After Effects Error bee.dll

Hi,
I'm having trouble rendering and am really struggling trying to figure out what this error code means.
AppName: afterfx.exe AppVer: 8.0.2.27 ModName: bee.dll
ModVer: 0.0.0.0 Offset: 0007ab30
I get that whenever I try to render using the animation (or any other codec) using mutli-processors.
Anyone ever run into this before? Any ideas on what I can do to fix it?
It's causing my rendering to basically not function and I'm behind on a project.
I've also contacted adobe support but have yet to hear from them.
Thank you in advance!

Hello,
The error didn't happen when I was rendering to a quicktime movie export with animation codec. It seems to only happen now when I have rendering more frames at once. I don't want to render output to frames if I can help it as that's an entirely additional step if I have to go that route. No one has ever heard of a problem with bee.dll?
When rendering using the animation codec should I be trying to render multiple frames at once? I've got a Dell t3400 tower with a quad core processor and 3gb of ram (with switch to use in Xp 32bit)
Or is better to use all the processors to render a single frame together? Does it work like that?
I'm using cs3 AE 8.0.2 and QuickTime Pro - 7.4.5
Any help or guidance is appreciated!

Similar Messages

After Effects error: strange situation [0/-939524096] ( 26 ::139 ) help!

I am editing footage from a Nikon D7000 in Premiere. I select all and replace with after effects composition. Aftere effects opens and gives this error message. I am on a windows based machine.

Thanks for you responses. This is a short sequence with about 20 clips. I have in the past used this workflow successfully on short sequences. I like to assemble in pp and then apply colour correction/colour grading, and some sharpening in after effects. This problem has occured since I went from AE 5.5 to AE creative cloud. It was my intention to contrast and colour correct each individual clip as needed, then using an adjustment layer over the entire sequence to apply a colour grading. As an enthusiastic beginner, If there is a better way to accomplish this Id love to hear it.
The following is my system/software info insofar as seems relevant.
AE version 13.0.2.3
OS Name    Microsoft Windows 7 Home Premium
Version    6.1.7601 Service Pack 1 Build 7601
Other OS Description     Not Available
OS Manufacturer    Microsoft Corporation
System Name    DADSNEWDESKTOP
System Manufacturer    MSI
System Model    MS-7693
System Type    x64-based PC
Processor    AMD FX(tm)-4130 Quad-Core Processor, 3800 Mhz, 2 Core(s), 4 Logical Processor(s)
BIOS Version/Date    American Megatrends Inc. V2.4, 29/03/2013
SMBIOS Version    2.7
Windows Directory    C:\Windows
System Directory    C:\Windows\system32
Boot Device    \Device\HarddiskVolume1
Locale    Canada
Hardware Abstraction Layer    Version = "6.1.7601.17514"
User Name    DADSNEWDESKTOP\Owner
Time Zone    Eastern Daylight Time
Installed Physical Memory (RAM)    16.0 GB
Total Physical Memory    16.0 GB
Available Physical Memory    9.39 GB
Total Virtual Memory    31.9 GB
Available Virtual Memory    23.7 GB
Page File Space    16.0 GB
Page File    C:\pagefile.sys
Video card:
Name    NVIDIA GeForce GTX 550 Ti
PNP Device ID    PCI\VEN_10DE&DEV_1244&SUBSYS_15563842&REV_A1\4&DE2C59F&0&0010
Adapter Type    GeForce GTX 550 Ti, NVIDIA compatible
Adapter Description    NVIDIA GeForce GTX 550 Ti
Adapter RAM    1.00 GB (1,073,741,824 bytes)
Installed Drivers    nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Driver Version    9.18.13.4052
INF File    oem76.inf (Section030 section)
Color Planes    Not Available
Color Table Entries    4294967296
Resolution    1920 x 1080 x 60 hertz
Bits/Pixel    32
Memory Address    0xFC000000-0xFDFFFFFF
Memory Address    0xF0000000-0xF7FFFFFF
Memory Address    0xF8000000-0xFBFFFFFF
I/O Port    0x0000E000-0x0000E07F
IRQ Channel    IRQ 24
I/O Port    0x000003B0-0x000003BB
I/O Port    0x000003C0-0x000003DF
Memory Address    0xA0000-0xBFFFF
Driver    c:\windows\system32\drivers\nvlddmkm.sys (9.18.13.4052, 12.27 MB (12,866,008 bytes), 29/07/2014 7:50 PM)
The footage is: /D7000 H.264 MOV
Quicktime Player 7.7.5 (1680.95.13) is installed
error wording:
After Effects error: strange situation [0/-939524096]
( 26 ::139 )

After Effects Error: Unknown Adobe Dynamic Link Exception

I am using latest CS4 PP / OctoCore / 16 GB RAM / OS 10.5.6
I am not even using any Dynamic link references - just working within AE CS4 in a 1280 x 720 comp and every 10 minutes I get this error:
"After Effects Error: Unknown Adobe Dynamic Link Exception"
Is there a way to disable Dynamic Link in AE CS4 (turn it on and off)? I am not using it therefore do not need it. Anyone know the cause of this error?
Peace.
Joey

Hello, I can confirm Mylenium's point on MP. I checked multiple times with MP on and off. Then I started to check and uncheck the dll space checkbox in combination with MP. Allways the same result: MP lead to the error message when I did a RAM preview. I then removed all scripts from the "scripts" and the "sriptsUI" folders (I have Zorro and the like, too). Same difference. MP was the only factor that had influence on my machine.
I am using a Vista 64bit Quad at home where I tried this. At work I am on a 8core MacPro, with MacOSX 10.5.8. There I did not experience difficulties with MP.
Regards,
Andreas

After Effects error: opening movie - you do not have permission to open this file (-54)

Hi all,
I'm new to after effects. I have just started receiving the following error every time I try to render my movie:
"After Effects error: opening movie - you do not have permission to open this file (-54)".
Yesterday morning, I was able to render movies, however, after I did Apple's latest update I've started receiving the following error. What is happening is that I'm trying to render a movie. It gets to a certain point in the movie (about 0;00;16;09) and then this error pops up. This morning I've tried to repair the permissions with disk utility, but that doesn't seem to have helped.
I've searched Google and the Adobe support forums with no luck. Please help.
Thanks in advance for you help,
William

Have been able to downgrade to QT 7.3 using Pacifist. Did NOT require re-install of OS.
http://discussions.apple.com/thread...347251&tstart=0
Download the right version here:
http://www.apple.com/support/downloads/
Panther: http://www.apple.com/support/downlo...forpanther.html
Tiger: http://www.apple.com/support/downlo...31fortiger.html
Leopard: http://www.apple.com/support/downlo...forleopard.html
Install with Pacifist
http://www.charlessoft.com/
Now that I am back to QT7.3, iTunes7.6 is now asking me to update QT to 7.4 in order to be able to view the new movie rental feature of the iTunes store... which sorta sheds some light on the no permission error. Now that iTunes is renting, not just selling, movies, QT is now all fussy about ownership and permissions. Just a guess.

What does "After Effects error: Not enough memory to initialize PSL. ( 83 :: 8 )" mean?

So, about a week ago I did a fresh install of 64-bit Windows 7 Ultimate on a new PC, and subscribed to the Adobe Creative Cloud, installing After Effects CS6 and Photoshop CS6 from the Adobe Application Manager, then doing all updates (and I just checked right now at 10:35PM on July 26th, I have the latest versions of everything).
After Effects was working completely normal, then just now, I tried to import a Photoshop .psd and I got the error message:
After Effects error: Not enough memory to initialize PSL.
( 83 :: 8 )
Then After Effects crashed. So now it opens up normally, but when I try to import a .psd or open an After Effects project saved from an earlier version of After Effects (CS3 to CS5) I get the same error and a crash, every single time.
Searching the forums, I see people talking about this error when importing .psds into CS5, and they say that getting the latest updates solved the issue for them (which obviously can't help me). I'm running all legit software on a brand new computer with 32 GB of RAM which has passed all my physical stress tests so I know it's not hardware related.
The one thing I saw people suggest is to hold down Ctrl-Alt-Shift when starting the program. When I do this, Windows asks if I want to allow After Effects to make changes to the system, and when I say yes, I can import .psds and open the older AE files. When I close After Effects and reopen it without holding down the Ctrl-Alt-Shift keys, it goes right back to crashing.
Obviously the smart-*** answer is "then hold down Ctrl-Alt-Shift, dummy", and I'll do that for now, but is there any clue what the problem is?
I feel like kind of a chump because I decided to stop using my student versions of Adobe software (I haven't been a student for about four years) and pay the full price for the cloud membership and the latest creative suite, and it's full of bugs.

Now, I get the same ( 83 :: 8 ) error listed above, followed by a new dialog window that reads:
After Effects error: Crash in progress. Last logged message was: <4488> <DynamicLink> <5> C:\Program Files\Adobe\Adobe Premiere Pro CS6\Adobe Premiere Pro.exe
Then, when I click OK, I get:
After Effects can't continue: sorry, After Effects has crashed. For After Effects Help and Support, go to http://www.adobe.com/go/learn_ae_support. If you still can't resolve the issue, please contact Adobe Technical Support (2).
( 0 :: 42 )
Clicking OK to that gives me a chance to save the latest project, then the standard Windows 7 crash dialog window opens, the one that gives me the choice of "Check online for a solution and close the program" or just "Close the program" and lets me View problem details, which are:
Problem signature:
Problem Event Name:          APPCRASH
Application Name:          AfterFX.exe
Application Version:          11.0.0.378
Application Timestamp:          4f6d63ab
Fault Module Name:          StackHash_a85b
Fault Module Version:          6.1.7601.17725
Fault Module Timestamp:          4ec4aa8e
Exception Code:          c0000374
Exception Offset:          00000000000c40f2
OS Version:          6.1.7601.2.1.0.256.1
Locale ID:          1033
Additional Information 1:          a85b
Additional Information 2:          a85ba096cc6b6acabe6eaf35bf34dc60
Additional Information 3:          f862
Additional Information 4:          f86227a9dfa15a47cdb6c94bb0d08360

After Effects error: crash occurred while invoking effect plug-in "Looks" URGENT!

My name is Tyler and i'm a Mult-Media Editor in training. Just recently meaning just this project i've been getting this error "After Effects error: crash occurred while invoking effect plug-in “Looks”." every time i try to render. If i try to remove the clip where it messes up and replace it with another it will just mess up in another spot.
Screen Shot Here:http://gyazo.com/794429fd1091973c8a296a27d2af6fab.png
Information:
AE: After Effects CS5 (64-bit)
OS: Windows Home Premium (64-bit)
RAM: 8gb
Processor: 1st Gen. i7 Quad-Core
Graphics Card: NVIDIA GeForce GT 320
Updates: Installed All Updated For Adobe Products
Source Footage: Call Of Duty: Modern Warfare 2 @ 60fps using UT Video Codec YUV 420
Worked Before? Yes
Open GL: My open gl is not enabled
I've read other forums and watched tutorials. I've already done the following. (Not in order used)
1. Downgrade Magic Bullet Looks from 1.4.3 to 1.4.2 (Didn't Work)
2. Upgrade Magic Bullet Looks to MBL 2.0 from Magic Bullet Suite 11 (Didn't Work)
3. Uninstall my gfx card and re-install it with the newer version (Didn't Work)
4. Reset AE preferences by pressing alt+shift+ctrl on the shortcut (Didn't Work)
5. Change render settings from H.264 -> .AVI (Didn't Work)
6. I've deleted "AE_OpenGL" from my After Effects folder (Didn't Work)
My Composition:
http://gyazo.com/53c7a2789a752cfba7e908bed31d7c01.png
http://gyazo.com/da0cacaf4ef6d7e3276b6aa45b77da79.png
The look file is not that complex but i don't know if it'll help but there it is.
Look File Settings:
http://gyazo.com/25346bb318edadc54e09273977964c7d.png
I've never had this problem before and hope that someone has a solution to this problem... if so please post an answer. I don't know if its because i put the plug in on all of my clips and then made an adjustment layer with another Magic Bullet Looks or if it's my clips fault but i just dont know what to do.
-Tyler

It sounds like Looks is only crashing on this project. If that is so then it's most likely a problem with one of your video clips. Either there's a corrupted frame or some other codec glitch that's throwing the errors. I'd suggest replacing footage items with temporary footage. You could even use solids. Replace one at a time, then undo, until you find the footage that's causing the crash. Then either re-compress that footage to another codec or replace it.
If Looks is crashing on every type of footage then you need to pursue other options that are more system related.

After Effects Error "error cannot be imported this moov file is damaged or unsupported"

I'm working on a AE project and shut the project down before going to lunch. I come back and open it up and I get this error:
after effects error cannot be imported this moov file is damaged or unsupported
Nothing had changed in my project since earlier today. I've tried to import other .mov's and get the same error, I've also tried to relink the footage.
Any thoughts?

We need to know a lot more if we're going to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"
If you're using After Effects CC (12.0), start here for QuickTime issues:
http://bit.ly/QT_AE_CC_12

After effects error: rendering error while writing to file. Disk full.

Hi,
I tried to render a video in AE CC 2014, with RGB + Alpha as I wanted to keep the background transparent (rotoscoped) so that I can then use it in Premiere.
I chose to export in Quicktime, with uncompressed 8bit.
After it rendered it for a little while I had a window pop-up saying
After effects error: rendering error while writing to file "E:...blabla". Disk full. The file may be damaged or corrupted. (-1610153463).
I read a thread posted in the forums but i do not understand the solution provided there.. What is a POD??
I have a Win7 Ultimate, x64. Plenty of disk space, and 16 Go ram.
Please help, I canoot go further in my project with this bug...
Jaywaii

Is the drive you are rendering to formatted FAT32 by any chance? If so you can only render up to 4Gb for one file. Try rendering out a TIFF sequence instead. Litte tip - push the LZW compression tickbox in format options for a lossless compression, this will keep you file size way down.

After Effect error: Rendering error while writing to file

Greetings,
I'm a beginner and am starting to learn most of the basics but every time I try to render a specific type of composition, I get this massage:
After Effect error: Rendering error while writing to file "C:Users\Admin\Videos\720p.mp4".Unknown Error! (-1610153453)
RENDER SETTINGS:
LENGTH: 8min. and 30 sec
FORMAT:H.264
CODEC: mp4
RESOLUTION: 1280 x 720
AUDIO: 48.000 kHz, Stereo
OUTPUT LOCATION: C DRIVE (22GB FREE)
I got Windows Ultimate 64-bit and Adobe After Effect CS5.5 64-bit (both on C drive) installed in my laptop.
When I first installed after effect, I rendered a part of the whole composition (AVI, 720p) and it worked but after that when I rendered with
format H.264 it showed this massage. Then I tried to change it back to AVI. and rendered. again the same massage.
My C drive isn't full, I have 22GB SPACE AVAILABLE.
And when I try to save it on D (114GB free) or E drive (33GB free), It shows me the SAME MASSAGE.
PLEASE HELP
Thanks in advance.

Hi HR and everyone that have the problem error (-1610153453)
In my case I solved the problem changing the destination folder, I was rendering in a folder with a non english character! in my spanish language we have the "Ñ" ('n' with a wave on top ) after effects mp4 codec NO Ñ or cyrillic, etc...
I finally solve it thanks the russian friends: (http://nix-studio-edition.ru/tutorials/faq/1083-ae-1610153453.html) and Google translator
Hope it helps to desperate workers
Thanks

After Effects error : layer does not have a source.

Hi All,
I add a Text layer and then add my custom fill effect to it. Then I call AdvItemSuite1()->PF_ForceRerender(in_data, &(params[0]->u.ld)) from AEGP for all the layers. But only for Text layer, AE pops up a dialog displaying the following error :
After Effects error : layer does not have a source.
(26::335)
Why is this happening? What other call can I use to rerender all the layers?
Thanks & Regards,
Dheeraj

Am 13.04.2011 12:21, schrieb dheeraj_c:
For now just added a dummy parameter in the effect and calling AEGP_SetStreamValue() to render all the layer with effect.
I also have experienced problems with PF_ForceRerender(),
AEGP_SetStreamValu() seems like an alternative solution...

After Effects error: Could not launch Adobe Analysis Server (515) ( 25 :: 101) *POSSIBLE FIX*

Hi. Im New to the forums so sorry in advance if i do something incorrect
Since my Purchase of Adobe CS6, I was not able to use dynamic link, or the plugins that required you to connect to the Adobe Analysis Server (3d Tracker, Warp Stablizer ETC) It would always give me the error
After Effects error: Could not launch Adobe Analysis Server (515)
( 25 :: 101)
Or if i would use dynamiclink
The Importer created a generic error
Through hours and hours searching through the internet, and trying possible fixes, i found possible fixes that might help people with this error.
*Before attempting any of these fixes, make sure you reinstall CS6 Using the Adobe Cleaner*
This guide is for Windows OS Only.
If the error still presists, try these options
-If your windows account is not a administrator, Run Adobe After Affects CS6 As Administrator
-Disable your Anti-Virus and your Firewall
I know you have probably heard this over and over again, but this is mainly the cause of the problem. Some Anti-Viruses even when disabled, go into some sort of one eyed open mode, where it still monitors your computer ever so slightly, so you may want to uninstall the anti-virus. As for the firewall,
1) Go to your start menu search "Check Firewall Status"
2)Then to the left of the window, click Turn Windows Firewall on or off
3)Then tick "Turn of Windows Firewall" on BOTH Home or work network and Public Network.
-Close and Uninstall filtering and spyware programs such as Netnanny and Premiere Opinion. This might be using the TCP Ports that is needed for After effects, dynamic link and adobe analysis server to communicate
-Start up Adobe Analysis server Manually. This can be done by going to C:\Program Files\Adobe\Adobe After Effects CS6\Support Files and running Adobe Analysis server.exe as Adminisrator, Then starting Premiere, After effects, etc.
-If the Adobe Cleaner didnt already, Clean your registry. This can be done with free applications such as CCleaner.
If none of those options work, I would suggest a full format and reinstall of windows.
I hope this would help people with this issue.

captain_astronaut wrote:
I'm running the latest version. Just installed yesterday.
You can download and install the latest version (and older versions) of versions 11, 12, and 13 from Adobe right now. That is why I was asking for the exact version number with decimals. Just the other day, someone said they were running the latest version and they weren't aware that CC was even a thing. They were running version 11.0.3 (which isn't even the latest version of CS6 - it's 11.0.4). That's why I always ask.
captain_astronaut wrote:
I'm on a Mac so I don't have anti-malware, or other security software running.
That doesn't seem like a good idea. While there can't be anything technically referred to as a "virus" on the Mac OS (due to the underlying structure), there can be (and are) malware variants out there that do attack machines running the Mac OS. As Apple products have grown in popularity, developers have been creating more and more malware aimed at OSX.
I certainly hope you at least have your firewall running.
captain_astronaut wrote:
I tried launching Premiere yesterday and it crashed.
This points to a much more serious underlying problem. Thousands (if not millions) of people are running Premiere and After Effects on Macs. What sort of error messages did you receive when it crashed?
Try installing version 12 of AE and the previous version of Premiere as well and see if they run.

Please Help After Effects Error:Crash in progrss.Last logged message was: 8020 GPU manager Sniffer Result Code:3

Tell us about your computer hardware.
A:Here is my specs:
i-7 4770 motherboard
8 gb of Ram
What operating system?
A:Windows 7 64 bit OS
If you are getting error message(s), what is the full text of the error message(s)?
A:After Effects Error:Crash in progrss.Last logged message was:<8020><GPU manager>Sniffer Result Code:3
What were you doing when the problem occurred? What is the exact sequence of steps that you are taking?
A: Opened it and the error started

@Todd_Kopriva
thank you very much it works now

After effects error: unknown exception on frame 0 in 3D Camera Tracker. (1) (25 :: 16)

I am getting this error code ( http://prntscr.com/2qbcro ) when i open a project i've been working on recently. When i press ok, everything that was in the project dissapears. I've tryed to open other projects with 3D camera tracker, and they works fine. I've also been trying to re-install after effects, but with no luck...
I haven't been installing any new third party plugins lately.
I tryed to import the actual AE file. It gives me the same error, but it is not starting up a new project, all the files that i've been using in the project is there in the project panel. But none of my compositions is open. When im trying to open them by double clicking on it, it comes up with a new error saying "After effects error: layer does not have a source (26 :: 335)" ( http://prntscr.com/2qdscz ) (Only some of the compositions is giving me this message, all the compositions where i've been using 3D camera tracker in it, is giving me the message) I'm trying to delete all the compositions that is giving me this error message, but when i've deleted some of them, and i'm trying to save the new project, my after effects crashes, and some new weird error messages is popping up, like: http://prntscr.com/2qdtsu & http://prntscr.com/2qdu67. After these messages it automaticly quits out of after effects.
If you could help me out, i would be soo damn happy!

i tryed to explain it in my other text:
I tryed to import the actual AE file. It gives me the same error, but it is not starting up a new project, all the files that i've been using in the project is there in the project panel. But none of my compositions is open. When im trying to open them by double clicking on it, it comes up with a new error saying "After effects error: layer does not have a source (26 :: 335)" ( http://prntscr.com/2qdscz ) (Only some of the compositions is giving me this message, all the compositions where i've been using 3D camera tracker in it, is giving me the message) I'm trying to delete all the compositions that is giving me this error message, but when i've deleted some of them, and i'm trying to save the new project, my after effects crashes, and some new weird error messages is popping up, like: http://prntscr.com/2qdtsu & http://prntscr.com/2qdu67. After these messages it automaticly quits out of after effects.

After Effects error: There was an error processing the PDF document.

I have been struggling with this problem ever since CS4 was installed.
I have the CS4 Mac Master Collection.
I am using Illustrator to create text for animation in After Effects.
I can create text in Illustrator and import it into After Effects fine. But when I go to make a change to
the Illustrator file, even as simple as changing a color, I get this error.
After Effects error: There was an error processing the PDF document. The file may be damaged or corrupt. (50::29)
The Illustrator file is then toast as far as After Effects is concerned. It cannot be opened or reimported.
I have to start over again and over again, rebuilding the Illustrator file each time.
HELP!!!

This is an issue with AI and ultimately therefore also the AI routines that AE shares to access such files. Has been there forever and neither the AI people nor the AE team seem to be able to fix it in a consistent manner. Simply save a copy of the file from AI, then use Replace Footage instead of reload or at least always fully reload the AE project.
Mylenium

After Effects Error: rendering error while writing to file...Output Module failed - 1610153646

Hi – I’m currently working with someone who is running After Effects 5.5v10.5.0.253 on a PC which is running Windows 7 Ultimate. The computer has just recently been built and the software is newly installed. (ie. a couple of weeks old, max). Up until now, we have been using After Effects with no real issues. But tonight, we started to see the following error message, when trying to render something out:
“After Effects Error: rendering error while writing to file xxxxx. Output Module failed, the file may be damaged or corrupted -1610153646” – displayed during render, which meant the render failed.”
We started to review forums to see if we could come up with a fix and tried a few of the more common suggested solutions, including:
Make sure there are no third-party plug-ins or Windows incompatible elements installed - as it’s a pretty new install, we haven’t added anything except out-of-the box elements.
Clear the render queue – did this, no change.
Reinstall Quicktime – did this, no change.
Reinstall Creative Suite – also no change.
Check the default program to open .mov files is Quicktime – Quicktime was already the default.
A bit more detail about the machine...
Ram is 32gb
GPU is GeForce GTX 660ti
250gb soild states
2tb raid drive
Any help would be much appreciated. This is now happening on all AE files, even files that worked fine earlier in the week. Other than the AE and QT reinstalls mentioned above, nothing new has been added to the machine this week. On a deadline – so a quick response would be amazing, right about now. Thanks.

Hi Mylenium- thx for the quick response. We have have tried a bunch of different settings. AVIs work and we can do image sequences too. The only major problem seems to be with Quicktime files. While I appreciate your suggetion to convert with AME - this is only a workaround. Was really hoping for a solution that will fix the problem in After Effects? Heard rumor from a few friends in the biz, that this is a major bug... if possible, some feedback from Adobe product devs or someone with a technical background would be great! Thx.

After Effects Error bee.dll

Similar Messages

Maybe you are looking for