After Effects jumps some frames when i use "time reversal layer"

hi!
i'm editing a stop-motion video. i have a big problem that with AEcs5 i never had.
when i use "time reversal layer" with some image sequence layer (but also with a .mov with alpha) AE become crazy:
sometimes he erase (or jump) some frames, sometimes he put frames from other image sequence that i didn' put in the timeline!!
if u see the image there is nothing here, and appears an image that i didn't put there!!
can you help me please?
thanks!

Hi Rick, super thanks,
but i checked and all my comp are 24fps.
for your suggestion of use the time remap to invert one sequence, many thanks, i'll try!
i use the time reverse, because is good with stop motion when i whant to play with go>back>go>back
i show u the problem:
the column have to go up and down:
but when i render the video there are some frames that jump:

Similar Messages

I downloaded Yosemite 10.10.2 now my after effects (CS5.5) crashes when I use an effect. Help, please.

Here's the error message(s) that I get after I attempt to use an effect in after effects cs5.5.

You're probably simply running out of memory to run both programs at the same time and otehr things like compressed audio/ video in the project may complicate matetrs further with hardware acceleration stuff. Not much you can do, most likely beyond the usual advice of making sure all your drivers are up to date...
Mylenium

After Effects error: crash occured when invoking...

I get this error: After Effects error: crash occured when invoking rendering plugin "AE_openGL" when I have videos on the timeline and I am scrolling through them.
I run Windows Prof 7, 2.67 gigahertz Intel Core i7 920 Multi-core (4 total), 12 GBs Ram, NVIDIA GeForce 9800 GT (2x). My system is fast. I saw one suggestion to turn off openGL. How should I set up my preferences to avoid this?
Thanks.

OpenGL should work even with SLI off. Yes, you lose some performance, but for AE's limited use of these features, it should be neglectible. If for some reason you still get crashes, then you may need to push a few otehr knobs and levers in the driver settings or install a new7 different driver right away. i just cannot offer you a blanket solution that would work from a distance. OpenGL settings are delicate, so you'll have to invest some time in your own experimentation...
Mylenium

Adobe After Effects CS6 on PC when starting says...

Adobe After Effects CS6 on PC when starting says "After Effects warning: An unknown Adobe Player Engine error has occurred. Scripting will be disabled." *hits okay* "After Effects error: Crash in progress. Last logged message was: <196> <DynamicLink> <5> G:Adobe After Effects Cs6\Support Files\32\dynamiclinkmanager.exe" After this it doesn't work. PLEASE HELP!

WIthout proper system information and other details nobody can tell you anything. The unusual install location alone could be problematic...
Mylenium

CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4

CS4 I have created compositions in After Effects CS 4 but when I import them into Premiere Pro CS4 they only appear in the monitor when the play button is activated. The other clips appear without a problem. I noticed that the same situation arises when I dynamically link to Encore CS4. What am I doing wrong?

Thank you Ann. But the problem is when switched on the AE clips on the timeline are only viewable when I start the project (ie press the space bar) and as it also doesn’t appear in Encore I am afraid to spend a great deal of time creating a DVD with these clips not appearing. Any advice?
Regards and again many thanks
Stanley

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication.
I use LabVIEW to read the data from serial communication then, i open the example (.vi) from Serial Communication - Advanced Serial Write and Read from LabVIEW Example. BUT it have some error message that : Error - 1073807202 occured at property node in visa configure serial port (instr).vi -> advance serial write and read .vi
this error code is undefined. no one has provide a description for this code, or you might have wired a number that is not an error code to the error code input.
I don't know why? please help me. thank you.

When I copy that code into "Explain Error" I get: "VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded."
You may have a bad install of VISA or the wrong version of VISA loaded. Try re-installing VISA. You can get the latest version from the NI support site: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Also ensure that you are not pointing the example towards a serial port that does not exist.
Please let us know what you find and what gets this working for you.
Rob

How to access the Text Frame, when we use scrollable frame,

Hi Friends,
How to access the Text Frame, when we use scrollable frame,
Thank you,
[ Nav ]

That's the same question:
how can I access something (a page item) on a page…
Answer: you need something unique in that object you can get a handle on.
Or you use the selection a user of your script is doing and work with that selection…
A "scrollable frame" is nothing special. What it makes it a "scrollable frame" is the DPS software.
So you have to look for attached labels on the object, that identify the object for the PDS plug-in "Overlay Creator" as a "scrollable frame". That's possible with the "extractLabel("KeyString")" function. But you need to know the appropriate key-string in advance.
In another of your thread in the DPS forum, I basically answered the question how to obtain those key-strings.
When knowing the key-string you could loop through all your page items (you can skip all text frames) in the allPageItems-collection, to identify the "scrollable frame" by extracting the right label.
If you have more than one "scollable frames" you need a second unique identifier for the particular object.
That could be nearly any property.
Keep in mind, there is no "scrollableFrames" collection in the DOM !
Uwe

Adobe After Effects, Premiere and Encoder does not use the GPU (CUDA) ?

Please! Explain me. Why? Adobe After Effects, Premiere and Encoder does not use GPU (CUDA) ?
Everytime i have GPU Load from 0 to 10% !!! (GeForce GTX 970) And also my CPU load is not full. Any suggestions?

seg.48162731 wrote:
At the moment i use AE, AP and ME CC 2014 8.2 with the latest updates. I have GTX 970 and AMD 8350. What's my problem?
Which chipset is on your system's motherboard? Which motherboard is your PC equipped with?
If the motherboard is using an AMD 790 or 970 series chipset, the HyperTransport bus will be running at a reduced speed, and thus the CPU performance will be worse than a quad-core Intel i5 CPU without hyperthreading. In many instances, this means that the GPU will be laying idle, waiting for the CPU to catch up.
If on the other hand the motherboard uses an AMD 990FX chipset, then it's likely that there is something else bottlenecking your PC.

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I ha

I am having sporadic issues after new hard drive install and recovery using Time Machine. The same sluggish response, start up screen pixelating...If I reinstall Lion will it wipe out other applications? My HD was formatted and partitioned correctly, I have a late 2009 iMac.

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?

I have a WD 2 tb hard drive that I want to use to back up my Mac Pro quad core. How do I create a back up startup disk? Also, when I used Time macine, it only backed up users and not the system or library folders. Ideas?

Welcome to Apple Support Communities
Time Machine should be enough to make a backup of your files. Also, it should back up all folders, so open System Preferences > Time Machine > Options, and make sure that there are no folders included in the excluded items list.
If you want to create a bootable clone of your hard drive, you need to use an app like Carbon Copy Cloner or the Disk Utility's Restore feature > http://pondini.org/OSX/DU7.html

I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd ( bootcamp). Does anybody know why ?

I have a macbook retina with a partition of windows 7 and Yosemite. When I use time machine in Yosemite it wont recognise the macintosh HD, but it recognises the windows hd (bootcamp ). Does anybody know why ?

Please provide a bit more detail on what 'recognize' means. A screen shot is always very helpful.

After Effects are not visible when exporting in Adobe Premiere Pro CS4

I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
What is it that i'm doing wrong?
Thanks in advance!

The names are the same, but the programs are very different... CS4 is 32bit, CS5 and later is completely rewritten to be 64bit
So, there is a different forum for CS4 and earlier http://forums.adobe.com/community/premiere/premierepro_previous?view=all

After Effects are not visible when exporting in Adobe PP CS4

Hi all of you experts!
I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
What is it that i'm doing wrong?
Thanks in advance!

Thanks for your reply!
Is there any specific firmat i should export as? I have only tried as a *.AE file (which does not show on the final video) and as a *.MP4 file (whick does not have a transparent background - so i cannot use this)

After Effects, Layers change position when converting project from CC to CC 2014

When we convert some projects from CC to CC 2014 some of the layers are shifting position (both x & y).
Anyone else seeing this kind of problems?

Photoshop changed how layer bounds are calculated in some cases, which causes the Photoshop library that we include with After Effects to also have this change. We are currently working to determine how to fix this for the next update. It's tricky, because the new way that Photoshop is doing things is more correct... but it also means that projects created in previous versions look different when opened in the new version. We'll probably end up with a "legacy" option that will prevent this conversion from happening when opening old projects.

Adobe after effect cs5 automatic crashes when im starting it up

Hi
First time ever im on this forum.
Well i got a problem.
Its like whenever i start up adobe after effect its just freaking crashes.
And also 3 error windows pops up.
Heres the first one:
And i dont even know what that means.
Something on Polish.
Heres the next one:
And heres the third one:
That was all.
Also the system im using is x64 windows 7 ultimate.
And this just happend when i was making a montage and rendering it.
It was really slow so i stoped the rendering process and whosh it crashed.
It also sad that i could make an last save because adobe after effect crashed.
So any ideas?

Which format were you rendering it to? Was it a QuickTime codec?

After Effects jumps some frames when i use "time reversal layer"

Similar Messages

Maybe you are looking for