Effects CS5 was working just fine less than 24 hrs ago.
Now I cant even get it to RAM preview some text moving across the screen as a test.
It keeps getting hung up on "Background Process Status Loading Projects..."
Never an issue before. Didnt update or change ANYTHING.
Of course this happens right in the middle of a job...nice....
Utterly frustrated.
Mac OS 10.7.5
2 X 3 Dual Core Intel Xeon (one of the earlier Mac Pro Intel towers)
19GB RAM
ATI Radeon HD 5770 1024 MB

Funny you said that.
That is what i thought the problem might be. I am going to archive some stuff on my hard drive.
That is when the app started having issues. When the project started getting larger and having more elements.
In fact, now i am getting a weird wobble when I render a sequence from premiere. If I only render part of it, it doesnt happen.
Maybe I need to free up some space on my hard drive...?

Help! After Effects Error: Crash in progress. Last logged message was: 6968 GPUManager 2 Sniffer Code: 3

I just installed After Effects though Creative Cloud, and I am getting the above error message. The Logo/Start Up screen for AE comes up, then the error displays. Any tips for getting this to work properly? It will be greatly appreciated!

What operating system?

After Effects CS4 crash during start - MAC

Hello
I have problem with AE CS4 on my mac. I downloaded trial from adobe. Instalation pocess was ok but during start after few first sec. AE is closing themself. There is no massage from AE. Only system is giving info about unexpected closing due to AE error.
Is any body the same problem? If you can, please help me with this or give me info about links where can I find solution.
Thank you

I found the problem and now is working ok. I had to turn off font "Zebra". I think that the same reason for crashes on start was before updateing AE.
INFO.
If you have the same problem like me, the best way is:
Turn off "Zebra" font - Aplications/Font Book. Select all fonts in left collumn. Then select zebra font and remove mark below (turn off). Start AE. If problem still exist, use this link:
file:///Users/mk/Desktop/Troubleshoot%20crashes,%20system%20errors,%20and%20freezes%20(Aft er%20Effects%20CS4%20on%20Mac%20OS%20X).webarchive
There is adobe technical support list with another solutions.
Guy, thanks for help. Good day
Best regards
Michal

After Effects CC crashes PC (BSOD) using Gradient Ramp effect

I've done it three times now to make sure, but whenever I make a solid layer and add the gradient ramp effect, and then change the color, it gives me a BSOD. I've had some BSOD issues while using AE for various reasons, and I've gone through solutions considering disk cache, Open GL rendering, multi-core processing, etc. I'm pretty sure I need to replace a piece of hardware, as each BSOD is indicating such, but I've had a hard time determining which. I should note that going to the color palette for something like text doesn't give this issue. So far it's been for the solid layer and gradient ramp. Note that I've also used other plugins, such as Element 3D and Keylight and such without a problem.
I recently signed up for CC so I haven't yet uninstalled CS6, and I'm doing that as I write this.
My computer is running 64-bit Windows 7, has updated drivers for PSU, ram tested healthy, GPU driver updated, and more. My RAM is 16 GB DDR3 1666 GHz, Processor is AMD Six-Core Phenom 2, GPU is Geforce 470 GTX, and I'm running standard 7200 rpm disk drives. I have intentions to update all of the hardware over time, so I'm wondering if maybe a switch to Intel or an updated GPU might be helpful.
Thanks!
Katie

System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
41
Version
2
Level
1
Task
63
Opcode
0
Keywords
0x8000000000000002
TimeCreated
[ SystemTime]
2014-06-20T03:36:20.388819000Z
EventRecordID
16009
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
8
Channel
System
Computer
Helios
Security
[ UserID]
S-1-5-18
EventData
BugcheckCode
292
BugcheckParameter1
0x0
BugcheckParameter2
0xfffffa800f208028
BugcheckParameter3
0xb66cc000
BugcheckParameter4
0x1c000175
SleepInProgress
false
PowerButtonTimestamp
0
I exported the information and uploaded it to my Dropbox for download: Dropbox - BSOD-Katie.zip
Let me know if I need to give any more information Thank you!

After Effects CC crashes during prerender using Magic Bullet Looks [was: Help me Please!]

Similar Messages

Maybe you are looking for