After Effects CS5 ACE Certification ?

Hello.
Not sure if this is the right forum to talk about, but can someone provide accurate information on when will be ready the CS5 Certification or Re-Certification, for After Effects and Premiere?
Right know there are only a few products with available CS5 ACE "Re" and Certication, but the main exams are mostly still on CS4. Is this apparent delay normal, for releasing updated exams?
Thanks for your time, and have a great kickstart 2011 to all.
Regards

It's published on the Adobe official page for the Certification List.
Each test and certification type has its proper value, from 50 dollars to 150 dollars.
I think the prices are fixed, being you a student or not.
Check it on:
http://www.adobe.com/support/certification/exams/
Regards
Nuno Caroço

Similar Messages

Adobe Download Assistant communication error(Error 107) only when I download After Effects CS5.5

I've been trying to download the After Effects CS5.5 Trial for over a month now and it is really frustrating because I don't have a problem downloading any other adobe trial just After Effects CS5.5, it says I have a communication error (Error 107) and I know I really don't because I can download any other trial from Adobe Download Assistant. I reallly need help to try to download this program. I don't know if it is that I'm in another country, my server, or something relevant but i would really aprecite it if you could tell me why this is happening.

I would recommend reviewing this thread http://forums.adobe.com/message/4274824#4274824. Please try the solutions listed within the thread to resolve your difficulties.

Sony NEX-5N AVCHD 2.0 1080p50 and Premiere Pro/After Effects CS5.5

Hi all,
I have a new Sony NEX-5N and have shot some test 1080p50 video using it.
On my quest for some new editing/production software to close the loop I have just downloaded and installed a Trial Version of CS5.5 Production Premium.
I am able to load my video files into Premiere Pro.
However, when I attempt to open the Video File in After Effects, I recieve the following Error message:
   After Effects error: '00023.MTS' cannot be imported - this '.mts' file is damaged or unsupported.
I have tried renaming the extension to .MPG, .M4V, .M2TS all with exactly the same result.
Perhaps this is a limitation of the Trial Version or perhaps a limitation of After Effects CS5.5. Is anyone able to advise?
As extra information I include below the TEXT output from MediaInfo for the file I am able to load into Premiere Pro CS5.5 but not After Effects.
Thanks.
General
ID                               : 0 (0x0)
Complete name                    : F:\AVI\Video\SourceMedia\00023.MTS
Format                           : BDAV
Format/Info                      : Blu-ray Video
File size                        : 61.8 MiB
Duration                         : 19s 616ms
Overall bit rate mode            : Variable
Overall bit rate                 : 26.4 Mbps
Maximum Overall bit rate         : 28.0 Mbps
Video
ID                               : 4113 (0x1011)
Menu ID                          : 1 (0x1)
Format                           : AVC
Format/Info                      : Advanced Video Codec
Format profile                   : [email protected]
Format settings, CABAC           : Yes
Format settings, ReFrames        : 2 frames
Format settings, GOP             : M=1, N=12
Codec ID                         : 27
Duration                         : 19s 680ms
Bit rate mode                    : Variable
Bit rate                         : 25.1 Mbps
Maximum bit rate                 : 26.0 Mbps
Width                            : 1 920 pixels
Height                           : 1 080 pixels
Display aspect ratio             : 16:9
Frame rate                       : 50.000 fps
Color space                      : YUV
Chroma subsampling               : 4:2:0
Bit depth                        : 8 bits
Scan type                        : Progressive
Bits/(Pixel*Frame)               : 0.242
Stream size                      : 58.8 MiB (95%)
Audio
ID                               : 4352 (0x1100)
Menu ID                          : 1 (0x1)
Format                           : AC-3
Format/Info                      : Audio Coding 3
Mode extension                   : CM (complete main)
Codec ID                         : 129
Duration                         : 19s 680ms
Bit rate mode                    : Constant
Bit rate                         : 256 Kbps
Channel(s)                       : 2 channels
Channel positions                : Front: L R
Sampling rate                    : 48.0 KHz
Bit depth                        : 16 bits
Compression mode                 : Lossy
Stream size                      : 615 KiB (1%)
Text
ID                               : 4608 (0x1200)
Menu ID                          : 1 (0x1)
Format                           : PGS
Codec ID                         : 144
Duration                         : 19s 135ms

Hi and thanks, this is exactly what I am looking for :-)
Tim Kurkoski wrote:
Other question: Is it just this one file that fails to import or is it all files from that camera?
All of the clips I have recorded fail to import to AE but work in PPro
Tim Kurkoski wrote:
Can you post a sample file that exhibits the problem so that I could try the clip on my machine?
I just recorded 4 seconds of a clock pendulum swinging, surprisingly the file was 20Mb!?!? Anyway, I have made the file available for download at the following location:
http://andrew.net.au/~rowan/avchd/00032.MTS
You can browse the directory at http://andrew.net.au/~rowan/avchd/ if you need to "right-click" and save as.
I am hoping it is a limitation of the trial as I have noticed a few other "gotchas" with the trial version.
Thanks for the advice about video format, I have noticed that my computer (Core 2 Duo) is very slow to process the H.264 stream, PremierePro cannot play the 30sec stream in realtime (starts to stutter around 23sec) and After Effects starts its stutter almost immediately (both just playing the stream with no effects) - that said WindowsMediaPlayer has no problem playing the same stream at full speed. I am however reluctant to do any transcoding except to a lossless format as it seems counter intuitive - but this will be the subject of another post, as I don't want to clutter this one.
Thanks again.

Mac OS 10.7 (Lion) won't start After Effects CS5.5 because it's a powerpc app!?

I've had CS 5.5 Master Collection installed on my Mac since it came out. All the CS 5/5.5 apps I've used up to now have worked fine, in 64-bit mode (Photoshop, Illustrator, Acrobat Pro, InDesign). Now I need to use After Effects, but I can't get it to start.
First it said it couldn't rename a Workspaces.xml file in the preferences directory in my home folder. In fact, there was no such file there at all. Nothing to rename. So, I uninstalled After Effects using its uninstaller; then reinstalled it from the install DVDs.
Now, it fails on startup saying the After Effects CS5.5 application cannot be run because PowerPC apps are no longer supported. True: OS X no longer runs apps that require Rosetta. CS 5.5 is does not require Rosetta; it's compatible with Lion. The OS 10.7 Known Issues KB article says nothing about After Effects: http://kb2.adobe.com/cps/905/cpsid_90508.html?promoid=JBQYY
So...what's going on? I need this thing working for a project with a deadline! I don't get it. Anybody seen this before? (I didn't find anything in the discussions about it, nor Google...)

Interesting article, but I knew I was leaving PowerPC apps behind when I moved to OS 10.7, and Adobe claims that After Effects CS 5.5 is fully compatible with Lion. But you must be right about prefs; there's gotta be something causing the Mac OS to think this version of CS is ancient...
Since my initial message, I've tried and failed to find any details about how to select the right prefs to delete. I also ran Disk Utility to repair permissions on my system drive. That got rid of the PowerPC error:) Now on startup AE says mediacore fails to initialize. I can choose to quit or continue on that error, but continuing just results in another error that says dynamiclinkmanager unexpectedly quit, and then AE locks up and I have to force quit it. Not much progress!
No other answers on this so far... Before I uninstall the entire Creative Suite and then delete all Adobe system and hidden files everywhere, any more suggestions? Or a list of the right prefs I should trash?

Required Directory. C:\Program Files\Adobe\Adobe After Effects CS5.5\Support Files\Required

That is the error i get when i open After Effects CS5.5 it hapens shortly after it shows me that purple square thing in the middle. then it says to go here. someone help me it worked before i noticed i needed to update. I was on CS5 for the longest time and i did the update for CS5.5 and now its not working!

We need more info on your system. Not much point to it otherwise. Also did you attempt a reinstall? Run as admin? turn off security stuff?
Mylenium

MBP 17" 2,3 GHz - After Effects CS5.5 is not usable - too slow

Hey!
I am a motiongraphics artist working mainly with After Effects CS5.5. I am coming from PC and I am quite new to the Mac-World. But for now I am not really satisfied - actually very disappointed. I have worked the last three years on a cheapo Acer Laptop - and I really have to say it was at least (I am not kidding!) twice as fast as my new MBP mid 2011. The other Adobe Apps don't run that good either - though I have to say I haven't had to work with them as much as with AE 5.5.
To name one thing that is really slow: Ram Preview, in the first place it takes ages per frame to render it, then mostly when it's done with rendering it is not played in realtime (more 1,2 fps ... in this range). So it's really not fun to work with this combination MBP + AE.
This can't be. The Macbook was 4x as expensive. And was build 3 years later. What's wrong with the Macbook?
My Specs:
2,3 GHz MBP mid 2011, 4 GB Ram (going to be 8 GB soon), 750 GB HDD, Hi-Res 17" Matte, OS X 10.6.7
I already tried running Windows 7 on this Macbook it was so terrible that I was kinda frightend and really just wanted to bring it back to the shop. But maybe there is some way I can fix this?
Thanks in advance for your help!
Cheers!

petershawn wrote:
And I always thought OS X / Apple Hardware was the way to go in the video-business. Obviously I was wrong all along.
The problem is OSX Lion not the specs of the hardware or CS5.x
If you can manage to revert the OS back to Snow Leopard ( which also can run 64bit software ), I bet your issues will be fixed.
And if you want to give Apples own Video-software a shot, then stay away from FinalCut X which has the same "quality" like the Lion..
Sorry, just saw that you have no Lion, I was redirected here from within Lions forum..
Message was edited by: Sjazbec

Photoshop CS6 PSDs into After Effects CS5.5

Hi there,
Our graphics department have recently upgrade Photoshop to CS6 version 13.0 x64. I am trying to open a .psd file they have created in After Effects CS5.5 version 10.5.1.2. However I get the following message:
'After Effects error: could not open (.psd name) because it is not a valid Photoshop document. ( 51 :: 19 )'
Is there any way they can save their photoshop files differently so that they will open or do I need to upgrade to After Effects CS6?
Thanks in advance for the help.
(wasn't sure whether to post this here or in the photoshop forum - thought I would try here first though)

I've never encountered such an issue, and switch between both versions regularly. On the machine I'm working on right now I have CS6 Creative Cloud installed, but do most of my AE work in CS5 or 5.5 because the clients I'm working for haven't upgarded yet. But all my PSD work is done in CS6.
Is there anything unusual in the file, ie 3D content? As Mylenium says, PS 3D has changed and is no longer supported by AE. Otherwise, are you moving between platforms, ie Windows to Mac? Does the file have a valid PSD extension?

Why does my After Effects CS5.5 keep crashing on me when I switch to other apps?

I have Adobe After Effects CS5.5 (v.10.5.1) and it keeps crashing when switching between AE and other programs. Here's a video so you can see what's happening.
I don't have any special plug-ins loaded except for what came with the program. OpenGL rendering is turned on and have tried turning it off to see if it make the problem go away and it doesn't make a difference.
Greatly appreciate any assistance I can get on this.
Computer System
Dell Precision M6600 Laptop
Intel(R) Core(TM) i7-2920XM CPU @ 2.50GHz
16GB RAM
2GB NVIDIA Quadro 4000M
Driver Version 285.62
Optimus is turned off so it's just the Quadro 4000M Card - no Intel HD Graphics in the background
413GB Free (687GB Total) Primary HD
200GB Free (250GB Total) D Drive
Windows 7 64-bit SP1 Professional
Adobe Master Collection CS5.5 (Website Download)
After Effects v.10.5.1 Update (Website Download version)

I opened the Event Viewer and it listed the problem as an Application Error. Here is the information that it gave me. Is the .dll file that it's listing causing my problem?
Log Name:
Application
Source:
Application Error
Date:
12/12/2011 9:25:48 PM
Event ID:
1000
Task Category: (100)
Level:
Error
Keywords:
Classic
User:
N/A
Computer:
adsfa-PC
Description:
Faulting application name: AfterFX.exe, version: 10.5.1.2, time stamp: 0x4dc4fb01
Faulting module name: NtrigInterfacePressure.dll_unloaded, version: 0.0.0.0, time stamp: 0x4d2dae27
Exception code: 0xc0000005
Fault offset: 0x0000000037e16090
Faulting process id: 0x161c
Faulting application start time: 0x01ccb946c75ad65a
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS5.5\Support Files\AfterFX.exe
Faulting module path: NtrigInterfacePressure.dll
Report Id: 25e2b81d-253a-11e1-9bd8-90004edb40d6
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2011-12-13T03:25:48.000000000Z" />
<EventRecordID>11585</EventRecordID>
<Channel>Application</Channel>
<Computer>adfsa-PC</Computer>
<Security />
</System>
<EventData>
<Data>AfterFX.exe</Data>
<Data>10.5.1.2</Data>
<Data>4dc4fb01</Data>
<Data>NtrigInterfacePressure.dll_unloaded</Data>
<Data>0.0.0.0</Data>
<Data>4d2dae27</Data>
<Data>c0000005</Data>
<Data>0000000037e16090</Data>
<Data>161c</Data>
<Data>01ccb946c75ad65a</Data>
<Data>C:\Program Files\Adobe\Adobe After Effects CS5.5\Support Files\AfterFX.exe</Data>
<Data>NtrigInterfacePressure.dll</Data>
<Data>25e2b81d-253a-11e1-9bd8-90004edb40d6</Data>
</EventData>
</Event>
Any ideas?
Thanks - jjgleim

Premiere and After Effects CS5.5 crash on startup

I had been using Production Premium CS5.5 for a few months without any problems. Then there was a power outtage a couple nights ago and since then Premiere and After Effects crash whenever I try to open them. I get an error message like:
Crash in progress. Last logged message was: <5980><AppDirs> <5> Required Dir = C:\Program Files\Adobe\Adobe After Effects CS5.5\Support Files\Required
The rest of the programs still work fine. I reinstalled a few times, used the Cleaner tool and also tried some solutions on this page:http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html, but no luck.
My last installation actually didn't give me any fatal errors or errors, but AE and Premiere still don't work.
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 0 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging%20Area\windows\pb_app.ic o42178f80493091e8e552c84a2897e9da68fce32_32_f80493091e8e552c84a2897e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
Please search the above error/warning string(s) to find when the error occurred.
These errors resulted in installer Exit Code mentioned below.
I'm using Windows 7 on a custom-built PC with i7-2600 processor and 16GB RAM, ASUS P8Z68-V/GEN 3 mobo, 560 Ti graphics card, 80GB Intel SSD for boot drive.
Note: I actually planned on upgrading to a new 120GB SSD next week and doing a clean install, do you think that could also fix this problem?

Browntimmy I would recommend posting in those product specific forums with your inquiry. There is troubleshooting steps which can be employed for both products which are not install related. The link to the forums is as follows:
http://forums.adobe.com/community/aftereffects_general_discussion
http://forums.adobe.com/community/premiere/premierepro_current

Is After Effects CS5.5 PowerPC-only? (Installation Problem)

I just installed Adobe Creative Suite 5.5 Production Premium on a new (2012) Mac Mini (Intel Core i7 processor) running OS X Mountain Lion 10.8.2. Most of the apps installed correctly, but After Effects CS5.5 gives me the following error when I try to launch:
You can't open the application "Adobe After Effects CS5.5" because PowerPC applications are no longer supported.
I tried uninstalling and re-installing the app (along with Flash Catalyst, which also fails), but the error remains. What's the deal here? Is it an installation problem, or is After Effects CS5.5 truly incompatible with my new hardware/OS? Any suggestions appreciated.

Okay, answered my own question. I was installing on a Mac Mini, which doesn't have an optical drive, so I was using a remote optical drive to install across my network. Turns out that confused the installer. I ended up copying the install DVD onto a flash drive and installing from that. Problem went away.

Nikon D7000 .MOV files in Premiere Pro and After Effects CS5.5

I recently upgraded from Production Premium CS5 to CS5.5. Initially Nikon D7000 .MOV files used in previous CS5 Premiere Pro project would not play well in CS5.5. Now .MOV files do work in both PP and AE CS5.5. Here are the steps I followed. Not recommending you follow my steps exactly, just providing info for those that are interested.
1.       Launch Premiere Pro CS5.5 and open previous PP CS5 project, convert project to CS5.5 and rename project file as not to replace previous CS5 project file.
a.       At this point .MOV files do not play in new project or in AE CS5.5
b.      Close Premiere Pro and After Effect if still running.
2.       Using Adobe Bridge CS5.5, batch rename;
a.       Make copies of original files to new folder location while renaming file extension from .MOV to .mpg
b.      Let Adobe Bridge finish creating all new thumbnail previews.
c.       Leave Bridge running in background.
3.       Launch Premiere Pro CS5.5, let Premiere finish recreating thumbnail previews if needed.
a.       Attempt to preview existing .MOV file in project. It worked for me.
b.      Attempt to play sequence containing .MOV files. It worked for me.
c.       Attempt to play or modify sequence .MOV files in AE CS5.5 via Dynamic Link within Premiere. It worked for me.
d.      Close Premiere Pro project and AE projects if open.
4.       Create new Premiere Pro project and sequence
a.       Import a different Nikon D7000 .MOV file not previously used or renamed.
b.      Attempt to play this newly imported .MOV file. This worked for me as well.
c.       The new, previously un-renamed .MOV file also worked in AE CS5.5 for me.
I will perform additional tests but at the moment Nikon D7000 .MOV files are working for me in CS5.5 after initially performing a batch rename in Bridge CS5.5 from .MOV to .mpg and letting Bridge create preview files. Even .MOV files not renamed now work.
An example of Nikon D7000 footage edited with Adobe Premiere Pro CS5.5, After Effects CS5.5, and Sound Booth CS5 can be seen on my blog, http://stevelandonsmyth.typepad.com/steve-landon-smyths-blog/2011/07/my-first-hd -video-shoot-with-nikon-d7000.html
My system: MacBook Pro 17" 2.3 GHz i7 quad core, 8GB RAM, 500MB SSD
Message was edited by: Steve Landon-Smyth

Hello,
I see 2 post in this thread from Todd that say they are working on a fix and it should be out soon. One is from July, the other from August. It is now Sept 7th and I still see no patches or fixes for any bugs. I spent 400 dollars on an upgrade, but is this upgrade going to be supported?
This is making me rethink upgrading to the .5's in the future.
It is a minor bug to most, but in that sense it should be an easy quick fix. Am I wrong? Is this really a complicated issue?
I apologize if this comes off like a rant, but thats kinda what it is. It is not hard to batch rename files, but its a pain to have to relink all those files in PP.

PLEASE HELP!! Weird screen glitch in After Effects CS5.5?!? (Windows 7)

I was editing some videos in the trial of After Effects CS5.5, and I went to render something in full screen (I've been using it for two weeks now, and i've rendered in full screen before) and suddenly a bunch of error messages started popping up,and After Effects closed out. Now every time I open After Effects, its like the screen zooms in: I can't see my taskbar or my tools for after effects, or anything on the edges at all. Production Premiere and everything else works fine, but After Effects is always like this now. I've searched all the help centers, and google, and youtube, and I've found nothing. I also tried unistalling and reinstalling the Master Collection trial but it still came up in full screen.
PLEASE HELP I only have 12 days left on trial and I'm trying to finish one last video.

Try deleting your preferences. If that doesn't do it, Reboot, Use the Adobe Cleaner Tool, then re-install AE. If that doesn't work let us know. It's probably your preferences.

Can After Effects CC open After Effects CS5.5 files?

Hello,
I'm currently using after effects cs5.5 and wanting to upgrade to the creative suite.
My question is, am i able to use my old cs5.5 files in the new after effects Creative Suite?
Thanks,
Joshua Northeast

Thankyou very much guys!!

No Audio In After Effects CS5.5(Even after rendering)

I currently have the After Effects CS5.5 Trial Version installed. I am running into a bad audio problem. For the first 2 days I have used it, the audio was fine, it played automatically and I didn't even have to render first to get it. Then, the third day, I got on that day and the audio jsut flat out didnt work. I did look it up on the forums and google, and nothing helped. I have tried rendering(with audio), using different video files and clips, and even reinstaling the trial. Nothing worked. The RAM Preview plays sound fine, and when I double-tap "L", the soundwaves do show, and they are accurate when played on the preview. I have tried WMV, AVI, and mp4 files, none of which have worked. I can edit and add effects and import picture and other files fine, but the audio simply doesnt work. I can't get audio by playing it normally.
I know it is not usual to ask questions about the trial, or to even have them answered, but this is important because I want to buy After Effects CS5.5, and before I do, I need to know if this is a computer problem, or if I did something to mess up the program, or if there is even a way to solve it. I don't want to buy it and realize I can't even use it with audio for some reason.
P.S. I am fairly new to this, so if you blast me with some complex, in-depth instructions, please try to make it rather simple, or just explain it well.
Thank You and sorry for the inconvenience,
Chris Madaras

> I can't get audio by playing it normally.
You said that audio played when you used RAM preview. That is how you play audio.
See this:
"FAQ: How can I play or preview sound (audio)?"
...and this:
"FAQ: Why is there no audio (sound) in my output file?"
Since you're new to After Effects, I very strongly recommend that you work your way through the materials here:
"Getting started with After Effects"

Mercury Engine in After Effects CS5.5? Or, why is After Effects so much slower the Premiere Pro?

Take this quote :
"by Todd Kopriva on Apr 25, 2010 at 8:08:14 am
'Mercury' is a marketing name for these performance improvements in Premiere Pro: - multiprocessing
- multithreading
- 64-bit application
- use of CUDA to to some processing on supported hardware
The first three of these are in After Effects CS5. (The first two have been in After Effects for much longer.)"
However, if I drop my Canon 5D Mark II footage (h264) into Premiere Pro it plays back SO MUCH better then the exact same footage in After Effects. Why is that? I DO NOT have an NVideo card and I have NOT applied any effects or scaling to the clip, just raw footage dropped into each program.
I do notice that After Effects has to render to play back (green bar being generated above footage). But it does slow very slowly, like 9fps. Premier Pro seems to cruise right along at near realtime. This is 24fps 1080p footage. One other point of interest, I have encoded the clip into Cineform codec as well. On Premier Pro I can tell a difference, the cineform scrubs a lot smoother then the original H264 clip. But, again, in After effects both the h264 and Cineform clips are very slow to render and scrub.
Any improvements along these lines for CS5.5?
Am I just missing something obvious?
Thanks for any info,
--greg.

Gregory Seattle wrote:
I think the problem is that hitting the space bar and hitting '0' (ram preview) both draw that green bar, and both seem to use it if it is already there. I guess the real difference is how that green bar gets generated. It does seem to get generated faster when I ram preview as opposed to hitting the space bar. Using both cores I have I guess (early 2009 24" iMac).
When you hit the space bar, AE TRIES to play back as it renders each frame. Imagine what happens if it's a comp with 120 3D layers that all accept lights and cast shadows. That's why you don't use the space bar.
In a RAM Preview, AE fills up the memory available to it with rendered frames, then plays them back from RAM. Depending on processor speed, dimensions of comp & frame rate, this may or may not be real time, but there are ways to get real time. With the space bar, you don't stand a chance at real time.
Gregory Seattle wrote:
From what I hear new iMacs are due out soon with the new Thunderbolt (!) and Sandy Bridge processors/chipsets. Should be a LOT faster then what I have now.
For AE work I'd say maybe yes, maybe no. To make AE REALLY speedy, you need a lot of processor cores and a boatload of RAM. iMacs aren't known for either of those things.

After Effects CS5 ACE Certification ?

Similar Messages

Maybe you are looking for