After Effects CC not working with OSX Mavericks 10.9.2

Hello.
Today I downloaded the trial version of After Effects CC and when I opened it I got this message.
I am really angry seeing that I need After Effects to do a project. Does anyone know what is going on?
Thanks
AngrySc0rpi0n

Did you check system requirements? What else is running? If you have enough ram, enough screen resolution, and enough free space on your drive AE should run.
Something may be conflicting with AE. Did you try a re-boot?

Similar Messages

SanDisk USB 3.0 Card Reader does not work with OSX Mavericks.

Since updating to OSX Mavericks (10.9) My USB 3.0 SanDisk "ImageMate All-in-One" Card Reader has begun to fail.
It all seems to work proper at first. The memory card shows up in finder and I'm able to browse the files. But when I try to transfer any files it un-mounts from finder and only transfers the first file.
This does not happen under previous OSX versions. I have tried on other computers since, so the card reader is fine.
My USB 2.0 card reader saved my life this time. It works totally fine.
Is this a known problem? Are you guys working on it?

Solved in this post here:
https://discussions.apple.com/message/24016337#24016337

Microsoft Office 2011 not working with OSX Mavericks

Hello,
I downloaded OSX Mavericks within the past two or three days, and I've been able to use Microsoft Word just fine. I tried opening PowerPoint today and it crashed, so I updated the Microsoft Office package. Now, I cannot open anything but Messenger.

Went through this exact problem two weeks ago.
Basically, when I installed I then updated and only Word would open correctly. After calling the help desk and going through a ton of suggestions we got it to work by doing update 14.1.0 and then opening Word and updating to 14.1.2. This fixed my problem and it hasn't repeated... and I use the whole office suite daily.
IIRC it was the 14.1.2 update after 14.1.0 that did it, however you can call Microsoft support... just make sure you have about 45 minutes available if you have to do some serious troubleshooting if the two updates don't fix it for you. Keep in mind this worked for me so YMMV.

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

I bought the production premium , cs6 , and I download it and registered with out any problem , I formatted my computer then I downloaded the collection , now everything else working only after effect is not working , what shall i do

did ae install without problem? check the install logs to be sure (Troubleshoot with install logs | CS5, CS5.5, CS6, CC)
if it did, what do you see when clicking the executable?

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?

I had a Tascam US 122 usb interface, but it didn't work with OSX Mavericks. What model would work with this? Would the US-144 mkii work with my system?
Thanks!

You didn't mention the kind of track in GB you are trying to create, but if you are connecting the keyboard with a guitar chord to the Tascam, you will need to set up a Real Instrument Track in GB to hear anything. If your keyboard has a midi out, use a midi cable to the midi input of the Tascam, create Software Instrument Track, and you will hear something. But with a guitar chord, it won't send the right signal to a Software Instrument Track. The headphone jack in the Tascam monitors the signal coming back to it out of GB (if you choose the US-122 as your monitor in GB's preferences), so you wouldn't hear your keyboard if the track is not set up correctly. It could be the drivers, but since you didn't mention the type of keyboard or the type of GB track, I thought that might be a possible answer as well.
eMac Mac OS X (10.3.8)

Hp scanner software Scan 3 does not work with osx yosemite

The older software called HP Scan 3 does not work with OSX 10.10. Where can I download an update for this software?

Hello @ringie,
Welcome to the HP forums.
I understand that you would like to scan from your Photosmart premium C410 to your Mac 10.10.
I would like to help.
There is currently no updated software.
Try the following work around.
Scanning in OS X v10.10 Yosemite without HP Software
Hope this helps get you scanning.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

After Effects freezes when working with footage which is just being rendered

After Effects freezes when working with footage which is just being rendered... this is a bug which was introduced with CS6 and I wonder if this is really so hard to fix. When you are working with footage from a 3d application which is just being rendered (in my case on a small farm via deadline) it has become impossible to work with After Effects. AE freezes for several minutes and only eventually returns to work. I suspect After Effects is reloading newly rendered frames in the background although I have disabled that in the preferences. With CS5 i can work on the frames already rendered without any problems. I filed a bug report about a year ago.
Greetings,
Daniel

If you don't have Service Pack 1 for Windows, you should get it. No guarantees, but it may help. For the moment, I'd just wait until the 3D renders are complete before importing... there isn't much else you can do at the moment, anyway.
There's only one application I've seen that can reliably, "works-every-time", read media files as they're recorded: Avid Newscutter...but then, it was created to do precisely that. AE wasn't.

Safari scrolling does not work in osx mavericks please solve this issue

safari scrolling does not work in osx mavericks please solve this issue

I know it is a limited topic, but could you provide a little more detail?

HT201364 will my OSX Snow Leopard 10.68 Apps work with OSX Mavericks

Will my apps from 10.68 work in OSX Mavericks. I have recording software, Motu Digital Performer 6, I cannot afford $200 to upgrade software. Are Most Snow Leopard Apps Compatble with Mavericks

Do you have any Power PC Apps on your Mac?
They will NOT run on Mavericks (or Lion, or ML)
in System Information (I think it was called System Profiler in SL),
Select Software->Applications and sort by Kind (see: https://tidbits.com/article/12156)
(If no PowerPC Apps, then best to test yourself (or ask in the "Motu Digital Performer" forums (if it exists)
If you have a Time Machine backup, you can easily revert back to a proir OS:
OS X Mavericks: Revert to a previous OS X version)

After Effects lights not working

I am working in After Effects CC. I added a light to my scene and it just turns all of my 3d layers black. I am a very seasoned AE user. I have worked with lights before. I don't know what is going on here. It's not a draft mode issue. And my lights are not behind my layers or anything like that. I have found other people in the online forums with this problem from over the years but never a solution. Ambient light is the only light that works. Spot, pin, and parallel turn everything black. Thoughts?

Once the problem presented itself I started fresh with a new project and very simple comp and still had the same problem.
So my settings are pretty straightforward.
I am using After Effects CC (not the 2014 version)
I have one 3d solid that I pushed back in z-space. It is set to receive lights.
I am using Classic 3d.
I created a new spot light.
The settings are as follows:
Intensity: 100%
Color: white
cone angle 90
cone feather 0
falloff smooth
radius 75
Falloff distance 24
Casts Shadows on
Shadow Darkness 20%
Shadow Diffusion 0
If I turn my light off you see my solid. If I turn it on you see only blackness.
If I add a 2d layer you can see it. Once I make it 3d, it turns black.
Thanks for any advice you have. I'm guessing I probably need to do a clean install or something because this is crazy. It's not like I've never used lights before. They just up and stopped working.

How can I update After Effects CS6 to work with Mavericks?

I bought CS6 in September and now I have updated to Mavericks on my Mac. It says it won't run on Mavericks? Is there a new download? I don't want to move to Creative Cloud, I just want to keep my purchased version.

Adobe After Effects CC and CS6 require updates to be compatible.
Download the latest build for After Effects CC (12.1) at http://adobe.ly/AE_CC_12dot1_details
...and After Effects CS6 (11.0.3) at http://adobe.ly/AE_CS6_1103

Does iPhoto 9.2.3 work with OSX Mavericks?

I've planned to download OSX Mavericks, but I've read some people's reviews and it says that Mavericks doesn't support iPhoto '11 (9.2.3) and I don't see any update for it on my computer... Isn't iPhoto usually a free thing to update? I don't understand.
I really want Mavericks so what should I do with the whole iPhoto situation?

Welcome to Apple Support Communities
iPhoto 9.2.3 is not compatible with OS X Mavericks. However, after upgrading to OS X Mavericks, you will be prompted to update to iPhoto 9.5, which is compatible with OS X Mavericks and it's free in your case. (You can't see iPhoto 9.5 as an update because it's only compatible with OS X Mavericks).
iPhoto 9.4.x also works with OS X Mavericks, but the Mac App Store prompts you to install the latest iPhoto version

OfficeJet Pro 8600 Plus Wireless DOES NOT WORK with Mac Mavericks Based Network

Replaced my Brother system with the HP OfficeJet Pro 8600 Plus yesterday. There are many positive features of the 8600 Plus that prompted me to purchase it...
Modular Design
Large legal sized Scanner
Standard/Legal Paper Printer
Copy
E Print Capability
High Yield / Affordable Toner Replacements
Unfortunately, I discovered the Wireless network capability is less than desirable. After hours of installing, reinstalling, work arounds, internet solution searches, it just will not work. If you are able to get the printer to work on your network (with router), the scanner will not be visible, vice versa, etc...etc...etc...
HOWEVER, I did discover this solution. If the unit is near your base computer, install it to your computer with a usb connection. That allows you to have scanning and printing from that unit. Then you can connect the unit through its ethernet connection to your router. From there all computers can print within your network. It's not the best way to connect a WIRELESS printer, but at least it works.
I'm not certain why HP and Apple can't find a solution, but I never found anything on the net that worked. The problem seems to stem from the new Mavericks update from Apple, but I'm really not sure. I wasted an entire day of productivity attempting to make it work. I'm posting this so you don't make the same mistake. If you happen to know a verified solution, then I would welcome the information. Best of luck!!!

It may be a mac driver issue. Try installing the bootcamp update for your version of vista from here:
http://www.apple.com/support/bootcamp/
I'm not sure if this is supposed to work since I've never tried mac hardware at 5ghz on windows before...

External DVD Drive not working with osx 10.8.5

Hi, I'm having issues with my MacBook Pro 15" 9,1 working with an external DVD drive. I am running OSX 10.8.5 and have been troubleshooting this issue for a few weeks. The optical drive itself is the original drive that came with the computer, but I have put it in an external enclosure to free up space inside the body of the MacBook Pro. The drive seems to function fine with CDs (playing and ripping - haven't tried burning yet) but is extremely inconsistent/barely functional with DVD playback. Only one DVD in my collection properly works - others bring up error messages in multiple programs (VLC, Wondershare, the native DVD application, etc.) and another continuously loops back to the main menu each time "Play Feature" is selected. These are a variety of DVDs that range from obscure to commercial and old to new (the oldest and most obscure is the only one that works). After deciding that it is not the programs, I replaced the enclosure. I still had the same exact issues. I reset PRAM - no solution there. I created a new user on my computer, installed the same media players and had the same luck. I then used the same external drive on my old MacBook Pro 15" (5,4 running OSX 10.6.8) to see if it would work there. It worked perfectly (with the native DVD application). What is going on here and how can I get my new computer to recognize the external DVDs reliably and consistently?

older superdrives were Hitachi mfg, new ones are Panasonic. Since yours is new and panasonic, indications are it wont work thru the enclosure on your NEW macbook, rather as you state on your older Mac.
until you said it worked fine on the old machine, the logical conclusion is a dirty lens on the laser since it reads CDs fine but most DVD not, since the track is much smaller.
Considering a new superdrive is only $48 on ebay ,or $78 for a new superdrive, your frustration might be too much, and just grab a new superdrive.
Your detailed information indicates a firmware incompatibility of the panasonic superdrive thru an enclosure
This is the new superdrive, made by panasonic as you have in your enclosure:
http://www.ebay.com/itm/like/221280580133?lpid=82
of course thats a lot of trouble buying that AND an enclosure, easier still is just getting a Mac superdrive inside its working enclosure designed for use as such:
http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive

Screensaver not working since OSX Mavericks

My screensavers are not functioning correctly since upgrading to OSX Mavericks. I've switched screensavers and the times and they show they are functioning in the System Preferneces Menu. Also, if activate a hot corner where I have screensavers set it works fine. My power settings work fine as well and my system goes to sleep after an hour which is what I have it set at. Are there any fixes for the screensavers?

I think I've finally fixed this problem. I tried changing the delay time, I tried re-choosing the designated folder, and I even tried re-installing Mavericks and none of it solved the issue.
As a last resort I tried deleting the folder I keep my photos in for the screen saver and created a new one and it appears to working fine now (touch wood).

After Effects CC not working with OSX Mavericks 10.9.2

Similar Messages

Maybe you are looking for