After Effects Debug Event error [..\..\Src\Win\AsioHost.ccp-885]

anyone knows how to fix this , everytime i do a ram preview it freezes and gives me this error and it comesback and does it again
I have rebooted many times, cleaned the Cache Purged, removed unused footage etc

meaning decrease the layer size in order to make it work?
with my system
Windows Vista Ultimate 64bit (service pack2)
Dell Precision T7400
Intel Xeon Cpu x5472 @3.00GHz 2.99Ghz (2 processors) quad cores
8GB RAM
Adobe Master Collection CS4
how much ram do i let after effects use ?
this is how i have it set up
if these settings are wrong withing my machine can any of you let me know what will be the correct set up for it?

Similar Messages

[..\..\Src\Win\WinFile.ccp-754] Error In Media Encoder CS4!

======================================
Adobe Media Encoder has encountered an error.
[..\..\Src\Win\WinFile.ccp-754]
======================================
I have paid a small fortune to get the Masters Collection CS4, and after a few months of using it, I get this error for no reason!
It happens everytime I try to encode files in Adobe MEdia Encoder CS4 (Fully Updated) like music, home videos ect to different formats so I can share them with family.
My system: HP Pavilion DV9700 500GB HDD, 512Mb NVideo Geforce, 4Gb DDR2 RAM, Vista Ultimate x64.
Any help would be greatly appreciated!
Thanks
Justin

I get this error for no reason!
You are wrong. There is a reason. What the reason is, is hard to discern due to lack of information. Look at this link closely, read the included link to the WIKI and reply to the 16 questions asked at the end of the article if you have not yet found the solution with all the steps outlined: Some suggestions

Pro Debug Event - Error 290 /tick time

Suddenly a project I was working (and all the auto-saved folders) could not open anymore by giving me the following message: "Pro Debug Event - error 290 tick time"

Whenever you enounter an error, as a general rule, search the forum to see if it's already been addressed, or to join the discussion:
TickTime.cpp-290 error after opening a specific project | Premiere CC 2014.2 | Windows 8.1
Also, I always convert/ingest my media to use the same format that runs natively in PPro and does not require conforming.
Second, with regards to losing work with projects that can't be fixed. I always save my projects incrementally to new names as I go. When I hit an issue that cannot be resolved (and occasionally I do), I reopen the previously saved project and try something else. In fact today I hit a stack error. It was a three-day edit, and I was on version "(project name)_028.prproj" I just opened up the previous version "..._027.prproj", repeated the few edits that I lost in "028" and rendered without error. Follow that?
Anyway, read the link above for a possible fix.

How to resolve After Effects CC 2014 error:

how to resolve After Effects CC 2014 error: Could not create the file '/Users/User/Library/Preferences/Adobe/After Effects/13.0/dummy'.
Every time I try launch any of my CC programs, i keep getting this error message, has anyone come across this before?
I tried uninstalling and but still got the same error after the reinstalling

fixing permissions problem that impedes start of Adobe applications

Error message [..\..\Src\Win\WinPathUtils.ccp-553]

MY PROJECT:
26 hours of HD footage captured from Canon XH-A1. My system/project specs are:
- Intel Quad Core Q6600 2.4Ghz CPU
- 2Gb RAM
- 4 X 500gb SATA 2 Drives
- At least 60 GIGS of head room on each drive
- Windows XP
- 25P
- Version CS3 2.0
When I load up my project this error keeps popping up repeatedly -
[..\..\Src\Win\WinPathUtils.ccp-553]
Does anyone know what this means? It is stopping my project from working properly.
Cheers,
Jeremy.

Some troubleshooting tips.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Can uninstalling and installing CS4 fix the debug event error message?

Hello,
Can uninstalling and installing cs4 solve the debug event error message?

Can uninstalling and installing cs4 solve the debug event error message?
Well, that DOES seem to be the scripted mantra of Adobe TS in some out of the way country. According to most reports, that cures everything from trying to Capture over a USB cable to working with footage from your cellphone camera. In most cases, it has cured very little, though maybe the Debug Event error IS something that will be fixed by this.
Good luck,
Hunt

Exporting AVI clips (error: "[\Src\Win\WinFile.cpp-759]" after 4 %)

The following problem:
I have 2 adobe premiere project. both have the same film and film length but different video codecs.
1. project (low quality video codecs (mpeg4)
export works fine
2. project (high quality video codecs (avi)
export stops every time after 4% with the following error notice:
"Premiere Pro has encountered an error.
[..\..\Src\Win\WinFile.cpp-759]"
or if I want export the project with other codecs, eg H.264 then Adobe premiere freezes and I can close Adobe Premiere then.
Premiere memory settings (valid for both premiere projects):
Installed RAM: 3,7 GB
RAM reserved for other applications: 1,5 GB
Ram available for Adobe: 2,2 GB
Optimize rendering for: "Memory"
computer details:
system type: 64 Bit
installed RAM: 3,75 GB
processor: AMD Athlon, 2 x4 635 processor 2.90 GHz
graphics card: ATI Radeon HD4200
windows edition: 7
How can I solve the problem, so that I can export my whole project in AVI codecs without freezing problems or error problems?
Is it a hardware or software problem?
Thanks in advance for your help

Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link
Most especially the SOURCE FILE codec used... see Question 1

PE 11 new install on WinXP system - Debug event error, can't open program

Hi everyone,
I searched the community for similar errors and followed a couple of troubleshooting steps suggested for older versions of PE, but they didn't work. I just installed Premiere Element 11 on my Windows XP office desktop (also installed PS Elements 11, which works without a problem.) Install went well and I rebooted the system as prompted. Every time I attempt to open Premiere however (I am not attempting to load any video files, I just want to open the program to start a new project), I get the splash screen at first, but after a few seconds of "Loading" and/or "Initializing" a bunch of parameters, the program hangs and following screen pops up:
"Premiere Element Debug Event"
Premiere Element has encountered an error.
[..\..\Src\Core\Preferences.ccp-338]
Continue
When I click on "Continue" the following window pops up:
"Microsoft Visual C++ Runtime Library"
Runtime Error!
Program: ..e\Adobe Premiere Elements 11\Adobe Premiere Elements.exe
The application has requested the Runtime to terminate in an unusual way.
Please contact the application's support team for more information.
OK
So, here I am support team... Need more information, lol. I will also add that clicking the OK after the second window pops up often doesn't close the Premiere splash window still visible in the background, I have to CTRL-ALT-DEL and kill it manually by ending the process in Task Manager.
I installed the same program - same s/n - on my home computer as well, with no issues (that's a much newer, and much faster, Windows 8.1 system however.) I think you are entitled to install 2 copies though, right? So this wouldn't be related to too many attempts to register the same software?
Thanks for any help.

umbertob
Wea re not Adobe. We are Premiere Elements users who visit here under our own free will (unscheduled) to help other Premiere Elements users with their Premiere Elements workflows.
Please detail the resources of your Windows XP computer. What edition is it...professional, home premium, or other? You realize come April 2014 Microsoft will discontinue support for Windows XP. Apparently you can continue to use it, but Microsoft points to security risks in that state.
a. how much installed RAM, how much available
b. how much free hard drive space
c. is the video card/graphics card used by the computer up to date according to the web site of the manufacturer of the video card/graphics card.
Did you install the program to the computer default location according to the installation process?
Please review and then we can discuss the details.
Thank you.
ATR

Debug Event Error

About two weeks I asked for help. Hunt kindly responded with a request that if it happened again I am to give him certain information. I tried to do so by replying to his email, but for some reason it is being returned as undeliverable, so here are the basic messges again:
Quite frequently, I receive the following error message:
Premiere Elements Debug Event.
Premiere Elements has encountered an error.
[..\..\src\PlatformWindowsManager\PlatformWindowsManager.cpp-132]
The only option presented is a button which, if clicked on, exits the application without saving the content.
What is happening here? Obviously, this becomes very aggravating after a while.
Many thanks.
Walter
And here is the email I could not send to Hunt:
Hi Hunt,
Its happened again. Here are the events.
I had been capturing files from my DV video camera for about 3 hours. After each capture, I saved the captured file, opened a new file (not necessarily in the same folder) and started another capture.
I had just completed a capture and saved it and moved the timeline slider to be able to check one of the scenes (I don't remember if I actually pressed the Play button.) when the message appeared again. As before, when I clicked on "continue" the app shut down.
My assets are:
Processor: 2.40 gigahertz Intel Core2 Quad Q6600, 64 kilobyte primary memory cache, 4096 kilobyte secondary memory cache
Memory: 3072 Megabytes Installed Memory, Slot 'DIMM0' has 1024 MB, Slot 'DIMM2' has 2048 MB
Main Circuit Board: ASUSTeK Computer INC. P5K-E Rev 1.xx, Serial Number: MS1C81BP5K01234, Bus Clock: 266 megahertz, BIOS: American Megatrends Inc. 0906 12/10/2007
Drives: 1550.33 Gigabytes Usable Hard Drive Capacity, 1195.40 Gigabytes Hard Drive Free Space
           HL-DT-ST DVDRAM GSA-H10N SCSI CdRom Device [CD-ROM drive]
           3.5" format removeable media [Floppy drive]
           Canon MP Memory Card USB Device [Hard drive] -- drive 2
           Maxtor OneTouch II USB Device [Hard drive] (300.08 GB) -- drive 3
           ST3500320AS [Hard drive] (500.11 GB) -- drive 0 (C Drive)
           ST3750330AS [Hard drive] (750.15 GB) -- drive 1
OS: Windows XP Home Edition Service Pack 3 (build 2600)
Display: ATI Radeon HD 3800 Series [Display adapter], ViewSonic VP930 Series [Monitor] (19.3"vis, s/n PQ8053603156, September 2005)
MultiMedia: ATI Function Driver for High Definition Audio - ATI AA01, Panasonic DVC Web Camera, SoundMAX Integrated Digital HD Audio
I hope this will help - many thanks
Regards,
Walter

Walter,
I would assume that the e-mail notification feature is the little notice of a new reply to a post, that has been checked with the e-mail notification. To contact me, either the e'dress in my Profile, or an Adobe PM (Personal Message) sent from my Profile should reach me.
Now, with your error message, go to the Event Viewer (located in a couple of different places, depending on one's OS), but usually in the \\\System32 folder. It's also accessible from Programs>Utilities [?]. I have a shortcut on my Desktop, the moment that I get a new computer, so I'll have to look for it specifically, and then can only tell you where it is in XP-Pro SP3 - file name = eventvwr.exe.
In its opening screen, you'll see two windows. Look to the left and find "Application," and "System." Dbl-click on Application first, and you'll see a long list of programs and Processes. Scroll down, until you see some yellow triangles, and red circles with a white X. The name will begin with "Error," while the yellow triangles will read "Warning." Find some of these around the time/date as your crash. Dbl-click on each to get a dialog box. There may be useful info in there, but if there are any links, please follow those and read very carefully. Much can be contained in those links.
You might be better to do this, as soon as the program has thrown the error, and crashed. Then, you do not have to search down into the lists. Also do this for System, as well.
Doing this might lead to some clues into your mystery.
Screen-cap of Event Viewer:
Good luck,
Hunt

After Effects CS5.5 error: crash in progress last logged message was 3300 DynamicLink 5

Randomly when I start after effects CS5.5 and premiere pro CS5.5 I get the following error:
After effects error: crash in progress last logged message was <3300> <DynamicLink> <5> 000000001AAB2080
I have all programs updated.
PC Specs:
i7 930 @ 2.8GHz
12GB RAM
Nvidia GTX 570
Windows 7 Proffesional 64bit
Thanks in advance guys!

What does "randomly" mean? What do you do, when the issue appears? Do you run games before? Use other programs? Also check the Event Viewer for the exact cause...
Mylenium

After Effects CC Render Error H.264

Win 7x64
Adobe After Effects CC 2014 13.0.2
QuickTime Pro 7.7.6 installed
I'm IT. Not a day to day user of CC Products.
I have a client (Uni) that is having trouble rendering in After Effects H.264 with complex renders. Basic 'simple, single image' renders work without issue. And the error output is set to 'errors only' yet nothing spits out. Users are Standard Users.
Where is a jumping off point to decipher what is breaking?

That's nice.
But from your initial query, it's difficult to know whether this person is importing h.264 footage or trying to render h.264 footage. H.264 footage used in AE can cause problems with certain effects, and it is NEVER a good idea to render to h.264.
So this could be an operator error rather than a system error.
So I tell you what, Mr. IT Guy -- go buttonhole this person, put your heads together, and answer the litany of diagnostic questions you'll find here:
FAQ: What information should I provide when asking a question on this forum?
Between the two of you, you'll have a much better chance of coming to the root of the problem... but separately? That's a crap shoot.

"CAHeadless Debug Event" Error message

I have Adobe Photoshop Elements 9.0 installed on my Windows 7 computer and have recently started getting a message that I believe may be associated with that program. The message reads "CAHeadless Debug Event" "CAHeadless has encountered an error - [..\..\Src\DataManager.cpp-410]"
Does anyone know what may be causing this message and how to cure it. I am able to click the Continue button and everything works as it should but it is a little annoying.
Thanks
Patrick
Message title was edited by: Brett N

I am also having the same CAHeadless Debug error on PSE 9.
Switching catalogs does not help.
Turning off face recognition does not help.
I have looked through the forums and on the internet and it seems that this is a common problem for PSE 7, PSE 8, and now PSE 9.
Does anyone have a solution?

"CAHeadless Debug Event" Error

Greetings,
I am getting the following error popping up in a dialog box about every five minutes:
CAHeadless Debug Event
CAHeadless has encountered an error.
[..\..\Src\Clip\VideoClip.cpp-276]
I have to click "Continue" to make it going away temporarily.
As a workaround, if I click Edit > Preferences > Media-Analysis, and clear the "Analyze Media for Smart Tags Automatically" box, the errors stop. But I was wondering if here was an actual fix for this error, instead of just a work-around which I discovered.
Thanks,
Shane.
Photoshop Elements 11.0
Windows 7 Home Premium SP1 64-bit
Message was edited by: c_Shane

They don't take up much space—but since I installed version 11 there has been a lot of weird and strange behaviour, and I'm just trying to figure out what's causing it.
I deleted psa.prf, restarted PSE, and re-selected my preferences. Unfortunately, I'm still getting the error.
I notice that when I click Edit > Preferences > Media-Analysis, and click "Analyze Media for Smart Tags Automatically", a process called "ElementsAutoAnalyzer.exe" starts, and I start getting the error. When I clear "Analyze Media for Smart Tags Automatically", the "ElementsAutoAnalyzer.exe" process ends, and the error messages stop.
I'm guessing the only work-around is to not use this feature.
Shane.

After Effects 'Stopped working' error

Hello,
I need this to work very urgently. I have encountered this issue before with adobe premiere pro which was quickly resolved by updating windows service pack 1. I have all my drivers up to date and am getting a 'stopped working' error right after I try to launch after effects
Here is the windows log file report
Fault bucket , type 0
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: AfterFX.exe
P2: 13.2.0.49
P3: 54816501
P4: 7c1f
P5: 0
P6:
P7:
P8:
P9:
P10:
Attached files:
C:\Users\Timothy Ng\AppData\Local\Temp\WERB700.tmp.appcompat.txt
C:\Users\Timothy Ng\AppData\Local\Temp\WERB730.tmp.WERInternalMetadata.xml
These files may be available here:
C:\Users\Timothy Ng\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppHang_AfterFX.exe_d36b9ee8fbed22a9 ab3ed4e50ac851a1efbd2_229cbde3
Analysis symbol:
Rechecking for solution: 0
Report Id: 4dd4b12d-9991-11e4-8fa9-7824af362b95
Report Status: 1

Oops my bad.
Specs:
CPU: 4790k
RAM: 16gb @2400mhz
GPU: 780ti zotac amp
Mobo: Asus Ranger
Operating system: windows 7 professional
Edit: Thanks for the help it is very much appreciated.

Why my adobe after effects shows me error ( Dynmiclinkmanager.exe ) ?

My Adobe After Effects worked fine until I install QuickTime from there gives me errors. When is starting the user interface with the error ( Dynamiclinkmanager.exe )

Process:
After Effects [2032]
Path:
/Applications/Adobe After Effects CC 2014/Adobe After Effects CC 2014.app/Contents/MacOS/After Effects
Identifier:
com.adobe.AfterEffects
Version:
13.1.1 (13.1.1)
Code Type:
X86-64 (Native)
Parent Process: launchd [199]
Responsible:
After Effects [2032]
User ID:
501
Date/Time:
2014-10-16 09:23:59.823 -0500
OS Version:
Mac OS X 10.9.5 (13F34)
Report Version: 11
Anonymous UUID: AAAE1F0B-D145-61CB-DF58-86B63D66ED6A
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
terminating with uncaught exception of type dvacore::filesupport::dir_create_exception: dva_exception::what() error.
abort() called
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib
0x00007fff87256866 __pthread_kill + 10
1   libsystem_pthread.dylib
0x00007fff867a235c pthread_kill + 92
2   libsystem_c.dylib
0x00007fff8ccbcb1a abort + 125
3   libc++abi.dylib
0x00007fff8cd84f31 abort_message + 257
4   libc++abi.dylib
0x00007fff8cdaa93a default_terminate_handler() + 240
5   libobjc.A.dylib
0x00007fff8a24a322 _objc_terminate() + 124
6   libc++abi.dylib
0x00007fff8cda81d1 std::__terminate(void (*)()) + 8
7   libc++abi.dylib
0x00007fff8cda7e7b __cxa_rethrow + 109
8   com.adobe.dvacore.framework
0x0000000103486ee7 dvacore::debug::DebugDatabase::Instance() + 247
9   com.adobe.AfterEffectsLib.framework    0x000000010027724f egg::dvainit::InitDVAClient(bool) + 655
10 com.adobe.AfterEffects
0x0000000100002f51 main + 1393
11 com.adobe.AfterEffects
0x00000001000029d4 start + 52

After Effects Debug Event error [..\..\Src\Win\AsioHost.ccp-885]

Similar Messages

Maybe you are looking for