After Effects for Windows 7 32 bits?

Is there any version of this fabulous software for Windows 7 with 32 bits? I have 4 GB of RAM. I yould like to have this product but I don´t know which version or how can I find it.

I had download this version of AE Cs4... But when I tried to install it, this appeared...
An error has ocurred in the extraction of some files. Check that you have enough Hard Disk in your PC and the write privileges of the destiny file.
I had mroe than 300 GB of space in my hard disk and I had change the destiny file, but It itsn´t working.
And when I run the setup...
The first square: Checking system profile.
Second Square: Instalation error
The configuration has detected an error and it can´t continue. Please contact the service of client attention of Adobe to get help.
I had try a lot of things...
What shall I do?
Sorry for my English, because my first language is Spanish.

Similar Messages

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

HT1222 i found itunes for windows 8 64 bit but after downloading it iwas told it cant work in my system. what can i do to make it work?

i found itunes for windows 8 64 bits after downloading it i got an error message saying it cant work on my system. what can i do to make it work?

i found itunes for windows 8 64 bits after downloading it i got an error message saying it cant work on my system. what can i do to make it work?

HP Officejet 4255 driver for Windows 7, 32 bit. Not in pull up list or OS(can't update)

HP Officejet 4255 driver for Windows 7, 32 bit.
Driver is not in pull up list and not in OS(can't update OS basic). Almost all series are listed but 4200 series is missing.
After upgrade to Windows 7, it has become a problem. Some solution should be given.
Can someone help?
Regards,
Raul

Ok, I found in the Net the drive 7uw706ww.zip, which is Version 6.1.4.2, while the updated version is 6.1.10.5 (7UW708WW).
I tried again the GPS, and it wasn't working.
Anyway, before downgrading, I tried to reinstall the new driver, downloading and installing the .exe instead going through System Update.
Result: now GPS is working (same place, same conditions, just 5 minutes later)!
Don't know where the difference is...
600, R52, T61p, X301

Cannot install Boot Camp 3.2 upgrade for Windows 7 64 bit

I recently installed Windows 7 64 bit on my macbook. I also installed Boot Camp 3.0.1 after Windows 7 installation, however, WiFi did not work. Therefore, I needed to upgrade to the latest Boot Camp 3.2. However, when I tried to install Boot Camp 3.2 upgrade for Windows 7 74 bit, I got an error message saying that I needed Boot Camp 3.1 installed first. I CANNOT find Boot Camp 3.1 upgrade for Windows 7 64 bit on Apple website at all. Can someone please help me on this? Is there a way to get the complete Boot Camp 3.2 package that can simply be installed on version 3.0.1??

here is the link to bootcamp 3.1 for windows 7 64 bit http://support.apple.com/kb/DL1336 .. and no there is no package that can be applied to the windows side to go from 3.0.1 to 3.2

Having issues installing iTunes 11.1.4 for Windows 7 (64 bit).

Issues installing iTunes 11.1.4 for Windows 7 (64 bit).This install clobbered my previous version of iTunes. Error message is "service Apple Mobile Device failed to start". Cannot start the service manually even though I am the administrator of the machine. There is obviously some conflict that was recently introduced by a Windows update or in the Apple installation. I have tried removing iTunes and the AMDS (the Apple mobile device service) and reinstalling with the same error message.
Thanks for any suggestions you can provide!
Marilyn

Hey there Marylin,
It sounds like you are unable to start iTunes due to this error message even after uninstalling the iTunes application and the Apple Mobile device. I would recommend uninstalling not just those 2 applications but iTunes and ALL its associated applications with the following article:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/ht1923
Thank you for using Apple Support Communities.
Regards,
Sterling

Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng

Can any one help me with Drivers for Windows 7 64-bit for HP Pavilion 15-p125ng? I'll be very grateful for any answers
This question was solved.
View Solution.

Hi:
You should be able to use the drivers and software from this model on yours...
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6936...
When you go to install the graphics you have to install these drivers in this order and reboot after each installation.
1. Intel chipset installation utility.
2. Intel HD graphics driver.
3. Nvidia HD graphics driver.

Can someone help me with installing the latest version of iTunes for Windows 7 64 bit Home Premium?

Latest version of iTunes for Windows 7 64 bit Home Premium downloads just fine. But, fails to install.
"Unblocked and gave all permissions." Still, no go.
I see by reading the other posts on this forum that I am not alone. Any help?
Frustrated!

Ok...This was very odd. I left the installation program, in what I considered a frozen state on screen. After about 30 mins, to my surprise, It installed! I'm not computer literate, so, I don't know what to say. But, to just WAIT for it to respond! Good Luck!

What's up with iTunes for Windows 7 64 bit? Makes my PC run like a 286 on Windows 3.11.

What's up with iTunes for Windows 7 64 bit? So slow and draggy. Makes my high end PC with multi-core processor and video card run like a 286. Even did this after doing a fresh install of the operating system with the latest version of iTunes.
No other software does this on my machine. There has to be some crazy issue causing this.

Try this,
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
Now launch your iTunes and see if it is working now.

Download Flash Player 10.2.153.1 (not 10.3) for Windows 7, 64 bit

I would like to download Flash Player 10.2.153.1 for Windows 7 (64 bit). I have downloaded the zipped file in the archives section. However I do not know the file that I am supposed to click on to open the executable program file for Windows 7, 64 bit operating system. The downloaded file, for example, contains application files which are: _win, _win_sa, _winax. Do any of these apply? What about the updates so far (excluding 10.3) for this version?
I do not wish to download 10.3 until many of the issues have been resolved.
Many thanks.

Hi, just a bit of info. If you've already downloaded the Archived FP zip file for 10.2.153.1, then the extracted file you need for IE is 10_2r153_1_winax.exe. That is the Installer. You can check the readme.txt file, then open the folder that contains the FP platforms and you'll see it there.
Also if you've had a Flash Player version newer than that Installed, you'll need to refer to this:
Installing an Older Version: http://kb2.adobe.com/cps/402/kb402435.html
Follow the normal procedure of rebooting after Uninstalling your current version before Installing the 10.2.153.1. Then a reboot after Installing.
Thanks,
eidnolb
P.S. There would be no updates for this vs. as Flash Player "updates" by releasing a new version.
Message was edited by: eidnolb adding a P.S.

I need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help

i need the drivers for earl 2011 macbook pro 13 inch i7 4 gigs for windows 7 64 bits i tried downloading with bootcamp butt it never completes allways ends up with an error please help if any one has the drivers or knows were i can download them

Doug...
If you don't have it for reference, the manual might come in handy > US/Boot_Camp_Install-Setup.pdf
After it loads, Command + F to find information regarding the drivers.

Need a drivers (Compaq 3611au) for Windows 7 64-bit

Hi,
I've recently installed WIndows 7 64-bit ultimate edition. I'm using Compaq 3611 AU laptop. I tried to download and install drivers for Windows Vista 64-bit but it only installed Display drivers successfully. I cannot find drivers for audio and other devices. Also my DVD also stopped detected after I connnected Idea Netsetter 3G.
Can anyone send me complete driver set for Windows 7 64-bit for Compaq 3611 AU?
Thanks in advance.
Viresh
This question was solved.
View Solution.

Hi, Viresh:
I can't stay awake anymore and am going to call it a night.
I have a dv6810us that has the conexant smart audio 221 chip. I upgraded my notebook like you did to W7 64 bit.
I used this Vista 64 bit conexant audio driver from my notebook's support and driver page and it worked perfectly right from the beginning.
Give it a try, and I will read the results tomorrow. Hopefully it will have worked for you.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-63949-1&cc=us&dlc=en&lc=en&...=
Paul

Laserjet 1300 Driver for Windows 7 64 Bits

Come on HP - I need the driver for Windows 7 64 bits for my HP Laserjet 1300 series.
I installed a generic driver which works OK for some applications.
But when using my Stenograph application the box that should be printed
around the text on the printed page is NOT correct: I only see the top and left side of the box shifted by 3 inches.

rainbowdog97 wrote:
Thanks very much for replying to my message. I got PCL 5 from both places -- from the Windows Update list and from the HP website. If it helps, at the hp website it is at:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=238322&p...
You can get to it through www.hp.com/go/windows7, where I also got PCL6.
I have a lenovo thinkpad x300, and connect to the LJ1300 with a USB. I installed PCL5, for example, and tried to print a simple text. But my printer does not respond (the light doesn't start to blink), and when I use the Print function, it gives me a message that indicates "error, 1 document".
I will be off of my printer for a couple of weeks but want to be up and running soon. I had hoped installation of Windows 7 wouldn't be dramatic.
Thanks once again.
The links you cite take you to a page where there are links to:
HP Universal Print Driver for Windows PCL5 x64
HP Universal Print Driver for Windows PCL6 x64
HP Universal Print Driver for Windows PostScript x64
As the name suggests, those drivers are intended to substitute for the "real" driver that is specific to a given printer. They primarily are intended for use where a network administrator is responsible for a variety of HP printers on a single network. See http://h20338.www2.hp.com/Hpsub/cache/343033-0-0-225-121.html Personally, I found the "Universal Print Driver" impossible to install and configure. Congratulations on installing it -- even if it doesn't work.
On the same page that you linked to, there is a link under the heading "Driver" that leads to "Product Support for Windows 7." That link basically leads nowhere useful for Windows 7. The conclusion that you're led to by these pages is that the only choice for Windows 7 is one of the Universal Print Drivers. This conclusion is erroneous.
I can't reconstruct how I found it, but if you go to the link in my previous post (http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=120&prodSeriesId=...) you'll get to an HP support page for using HP printers with Win 7. Essentially, this page divides various HP printers into 6 categories and describes your options for each category:
HP and Windows 7 printer driver options available for the selected product
HP print driver available
Windows 7 print driver available
HP LaserJet AIO/MFP product options
Product will be supported
Selected product is not supported in Windows 7
The Laserjet 1300 is listed as a Category 3, which means that a driver specific to this model is built-in to Windows 7. This is not the Universal Print Driver. The catch is that the driver for the Laserjet 1300 isn't available in Windows 7 out-of-the-box (at least, that's what happened in my installation). It only shows up if you permit Windows Update to update the list of built-in printer drivers.
I suggest that you completely uninstall your LJ1300. Disconnect the LJ1300. Then, right click on its icon in Printers and Devices and select "Remove Device." Then click on any other printer listed and then click on "Print server properties" in the menu bar. Click on the Drivers tab and Remove the Universal Print Driver (or whatever else looks like it's related to the LJ1300. Uninstall anything to do with the Universal Print Driver from Control Panel > Programs > Uninstall a program.
Now, you can take one of two approaches:
What I did was just plug the printer in and turn it on. If you've managed at some point to update the list of built-in printers, Windows should just identify and install the printer like any other USB device. Otherwise, you should get a popup asking you to give permission to search the web for a driver. Grant the permission. Windows will find the correct driver and install the printer.
Alternatively, go to Devices and Printers and start the Add Printer wizard. Tell it you're installing a local printer to LPT1. You'll get to the list of built-in printer drivers. Select HP in the left pane and scroll through the right pane. If you find the PCL5 driver for the Laserjet 1300, cancel the process and then add the printer as in the paragraph above. If you don't find an entry for the Laserjet 1300, click the Windows Update button. After a couple of minutes, the process will be finished, and now when you look there will be the PCL5 driver for the Laserjet 1300. Cancel the process and add the printer as in the paragraph above.
Good luck.

What is the best anti-virus programe for windows 7 32 bit??

what is the lightest and fastest anti-virus programe for windows 7 32 bit ??
any recomendations would be appreciated
thank you :)

The issue is not how light or fast the AV software is but how effective it is in protecting your computer.
AV Software reviews:
http://www.pcmag.com/article2/0,2817,2372364,00.asp
and: http://anti-virus-software-review.toptenreviews.com/
J W Stuart: http://www.pagestart.com
Never be afraid to ask. This forum has some of the best people in the world available to help.

Hp deskjet 5940 drivers for windows xp 32 bit

hello!
who can help me find a driver for windows xp 32 bit for my hp deskjet 5940?? the drivers that you download from hp website is for xp 64 bit!
thanks
Ans

thanks for your help!
I tried this but it does not work for my windows xp 32 bit!
I have tried many a driver but I can not find anyone!
I do not know what to do ...

After Effects for Windows 7 32 bits?

Similar Messages

Maybe you are looking for