After Effects CC installation error. Please Help!

Hi, I have been trying to install Adobe After Effects CC, I am using windows 7 x64, the installation only gets to 43% and then comes up with an "Installation Error - Lean More". So I click learn more and this is what appears:
Exit Code: 15
Please see specific errors below for troubleshooting. For example, ERROR:
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 1 error(s)
ERROR: Media DB Error : 12
I am using windows 7 64bit

Yes, I am trying to install AE Through the Creative Cloud app. And yes, I have only just installed the Creative Cloud. The exact steps I am taking are:
First I click on the "apps" tab in the Creative Cloud window, this brings up the list of available trials. Next, I click on the "Try" button next to "After Effects CC (2014)", the installation only gets to 43%. The button "Installation Failed - Learn More".
So when I click on the "Lean more" button, it shows me this error.

Similar Messages

  • Adobe After Effects Cs6 Installation Error. HELP!

    When i do my installation of Adobe After effects cs6, i install as trial version, because i want to see what it is like, and i do everything like everyone says, and then it stops at 2 percent saying Installation Failed and it comes up with these solutions, and i did them all about 5 times and it STILL wont work! SOMEBODY HELP!
    And it also saidthis in the error summary:
    Payload '{0A1E2FE2-B2AD-42F4-9C74-641853FB093A} Photoshop Camera Raw 7 6.0.98.0' information not found in Media_db.

    I have exactly the same problem when installing CS6 Trial.

  • Envy 5640 - Windows Vista Driver Installation Error - Please Help

    Hi
    Having problems installing the supplied (and downloaded) driver for our new HP Envy 5640 on my daughters Sony Vaio running Vista.
    The printer is up and running and working perfectly on our iOS and OSX Mac devices.
    The PC can see and communicate with the Printer.
    But when I go to install the supplied (and the downloaded) driver/software it comes up with the following error:
    <<
    Install Failed
    The software required for your printer could not be installed.
    For more information click the Details button below.
    DETAILS...
    The unsuccessfull instalation will be cleaned up, and then you will be guided through searching for and applying a solution to this issue.
    >>
    Then when DETAILS... button pressed:
    <<
    Installation Error
    Key not valid for use is specified state.
    >>
    I haven't entered a key, nor a state? I'm in the UK.
    Any ideas?
    Thanks in advance
    Dave

    Hello there! Welcome to the forums @Stodgy70 
    I understand you're facing troubles when installing your Envy 5640 on a Windows Vista system.
    After researching the error you're receiving, I would suggest creating a new User Account on the computer and ensuring it has Administrator Privileges, and trying the installation again from there.
    Here is the direct link for you to download and install the printer on Windows Vista:
    HP ENVY 5640 e-All-in-One Printer series Full Feature Software and Drivers
    Please let me know the results, have a great weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Adobe After Effects Dynamic Link Problem (Please Help!)

    Hello i've recently had this problem when i open Adobe it takes a while then i get a message come up about not having Quicktime not installed (Which i do have installed and the latest version) and then it comes up with another message reading this:
    after effects error: Crash in progress. Last Logged message was: <1076> <Dynamiclink> <5> C:\Program Files (x86)\Common Files\Adobe\dynamiclink\cs6\dynamiclinkmanager.exe
    Please can someone tell me what to do?

    The only thing I can figure out is that you are running a Widows operating system and AE CS6.
    In many cases the message that you don't have QucikTime installed is because you have some 3rd party codec packs installed that are fouling up the pointers to QT. If we knew more about your system, the OS version, and what kind of video files you're using we may be able to give you more help.
    One last thing. Have you run the latest CS6 updates?

  • ITunes 8 Installation Error  PLEASE HELP!!

    Ok, I know that this problem has been posted before and the last post was April of 2008.
    I recently bought an iPod Touch (16gb 2nd gen)and I have downloaded the software for iTunes 8 on and I am attempting to install it. When I get into the installation process, I receive an error message that says:
    An error occurred during the installation of assembly ‘Microsoft.VC80.CRT, publicKeyToken=”ifc8b3b9a1e18e3b” (etc). Please refer to Help and Support for more information. HRESULT:0x8007054F. The installation process is then "rolled back".
    Now, even though iTunes will still install onto my computer and appear to function, it will not sync with my iPod Touch. When I plug in my iPod to sync with iTunes, I get this message:
    "This iPod cannot be used because the required software is not installed. Run the iTunes installer to removed iTunes, then install iTunes again."
    I uninstalled iTunes and reinstalled it and the SAME thing happens! I have NO IDEA WHAT TO DO, and I need any help I can get. I have followed all of the information found on different forums online and it either didn't work, or I didn't understand the computer lingo. If anyone knows a solution OR if anyone has had the same issue and found a solution, PLEASE HELP! I didn't get this iPod to not be able to use it!
    HELP!

    Hi M2i7guel,
    Welcome to Apple Support Communities.
    It sounds like there is an issue installing iTunes and other Windows updates on your PC. The article linked below provides troubleshooting suggestions that will resolve most issues like the one that you've described.
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    I hope this helps.
    -Jason

  • Minisap Installation error Please help

    Hi,
    I am trying to install Minisap 6.20 on my PC but the installation stops at 91% with the following error
    Info: DBR3LICENSECREATE SyCoprocessCreate 2 718
    Creating coprocess C:\MiniWAS\saplicense ...
    Info: DBR3LICENSECREATE ExecuteDo 2 718
    RC code form SyCoprocessWait = -112 .
    Error: DBR3LICENSECREATE ExecuteCheck 2 718
    Exit code from C:\MiniWAS\saplicense: -112.
    Error: DBR3LICENSECREATE InternalInstallationDo 2 718
    Phase failed.
    Error: DBR3LICENSECREATE InstallationDo 2 718
    Phase failed.
    Error: Main {} 2 718
    Installation aborted.
    There are the things which have already been done
    a. MS Loopback adapter has been configured fine
    b. 10.10.0.10 <computer name > has been added in the etc\hosts file.
    c. Have tried to install the Sap licence manually using SAPLICENSE -Install ( It installs ok)
    d. Have tried to resume the installation too many times
    f. Have disabled all security features on the PC during installation.
    Not sure why this is not working, I had installed the same SW before the format on the PC. For some strange reason this refuses to work and the installation dosent go past 91%. Please help!!!
    Thanks,
    Poornima

    Hello Every One,
    Thanks for looking into this.
    However the problem I solved the problem by myself.
    The downloaded file is ok. Hence the md5sum mentioned in my below message is accurate. I created another administrator user in windowsXP and tried to install from that user's login.The installation was successful. And now I can access the database from both the logins (the old and the new).
    I hope above will help anyone in future.
    Rgds,

  • Garageband installation error please help??

    At some point in time my GarageBand started giving me and installation error, it says " please ensure this product has been installed properly" if i hit ok i get that message a couple more times and then another message that says "registry error". After i click ok i get this same message about 4 times and then GarageBand hangs there forever until I click the icon again and then it opens fine.
    I have reinstalled the software several times and updated with any updates neccessary with no success. I also have Protools installed on my mac. I never had a problem running both, and I am not sure where these errors came from or how to fix them.
    I have a 2009 Macbook Pro 13" 2.4, with 4gig Ram and am running Mac OSX Version 10.6.8 with iLife11
    Also not for sure if this is related to the errors but everytime I import a stereo mp3 it plays only to the left side. The right side is very week and barely noticable.The wave form on the track shows up that way as well. What may be causing this?

    I looked at the Protools site:  http://avid.force.com/pkb/articles/en_US/compatibility/en352429
    You are having protools 7.4  and mbox; both are officially not supported for Snowleopard, see
    Pro Tools 7.4.2 is not officially qualified with Mac OS X 10.5.5 and higher.
    and
    Not Compatible with Mac OS X 10.6
    Pro Tools 8.0.3 software and higher does not support some retired products:
    Original Mbox
    Your Protools may be causing these messages - check the Console what you see there.

  • Adobe After Effects (CS2) Question. Please Help!!!

    Hi All,
    I use Adobe After Effects CS2 and I am currently trying to make a still 2D Photoshop CS2 Image, into a 3D Short Movie (7 Seconds or so) on After Effects. However, when I import my Photoshop Image into After Effects, it only has a time duration of 2 Frames (0.2 Seconds I think?). I need this duration of time for the picture increased (as it is a still picture movie) but I'm not sure how to do it after fiddling around with my After Effects for about 2 - 3 Hours. I need to be able to put the time duration of my picture so it is able to be showing up on screen for about 15 Seconds. Also, how to you add 3D Text onto an After Effects picture? (In the movie). I really need help with this as I want this After Effects Film to be completed ASAP!!!
    Any help would be highly appreciated!
    Regards,
    TheAAPlus

    > Is CS6 now free?
    No, though there is a free 30-day trial.
    > And is it downloadable?
    Yes:
    https://creative.adobe.com/products

  • Os x installation errors please help

    Hi i appologize from now if i posted this in the wrong place but i have looked around and cant find anything to help me out i have a 15inch macbook pro with no operating system at all. It had 10.5.7 version of operating system x but my sisters friend who is computer illeterate thought he could install 10.6 but he was wrong he ended up deleting the operating system which leaves my sister without her laptop ive tried installing 10.6 but it tells me that it cannot install then quits but every forum i go to tells me that it should work with this laptop
    MacBook pro 3.1
    intel core 2 duo
    2.2 GHz
    Number of processors: 1
    Number of cores: 2
    Memory: 2 gb
    L2 cache: 4mb
    please help i am stuck with a 1500 dollar laptop that isnt working

    The installation disk I´m tryin with is from an 15-inch Macbook Pro I`ve recently bought. The system is snow leopard and I´m trying to install it in my macbook 13 Mac Os X 10.5.5 (originallay leopard) I don´t know if that´s a problem. I´m not using an update dvd. I think the problem is going by the post Mac fix it.
    I read that anyone who has a macbook intel could install snow leopard so I decided to try but it´s too hard. Thanks for trying to helping us.
    PD. Sorry about my english

  • SAP BC Installation - Error - Please help

    Hi Experts,
    While installing SAP BC Developer (4.7 version), I am getting an error
    <b>
    Error: Please use an absolute path instead of C:\</b>
    Any ideas on how to resolve this?
    Thanks!

    Hi,
    Chk this link
    SAP BC 4.7 Installation
    Thanks
    Srinivas

  • After Effects - Problems with rendering - please help :(

    Hello everybody,
    i am sorry about my bad english, but i hope    you can help me somehow. I pruchased the Productions Pro Premium from Adobe some time ago.
    I created some Layers in Photoshop CS4 and  animated them    in After Effects CS4. After that, i rendered a raw file out and imported it    back into After Effects CS4 to save render and preview time. Then the    problems started... my After Effects became laggy and didnt respond for    3-4Seconds. After starting rendering, my PC waited for 10-20 minutes until he    started to render... and longer and later i unchecked the box Write XMP data    in the render settings and the problem has gone. Do you know what i did    wong or why that happens? It has something to do with my losless rendered    .Avis and XMP Metadata... the strange thing is, that this doesnt happens always and with every clips, but maybe there is an anwser for me...
    I got a W7 Os and my PC is very strong with    an i7 cpu and 6gbs of ram..
    I hope you can help me..
    Best    Regards
    ayre_pete

    I've finally gotten around to answering you mail, so let's stick with that.
    Mylenium

  • DTM 6.0 sync error 2753 and windows installer errors, please help

    I have tried install and uninstall over 5 times with the same errors
    , this is what happens when i install
    when i start to install DTM 6 on Win7 64bit, first message i get says.
    Windows Installer, Pending Microsoft Visual C++ 2008 Redistributable, it tried to install this but then says failed to install even though its already installed, therefore i cancel this carry on with the install which completes.
    Now when i run the application and click on back up, i get a box saying The error message says, " The feature you are trying to use is on a network resource that is unavailable".   It is looking for the Apploader.msi file in the C:\Documents and Settings\user\Application Data\Research In Motion\BlackBerry\ directory.. i have tried looking for Apploader.msi but it does not exist so i have to cancel, if i keep pressing cancel it does eventually backup. but i can not sync as every time i try to setup the sync config setting i get a error message. error 2753 The file MsOutlookApiProxy64.exe D9D285E5_C9F0_4101_A12C_555AE1C1593F is not marked for installation
    I have tried searching the web but no one can help, Like you say what the point if i can't sync.
    Please if anyone can help fix this, i would regard them as genius
    Solved!
    Go to Solution.

    Hi beeman,
    Try clean uninstalling then reinstalling the Blackberry Desktop Software 6.0 following this KB article. http://bbry.lv/da1SoE
    Hope this helps,
    -FS
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click Solution? for posts that have solved your issue(s)!

  • Oracle BI Publisher Installation error - please help

    Hi,
    I am trying to install Oracle BI Publisher 10.1.3.4.1 for Windows x86... I downloaded it from Oracle website and unzipped on my local machine. When I click on setup.exe file, Oracle Universal Installer screen appear (kind of command prompt) and it check installer requirements (highlighted in bottom) and disappear automatically....nothing happen after this... no log..no error... i don't understand what happening.
    If anybody knows this issue then please let me know how should i installed this oracle product
    ==================
    Using paramFile: C:\Documents and Settings\sjaiswa\My Documents\Downloads\Oracle_Business_Intelligence_Publisher_Standalone\install\oraparam.ini
    Checking installer requirements...
    Checking operating system version: must be 4.0, 5.0, 5.1, 5.2 or 6.0. Actual 5.1 Passed
    Checking monitor: must be configured to display at least 256 colors. Actual 4294967296 Passed
    Checking Temp space: must be greater than 500 MB. Actual 278727 MB Passed
    Checking swap space: must be greater than 500 MB. Actual 1024MB Passed
    All installer requirements met.
    ===================

    Thanks everyone... please ignore this post... i got answer myself. The problem was coming due to blank space between directory name. I changed temp directory location in system variable and now setup in running fine.

  • SAP BW Installation Error - Please Help

    Hello Everyone,
    I'm trying to install SAP SEM BW 7.00 in one of the servers that we have. During installation, In the Installation Master I'm selecting the central system from the following
    SAP NetWeaver 2004s Support Release 2
    >
    SAP Systems
    >
    MS SQL Server
    >
    Central System
    >
    Central System Installation
    I'm able to select the settings and the installation proceeds as usual, however during the 29th phase of the installation, "Check DDIC Password" fails and an error message is thrown which says
    "Test Logon to SAP system BW1 Failed. Make sure that the system is started, that the user DDIC exists and that the password of user DDIC is correct."
    Initially I though I have to manually start the instance in SAP MMC and started it, even then it gives the same error message, then I doubted that I might have entered the password incorrectly during initial setup, so I formatted the system and started installation again, no use again, it is giving the same error message.
    I'm not sure what could possibly be wrong.
    I would really appreciate if someone could help with with this issue. looking forward to hear some possible solutions.
    Thank you.
    Best Wishes,
    Jegan
    Edited by: Jegan Azhagesan on Nov 24, 2008 8:42 PM
    Edited by: Jegan Azhagesan on Nov 24, 2008 8:43 PM

    Hello Warren,
    I tried to login and change the ddic password, it is not allowing me to login. It says username or password is incorrect.
    In client 001, it says "too many failed attempts and password logon no longer possible, even though that was the first time that I tried to login through GUI"
    I assume that it gives this error because the installation has tried to check ddic password and failed. Let me know if there is anything else that I can do to solve this issue.
    Thanks,
    Jegan

  • B2B installation error=please help urgent

    Hi,
    I am getting below error at the time on intsallation of B2B in client machine.
    I have done the successful installation of j2ee and webcache.
    But during b2b instalation its getting struck at below configuration.
    Please find below error from log:-
    Launched configuration assistant 'Enterprise Manager Agent Configuration Assistant'
    Tool type is: Recommended.
    The command being spawned is: 'D:\oracle\product\10.1.2b2b/bin/emctl stop em'
    Exception occured during spawning :CreateProcess: D:\oracle\product\10.1.2b2b/bin/emctl stop em error=2
    Configuration assistant "Enterprise Manager Agent Configuration Assistant" failed
    Complete log:-
    Configuration assistant "Register DCM Plug-Ins With EM" succeeded
    Result code for launching of configuration assistant is: 0
    Launched configuration assistant 'Enterprise Manager Agent Configuration Assistant'
    Tool type is: Recommended.
    The command being spawned is: 'D:\oracle\product\10.1.2b2b/bin/emctl stop em'
    Exception occured during spawning :CreateProcess: D:\oracle\product\10.1.2b2b/bin/emctl stop em error=2
    Configuration assistant "Enterprise Manager Agent Configuration Assistant" failed
    Result code for launching of configuration assistant is: 1
    The OUICA command is launched from D:\oracle\product\10.1.2b2b\oui\bin\ouica.bat.-----------------------------------------------------------------------------
    *** Starting OUICA ***
    Oracle Home set to D:\oracle\product\10.1.2b2b
    Configuration directory is set to D:\oracle\product\10.1.2b2b\cfgtoollogs. All xml files under the directory will be processed
    Parsing configuration file config.xml ....
    Ended Parsing configuration file config.xml
    Start Processing configuration tool Oracle Database Upgrade Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\assistants\dbma\logs\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Buffer size for copying file is set to 2048
    Expanding source path D:\oracle\product\10.1.2b2b\assistants\dbma\logs\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\assistants\dbma\logs\*. Nothing will be copied.
    End Processing configuration tool Oracle Database Upgrade Assistant
    Start Processing configuration tool Oracle Database Configuration Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\..\admin\iasdb\bdump\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\..\admin\iasdb\bdump\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\..\admin\iasdb\bdump\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\..\admin\iasdb\cdump\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\..\admin\iasdb\cdump\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\..\admin\iasdb\cdump\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\..\admin\iasdb\udump\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\..\admin\iasdb\udump\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\..\admin\iasdb\udump\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\..\admin\iasdb\create\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\..\admin\iasdb\create\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\..\admin\iasdb\create\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\admin\iasdb\bdump\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\admin\iasdb\bdump\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\admin\iasdb\bdump\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\admin\iasdb\cdump\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\admin\iasdb\cdump\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\admin\iasdb\cdump\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\admin\iasdb\udump\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\admin\iasdb\udump\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\admin\iasdb\udump\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\admin\iasdb\create\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\admin\iasdb\create\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\admin\iasdb\create\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\rdbms\audit\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\rdbms\audit\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\rdbms\audit\*. Nothing will be copied.
    Preparing for copying D:\oracle\product\10.1.2b2b\assistants\dbca\logs\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\assistants\dbca\logs\*
    WARN: Could not find any file matching the expression D:\oracle\product\10.1.2b2b\assistants\dbca\logs\*. Nothing will be copied.
    End Processing configuration tool Oracle Database Configuration Assistant
    Start Processing configuration tool Internet Directory Configuration Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\ldap\log\oidca.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\ldap\log\oidca.log
    Adding the file D:\oracle\product\10.1.2b2b\ldap\log\oidca.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\ldap\log\oidca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    Preparing for copying D:\oracle\product\10.1.2b2b\ldap\log\dipca.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\ldap\log\dipca.log
    Adding the file D:\oracle\product\10.1.2b2b\ldap\log\dipca.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\ldap\log\dipca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    Preparing for copying D:\oracle\product\10.1.2b2b\ldap\log\dasca.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\ldap\log\dasca.log
    Adding the file D:\oracle\product\10.1.2b2b\ldap\log\dasca.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\ldap\log\dasca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Internet Directory Configuration Assistant
    Start Processing configuration tool Directory Integration Platform Configuration Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\ldap\log\odca.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\ldap\log\odca.log
    Adding the file D:\oracle\product\10.1.2b2b\ldap\log\odca.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\ldap\log\odca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Directory Integration Platform Configuration Assistant
    Start Processing configuration tool Infrastructure Schema Configuration Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\config\schemaload.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\config\schemaload.log
    Adding the file D:\oracle\product\10.1.2b2b\config\schemaload.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\config\schemaload.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Infrastructure Schema Configuration Assistant
    Start Processing configuration tool Ultra Search Security Configuration Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\assistants\opca\ultrasearchInst.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\assistants\opca\ultrasearchInst.log
    Adding the file D:\oracle\product\10.1.2b2b\assistants\opca\ultrasearchInst.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\assistants\opca\ultrasearchInst.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Ultra Search Security Configuration Assistant
    Start Processing configuration tool Delegated Administrative Service Configuration Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\ldap\log\oidca.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\ldap\log\oidca.log
    Adding the file D:\oracle\product\10.1.2b2b\ldap\log\oidca.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\ldap\log\oidca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Delegated Administrative Service Configuration Assistant
    Start Processing configuration tool Single Sign On Configuration Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\sso\log\ssoca.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\sso\log\ssoca.log
    Adding the file D:\oracle\product\10.1.2b2b\sso\log\ssoca.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\sso\log\ssoca.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Single Sign On Configuration Assistant
    Start Processing configuration tool Infrastructure modo_sso Configuration Assistant....
    Preparing for copying D:\oracle\product\10.1.2b2b\config\infratool_mod_osso.log to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\config\infratool_mod_osso.log
    Adding the file D:\oracle\product\10.1.2b2b\config\infratool_mod_osso.log from the file path expanding...
    WARN: Source file D:\oracle\product\10.1.2b2b\config\infratool_mod_osso.log could not be found. Nothing will be copied for this file
    Number of file(s) copied is 0
    Number of directories copied is 0
    End Processing configuration tool Infrastructure modo_sso Configuration Assistant
    Start Processing configuration tool OPMN Configuration Assistant-start OPMN....
    Preparing for copying D:\oracle\product\10.1.2b2b\opmn\logs\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\opmn\logs\*
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\B2B~B2BServer~b2btst.fitl0036.tamro.com~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\B2B~OC4J_B2B~default_island~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\dcm-daemon~dcm-daemon~dcm~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\HTTP_Server~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\ipm.log from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\OC4J~home~default_island~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\ons.log from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\service.log from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\states from the file path expanding...
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\B2B~B2BServer~b2btst.fitl0036.tamro.com~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\B2B~B2BServer~b2btst.fitl0036.tamro.com~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\B2B~OC4J_B2B~default_island~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\B2B~OC4J_B2B~default_island~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\dcm-daemon~dcm-daemon~dcm~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\dcm-daemon~dcm-daemon~dcm~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\HTTP_Server~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\HTTP_Server~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\ipm.log to D:\oracle\product\10.1.2b2b\cfgtoollogs\ipm.log
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\OC4J~home~default_island~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\OC4J~home~default_island~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\ons.log to D:\oracle\product\10.1.2b2b\cfgtoollogs\ons.log
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\service.log to D:\oracle\product\10.1.2b2b\cfgtoollogs\service.log
    Number of file(s) copied is 8
    Number of directories copied is 0
    End Processing configuration tool OPMN Configuration Assistant-start OPMN
    Start Processing configuration tool OPMN Configuration Assistant-start HTTP server....
    Preparing for copying D:\oracle\product\10.1.2b2b\opmn\logs\* to D:\oracle\product\10.1.2b2b\cfgtoollogs
    Expanding source path D:\oracle\product\10.1.2b2b\opmn\logs\*
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\B2B~B2BServer~b2btst.fitl0036.tamro.com~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\B2B~OC4J_B2B~default_island~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\dcm-daemon~dcm-daemon~dcm~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\HTTP_Server~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\ipm.log from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\OC4J~home~default_island~1 from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\ons.log from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\service.log from the file path expanding...
    Adding the file D:\oracle\product\10.1.2b2b\opmn\logs\states from the file path expanding...
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\B2B~B2BServer~b2btst.fitl0036.tamro.com~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\B2B~B2BServer~b2btst.fitl0036.tamro.com~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\B2B~OC4J_B2B~default_island~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\B2B~OC4J_B2B~default_island~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\dcm-daemon~dcm-daemon~dcm~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\dcm-daemon~dcm-daemon~dcm~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\HTTP_Server~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\HTTP_Server~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\ipm.log to D:\oracle\product\10.1.2b2b\cfgtoollogs\ipm.log
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\OC4J~home~default_island~1 to D:\oracle\product\10.1.2b2b\cfgtoollogs\OC4J~home~default_island~1
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\ons.log to D:\oracle\product\10.1.2b2b\cfgtoollogs\ons.log
    Completed copying file D:\oracle\product\10.1.2b2b\opmn\logs\service.log to D:\oracle\product\10.1.2b2b\cfgtoollogs\service.log
    Number of file(s) copied is 8

    Please raise a SR with support though it looks like installation configuration/env issue.
    Regards,
    Anuj

Maybe you are looking for

  • Flash Problems with Snow Leopard Mackbook Pro

    I am having trouble with Google Analytics and other websites that use hover states such as NewImageMedia.com's header. It seems the Hover Over stuff makes the Flash go crazy. When I say gow crazy I mean, it shoots the hover over stuff to the right at

  • Reader Toolbar not Working in Internet Explorer

    I can open a PDF file in IE or Firefox; however, none of the options on the toolbar work. For example, if I click on the disk icon to save a PDF, my cursor turns to a circle with a slash throught it. I tried removing Reader and reinstalling without l

  • HT1338 Hi How can i reinstall OS Mavericks to make my laptop run like the first time?

    Hi,How can i reinstall OS Mavericks to make my laptop run like the first time?

  • 'SAP NetWeaver 7.0 (2004s) - ABAP Trial Version'

    Hi Experts,                I would like to install 'SAP NetWeaver 7.0 (2004s) - ABAP Trial Version'  which is available at SDN downloads - in my laptop. how long can i use the same. Will it get expired after some time? Is there any option to use the

  • WEP password change to WPA2 on MBP w/Tiger

    I need to change the WEP password to WPA2 on my older MBP Titanium in order for it to recognize my network (which uses WPA2) using a new Airport Extreme. Right now I cannot connect to the web or printer or talk to my newer MBP. In system Preferences,