After Effects CS6 ScriptUI Initialization Error
So I've received:
After Effects warning: Au error was encountered attempting to initialize ScriptUI. {Initialization error" - Initialization error 'ApplicationEnvironment::scriptUIFlexSWFPath is not a valid pathname'}
Nothing I have tried has worked to fix this. I trashed the preferences, even uninstalled and reinstalled After Effects. Does anyone have any suggestions or know what's going on?
Thanks!
Hi Jonas,
I've spoken to the lecture who knows more about the software and this was his reply:
The students will be using files captured from multiple devices dependent on what they have access to. Mobile phone, flip cameras, HD cameras etc. Which will use different codecs. I do request students to export their work as .mov using the H.264 codec and that process hasn't thrown up any problems so far - but that is export not import.
The lecturer also mentioned students cannot import audio either.
The operating system is Lion 10.7.5.
Adobe After Effects CS6 version 11.0. I've installed updates on one of the macs 11.01 and 11.02 but doesn't resolve the problem
Mac Spec
3.2GHz Intel core i3
Memory 8 GB 1333mhz DDR 3
Graphics ATI Radeon HD 5670 512mb
Hard drive 350 GB
The other software installed on this machince is the Adobe CS6 Design Suite and Microsoft office and we dont use any third-party hardware.
They only devices that are attached to the Mac are camera,USB Pens and External Hard drives but these are all removable are are not permanently attached.
Similar Messages
-
After effects cs6 trial install errors
Hello,
I am trying to install the trial version of After effects cs6. I installed the entire cs6 master suite and everything worked except after effects. I tried again from the master suite and then with a separate after effects only installer(all from adobe's site) always getting the same results
here is the error summary:
I am trying to install on a new macbook retina, I had installed the CC trial but it has run out. maybe I need to uninstall Creative cloud, but all the other programs installed with no problems so i am not sure why its just after effects.Thanks so much for your help, but i am encountering some issues with the log. In the link you posted I was directed to look for the log in library>logs>adobe>installers and that the file would consist of the product name/install date and end in .log.gz
However I can't find and file that meets this description or even an installers folder inside the adobe folder
^this is all that is in the adobe folder, and both these folders are empty.
There is another folder called adobe downloads which contains these files
which still don't really fit the description provided.
am i doing something wrong? or should i look somewhere else?
thanks again -
After Effects CS6 - mp4 file error
Initially I struggled to get After Effects to import footage that was shot with a Sony F3 (mp4 codec)
I got it right eventually, don’t know how but it worked fine for more than a month.
This afternoon however it just refused to work and I get the standard error saying the file is damaged or unsupported.
I checked the forum but can’t seem to find a solution the problem. A couple of people suggested that the footage be converted to another format.
So I have 2 questions:
1. Is this a bug in CS6?
2. What other format can I convert the footage to without losing any quality that will play in After Effects.
Regards
IvanRisingStarThe files only open in VLC Media Player.
Neither Quicktime nor Windows Media Player want to play the file (.mp4 - Sony F3)
I don't know what changed since but it's very frustrating.
I have found a workaround though. I re-encode it using Adobe Media Encoder. I just have to go back into the Premiere project and replace the recoded files with the old .mp4 footage. -
Adobe Premiere and After Effects CS6 installer failed to initialize on Mac Book Air
Hi everybody,
I'm trying to install Adobe Premiere and After Effects CS6 for at least a month now.
I have downloaded the .dmg file at the Adobe Website and it starts to initializing the installer, then a error show up:
"The installer could not initialize. Download the Adobe Support Advisor."
There is no Adobe Support Advisor when I clicked on the link. "The Adobe Support Advisor has been discontinued" (http://www.adobe.com/support/loganalyzer/)
I've tried this many times, but every time being a failure.
EtreCheck version: 2.1.8 (121)
Report generated 19 de abril de 2015 16:29:58 BRT
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
MacBook Air (13-inch, Mid 2013) (Technical Specifications)
MacBook Air - model: MacBookAir6,2
1 1.3 GHz Intel Core i5 CPU: 2-core
4 GB RAM Not upgradeable
BANK 0/DIMM0
2 GB DDR3 1600 MHz ok
BANK 1/DIMM0
2 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en0: 802.11 a/b/g/n/ac
Battery Health: Normal - Cycle count 93
Video Information: ℹ️
Intel HD Graphics 5000
Color LCD 1440 x 900
System Software: ℹ️
OS X 10.10.3 (14D131) - Time since boot: 0:0:38
Disk Information: ℹ️
APPLE SSD SD0128F disk0 : (121,33 GB)
EFI (disk0s1) <not mounted> : 210 MB
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
Macintosh HD (disk1) / [Startup]: 120.10 GB (11.53 GB free) (Low!)
Encrypted AES-XTS Unlocked
Core Storage: disk0s2 120.47 GB Online
USB Information: ℹ️
Apple Internal Memory Card Reader
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Anywhere
Kernel Extensions: ℹ️
/Library/Application Support/Avast/components/fileshield/unsigned
[loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.10) [Click for support]
/Library/Application Support/Avast/components/proxy/unsigned
[loaded] com.avast.PacketForwarder (2.0 - SDK 10.10) [Click for support]
/Library/Application Support/VirtualBox
[loaded] org.virtualbox.kext.VBoxDrv (4.3.16) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetAdp (4.3.16) [Click for support]
[loaded] org.virtualbox.kext.VBoxNetFlt (4.3.16) [Click for support]
[loaded] org.virtualbox.kext.VBoxUSB (4.3.16) [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS5ServiceManager.plist [Click for support]
[running] com.avast.update-agent.plist [Click for support]
[loaded] com.avast.userinit.plist [Click for support]
[loaded] com.oracle.java.Java-Updater.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.avast.init.plist [Click for support]
[loaded] com.avast.uninstall.plist [Click for support]
[loaded] com.avast.update.plist [Click for support]
[loaded] com.macpaw.CleanMyMac2.Agent.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.oracle.java.Helper-Tool.plist [Click for support]
[loaded] com.oracle.java.JavaUpdateHelper.plist [Click for support]
[not loaded] org.virtualbox.startup.plist [Click for support]
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.avast.home.userinit.plist [Click for support]
[loaded] com.google.keystone.agent.plist [Click for support]
[not loaded] org.virtualbox.vboxwebsrv.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Aplicativo (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Dropbox Aplicativo (/Applications/Dropbox.app)
Internet Plug-ins: ℹ️
FlashPlayer-10.6: Version: 17.0.0.169 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
Flash Player: Version: 17.0.0.169 - SDK 10.6 [Click for support]
Default Browser: Version: 600 - SDK 10.10
SharePointBrowserPlugin: Version: 14.4.0 - SDK 10.6 [Click for support]
DirectorShockwave: Version: 12.1.3r153 - SDK 10.6 [Click for support]
JavaAppletPlugin: Version: Java 8 Update 31 Check version
User internet Plug-ins: ℹ️
npsf_cef: Version: sf 3.3.2.1 [Click for support]
Safari Extensions: ℹ️
Avast Online Security
3rd Party Preference Panes: ℹ️
Flash Player [Click for support]
Java [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Auto backup: YES
Volumes being backed up:
Macintosh HD: Disk size: 120.10 GB Disk used: 108.57 GB
Destinations:
HD Hayra [Local]
Total size: 499.75 GB
Total number of backups: 3
Oldest backup: 2014-09-04 21:52:41 +0000
Last backup: 2015-01-18 03:21:42 +0000
Size of backup disk: Excellent
Backup size 499.75 GB > (Disk size 120.10 GB X 3)
Top Processes by CPU: ℹ️
31% com.avast.daemon
17% lsregister
5% identityservicesd
3% WindowServer
2% coreservicesd
Top Processes by Memory: ℹ️
147 MB com.avast.daemon
103 MB Spotlight
77 MB Dropbox
73 MB ocspd
60 MB com.apple.WebKit.WebContent
Virtual Memory Information: ℹ️
352 MB Free RAM
1.84 GB Active RAM
1.47 GB Inactive RAM
628 MB Wired RAM
1.96 GB Page-ins
12 KB Page-outs
Diagnostics Information: ℹ️
Apr 19, 2015, 04:27:45 PM Self test - passed
Apr 19, 2015, 02:41:40 PM /Library/Logs/DiagnosticReports/com.avast.daemon_2015-04-19-144140_[redacted].cpu_resourc e.diag [Click for details]
Apr 17, 2015, 12:00:21 AM /Users/[redacted]/Library/Logs/DiagnosticReports/iMovie_2015-04-17-000021_[redacted].cras h
Apr 16, 2015, 11:59:35 PM /Users/[redacted]/Library/Logs/DiagnosticReports/iMovie_2015-04-16-235935_[redacted].cras h
Apr 16, 2015, 11:01:55 PM /Users/[redacted]/Library/Logs/DiagnosticReports/XPCKeychainSandboxCheck_2015-04-16-23015 5_[redacted].crash
Apr 16, 2015, 09:39:44 PM /Users/[redacted]/Library/Logs/DiagnosticReports/Finder_2015-04-16-213944_[redacted].cras hHi Thomas,
Kindly try the below mentioned link.
Error: "Installer failed to initialize" | Windows
Thanks,
Atul Saini -
Hi everyone,
I'm running After Effects CS6 (11.0.4.2) on a MacBook Pro 2.8Ghz with 16GB RAM (Mac OS 10.9.4)
As a test, I created a 3 and a half minute Sequence in Adobe Premiere CS6, and then imported this into After Effects CS6, and placed it on the AE timeline.
This footage involves a couple of 1920x1080p footage movies, some psds and a large number of JPGs exported from two videos arranged as a sequence in two layers in Premiere, one on top of the other. So all in all for a Premiere / After Effects file I'd say it's reasonably heavy.
I then did a RAM Preview with Multiprocessing switched off - the 3 and a half minute sequence loaded into RAM, taking about 1min 30seconds, and played back in realtime at 25fps. This worked fine with 3,4,5 and 6 GB RAM available to other applications in the Memory Preferences. All things considered I think this is quite good. I can make changes, reclick the RAM Preview icon and my changes load into RAM and it previews ok.
My only 'complaint' is how long the RAM Preview takes to load up the whole thing.
I've been reading up on Multiprocessing and decided to try this to see if I can speed up the time it takes my RAM Preview to load up.
So I looked at some recommendations from Adobe and read information on various forums including this one.
My settings in the Memory Preferences are currently
• 6GB reserved for other applications
• Reduce cache size when system is low on memory - unticked
• After Effects Multiprocessing - ticked
• Installed CPUs (processor cores) - 8
• CPUs reserved for other applications - 6
• RAM allocation per background CPU - 3GB
• Actual CPUs that will be used - 2
This combination takes about 25 seconds to load up my 3 and a half minute sequence which I thought was pretty amazing.
I then pressed the stop button and then the play button - so now just playing the sequence briefly.
And also added a new layer - into the timeline - just a simple shape.
Then I tried a RAM Preview again.
I found I could load up part of the sequence but not load the whole thing into RAM.
I kept trying to get a RAM Preview and got this message
"After Effects error: RAM Preview needs 2 or more frames to playback" which seems to prevent RAM Preview from working.
Eventually I quit and restarted After Effects and the problem went away temporarily and then came back when I tried again.
I tried various changes to the Memory Preferences - trying 3GB available for other applications. This gave 13GB of my 16GB RAM to After Effects.
This made it take slightly longer for the After Effects error to appear but it still appeared.
I tried ticking Reduce Cache size in the Memory Prefs - the After Effects error still appeared, so having read this is supposed to make the issue better I now leave it untucked, but as far as I can see ticked or untucked, it makes no difference, the problem remains.
I've since tried -
Making 2,3,4,5 and 6 CPUs available for other applications.
Changing the Background RAM allocation per background CPU to 0.75GB, 1GB, 1.5GB, 2GB and 3GB
Lots of combinations.
But in the end, I always get the "After Effects error: RAM Preview needs 2 or more frames to playback" error.
It might take less or more time for the message to show up, depending on the combination of settings, but in the end I always got the same message appearing.
And I notice that I can RAM Preview less and less of the timeline. i.e. it becomes more blue than it does green and will load in only a small section of the timeline as opposed to the whole thing.
Reading further, I tried Edit > Purge > Image Cache and Edit > Purge > All Memory but still get the error message.
I also tried ensuring there were no other applications running e.g. Safari or Chrome or Firefox. And certainly not Photoshop or Premiere etc.
Reading even further, I tried two Memory management applications - 'Memory Clean' and 'Purge.'
Neither has had any effect - the After Effects error still appears.
Then I went back into the Memory and Multiprocessing Preferences.
I unticked Render Multiple Frames Simultaneously. And now the RAM Preview loads the whole 3 and half minute sequence in entirety, taking about 1 and half minutes to do so. It's working as perfectly as if I'd just quit and re-opened the application.
Then I went back into the Memory and Multiprocessing Preferences.
I reticked Render Multiple Frames Simultaneously.
The chose Edit > Purge > All
And tried a RAM Preview again. It loaded up in 25 seconds, but then, as previously, the error message came.
I tried Edit > Purge All - no effect.
And I tried going into the Media and Disk Cache Preferences and clicked Empty Disk Cache - still the problem remains.
I understand from my reading that After Effects CS6 11.0.2 was intended to fix this issue but I'm on 11.0.4 and as far as I can tell, I still have it - assuming it's the same thing.
As far as I can see, not using Multiprocessing allows me to work without these errors but take a bit longer to load the RAM Preview.
However I'd like to be able to use Multiprocessing as it seems it can potentially speeds things up quite a lot. I realise I could just not use it and AE would work, but I'd rather be able to make use of a feature of the software if possible, especially if it will speed things up and make optimum use of the my computer's hardware.
I've downloaded a trial copy of After Effects CC 2014. I'm still testing it but as far as I can see the RAM Preview error appears in this version of AE as well, but can take bit longer to show up in my experience.
Thanks everyone - if anyone has any thoughts or advice I'd appreciate hearing your opinions.
Kind regards,
JohnYou need to have much more RAM reserved for other applications and more CPUs reserved for other applications. Your current settings are crippling your performance.
Read these:
https://blogs.adobe.com/aftereffects/2009/12/performance-tip-dont-starve-yo.html
http://blogs.adobe.com/aftereffects/2010/03/performance-tip-dont-oversched.html
After you have adjusted your settings according to the recommendations on those pages, restart your computer and try again. -
Adobe After Effects Cs6 Installation Error. HELP!
When i do my installation of Adobe After effects cs6, i install as trial version, because i want to see what it is like, and i do everything like everyone says, and then it stops at 2 percent saying Installation Failed and it comes up with these solutions, and i did them all about 5 times and it STILL wont work! SOMEBODY HELP!
And it also saidthis in the error summary:
Payload '{0A1E2FE2-B2AD-42F4-9C74-641853FB093A} Photoshop Camera Raw 7 6.0.98.0' information not found in Media_db.I have exactly the same problem when installing CS6 Trial.
-
Adobe After Effects CS6 ERRORE
When I open adobe after effects cs6 Trial tells me "-After Effects Warning: Unknown Exception" I press ok it seems emi "After effects: AEGP Plugin AEDynamicLinkServer Plugin: Unknown error in Adobe Dynamic Link" I do ok and I get the message twice After that start I press ok and I get "After Effects can not continue: unexpected error during application startup" OS: Windows 7 64bit -Ram: 5,9- Processore: intel core i3 3.2Ghz OS: Windows 7 64bit -Ram: 5,9- Processore: intel core i3 3.2Ghz I tried to run it as admin and it does not work. I tried turning off firewall and even leaves. Updating the graphics driver says that I do not need. I delete preferences
WIthout proper system information and other details nobody can tell you anything. The unusual install location alone could be problematic...
Mylenium -
Error when Opening After Effects CS6 Trial
Hey, When I go to open After Effects CS6 Trial I get an error saying "After Effects error: Crash in progress. Last logged message was: <956> <ae.blitpie> <2> Making New Context" and then I click ok and it says "After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2). (0 :: 42)" any help would be possible
Specs: Windows 7(64bit), I5 3330p, Asrock z75 motherboard, sapphire radeon 7850 1gb graphics card, 8gb ram.is (or, has this been) http://www.redgiant.com/products/all/magic-bullet-suite/ installed on your computer?
what's your quicktime version?
are you using default video card settings? (if no, try using default)
and google: "After Effects error: Crash in progress" ae.blitpipe
to see a range of causes and solutions. -
After Effects CS6 upgrade error in mac mavericks
Say hello to everyone.
Now i'm very tired and irritated about upgrading after effects cs6. Because my mac version is mac os x 10.9.5, mavericks so have to upgrade After Effects cs6.
BUT, only upgrade version 11.04 installed, and the others (11.01/ 11.02/ 11.03) still not installed and have an error message : the error code is U44M2P7.
What is this code mean and what should i do next?If you have 11.0.4 installed, you have everything in 11.0.1, 11.0.2., and 11.0.3
There is no reason to install any update other than 11.0.4 -
After Effects CS6 crash error dynamiclinkmanager
Gyazo - 74d9cb70fd2e0505dbaacc34250214d1.png whenever i start up after effects i get this error message. i can not get after effects cc i can only run cs6 and this message pops up. i have tried to find a solution but I can't! Please Help!
After Effect error: Crash in progress. Last logged message was: <19732> <DynamicLink> <5> C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\32\dynamiclinkmanager.exeStart here:
fixing permissions problem that impedes start of Adobe applications -
Error on Start-up for After Effects CS6
Okay, hello.
I have Adobe After Effects CS6, and I have recently gotten this error. I have posted about this before and the only thing I get is "Re-Install the product" or "Run the Adobe Cleaner and Re-Install and Restart" All of these things I do and they do not work!
I have also referred to the article about changing permission and this does not work either. So if someone has fixed this another way and could level with me so that I can go back to using this program. Any questions I am happy to provide the answer too.
"Emphasis on the 'Error: 16'"Creative Cloud Error Codes (WIP) | Mylenium's Error Code Database
Mylenium -
After effects CS6 error file cannot be imported - this 'moov' file is damaged or unsupported
Hi there,
I'm working in After Effects CS6 (11.0.2.11)
I imported an AAF that was exported from Avid MC 6.5.2. I colour corrected and graded the sequence using colorista 2 and magic bullet looks and some other native AE FX.
Before exporting I decided to double check something to do with the audio. I imported the same AAF into FCP 7, took a quick look, but decided nothing needed to be done. I tabbed back to AE (which was left open), and upon returning, AE started giving me all these 'damaged or unsupported' errors.
Subsequently, AE will now not import any quicktime movies - even ones I rendered out of after effects earlier in the day (these quicktimes use ProRes422 codecs, animation codecs and other lossless codecs)
I've restarted, re-exported the AAF several times using diff settings, uninstalled perian... but to no success.
Anyone got any good ideas? I've had this happen before, where AE will import an AAF and it works first time no problem. Then something happens when I re-open the project and boom... 'moov' errors. It's really odd and very annoying - esp since it now won't import other normal quicktime movies too - with the animation codec. I have quicktime 7 pro installed and quicktime X on Mountain Lion (OS 10.8.3).
-Rich
Editor,
Caravan Media, New Zealand
System Details: MacPro (OS10.8.3) 2 x 2.93GHz 6-Core Intel Xeon, 24GB RAM, Radeon HD 5870 1GBI have the exact same problem on a Mac with 10.8.3 and After Effects from the Adobe CS6 MasterCollection (AE 11.0.2.11 (german)): all of a sudden I cannot import any native QuickTime-Movies (ProRes, Animation) or even movies that use e.g. H264 in a QuickTime container. Even projects that worked 2 days ago that contain QuickTime-movies will not open anymore.
This happened 2 days ago without any action from me that I can think of that could have caused this. I did not install any new codecs or plugins, nor was there anything in the apple software update.
What I tried/checked so far (to no avail):
disks are OK,
file permissions are OK,
no Firewall is blocking anything,
deleted AE-prefs,
removed all 3rd-party plugins,
removed all 3rd-party codecs.
Edit: I did some further poking around, and it turns out that after deleting or resetting file permissions of the folder "~/Library/Preferences/Adobe/After Effects" AE will briefly allow you to open an existing project that contains QT-movies. If you then try to import any QT-movie you get the error message -- and after that you cannot open the project again.
This is really bad -- AE is basically unusable right now.
P.S.: The (german) error-message is this: "After Effects Fehler: Die Datei "filname.mov" kann nicht importiert werden: Datei "MooV" ist entweder beschädigt oder wird nicht unterstützt."
Message was edited by: Hanz Franz
Message was edited by: Hanz Franz -
After Effects cs6 download error
hello. i have a problem. when i try to download after effects it says to me : Eroor communicating with Adobe.com.(Error 107). Restart Adobe Download Assistant an try to add the product again. I restarted the programm but the error still exists. I reinstalled Adobe Download Assistant but its the shame...Can you help me?
After Effects CS6 requires a 64-bit version of Windows (http://www.adobe.com/products/aftereffects/tech-specs.html)
It won't install on a 32-bit version. -
After Effects CS6 Extract Error With Screenshot
I recently downloaded the trial version of adobe after effects cs6 but when I try to extract the archive by running the .exe application it ends ups with an error that "A problem occurred while extracting some files. Check available disk space on your computer and the privileges on the destination folder.
MY LAPTOP SPECS....
Intel core i3 3rd generation processor
4 gb ram
610M 2Gb geforce Nvidia graphics card
Windows 7 64 bit ultimate / Windows 8.1 pro 64 bit
WHAT I TRIED.........
1]Running the file with administrative privilages
2]Tried installing in safe mode
3]Tried extracting the archive manually (error)
4]Tried installing in windows 7 64 bit pro (same error)Yash Pranjale please try downloading a new copy using a different web browser. Also to confirm did you previously download your installation files for After Effects CS6 from Download CS6 products?
-
After effects CS6 error on splash screen
Hello! I recently install the CS6 Premium on my MacPro (osx Lion, and all kind of upgrades ) i try first on my laptop and everything is OK.
But when I try to open the AFTER EFFECTS CS6 on my MacPro, i found this error:
"Last log message was: <140735193569632> <GPUManager> <2> Sniffer Result Code: 3"
Mac OSX 10.7.3
Anybody Help Please!!!!!!!Thanks!
Hernan
MAYBE THIS HELPS TOO:Same problem here after a clean install of Lion.
Maybe you are looking for
-
Hi there, Just wondering, did anybody try running the Console on a Mac with OSX? I'd love to be able to monitor the network with my Mac ;-) Regards, Emerald
-
Sorry there was a problem checking your details.
Hi, When I go to run the broadband speed test on the BT website it says. Thought it was the website at first as it started doing this the other day. Sorry there was a problem checking your details. Please check you have entered the correct telephone
-
RankMirrors Isn't Working on My Server
For some reason my server fails to connect to the Pacman mirror: Server = ftp://ftp.gtlib.gatech.edu/pub/linux/di - /os/x86_64 So I wanted to change the mirror to the next best performing one however when I tried to run 'rankmirrors', it fails: [root
-
I have lost the ability to play games needing flash player on PPC G4 Tiger 10.4.11 Can't update to latest because update is for intel, my PPC is not. What do I do? I've tried loading the archived ones but can't really figure out what the last upda
-
Hello All, I have been playing around with ZFS dedup in Open Solaris. I would like to know how does ZFS store the dedup table. I know it is usually in memory, but it must leave a copy on disk. How is this table protected? Are their multiple copies li