After Effects Changes my Clips FPS from 29.97 to 25? Help :)

Hey guys,
I am trying to edit a video and when ever i import clips that are 29.97, (check other programs and they state they are also 29.97 fps), after effects changes the 29.97fps clips in 25fps clip, i am clue less as to what to do and is rather
frustration. Please help.
Kind regards,
Eggy

After Effects hasn't changed anything. You just need to tell After Effects how to interpret the footage:
http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7f86 a.html#WS3878526689cb91655866c1103906c6dea-7f82a
Start here to learn After Effects:
http://adobe.ly/AE_basics

Similar Messages

After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1

I have this on both machines running 10.10.1 OS X and AE 2014. I see on line that others are having this issue. I think it needs a Patch ASAP.

Hello. Basically I can create a new comp that is set to 1920 x 1080, @ 30 frames per second for 1 minute TRT. I create a new solid layer, say red. I hit space bar or play on the screen, and it does not play in real time. ITs on my Imac as well. same OS and Same Version software.
After effects running prerendered @ 17 FPS and fluctuating up to 20 when it should be playing @ real time. After effects 2014 CC , brand new Mac pro strapped 10.10.1
created by Dave LaRonde in After Effects - View the full discussion
Well, before you hit the panic button, why don't you tell us precisely what you're doing when AE plays at 17fps -- the keys you hit, the buttons you click to begin play.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7102588#7102588 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7102588#7102588
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in After Effects by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.
Geoffrey M. Wetzel
[email protected]
[email protected]
302.353.0798

Whenever i try to open my after effect it just says error 15 n dont work plzz help me out

whenever i try to open my after effect it just says error 15 n dont work plzz help me out

We cannot know. you are not telling us anything about your system, what kind of project, what footage etc. We don't even know what version of AE!!! In any case, run the Creative Suite Cleaner Tool, reinstall the program. If the issues persist, we realyl need a lot more info to help you.
Mylenium

Hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me :)

hey i have a iphone 4s 64gb but and using the internet share .. how can i change the nat type from strict to open please help me

You will have to configure that with your router. Type your router's IP address in the search/domain bar and allow port forwarding.
What is requiring you to have an open NAT? That issue is usually for gaming consoles, etc.

After Effects CC 2014 problem: Image from frame from the last Premiere CC-After Effects link permanently burned into new project compositions.

One frame from one of the clips I sent from Premiere to After Effects through "replace with After Effects composition" was permanently burned in After Effects and now it appears in every new composition of every new project I create as the background of such composition.
For example, I sent from Premiere a clip of a building to After Effects for color correction with Finesse, and warp stabilization and then after rendering, finishing, and closing all the applications, now, every time I open After Effects for any other project, whether already-created or brand-new, every existing or newly created composition (in a Mac Command N) you see the image of the building as the background of the composition. If you create a new composition, while it remains empty of any layers, you see the image of the building. If you have an already-created composition with layers, when you turn off all the eyes of the layers, you would expect to see black (nothing) in the composition window (if that's the color you assigned to be as the background of the comp), but instead you see the building. If you change the color of the comp's background in Composition Settings, you still see the building as the background. If you render such empty composition (no layers) you render out the image of the building, not black. I tried clicking everywhere and going through the preferences, and even uninstalling the application and re-installing it, but it seems to be permanently burned in into every comp's background.
Please, any ideas of what's going on and how to get rid of it?
Thanks so much for your help,
RR.

Thanks so much Dave. It fixed the problem.
Raoul.

After Effects Direct Link clips render slowly in Premiere

I have a few clips I sent to After Effects from PPro via Direct Link and have noticed Premiere chugs along at a super sluggish pace when it gets to rendering or exporting those clips. Some clips take at least 5 times longer to render or export from Premiere than it does in After Effects which doesn't make sense to me. I have noticed in AE when I'm exporting my RAM is being utilized a lot but in PPro my CPU is maxing itself out while not using as much RAM – is there a way I can have PPro render utilizing the same system resources as AE?
Direct Link is awesome in theory but right now I see two big problems with it:
1) PPro takes forever to render Direct Linked clips so you might as well just export from AE and bring the clips into PPro
2) I've read that when exporting from PPro, in order to get the highest quality export, it's best to not use render files which means even if you've rendered your Direct Linked in PPro in order to guarantee smooth playback you'll have to re-render them on export (please correct me if I'm wrong)
Both of these issues makes me wonder what use Direct Link is other than a quick way to send clips to AE? Please help! I wan't this feature to be as awesome as it should be.

Well that's a shame... If exporting from AE is required there should be a better method of getting the exported clip into PPro to replace the Dynamic Link clip. I was hoping I could point the comp in AE to use the lossless export as a proxy and therefore have PPro read the exported file rather than the AE comp but, unfortunately, that still produces stuttering playback.
Fuzzy Barsik wrote:
PrPro communicates with dynamically linked compositions via headless instance of AE, which limits processing to a single thread and, therefore, creates a bottleneck.
I had high hopes for Dynamic Link, this is a sad revelation. Hopefully this is an issue Adobe is working to fix.

After Effects Rendering stops is away from PC

Hello,
I'm having a lot of troubles with a relative simple project, I have five h.264 1080p 5d MKii files i've mounted on premiere timeline 1280*720 25p (totally 4 minutes) after that i've sent to After Effects via dynamic link, and done some simple lumakeying, i realized a fake studio with white background and a 3d logo (VC Element 3d) that stands near the actor, after i added dome simple camera movement and basic color correction.
Now im experiencing tremendous rendering time trough Adobe Premiere Pro 6-28 hours (for only 4 minutes of video), at the end the file is corrupted. After effects preview fawless, scrolling mouse at full resolution is very fast almost realtime.
Now i am experiencing extremely long time also with queue rendering. I've noticed that AE renders only if i'm moving the mouse if i stop moving rendering goes on "pause", with gpu and cpu at 100%.
I have an Asus G750JX 4700hq 3.4ghz (on TURBOBOST) 32gb RAM (1600mhz Corsair CL9), gtx770m (3gb DDR5 VRAM), 2 SSD one for OS another for AE Caching, External USB3 7200RPM (160mbps) for footage. AE and Premiere CC, W8.1.
I've tried to transcode source h.264 files to Animation, but nothing changes.
Also on premiere if i keep moving the mouse (with a simple application) it renders in 20 Minutes but the file at the end is corrupted.
I've also tried to disalble, enable Multicore Rendering, CUDA Engime, clean cache.
I've never had this kind of problem.

After 48 hours of headache, i found the problem, my sistem was infected by a Trojan that uses th GPU when IDLE for mining... so no problem when working on timeline but low performance when i was away from pc... i removed the virus, killing the proces: sistemewhileidle.exe and clean the users/temp folder where the virus was stored after i searched for entries in the system reg and delete.

After Effects and Rotoscoping causes fps loss in info panel

Hello,
I am pretty new to after effects, so please take it easy on me if this is an easily fixed issue or if I am doing something wrong. Here is my whole process.
I have a canon xl2, shooting in 24p with 2:3 selected. I then import the video from the camera to premiere using capture. This was filmed at 16:9.
In PP I open a new project, I use DV - 24p Widescreen 48khz. I have the time code set to auto detect in capture.
I then import the captured video to after effects. I am trying to get better at rotoscope brush, so this is where the problem is.
I import the file, drag the source to the new composition icon, then double click the layer in the composition. I select rotobrush and brush the object.
I then select play, which will go thru and play the file, adjusting the rotobrush. As I view the file, my info panel is up and it begins by showing 23.976 (realtime). The preview panel is showing 23.98 fps.
After a few seconds, the rotoscoping fails and the info panel shows my actual fps vs the file fps. SO in red it shows something like 7.005/23.976 NOT realtime.
I've tried to do some research on this, and I am not sure if everything is set up right. I have read that its best to work on noninterlaced video in AE, i believe it is seperating. In interpret footage it is showing under fields and pulldowns area: lower field first and then it is removing pulldown with WWSSW. Showing a effective framerate of 23.976. Under frame rate area i have selected [conform to frame rate] and 29.97 is in the window. Under pixel aspect i have widescreen 1.21.
I know this is a huge wall of text, but I'd rather swamp you with info then not have enough. Any ideas on what I am doing wrong? Why the fps drops out so much on the rotoscope? Also note, I am only losing fps after pressing play to have rotoscope find the edges itself.
Thank you for any help on this matter.
further info:
Running window 7 pro - 64 bit, adobe CS5 production premium. At the moment its the trial version - get my copy in the mail tommorrow.
PC is i7 920 oc'd to 3.6, 6 gigs ram, 7200 rpm HD with 64Mb cache, gtx480 with 1500Mb Vram. Using the latest Nvidia drivers.
I believe I am using OpenGL for rendering, but not positive.

Ok, awesome. Thanks a ton for taking the time to explain it to me and make sure that I understand the proper way to reference it.
With all this considered, is there any reason why someone would do the traditional rotoscoping vs using the rotobrush to create a matte?
To me it seems like the roto brush pretty much replaces traditional rotoscoping. If thats the case, wouldn't it almost be considered a new rotoscoping method.
Like in the past, people used to dig holes with shovels and by hand. Excavating holes this way was hard and took alot of time.
Over the years, technology made it possible to use a backhoe to dig holes, making it super easy. Both methods are excavating, one is just using an easier method.
I guess thats where my confusion came in, I guess the way I look at it, due to never having done the traditional rotoscoping method, I just considered it the same thing.
Anyway, I hope I dont look like a giant *** with my posts. Cuz anyone willing to take time outta there day to help someone else in a courteous manner deserves all the praise I can give.
Thanks again.

After effect changes font on my computer

Hi,
I'm fairly new to after effects, I work with a team with different computers. We're making a kinetic typography but somehow on my computer the font completly changes. They change positions but the coords are still the same, all the letters are suppose to be capitalized but they aren't in my after effects. The file is exactly the same. On every other computers it works except mine.
I'm using the new macbook pro retina 15" with mountain lion and have creative cloud with AE CS6
How it should look
how it does look.
both computers run CS6, font is freeroad (available on dafont).
I've been in contact with adobe help for 3 hours but they couldn't help me any further, and I'm at an loss. Anybody any ideas?

I figured it out, the font i downloaded from dafont was a different one from the ones my team used. Same name so no error. I got the ttf file from the computer of which did render it properly, and now it does work properly. Font size, scale, position, spacing everything was the exactly the same.

Night vision in After Effects?/ Transferring a style from PS to AE??

Hi,
I am just starting out using adobe software, Im currently doing a job for which I need a style/mask to make a video clip look like it was shot in night vision.
Is there any way I can do that in AE?
I have done it in photoshop so I have been trying to save it as a style and transfer it to AE but I'm not having any luck!
Can anyone shine a light on this for me?
Cheers
Tim

A Night Vision animation preset comes with After Effects.
Type 'night vision' into the search field in the Effects & Presets panel in After Effects.
For more information about animation presets, see the
"Animation presets" section of After Effects Help.

The extrude effect on my text goes away when brought from After Effects to Premiere since I updated to 2014 CC. Help?

Hey everyone,
Ever since I have updated from my CC to the CC 2014 last night, My extruded 3D ray traced texts become CLASSIC 3D texts when brought to Premiere from After Effects. Has anyone else experienced this problem yet or have any possible solutions? I appreciate it, Thanks!

Hey everyone,
Ever since I have updated from my CC to the CC 2014 last night, My extruded 3D ray traced texts become CLASSIC 3D texts when brought to Premiere from After Effects. Has anyone else experienced this problem yet or have any possible solutions? I appreciate it, Thanks!

What versions of After Effects can open project files from which versions?

Since this question comes up a lot, I just created this article that gives the details for all of the versions going back to After Effects 7.0:
"opening After Effects projects from previous versions and saving back to previous versions"

Please look at the Oracle Text reference manual for a list. Ultra Search uses the INSO filters of the underlying Text engine.
--Stefan Buchta

After Effects Project - Erased...from existence?!

Just thought I'd mention this in case anybody has a suggestion.
Yesterday I spent about 12 hours on a motion graphics project for a client - like I always do. Nothing particularly unusual about the job, except I had started work on it at the client's premises, and simply copied the project onto my desktop at home for yesterday's work. I wouldn't normally have a project on the desktop.
To maintain compatibility with the client I used CS3, 8.0.2.27. OS is Mac OS 10.5.8.
Like I say, 12 hours work, with an auto-save every 10 minutes. 2 incremental saves of my own, so there should be several project files in the job folder.
Rendered with Nucleo Pro, then copied complete job folder back to my laptop for transport to client today. Erased nothing on either machine.
At the client today, am confused to find the only project files and/or autosaves are the original Friday version - dated friday, despite the Render files being there from yesterday. So I check in at home and discover the same thing here. The render files of the final job exist, but not the project files.
Nucleo caches the project files it renders - but they're not there either, despite earlier job renders still being in the cache.
Apple's Time Machine will only show me backups from 9AM yesterday - before I started work on this job. It seems to have no backups in between, despite the fact that it is supposed to keep backups of every hour for previous 24 hours.
After Effects has the projects in it's "recent projects" list. Nucleo has them in it's render history. But the project files do not exist.
What the hell is going on? Anyone ever experienced similar? Got any ideas where a secret cache of my project might be?

Have you checked your account for guest users or the default template for new users? Perhaps you never saved it in the right user home dir to begin with?
Mylenium

After effects color corrected clip not showing correctly in Premiere

Hello all,
I have recently made a short film with a few effects in Premiere and After effects CS4. I have used the Dynamic Link to accomplish this. I have added color correction with Color Finesse in After effects. The problem is I some of the color correction is not showing up in Premiere once it has finished. Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well. I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
Is anyone else haveing this problem?
Do you think it's something wrong that an update will fix?
Maybe a new codec?

Describe the exect DL steps you took.

After Effects change size of the Movie after rendering mp4

Hi,
I created a new composition and wanted to render it as an mp4 file. The composition has a size of 1500px x 1000px, after rendering, the mp4 file has a size of 750px x 576px - everthing is distorted. I don't know what happened, because everything was prechecked because the size matters.
Is someone know what happend and what I can do, to prevent such a mistake? (it is my first After Effects project ever - I'm a nube)
Thank you Dan

mp4 is a compression format based on specific blocks of pixels and the legal sizes are set by the codec, there is nothing you can do except pick another codec if you must have 1500 X 1000 as a final size. Why did you pick that size? If you must deliver an mp4 then you should be working with standard sizes for your compositions and they should be square pixels... Always square pixels for mp4.

After Effects Changes my Clips FPS from 29.97 to 25? Help :)

Similar Messages

Maybe you are looking for