After Effects, Media Encoder and YouTube

Let's say I create a video in After Effects CC. I save the file and exit. Then, I open Media Encoder CC and open the After Effects file to render. I set the output to the default YouTube that matches the source material and start the render. When it is complete, I log into YouTube and start the upload. When I do, I get this message:
When my videos are smaller clips, this is not that large of an issue. When the video is large, though, it is a measurable difference. Is there any way to tweak the settings or am I just missing something simple? Thanks in advance.

Hi Arjun.
I have found a solution to my problem in this thread: After Installing Premiere CC Update Icons and Worksurface became too big and cannot be change in small
Thank you.
Martin

Similar Messages

After Effects, Media Encoder and Multiprocessing

I searched but only found something related to Red Giant plugins.
Simple question: How can you force AME to use multiprocessing? You know, the little box in AE that says "Render Multiple Frames Simultaneously."
When I render in AME it uses 50% of each core. When I render with it checked on in AE, it renders all 16 cores at 100%. And the time difference is about the same--twice as fast with it checked. I know some projects don't fair as well, but I have about 20 I need to render out from various projects and they all benefit from this feature. I want to render them all in AME as opposed to onesy-twosy.

Thanks Dave.
I see where you're going with this. So I take it AME won't use my multiprocessor settings from AE just like CS5.0?
Perhaps I should throw in the "rest of the story." It might help.
I have a new 32-core/64GB machine that I want to treat as a render slave. There are two of us working on different AE projects all day. Sometimes we need to render out 10+ projects during the day. I would like to use AME for us to drop our renders on the monster computer's queue as we finish them. The render machine would just hit them in the order they come, and in the mean time freeing up our working machines. It's not as clean as I presented it in the opening post. There ARE 20 projects at times to render, but they're not all neatly packaged, ready to go out to render. It's more like a few an hour are ready to go, but all need to be done by the end of the day (or beginning of next... but if we don't start them in the order that they are ready, they won't all be ready by the next day).
I guess what I was trying to accomplish was a way to just drop projects onto without having to stop any current renders AND be able to keep plugging away on new projects.
After doing some testing, the majority of our projects really benefit from multicore rendering (1:00 hr vs. 2:00 types of benefits).

When or is it possible that Media Encoder and Encore will get GTX 680 CUDA support?

...and will it really make a difference?
Ive got the Creative Cloud deal, so my software is up to date (CS6) as of 8/16/12, and after installing my new GTX 680 4GB card and enabling it in Premiere and After Effects, I see a nice performance gain over my older GTX 550 ti 1.5GB.
When I drop a finished H.264 Blu-ray file into a sequence and export it from Premiere into AME, my graphics card shows about 40-60% regular usage throughout the encoding, no matter what format I am exporting to. But if I just drop the same original H.264 file into AME and set it to the exact same encode output preset, then the graphics card is not used at all.
Also, when you run GPUSniffer in the Encore program folder, you can see that it will not accept this card for GPU utilization. Ive looked all around for the Encore list of cards database it is pulling from, and Ive concluded that it must be in a compiled DLL file, so unlike Premiere, you cant modify it to detect the GPU. AME does not have either the list of supported cards or the GPUSniffer program in its program folder, so both of these programs will need the GTX 680 added to its list of supported cards by Adobe directly with an update, like they did with After Effects CS6.
I can only imagine that transcoding in either programs would benefit from CUDA accelleration, like a few other transcoding apps out there already use.
If Adobe is listening, the #1 thing I (all of us?) want in CS6 is for all transcoding products (Premiere direct export & projects, After Effects, Media Encoder direct file import, Encore) to utilize GTX 670 680 and 690 cards for accelleration out of the box. I dont want to use some 3rd party transcoder to get GPU aided transcoding, I want my CS6 Master Collection to be able to do it. Not too much to ask right?

Hi, I have written a 'proof-of-concept' (i.e. unsupported beta) NVidia H264-encoder plugin for Adobe Premeire Pro CS6. If you are interested in trying it, go the following forum-post:http://forums.adobe.com/message/5458381
Couple of notes:
(0) GPU requirement: NVidia "Kepler" GPU or later (desktop GTX650 or higher, laptop GT650M or higher.) The plugin uses the new dedicated hardware-encoder (NVENC) introduced with the 2012 Kepler GPU.
(1) the "ideal" best-case speedup (over Mainconcept H264) is roughly 4-5x on a consumer desktop PC (single-socket PC, Intel i5-3570K). Naturally actual results vary on the source-video/render.
(2) Interlaced video encoding is NOT supported. (I couldn't get this to work; I think it's a GPU-driver issue.)
(3) Only uncompressed PCM-audio is supported (no AAC/AC-3 audio.) Also, multiplexing is limited to MPEG-2 TS. If you want to generate *.MP4 files, you'll need to do your own offline postprocessing outside of Adobe.
(4) In terms of picture-quality (artifacts, compression efficiency), NVidia hardware (GPU) encoding is still inferior to software-only solutions (such as Mainconcept or x264.)
In short, don't expect the NVENC-plugin to replace software-encoding any time soon. It's not a production-quality product. And even if it were, software-encoding still has a place in a real workflow; until consumer hardware-GPU encoding can match the video-quality of the Mainconcept encoder, you'll still be using Mainconcept to do your final production video renders.
cuda is meant for general computing including encoding.
if you performe h246 encoding using cuda on gtx680 it can be done 1 minutes for a video that takes 90 minutes on i7 cpu.
At that speed, the output of the hardware-encoder would be so poor, the video may as well be disposable. NVENC is NOT faster than Intel Quicksync; actually Quicksync can be substantially faster. But NVENC (currently) holds the slight edge in compression-quality.
Off on a tangent, CUDA in MPE acceleration offers both speed-advantage and quality-advantage, because the CUDA video-frame processing is highly parallelizable, and can exploit the GPU's numerous floating-point computational-arrays to speed-up processing and do more complex processing. That's a double-win. So what does this have to do with encoding? Right now, hardware video-encoding (which comes after the video-rendering step) only offers improved speed. My experience with NVENC has shown me it does not improved video-quality. At best, it is comparable to good (and slower) software-encoding when allowed high video-bitrates. At lower video-bitrates (such as Youtube streaming), software-encoding is still A LOT better.

Premiere CC 7.2.2 crashes when trying to export via Media Encoder and Encore crashes while DVD build

Hello,
My computer is a:
2x Intel Xeon Processor E5-2650 (2000 MHz, 20MB);
16x Kingston DIMM 8 GB PC3-8500 ECC Reg.;
PNY Quadro 4000 with 2048 MB GDDR5-RAM;
PNY Tesla C 2075
2x 2000 GB Western Digital RE4 (7200 UPM/S-ATA II) as a RAID I
1x 120 GB OCZ Vertex 3 SSD
1x 240 GB OCZ Vertex 3 SSD (system disk)
Tyan S7050GM4NR motherboard
Windows 7
I freshly installed Windows 7 and the CC-Apps PremierePro, After Effects, Media Encoder, Photoshop and Speedgrade.
When I try to export any video from premiere to the media encoder premiere crashes without any error message. The problem is not the project: I created several new projects and even if I only have one Graphic-File/Bars/h264-video in the timeline that I try to export: premiere crashes. When I export directly from premiere it works, but there is no chance to go via media encoder. The strange thing is that I can export from after effects to the media encoder without any problem...
Second Problem: Encore crashes also. Everytime I try to build a DVD => Encore crashes
Does anybody have an idea?
Here is what I already tried:
Yesterday it worked fine today it crashes when I export from premiere via media encoder.
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. I used Software only renderer => crash
This is the Windows log that I found:
Ereignis-ID 1000
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.

The Error is back!!!
Yesterday it worked today it crashes when I export from premiere via media encoder. I tried it with all the things you told me:
1. Bars+Tone => export => crash
2. Video Project with 2 short h264-files => export => crash
3. Software only renderer => crash
These are the two logs that I found:
Ereignis-ID 1000
Die Leistungsindikatoren für den Dienst WmiApRpl (WmiApRpl) wurden erfolgreich geladen. Die Eintragsdaten im Datenbereich enthalten die neuen Indexwerte, die diesem Dienst zugeordnet sind.
System
Provider
[ Name]
Microsoft-Windows-LoadPerf
[ Guid]
{122EE297-BB47-41AE-B265-1CA8D1886D40}
EventID
1000
Version
0
Level
4
Task
0
Opcode
0
Keywords
0x8000000000000000
TimeCreated
[ SystemTime]
2014-04-16T08:25:51.922502600Z
EventRecordID
3402
Correlation
Execution
[ ProcessID]
19984
[ ThreadID]
24964
Channel
Application
Computer
Schnittplatz
Security
[ UserID]
S-1-5-18
UserData
EventXML
param1
WmiApRpl
param2
WmiApRpl
binaryDataSize
16
binaryData
38270000DE27000039270000DF270000
So it would be great if you have any idea what to do...

Importing video into After effects, premiere pro and media encoder result in freezing

I have been trying to import a 17 minute long mp4 video shot with a go-pro into after effects and premiere pro with the result of the program locking up each time. My next thought was try to import it into media encoder and change the file format but it is causing media encoder to lock up as well. Any thoughts would be sincerely appreciated

Sounds like something might be fishy with the video file. You might try converting with different software, which can often be more forgiving than Adobe tools.
XviD4PSP 5.10.346 / 7.0.124 Beta
XMedia Recode 3.2.2.7

Exporting to Media Encoder and file locating issue

Ok, Now I've read a LOT of threads trying to find a solution to this but none of them have answered my problem exactly, so here's what I have:
Running a New computer with a clean install of Windows 7 64 bit and Adobe CS4 Master Suite
Hardware:
Dell Precision M6400
Intel(R) Core(TM)2 Duo CPU T9900 @ 3.06 Ghz, 3.07 Ghz
12.0 GB Ram
Premiere ran fine for a while, but soon I've run into a problem where I try to export to the Media Encoder and I keep getting the error:
"Could not read from the source. Please check if it has moved or been deleted" over and over
I have deleted recently imported media one at a time to try and locate what's causing it since it wasn't doing this before, but no luck. So I restarted the program but now the Premiere project won't open. The task bar loads until about 2/3 in and stops there indefinitely, I've left and came back to it 2 hours later and it hadn't moved. I back tracked and found a previous save that will open, but it still will not export, it still says "Could not read from the source. Please check if it has moved or been deleted". And as soon as I update anything and save a new file that one will not open either.
I've tried recompressing each video file into a format I know works well with Premiere but still no difference.
This problem has plagued my workflow for a while now and I can't take it anymore. I've had to restart clean project files to try to work around it but I lose so much progress, and the work around by rendering the premiere file through After effects hasn't worked either. The error I get there says "Dynamic link server is busy".
Here's what the problem is not: It is not because I uninstalled CS3 or any other previous version, I've never had it on this computer. It's not a plugin problem, I don't have any plugins on this install except for the default ones that Came with Adobe Master Suite for Premiere Pro.
Someone please help me, this is ridiculous that I have had to trouble shoot the program this much. Both CS4 and Windows 7 have been around for over a year now and neither are in Beta Editions

Wow, sorry, forgive me if I've seen most forums work with a lot less, and your dismissiveness led me to assume you hadn't read my post.
All of this is new and up do date as far as Adobe and Windows updates go, that's Version 4.2.1.
My projects for this are all in NTSC Widescreen DV 24P, the particular sequence that I render from is in that format as well, although regardless of which one I use the problem keeps occurring.
My renders for my recent purposes have been compressed in .h264, IPOD video Large. The codec I'm rendering in also doesn't seem to matter, because I've tried this in .avi., .mov, .h264, .wav, etc. and all with various settings that I thought might help, but the encoder quits encoding 4 seconds in and gives me the error that it can't find the media.
And I didn't mention the media type and what not because it seems irrelevent of what I use this problem keeps happening. I'm pretty sure it's a problem with the project file or perhaps the media encoder or both.
And I don't know what you mean by "disks"
Do I have a Raid set up on my hard disk? No, I have two 0.5 TB hard drives, Programs on one (C:\) Projects on the other (D:\).
What address am I saving the scratch disks to? I use the default of "same as Project". Have I tried Clearing it? Yes.
I don't think I'm getting at what you're asking.
And I don't think I've ever used an .xlsm (which is excel?) file and I've definitely never used a Power point project (PPS?) file in my projects. And they open in their respective programs, although I'm not sure why you asked about that. Again I'm not sure I know what you mean.
The Premiere Project (.prproj) file is what I'm trying to open when the progress bar stops at 2/3 the way through and forces me to terminate the process with the task manager to close it.
It would help to mention that all my projects are animated and I use premiere to cobble them together, so no problems that relate to transferring media from a camera to the computer would apply here. Most of the files I get out of Maya are in Default .avi or .mov files, and I also use a handful of .wav files for the dialogue and .jpgs for cards and placeholders.
I believe that this problem began when I updated a few of the files in my project, but I've been doing that for weeks without incident. I've been updating them by saving over the old media file with the updated one of the same name, length, and type.
I don't work exclusively with Premiere, in fact it's not what I usually use, that would be Final Cut Pro.

After Effects 7.0 and Quicktime Plugin Conflict

Hello "forum-ers",
I'm using Adobe After Effects 7.0, and i've created a video in the same.I want to use this video in Adobe Flash CS3.Neither the flv nor the Quicktime formats are available in the render queue options.I presume its because i do not have Quicktime installed.But if i try to install Quicktime, AE wouldn't load.It displays a message, error while loading plug-in "Scripting", and then crashes.So, i guess there's a shared plugin somewhere in between the two.
So if i use QT,i cant open AE.If i use AE,i cant save in QT.Similar problem lies in Flash, and its CS3 Encoder.Without installing QT, it displays a message : install DirectShow 9 "and" Quicktime 7.
Any help appreciated!
Many Thankx,

I'm sorry to hear that. Sounds like something is severely mixed up on your system. Do you by any chance use some widget-y system extensions? Users have reported some funny things going on when e.g. MenuMaster or specific news feed widgets are installed. In any case, since for the time being you seem to be stuck with no QT in AE, you should work with TIFF files and PSDs. Both formats are reasonably compressed (for TIFF, enable the LZW option), support 16bpc and they are handled by native Adobe loaders/ savers, which should eliminate any potential interference side effects from your defunct QT routines. In addition, TIFFs can play almost realtime in AE just like some QT CoDecs, which helps when scrubbing through a complex project.
Mylenium

FEATURE REQUEST: After Effects style Placeholders and Proxies

If you feel the needs in efficient proxy workflow, welcome to the club and don't hesitate to submit feature request.
Here is the adjusted to less than 2000 symbols feature request text:
***After Effects style Placeholders and Proxies***
It would be nice if PrPro offered AE style Placeholders and Proxies workflow. There are cases, where they are extremely useful, e.g.:
1. Huge modern formats and resource hungry codecs. Not all machines can easily handle 2k or 4k footages, some can't get real time playback even with AVCHD. Not to mention that CinemaDNG importer was discontinued partly because of inability to get real time playback in PrPro. The issue can be resolved via rendering previews, but that's not always the most efficient workflow.
2. In multicam editing issues mentioned above increase dramatically. Rendering preview for every camera angle is simply impossible. Although PrPro offers offline clips workflow, an editor can't easily see if the clip is currently linked to a source footage or a proxy, and switching between sources and proxies involves several steps every time one needs to switch: selecting assets, making them offline, right-clicking again to link to other media, locating files on a disk; while in After Effects it's just one click once a proxy is set.
3. Adobe Dynamic Link. PrPro communicates with AE projects via single instance of headless AE, which creates a bottleneck and entails the need to render DI for complex comps. Although AE allows to set DIs as proxies and, hence, enjoy the best of both worlds, instantly switching between DI and dynamically linked comp and no needs to replace anything in PrPro timeline, with hundreds of dynamically linked comps PrPro timeline becomes unresponsive and takes forever to render (for my rig test 30 min sequence built out of 935 dynamically linked comps, which are just source footages in their own comps, hence, the equivalent to rendered DIs set to proxies, takes around 27 hours to render, while 30 min sequence built out of the same 935 source footages renders in real time). Meanwhile, PrPro doesn't currently allow to link offline dynamically linked comps to rendered DIs.

As the person who maintains the feature request database for After Effects, I can confirm that the number of times an item has been requested is a major factor when we consider what to work on next. So are other factors, such as how hard the feature is to implement and maintain, how much testing is involved (often the larger concern than programming time), whether the request conflicts with something else that we are already working on, and so on. It is true that we consider not just raw numbers of requests but the details of who is making the requests---e.g., whether the requests are coming from animators or compositors, beginners or experts.
I can only speak for the After Effects team, but the Premiere Pro team works much the same way (which is unsurprising, since we are in the same group and have overlapping team members).
We also try to give some visibility into the most requested items with posts like this:
http://blogs.adobe.com/aftereffects/2012/12/top-feature-requests-for-after-effects-in-2012 .html

After Effects Issue uploading to Youtube - Screen Resolution

Hi All
I've been struggling lately trying to get my set of youtube videos to appear at the proper resolution and ideally fullscreen without the black bars at the side.
Youtubes recommended sizes:
1080p: 1920x1080
720p: 1280x720
480p: 854x480
360p: 640x360
240p: 426x240
My original videos are recorded in 1280x1024 which is what my screen resolution is set to, when I drop these videos into AE i set the comp size to 1280x1024 and i get a normal correct sized video. However when i render it out and upload it to the site I am given black bars down the side of the video and it does not appear full screen. (The quality is not great either if you do go fullscreen mode in the player - but the bars remain)
Now youtube state this is fine and works ok but as a personal preference i'd just like the video to fit the player.
but your not rendering at the recommended settings I hear you say; well, when I change the comp setting to 1280x720 i lose the top of my video and I am stuck as to how to fix it. Is the issue i'm having to do with the original video size, should i change resolution and record at 1280x720 (i dont have a widescreen) or is there a way around this in AE? I hope its not as easy as just scaling the video down in AE and forcing it to fit, something just feels wrong when I do that.
i would apprecaite any help! I really would.
Simon
(Additional - Recorded at 30FPS and Output in H.284

You should be using the YouTube HD preset in the Adobe Media Encoder and your comps should be either standard HD 1080p or 720p. No matter what you upload to YouTube they will process the footage and set up the other resolution options.
The important thing here is that youTube videos are either 16X9 or 4X3. Anything not at that picture aspect will end up with black borders at the top or on the sides. There is absolutely no way to override this. It cannot be done. The only way you can provide non standard video frame sizes to the public over the Internet is to use a codec that supports odd frame sizes and load it on your own server. All streaming services have standards and they are the same frame size.
If you want to see your entire screen capture then you should either set your screen resolution to 1920 X 1080 and capture that or simply scale your screen capture footage or project so that it will fit into a standard HD comp.
Saving a few KB in file size is not what you are looking for. The best picture and sound quality you can get in a streaming format is. That can only be achieved using the Adobe Media Encoder. The YouTube Presets are already optomized for the best you can get with this software for this delivery format. There is no need to re-invent anything. Just use the presets.

Questions About CS5 Premiere, Media Encoder, and Encore

I've just started using Adobe CS5 and have noticed several issues that preplex
me:
1. I edit a video clip in Premiere and put it into the que for Adobe Media Encoder to convert. The input file in Premiere is an HD MPG2 file. I've set the file output to be Blu-ray AVCHD with AC-3. After Adobe Media Encoder finishes converting the file, the time lengts of the video (M4V) and audio (AC3) do not match. They usually differ by 2 to 6 seconds. This causes video/audio sync problems when brought into Encore.
2. Some files that I que into Media Encoder from Premiere state that "Rendering media." I proceed with the conversion and every thing seems OK except it's not. When these files are brought into Encore, the first part of the files produce the same message. It seems that this part of the file is never rendered.
3. I had 250 gb available on my system drive before I started using Adobe CS5 but that free space quickly disappeared. I did learn how to clean up the cache mannually. It would seem that Adobe could do this automatically.
Any suggestions?

Please repost in the Premiere forum. This forum is for general suite-wide issues, generally relating to installation.

After Effects CS6: Cache and Reload Footage Problem

After Effects CS6: Cache and Reload Footage Problem
I am having trouble getting my footage to update in an AE project.
In an existing project, there is an image sequence in a composition. I have saved and closed AE, modified the footage (same dimensions and qty. of frames, only the pixel data changes), and then re-launched AE and opened the project. Though I have changed the footage, the old content still appears.
To resolve this, I have done the following:
Edit>Purge>All Memory
Edit>Purge>Image Cache Memory
Edit>Preferences>Media & Disk Cache>Empty Disk Cache
Edit>Preferences>Media & Disk Cache>Clean Database & Cache
From the Project window I've selected all footage and selected Reload
None of these got the footage to update. I could double-click on the footage in the project bin and scrub the play head and the old footage was still displayed.
Finally I had to replace the footage with itself and that resolved the issue.
If this is operator error, lack of understanding the cache functions, or something else, I'd appreciate some assistance. I don't recall this behavior in CS 5.5, so I am guessing this is a change in CS 6.
Win 7 Pro 64bit Service Pack 1
Intel Xeon CPU X5450 @ 3.00 GHz 2.99 GHz
RAM 20 GB

about Illustrator and Photoshop files in CS6 especially - you should work with Ctrl/Cmd+E (Edit Original).
when in Ae and you want to change a source file, use this command on one of the layers
from the source file you wish to change (doesn't matter if its in the timeline or project window) and
your original software linked to that file will open.
when you work this way you make AE reload that file and any change after that will be seen back in AE immediately.
it is also very convenient way to work because there can be no confusion on which file you are on
if you work with multiple source files for example.
even if you made the change with your Photoshop/Illustrator opened file and got back to Ae
and didn't see any change - press on one of the layers Ctrl/Cmd+E and this will refresh it immediately.
This is the case in CS6.
in CC I have noticed that any change I make is refreshed immediately in Ae as if it rechecks the changes all the time,
and didn't even need to use Ctrl/Cmd+E but it's a good habit all the same.
didn't come across a case where that didn't work for be but
if all fails you could always change the folder location of the file, let Ae lose it, then replace footage of the file,
and thus let Ae re-link it back.

Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of

if you can help me please alguin
Adobe Creative Cloud because I do not get After Effects among others but I try to install software from the page but I give After Effects download shareware and says downloading but nothing comes give him retrying but nothing even leave the application of Adobe Creative but nothing help

Without proper system info and otehr technical details nobody can tell you anything.
Mylenium

After Effects 7.0 and OSX

Hi Gang
Happy Holidays!
I may have asked this question before, and so it's probably old news.
I'm still using After Effects 7.0, and Photoshop 7.0 - I can't afford the current suite packages. My current software works fine.
I'm also still using 10.4.11 - I don't believe any of these programs are compatible in Leopard, 10.5 - Correct?
Thank you
Mike Fraticelli
http://vimeo.com/7340608

I'm still using After Effects 7.0, and Photoshop 7.0 - I can't afford the current suite packages. My current software works fine.
Don't touch anything. Don't upgrade anything. Just keep doin' what you're doin'.
This also implies that you can't take advantage that newfangled mp4/H.264/ RED video, DSLR video footage, or any new software requiring a 64-bit OS. You're kind of stuck in the days of George Dubya Bush's first first term in office.
Condoleeza Rice, anyone?

If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

If I purchase or subscribe to creative cloud, will this include adobe premiere pro, after effects, photoshop, illustrator and audition?

Here is a link to a page that shows all of the Cloud applications...
All Cloud Applications: http://www.adobe.com/creativecloud/catalog/desktop.html

My name is dagur i downloaded the adobe after effects cc trial and i dont know how to licence it?

My name is dagur i downloaded the adobe after effects cc trial and i dont know how to licence it? and i live in iceland is it even posible to get it here?

You pay for a Cloud account (if possible in your country) and the program is activated when you log in to your paid Cloud account
http://www.adobe.com/products/creativecloud/faq.html
http://helpx.adobe.com/creative-cloud/help/install-apps.html
Cloud Plans https://www.adobe.com/products/creativecloud/buying-guide.html
http://forums.adobe.com/community/download_install_setup/creative_cloud_faq
what is http://helpx.adobe.com/creative-cloud/help/creative-cloud-desktop.html
Cloud Getting Started https://helpx.adobe.com/creative-cloud/topics/getting-started.html

After Effects, Media Encoder and YouTube

Similar Messages

Maybe you are looking for