After Effects CS6 format error 45::35

I'm getting "After Effects Error: Photoshop File format error 1. (45::35)" in AE CS 6 with .IFF's from Maya. I know this is nothing new, this problem has been around for a loooooong time.
We like here at ABC like .IFF since it's native to Maya and a small file with alpha.
Close and open AE and it works for a while then the error appears, rather than me doing a work around and converting to another format, my question is: When do you think Adobe will have a solution?
Ray

The better question actually is: When will Autodesk stop "enhancing" the IFF format? There really is two sides to the equation and as long as Autodesk implement undocumented changes (including trivial stuff like incrementing the IFF version number in the metadata), any other company can only paly catch-up. Also the format has this odd "quality" where byte errors do not necessarily affect the visible data, so rendering errors may not actualyl show up unless you open the files in anotehr program. I understand your rationale for using it, but it really is not the best format for heterogenous workflows involving apps from different vendors. TIFFs are so much nicer...
Mylenium

Similar Messages

Adobe After Effects Cs6 Installation Error. HELP!

When i do my installation of Adobe After effects cs6, i install as trial version, because i want to see what it is like, and i do everything like everyone says, and then it stops at 2 percent saying Installation Failed and it comes up with these solutions, and i did them all about 5 times and it STILL wont work! SOMEBODY HELP!
And it also saidthis in the error summary:
Payload '{0A1E2FE2-B2AD-42F4-9C74-641853FB093A} Photoshop Camera Raw 7 6.0.98.0' information not found in Media_db.

I have exactly the same problem when installing CS6 Trial.

After Effects CS6 upgrade error in mac mavericks

Say hello to everyone.
Now i'm very tired and irritated about upgrading after effects cs6. Because my mac version is mac os x 10.9.5, mavericks so have to upgrade After Effects cs6.
BUT, only upgrade version 11.04 installed, and the others (11.01/ 11.02/ 11.03) still not installed and have an error message : the error code is U44M2P7.
What is this code mean and what should i do next?

If you have 11.0.4 installed, you have everything in 11.0.1, 11.0.2., and 11.0.3
There is no reason to install any update other than 11.0.4

After Effects CS6 crash error dynamiclinkmanager

Gyazo - 74d9cb70fd2e0505dbaacc34250214d1.png whenever i start up after effects i get this error message. i can not get after effects cc i can only run cs6 and this message pops up. i have tried to find a solution but I can't! Please Help!
After Effect error: Crash in progress. Last logged message was: <19732> <DynamicLink> <5> C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\32\dynamiclinkmanager.exe

Start here:
fixing permissions problem that impedes start of Adobe applications

After Effects cs6 download error

hello. i have a problem. when i try to download after effects it says to me : Eroor communicating with Adobe.com.(Error 107). Restart Adobe Download Assistant an try to add the product again. I restarted the programm but the error still exists. I reinstalled Adobe Download Assistant but its the shame...Can you help me?

After Effects CS6 requires a 64-bit version of Windows (http://www.adobe.com/products/aftereffects/tech-specs.html)
It won't install on a 32-bit version.

After Effects CS6 Extract Error With Screenshot

I recently downloaded the trial version of adobe after effects cs6 but when I try to extract the archive by running the .exe application it ends ups with an error that "A problem occurred while extracting some files. Check available disk space on your computer and the privileges on the destination folder.
MY LAPTOP SPECS....
Intel core i3 3rd generation processor
4 gb ram
610M 2Gb geforce Nvidia graphics card
Windows 7 64 bit ultimate / Windows 8.1 pro 64 bit
WHAT I TRIED.........
1]Running the file with administrative privilages
2]Tried installing in safe mode
3]Tried extracting the archive manually (error)
4]Tried installing in windows 7 64 bit pro (same error)

Yash Pranjale please try downloading a new copy using a different web browser. Also to confirm did you previously download your installation files for After Effects CS6 from Download CS6 products?

After Effects CS6 render error - grey artifacts

Hi there,
I was wondering if someone could help me? I am rendering out a video in After Effects using H.264 codec, High 5.0 Profile at CBR 5 and 25fps. However, on all occassions and with all videos, not just this one, when the video renders, many frames appear grey (see below);
I have tried rendering it out at various levels of quality, both CBR and VBR, and even using Adobe Encoder also, and the problem still persists. It is not always in the same place also and appears randomly. I was wondering if anyone else had come across this problem and had a solution?
I have re-sintalled the Adboe Suite on several occasion to try and counteract this, but again, the problem presists.
Any help would be greatly appreciated!
Thanks,
Ollie

It appears you are viewing your footage in Quicktime X, which in itself is not particulalrly sensible. Use the "classic" Quicktime 7 If it's okay there, then the file will work. Other than that this could be something with your source footage, your media cache, whatever. We cannot know. You are not nearly providing half enough info, so we end up guessing around. Also simply render to another CoDec and do the actual conversion in Adobe Media Encoder.
Mylenium

Trying to download After Effects CS6 Trial, Error message comes up.

How do I fix this? I'm trying to make a cool Graphic EQ to put on some videos. Help please!

What error message are you receiving? Which operating system are you using?

After Effects CS6 error: RAM Preview needs 2 or more frames to playback - any ideas please?

Hi everyone,
I'm running After Effects CS6 (11.0.4.2) on a MacBook Pro 2.8Ghz with 16GB RAM (Mac OS 10.9.4)
As a test, I created a 3 and a half minute Sequence in Adobe Premiere CS6, and then imported this into After Effects CS6, and placed it on the AE timeline.
This footage involves a couple of 1920x1080p footage movies, some psds and a large number of JPGs exported from two videos arranged as a sequence in two layers in Premiere, one on top of the other. So all in all for a Premiere / After Effects file I'd say it's reasonably heavy.
I then did a RAM Preview with Multiprocessing switched off - the 3 and a half minute sequence loaded into RAM, taking about 1min 30seconds, and played back in realtime at 25fps. This worked fine with 3,4,5 and 6 GB RAM available to other applications in the Memory Preferences. All things considered I think this is quite good. I can make changes, reclick the RAM Preview icon and my changes load into RAM and it previews ok.
My only 'complaint' is how long the RAM Preview takes to load up the whole thing.
I've been reading up on Multiprocessing and decided to try this to see if I can speed up the time it takes my RAM Preview to load up.
So I looked at some recommendations from Adobe and read information on various forums including this one.
My settings in the Memory Preferences are currently
• 6GB reserved for other applications
• Reduce cache size when system is low on memory - unticked
• After Effects Multiprocessing - ticked
• Installed CPUs (processor cores) - 8
• CPUs reserved for other applications - 6
• RAM allocation per background CPU - 3GB
• Actual CPUs that will be used - 2
This combination takes about 25 seconds to load up my 3 and a half minute sequence which I thought was pretty amazing.
I then pressed the stop button and then the play button - so now just playing the sequence briefly.
And also added a new layer - into the timeline - just a simple shape.
Then I tried a RAM Preview again.
I found I could load up part of the sequence but not load the whole thing into RAM.
I kept trying to get a RAM Preview and got this message
"After Effects error: RAM Preview needs 2 or more frames to playback" which seems to prevent RAM Preview from working.
Eventually I quit and restarted After Effects and the problem went away temporarily and then came back when I tried again.
I tried various changes to the Memory Preferences - trying 3GB available for other applications. This gave 13GB of my 16GB RAM to After Effects.
This made it take slightly longer for the After Effects error to appear but it still appeared.
I tried ticking Reduce Cache size in the Memory Prefs - the After Effects error still appeared, so having read this is supposed to make the issue better I now leave it untucked, but as far as I can see ticked or untucked, it makes no difference, the problem remains.
I've since tried -
Making 2,3,4,5 and 6 CPUs available for other applications.
Changing the Background RAM allocation per background CPU to 0.75GB, 1GB, 1.5GB, 2GB and 3GB
Lots of combinations.
But in the end, I always get the "After Effects error: RAM Preview needs 2 or more frames to playback" error.
It might take less or more time for the message to show up, depending on the combination of settings, but in the end I always got the same message appearing.
And I notice that I can RAM Preview less and less of the timeline. i.e. it becomes more blue than it does green and will load in only a small section of the timeline as opposed to the whole thing.
Reading further, I tried Edit > Purge > Image Cache and Edit > Purge > All Memory but still get the error message.
I also tried ensuring there were no other applications running e.g. Safari or Chrome or Firefox. And certainly not Photoshop or Premiere etc.
Reading even further, I tried two Memory management applications - 'Memory Clean' and 'Purge.'
Neither has had any effect - the After Effects error still appears.
Then I went back into the Memory and Multiprocessing Preferences.
I unticked Render Multiple Frames Simultaneously. And now the RAM Preview loads the whole 3 and half minute sequence in entirety, taking about 1 and half minutes to do so. It's working as perfectly as if I'd just quit and re-opened the application.
Then I went back into the Memory and Multiprocessing Preferences.
I reticked Render Multiple Frames Simultaneously.
The chose Edit > Purge > All
And tried a RAM Preview again. It loaded up in 25 seconds, but then, as previously, the error message came.
I tried Edit > Purge All - no effect.
And I tried going into the Media and Disk Cache Preferences and clicked Empty Disk Cache - still the problem remains.
I understand from my reading that After Effects CS6 11.0.2 was intended to fix this issue but I'm on 11.0.4 and as far as I can tell, I still have it - assuming it's the same thing.
As far as I can see, not using Multiprocessing allows me to work without these errors but take a bit longer to load the RAM Preview.
However I'd like to be able to use Multiprocessing as it seems it can potentially speeds things up quite a lot. I realise I could just not use it and AE would work, but I'd rather be able to make use of a feature of the software if possible, especially if it will speed things up and make optimum use of the my computer's hardware.
I've downloaded a trial copy of After Effects CC 2014. I'm still testing it but as far as I can see the RAM Preview error appears in this version of AE as well, but can take bit longer to show up in my experience.
Thanks everyone - if anyone has any thoughts or advice I'd appreciate hearing your opinions.
Kind regards,
John

You need to have much more RAM reserved for other applications and more CPUs reserved for other applications. Your current settings are crippling your performance.
Read these:
https://blogs.adobe.com/aftereffects/2009/12/performance-tip-dont-starve-yo.html
http://blogs.adobe.com/aftereffects/2010/03/performance-tip-dont-oversched.html
After you have adjusted your settings according to the recommendations on those pages, restart your computer and try again.

Adobe After Effects CS6 ERRORE

When I open adobe after effects cs6 Trial tells me "-After Effects Warning: Unknown Exception" I press ok it seems emi "After effects: AEGP Plugin AEDynamicLinkServer Plugin: Unknown error in Adobe Dynamic Link" I do ok and I get the message twice After that start I press ok and I get "After Effects can not continue: unexpected error during application startup" OS: Windows 7 64bit -Ram: 5,9- Processore: intel core i3 3.2Ghz OS: Windows 7 64bit -Ram: 5,9- Processore: intel core i3 3.2Ghz I tried to run it as admin and it does not work. I tried turning off firewall and even leaves. Updating the graphics driver says that I do not need. I delete preferences

WIthout proper system information and other details nobody can tell you anything. The unusual install location alone could be problematic...
Mylenium

Error when Opening After Effects CS6 Trial

Hey, When I go to open After Effects CS6 Trial I get an error saying "After Effects error: Crash in progress. Last logged message was: <956> <ae.blitpie> <2> Making New Context" and then I click ok and it says "After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2). (0 :: 42)" any help would be possible
Specs: Windows 7(64bit), I5 3330p, Asrock z75 motherboard, sapphire radeon 7850 1gb graphics card, 8gb ram.

is (or, has this been) http://www.redgiant.com/products/all/magic-bullet-suite/ installed on your computer?
what's your quicktime version?
are you using default video card settings? (if no, try using default)
and google: "After Effects error: Crash in progress" ae.blitpipe
to see a range of causes and solutions.

Error on Start-up for After Effects CS6

Okay, hello.
I have Adobe After Effects CS6, and I have recently gotten this error. I have posted about this before and the only thing I get is "Re-Install the product" or "Run the Adobe Cleaner and Re-Install and Restart" All of these things I do and they do not work!
I have also referred to the article about changing permission and this does not work either. So if someone has fixed this another way and could level with me so that I can go back to using this program. Any questions I am happy to provide the answer too.
"Emphasis on the 'Error: 16'"

Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium

After effects CS6 error file cannot be imported - this 'moov' file is damaged or unsupported

Hi there,
I'm working in After Effects CS6 (11.0.2.11)
I imported an AAF that was exported from Avid MC 6.5.2. I colour corrected and graded the sequence using colorista 2 and magic bullet looks and some other native AE FX.
Before exporting I decided to double check something to do with the audio. I imported the same AAF into FCP 7, took a quick look, but decided nothing needed to be done. I tabbed back to AE (which was left open), and upon returning, AE started giving me all these 'damaged or unsupported' errors.
Subsequently, AE will now not import any quicktime movies - even ones I rendered out of after effects earlier in the day (these quicktimes use ProRes422 codecs, animation codecs and other lossless codecs)
I've restarted, re-exported the AAF several times using diff settings, uninstalled perian... but to no success.
Anyone got any good ideas? I've had this happen before, where AE will import an AAF and it works first time no problem. Then something happens when I re-open the project and boom... 'moov' errors. It's really odd and very annoying - esp since it now won't import other normal quicktime movies too - with the animation codec. I have quicktime 7 pro installed and quicktime X on Mountain Lion (OS 10.8.3).
-Rich
Editor,
Caravan Media, New Zealand
System Details: MacPro (OS10.8.3) 2 x 2.93GHz 6-Core Intel Xeon, 24GB RAM, Radeon HD 5870 1GB

I have the exact same problem on a Mac with 10.8.3 and After Effects from the Adobe CS6 MasterCollection (AE 11.0.2.11 (german)): all of a sudden I cannot import any native QuickTime-Movies (ProRes, Animation) or even movies that use e.g. H264 in a QuickTime container. Even projects that worked 2 days ago that contain QuickTime-movies will not open anymore.
This happened 2 days ago without any action from me that I can think of that could have caused this. I did not install any new codecs or plugins, nor was there anything in the apple software update.
What I tried/checked so far (to no avail):
disks are OK,
file permissions are OK,
no Firewall is blocking anything,
deleted AE-prefs,
removed all 3rd-party plugins,
removed all 3rd-party codecs.
Edit: I did some further poking around, and it turns out that after deleting or resetting file permissions of the folder "~/Library/Preferences/Adobe/After Effects" AE will briefly allow you to open an existing project that contains QT-movies. If you then try to import any QT-movie you get the error message -- and after that you cannot open the project again.
This is really bad -- AE is basically unusable right now.
P.S.: The (german) error-message is this: "After Effects Fehler: Die Datei "filname.mov" kann nicht importiert werden: Datei "MooV" ist entweder beschädigt oder wird nicht unterstützt."
Message was edited by: Hanz Franz
Message was edited by: Hanz Franz

Are RAW formats still recognized in After Effects CS6 since latest CameraRawUpdate?

Apple iMac 10.1
Apple MBP 10.1
Mavericks
Adobe Production Premium CS6
Adobe Lightroom 5
Camera Raw v 8.4.0.199
Since the last update to AdobeCameraRaw, I can no longer import RAW still image file types into After Effects CS6. Results are the same on both computers.
In the Import Dialogue Box, CR2 and DNG file formats are greyed-out.
When attempting to click and drag a folder containing CR2 or DNG images into After Effects :
All files and folders containing these file types in previous After Effects projects have been rendered offline.
JPEGs, TIFFs and PSDs are supported and recognized and capable of being imported.
CR2 and DNG are not.
.MOV, .AVI and all other video formats that I have on hand to test remain stable.
CR2 in After Effects 11 was working just fine until the latest AdobeCameraRaw update.
Has anyone experienced similar problems?
Is there a solution?

This is a duplicate thread. Please don't duplicate the question. If you have further comments please ask them in your original post. Look for my response there.
http://forums.adobe.com/thread/1448050?tstart=0

Horrible final video quality in After Effects CS6 when rendering a 1920x1080 video with H.264 format

I've been using After Effects CS6 on my Macbook Pro for over a year now with no issues. However, today when I exported a video to be rendered in 1920x1080p with H.264 format, I got the worst quality final video I've ever seen. I filmed my video files in 1920x1080p (like usual), and I clicked all the same buttons I normally do to export a video, but every HQ video I try to export looks horrible. I haven't clicked any crazy buttons or anything out of the ordinary.
I always export a video following this sequence:
File > Export > Add to Render Queue > Lossless > H.264 (quality format) > video output (make sure it's checked) > audio output (make sure it's checked) > OK > Output to Desktop
My render settings are always set as "best settings" including "full" resolution and "best" quality.
Now, when I click H.264, a "settings mismatch" pops up and says:
"Warning: Output file will be resized from 1920x1080 (1.00 PAR) to 320x1080 (6.00 PAR) to meet format constraints"
The rendering quality and playback quality within After Effects is great, but once the video is exported, it is horrible.
PLEASE HELP?! I have deadlines I need to meet!

Use the H.264 encoding presets in Adobe Media Encoder.
The H.264 export features in After Effects have been removed in later versions because of numerous problems.

After Effects CS6 format error 45::35

Similar Messages

Maybe you are looking for