After Effects CS4 AVCHD Render Problem (Film ruckelt)

Hallo,
ich konnter vor 1 Woche ohne Probleme avchd Dateien importieren und normal rendern. Leider habe ich plötzlich Probleme.
Egal welche Einstellung ich vornehme ruckelt das Video jede Sekunde.
Kann mir jemand helfen?
Danke

Paar mehr Infos währen nett.
Genauere Fehlerbeschreibung. Wie gehst du vor.
Auflösung?
Framerate?
Progrssives oder Interlacetes Material?
Was dir halt alles so einfällt damit es uns leichter fällt zu Antworten.
Gruß
Christoph

Similar Messages

After Effect cs4 cannot render jpg on network on mac but render locally okay

After Effect cs4 cannot render jpg on network on mac but render locally okay
We use intel mac pro as workstation, and our servers are windows 2003 servers.
After Effect cs4 H264 render on network without any problem bud jpeg not.
Thank You
Ayhan.

Perhaps you must just enable the Allow Encoding using Legacy CoDecs option in the Quicktime control panel on the network machine or else some of that may not show up. Of course make sure QT is installed correctly in teh first place, as Todd and Rick said. On a server, you may need to set special group policies for that to work, also.
Mylenium

Adobe After Effects CS4 post render errors.

I am currently working on Adobe After Effects CS4.
I created a video on Adobe Premiere Pro CS4 mixing 2 sound tracks and a video track + another transparent video track with a logo. I've checked the project many times on Premiere Pro, and it seemed excellent. Then I imported the Premiere Pro Project to After Effects CS4 and checked the sequence again in ae cs4 to confirm it before rendering. After checking the video, I started rendering it.
All went ok.
But after rendering the video I got a huge problem. The video works excellent up to 20mins and suddenly the primary video became green colour, but the sounds and the video track where I set the transparent video, still works fine. The primary video was green colour till the end.
This is a serious problem! Can anyone help me to fix it!! Its Urgent!!

My system properties are as follows.
Processor - Intel Dual Core
Ram - 4GB
O/S - MS Windows 7 Professional 32bit
Video render settings,
Format - H.264
Frame Rate - 25
Profile - High
Level. - 4.0
Output. - 1280X720

Adobe After Effects CS4 trial installation problem, Please Help!

Ok, I downloaded the trail version of Adobe After Effects CS4 onto my PC (Windows XP). When I try to run the setup (by double-clicking it), a window pops up saying 'Adobe setup has encountered a problem and needs to close.' Does anyone know why this is, and how I might be able to fix it? I already tried re-downloading it, and I checked the system requirements. I WOULD REALLY APPRECIATE ANY HELP YOU CAN GIVE ME BECAUSE I REALLY WANT TO USE THIS! If it will help here are my PC's specs:
Operating System - Windows XP with service pack 3
RAM - 2.0GB
Graphics Card - ATI Radeon HD 4830
Processor - Intel Core 2 Dual 2.2GHz
Monitor Resolution - 1280x1024
Thanks

Verify the following:
a) you run as administrator
b) your virus scanner and firewall don't interfere
c) you have enough temporary disk space
d) no other tools are interfering
For b), simply turn those tools off during install. For c), check your user temp directory (C:\Documents and Settings\You\Local Settings\Temp). Clean it out either manually or using tools like CCleaner. Also defragment your drive. For d), you may need to uninstall otehr Adobe software. also monitor your task manager for processes and services that may have a negative impact. A dump of those can easily be generated using HijackThis!, so you can post the list here for verification, if needed. also provide any otehr info that could be important, like e.g. special drivers or user settings.
Mylenium

After effects cs4 moving layers problems

in cs4 when i try to move a layer arround, i get a huge X going through the layer and i cant see the actual object i am moving in real time. when i stop moving the object in the layer re-appears. i've tryed to reinstall after effects but still the same problem occures. i didn't have the problem when i first installed after effects. Can anyone help me fix the problem.
i'm running a hp laptop i3 with 3gb ram and ati graphics card.
Thanks in advance

http://forums.adobe.com/thread/737571?tstart=0
Mylenium

After Effect cs4 export and render issue

When I tried to render or export a video, After Effect(CS4)
become no respond and close,after that, my computer shut down too!
My computer:
Althon 64X 4600+
2GB DDR2 Ram
ATI HD5870 (500mb video Ram)
Windows 7 32 bit
Can anybody can slove this problem for me?

Mylenium asked very pertinent questions. I'll make some educated guesses, which may or may not apply.
First thing: 2 GB may seem like a ton of memory to you, but in AE-Land, it's NOTHING. You need to trick that machine of yours out with memory. On a 32-bit system, that would mean bringing it up to 4 GB.
If you're trying to use multiprocessing, turn it off and leave it off. On a 32-bit system, you'll never have enough memory to make multiprocessing work efficiently.
Trying to speed rendering by using Open GL acceleration? Turn that off, too.
Since you're on a 32-bit system, the most recent version of AE you can run is Version 9. Make sure it's fully updated.
But if you shot video on a DSLR, HDV Camera, XDCam or Flip Cam, you could still have problems. Since you can't be running AE 10, which pretty much solved the problem of long-gop footage, here's why:
Dave's Stock Answer #1:
If the footage you imported into AE is any kind of the following -- footage in an HDV acquisition codec, MPEG1, MPEG2, AVCHD, mp4, mts, m2t, H.261 or H.264 -- you need to convert it to a different codec.
These kinds of footage use temporal, or interframe compression. They have keyframes at regular intervals, containing complete frame information. However, the frames in between do NOT have complete information. Interframe codecs toss out duplicated information.
In order to maintain peak rendering efficiency, AE needs complete information for each and every frame. But because these kinds of footage contain only partial information, AE freaks out, resulting in a wide variety of problems.
I'm a Mac guy, so I like to convert to Quicktime movies in the Animation or PNG codecs; both are lossless. I'll use Apple's Compressor, Adobe Media Encoder or Quicktime Pro to do it.

After Effects CS4 error during render

The error appearing is as follows...
After Effects: AEGP Plugin Media IO Plugin:
Unknown Error!
MediaIO2 error: 0x4
Not enough memory to complete this encoding
( 5027 :: 12 )
Now, my computer memory is very poor (1.98 GB RAM), however, I do not believe this is the issue as I have tried rendering the exact same file on my other computer with 8.00 GB RAM, but the same error occurs.
I am completely baffled with why this error may be occuring, I have tried many ways to try and stop this. Such as...
Changed the "RAM to leave for other Applications" to 0.25 GB
Enabled Multiprocessing
Enabled Disk Cashe and to a size of 10,000 GB
Installed the latest update of After Effects CS4
Tried changing After Effects CS4's priority and affinity using Task Manager
Tried rendering with only After Effects opened with all other applications closed
Rendering with different output modules rather ".wmv", such as ".avi" etc.
Changed the video size from 856x480 to 428x240 etc.
I have tried rendering different sections of the video to avoid the parts where it has previously failed to render, however, it is continuing to crash and fail regardless of the section
The project I am rendering is rather large (4 Minute File), consisting of atleast 1 GB worth of imported video (.wmv) and images (.png) etc. However, before today, rendering was never problem and my renders would always run smoothly without crashing, so i'm completely unsure on what the possible change is and what could resolve the issue.
Thank you, all help is appreciated!

Any Windows Updates recently? Installed some CoDec pack or alternate media player software? If so, get rid of CoDec packs and reinstall Windows Media Player using the standalone package downloadable from Microsoft...
Mylenium

Severe audio problems in After Effects CS4 and MXF and more...

Hi!
I've been experiencing a lot of problems lately with several CS4 products.
First, and the worst, is that there seems to be some severe audio bug in After Effects when handling mxf-files. I pre-cut a project in premiere CS4, shot with a Sony EX1, and then imported the project in After Effects CS4.
In premiere everything worked fine and I had all the audio. In AE however the audio matched with the MXF-files disappeared (Yes I had the import audio box checked). All other audio worked fine from the music tracks and so on, but the MXF-files (MXF for NLE) was completely blank, the waveforms were completely flat. I checked every option there is in AE regarding audio and tried enabling and disabling XMP ID's and so on. After a lot of tweaking and testing I understood that the problem was not with any settings anywhere, the MXF-files lacked audio even if I started a new project and just imported the MXF-file.
The problem seems to be connected to when importing from Premiere. My colleague was editing a similar project on his computer in After Effects without problems, and he started out fresh in AE (didn't pre-cut in premiere). However, we tried to move my project to his computer, to see if the problem was connected with incompability with my hardware or such, and he got the same problem as me when he opened the project. Waveforms on MXF-files were completely flat. Certain confirmation that the problem was not connected with my computer appeared when he later reopened his own project, that had worked fine before, and audio was now completely gone - waveforms flat. An hour later, by chance, his audio suddenly popped back.
I have experienced this problems in two different projects in different forms (but both pre-cut in premiere). In the first, audio disappeared while previewing but was there when I ctrl-scrolled and rendered (no I hadn't muted audio in the preview panel). In the second, audio was completely gone even when rendered.
In both cases I tried saving and restarting the computer, reimporting from premiere, starting a fresh after effects project and only importing the mxf-files, changing the project settings, fps fixed to the correct instead of auto, changing output audio mapping, changing XMP, and so on in every possible way and combination I could imagine.
At my company our suspicion is that After Effects flags mfx-files imported from Premiere in some wierd way, to strengthen and ensure compatibility between the two - regarding different audio tracks, settings and effects from premiere (and this is almost what you could suspect that the XMP ID is for, but as explained with or without doesn't change a thing regarding this). We have no problem with the pure MXF support for AE, as MXF-files work just fine in After Effects if you import them directly and have not imported them through premiere earlier (but after a file has been "flagged" you seem to be sc***ed)
Anyone else experiencing this? Or am I missing something huge?
As additional notes, the dynamic link function seems extremely buggy and both premiere both sometimes complains about "dynamic link already in use and only one connection blah blah" even though only one link is used, and even though you restart the projects, programs, computer, whatever.
In furher addition Adobe Media Encoder (which also seems to be using some sort of dynamic link offspring) is super-buggy and most codec formats either doesn't start to render or just renders partially and then the program hangs. The problem have a connection with a process named pproheadless.exe eating upp all the RAM (4gbs).
(My workstation has been working smoothly for one and a half years and I have had very little problems with CS3 and "just" AE CS4. I am cautious of updates, don't have spyware and use Quicktime 7.5 as 7.5.5 is superbuggy and people seems to have problems with 7.6 and it doesn't fix the gamma issues anyway.)
Sorry if this was a long post but the problem is compl

Dude, that's what these forums are all about. Everyone in here says they dont work for Adobe, but they all act like apologists for what is clearly a disaster of a software release. My complaints aren't as specialized as yours, just very basic, and I wont go into all of them, because the list is long, and includes nearly every program in CS4.
I'm going for a refund, either from the retailer or my credit card company. Releasing software like this is dishonest.

Problem installing trial version of After Effects CS4

Hi,
I'm trying to install the trial version of After Effects CS4 on Windows Vista Ultimate Service Pack 1 32-bit Operating System, Processor 2.4GHz, RAM 4GB.
At the initializing stage it gets to 90% on the 'Checking System Profile...' dialog box, something flashes and then it freezes.
I've downloaded it a second time in case of corruption.
I've rebooted several times and retried it with no other applications running.
I've run updates on any existing adobe products I have.
Any ideas? I've never had problems installing adobe products before.
Thanks.

Not your fault, known issue.
a) Download the Microsoft Installer Cleanup Utility and install it
b) Download the CS4 Cleanup Utility from Adobe's support pages
c) Run the CS4 Cleanup, electing to remove all debris from your failed install
d) Manually uninstall all instances of Adobe AIR products (Acrobat.com, Adobe Media Palyer) using Add or Remove Programs
e) Launch the Microsoft Installer Cleanup and look for instances of Adobe Installer 2.0. Have them removed. Optionally, have it remove other Adobe stuff that may have been left over from CS4.
f) Try to install CS4
Note: The cleanup utilities will not remove anything physically, only clean out the installer, so they pose no danger to your system. You will only lose the ability to uninstall those programs from Add or Remove Programs.
Mylenium

I have a big problem at the installation of after effects CS4 ! NEED HELP

HEY all i need help I want to install AFTER EFFECT cs4 and i do all AV hijack and usb fix scan nothing fond >>NEED HELP
ERROR CODE:
Adobe Dynamiclink Support
Erreur:
Error 2.
Adobe Dynamiclink Support
Erreur:
Error 1605. Cette action n’est valide que pour les produits actuellement installés.
THANKS

I know the problem is i have an old AE cs4 and i don t uninstall correctly but i have another problem with twixtor effect i register my twixtor but i have the orange CROSS on my video --' and THIRD PARTY installer won't install my new effect "say uninstall and install correctly with serial number ..."
i have CORE2 DUO E6320 GTS8600XFX 2GO RAM DDR2 ASUS MOTHERBOARD (bad) WINDOWS 7 32BIT ULTIMATE for the DYNAMIC links probleme i use ccleaner REGEDIT and cs4 cleaner tools .

[Help] After Effects CS4 Sound Problem (Mac)

Hey, everyone.
First post so I hope nobody is gunna rage at me for being a noob.
I have After Effects CS4 on Mac 10.5.8 and until recently it was running great, but then i started to get this problem where my sound was all high pitched and chipmunk like. How can i fix this and get the sound back to normal? (By the way the sound is still the same speed as before, just it sounds like its got chipmunk setting on or something)
Many thanks to anyone who could help.
Zen

Check the Quicktime system panel. If anything there is whacked, you would notice it by odd values, e.g. a wrong default sample rate. The rest I can't help you with - only you know what tools you use on your system. Also, which we have overlooked at this point, make actualyl sure the output speakers are okay. For external speakers, something simple like a loose plug can considerably influence audio quality.
Mylenium

After Effects CS4 Performance (BRUTAL)

Despite the comments on this board (from Adobe themselves) claiming improved After Effects CS4 performance over its predecessor, my experience is the exact opposite. This version seems half baked to me.
AE CS4 isn't just SLOW, and by slow I really mean dreadfully unusable, It's unstable as well. Even running the same template files that came with CS3 and 4, there's a huge difference in render time, ram previews etc. When you can't even rotate a simple cube without crashing, there's some real problems, and this is just the beginning. The previous version had no show stopping issues, it performed like a trooper. This latest however, I can't see how I could use it day to day for anything..
There is no other software on this machine other than, CS4, Firefox, and Lightwave 9.5, which by the way, handles textured objects with hundreds of thousands of polys, not 6. I first get an error message that reads as followed;
After effect error: crash occurred while invoking effect plug-in "Live Photoshop 3D"
followed by, After Effects can't continue: sorry, After Effects has crashed. See... blah blah blah..
By the way this occurs with or without OpenGl enabled.
Systems specs
8GB Ram
Q6600
Hard Drive space 4TB, install drive, 156 GB free
Vista Business 64
Nvidia GeForce 8600 GTS (driver 178.13)
This is the same machine that ran CS3 very well, so there shouldn't be anything wrong with this rig..

Fausto,
I have no problem importing or animating your PSD - no crashes, at least. The resolution is very high. I got better results by cutting the resolution of your PSD in half, which may or may not be an option for you. I improved responsiveness a little by setting the PS 3D layer to "Use Photoshop Transform" in AE.
But ultimately, the responsiveness of the 3D layer in AE is impossible to work with, except with Live Update disabled. It seems like a RAM issue to me. What size are the texture layers on each side of the cube? If they're all 3000x2000-ish like your document, and you're working at full res, consider that AE has to hold all six images in RAM, plus manipulate them in 3D.
My own sense is that the whole 3D layer thing simply isn't ready for that kind of resolution in AE yet. And probably wont be until true 64bit code allows the storage of all those textures in RAM more easily.
As a side note, don't know if it's my location or your server, but your 74Mb image took me almost 2 hours to download.

After Effects CS4 & Wacom Showstopper bug.

Hi! For more than one year I've being feeling that my machine was the slowest machine on Earth, so I spent a good deal of money on a new HP Z800 with a Quadro FX 5800 and 24GB of RAM with windows 7 64 and a set of SSD raid that gives me over 700MB per second, after install After Effects CS4 and try it, was awesome, such a good response and super fast, but.... after finish installing all the rest, AE was slow like on my previous 4 years old machine..... so something was wrong. To make the story short, was the Wacom driver, if I turn it off, all goes back to normal, turn it on and all goes slow, so far I was able to reproduce it on 7 machines, Win XP, Win XP 64, Vista 64, and Win 7 64, the all show the same problem, and all the machines are different. And the problem can be reproduced very easily. I've made a video showing how to reproduce it. This problem render the Wacom with AE as a non viable option for anyone. I've noticed this since about 12 months ago, but never thought is was a hardware / driver problem. Just thought AE was excruciatingly slow.
Here is the video
http://www.youtube.com/watch?v=6KwzASwrnC0
Hope Adobe and Wacon recognize this problem and fix it as fast as possible,

Hello,
I'm using the trial of CS6 Production Premium, and After Effects CS6 has a terrible problem with the Wacom. After a video preview with audio or even just an audio preview, the Wacom will become very slow, almost like the computer is under insane processor load, but my CPU monitors don't seem to be doing much. I have a 24-core Dual-Xeon PC with 48GB memory and I am trying to make use of the multi-processor capability (it would be criminal if I couldn't use it).
The Wacom becomes slow with AFX and occasionally unresponsive. It makes it impossbile to work with AFX. I refuse to use a mouse, so that's out of the question. Also, this software should work with a Wacom like everything else does. I don't have this issue in any other program.
I've set AFX to use either 20 or 16 processors with .75GB memory per core. Seems this should work ok but the Wacom is being pummeled into submission, and that's a really bad problem if I can't even move my cursor. Makes me want to close down AFX ASAP, so I hope to find a fix.
I am using the latest Wacom driver and the trial for this software is only days old, so this problems should have been fixed by now according to this thread. I'm not too motivated to spend $1800 for this suite if I can't even use AFX with a Wacom, which is the main reason I'm after the Production Suite.
If I can't get this working I will probably just buy Vegas, even though Vegas is a big old crash monkey. No Wacom problems at all though.
Any ideas?
Also, anyone notice funny cursor behavior when typing in this forum? It seems to jump around on its own and this doesn't happen to me anywhere else. Could be a residual effect of the Wacom weirdness. This fields don't seem to like 'Shift+Enter' either.
Thanks,
Dan

Dynamic Link for Premiere and After Effects CS4 with Titles

I've created a Rolling Title in Premiere Pro CS4. I'd like to create a Dynamic Link to bring the title into After Effects CS4 to add effects that will show up in Premiere. I've watched a few video tutorials on Dynamic Link and read the documentation and tried a variety of permutations but can't seem to get this done.
Also saw something in these forums about problems using Dynamic Link with Titles (as opposed to regular clip??)
And something about Premiere and After Effects projects being saved together ??in same folder - is that correct?
So, could someone explain if this can be done and the right way to do it?
Thanks

Thanks Mylenium - appreciate the quick and focused reply.
I would like to keep the benefits of the Premiere Pro Titler (to play with the length of time by stretching or squashing the Title block on the timeline; to type in time to stay on screen at end; ease in and out etc . . .). If I do render out a png / tiff / or psd sequence with alpha, and bring that into AFX to play with. Will I still retain the ability to use the Titler features in Premire Pro, or do I essentially have to convert it to 'regular footage' on reimport as opposed to a 'Title?"
Thanks

Outline of After Effects CS4 scripting changes

Here's a link to a blog post that provides information about the new and changed features in a sparse outline format:
"After Effects CS4 scripting changes"

> We use no compression because the LED signs will not take any file that is compressed. I assumed that meant there was no codec involved. Is there a codec applied in CS6, even though it is uncompressed?
What Rick and I are getting at is: when you render from AE, in the Export Settings dialog there is a codec field; what do you set that to?
Quick terminology lesson. Codec and compression are not the same thing. When you encode video, you are always using a codec. Most codecs use compression, but some do not. "None" or "Uncompressed" codecs do not use compression.
After Effects does not add any compression other than what you specifiy in the Export Settings dialog. There should not be a significant difference between the files produced from AE CS4 and AE CS6. AVI, as a format, has not changed in many years. In other words, we know of no difference that would specifically cause this problem.
If the LED sign software has a problem with an AVI from AE CS6, we need to know the requirements of the LED sign software and how that AVI is failing it. So far all you have told us is "other people say it doesn't work".

After Effects CS4 AVCHD Render Problem (Film ruckelt)

Similar Messages

Maybe you are looking for