After Effects & Premiere - workflow

Hi
I am editing a film in premiere CS 5 - the footage is RED. Motion Graphics and Compositors are using After Effects. Will Premiere be able to open After effects projects (with all effects and layers intact)? So I can do the final edit.
Not very familiar with After Effects - so wondering if tracking, roto, masking, layering etc done in After Effects will be preserved when the After effects Project is opened in Premiere.
Thanks in advance.

My five pennies to this question given in AE Forum.

Similar Messages

After Effects Premiere Photoshop UND UND UND

suche ab mai/juni 2002 nach abschluss meiner diplomarbeit im raum hannover/hamburg einen job im beeich digitale bildbearbeitung/videodesign etc.
hervorragende kenntnisse in photoshop, after effects, premiere, indesign, illustrator, dvd-authoring etc. langjährige hiwi-tätigkeit am regionalen rechenzentrum niedersachsen im bereich videodesign und dvd-authoring, arbeit als videokünstler und freier grafiker.
mfg
thomas oppelt

Hallo,
ich produziere ab-und-zumal Trickfilme und wir arbeiten hauptsächlich mit After-Effects,Photoshop und Premiere.
Falls Interesse, kannst du mich unter
[email protected] kontaktieren.
mfg.

After Effects & Premiere doesn't recognize AAM

Hello,
I recently downloaded Adobe After Effects & Premiere from creative cloud and they doesn't recognize AAM.
When I open them they say "Adobe Application Manager , required to run your product, is missing or damaged...".
I tried to reinstall AAM but still no hope.
Please help me

Hi David,
Please download and install the Adobe application manager from the link below:
WIN: Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
MAC: Adobe - Adobe Application Manager : For Macintosh : Adobe Application Manager
Regards,
Sheena

Encore.Prelude.After Effects.Premiere.Media Encoder CS6 立ち上がらない

Encore、Prelude、After Effects、Premiere、Media Encoder　CS6 が立ち上がりません。
PCのOSはこの通りです。
Dreamweaver、Flash、Illustrator、Photoshop、Fireworks、Auditionは立ち上がります。
普通に使えます。
立ち上がらないソフトは、起動しようとアイコンをクリックして、モニタ中央に起動している最中のグラフィックスが
現れると、そのままの状態になってしまいます。
（応答なし）になるので、毎回強制終了しています。
今まで１年以上普通に使ってきて突然こうなりました。
原因が分かりません。
こちらで行った解決策は以下の通りです
①
アンインストーラーを使用して、アンインストールし、そのごすべてのアプリを戻しましたが
アンインストール以前と同じ状態です。
②
macOS再インストール
ローカルのデータをすべて削除して再びインストールしました
しかし、同じくたちあがるソフトとそうではないソフトがあります
どこに問題があるのか、わからない状態で困っています。
なにとぞご回答よろしくおねがいいたします。

再度の再インストールが必要になりますが、Cleaner Toolを使ってみては如何でしょうか。
CC Cleaner Tool を使用してインストールに関する問題を解決 | CC、CS3-CS6

Adobe After Effects/Premiere to FCE HD

I have one of the new Intel iMacs (new mac user) and I was thinking about getting the new FCE when they make it Universal. I was wondering if anyone knows whether I will feel at home with FCE being an Adobe After Effects/Premiere user. Are they similar?

I came to FCE, in August, from Premiere 6.5.
There were enough basic similarities to make the transition reasonably painless. (For people transferring from iMovie, it is a much harder proposition).
However, plenty of help is still needed and I found this forum and Tom's book almost indispensable. You can get details of it here:-
http://www.fcpbook.com/FCE2%20Editing%20Workshop.html
Whether this book (which is suitable for FCE 2 and 3) will be OK for the new binary version - I don't know. If it isn't I am sure that Tom will do the decent thing and produce an updated version in the near future!
Ian.

Adobe After Effects, Premiere and Encoder does not use the GPU (CUDA) ?

Please! Explain me. Why? Adobe After Effects, Premiere and Encoder does not use GPU (CUDA) ?
Everytime i have GPU Load from 0 to 10% !!! (GeForce GTX 970) And also my CPU load is not full. Any suggestions?

seg.48162731 wrote:
At the moment i use AE, AP and ME CC 2014 8.2 with the latest updates. I have GTX 970 and AMD 8350. What's my problem?
Which chipset is on your system's motherboard? Which motherboard is your PC equipped with?
If the motherboard is using an AMD 790 or 970 series chipset, the HyperTransport bus will be running at a reduced speed, and thus the CPU performance will be worse than a quad-core Intel i5 CPU without hyperthreading. In many instances, this means that the GPU will be laying idle, waiting for the CPU to catch up.
If on the other hand the motherboard uses an AMD 990FX chipset, then it's likely that there is something else bottlenecking your PC.

After effects / Premiere CS5 64bit

After effects / Premiere CS5 64bit unable to load. It's giving me error "runtime error this application has requested the Runtime...."
I've exhausted all possible options and i'm quite frustrated right now. I've reinstalled my Win 7 64 bit and reinstalled the application numerous times however the same fault keeps on happening.
I've reinstalled new drivers for my GeForce 8400 GS. still no help. Please help! Others which is running 32 bit (flash, fireworks, dreamweaver....) is working fine. Only those which is 64 bit, premiere, after effects is giving me this error. Please help me.

Erm...
GeForce 8400 GS
Highly doubtful this card is usable in any way much less certified by Adobe - not only is it old to begin with, but it's also one of those trimemd down models from the budget tray. It might at best work, if you removed OpenGL support from AE compeltely, but Premiere will remain problematic. Also this seems like a clear indicator that your computer is 5 years or older and in that case, your processor may simply not be compatible which would apply to several Core2Duo types, some AMD processors and Pentium 4. If you think your processor is compatible regardless, then it may need a special driver/ patch/ DLL, so check and install that...
Mylenium

Premiere to After Effects Composition workflow with Subclips?

I have a bunch of footage, each about 1 minute-long, that I'm cutting in Premier into a collection of 3-second highlight shots. What I want to do is take some of those 3 second clips and add a couple of effects in AE.
Problem #1:
When I select the trimmed shot in Premiere and select "Replace with After Effects Composition", all I get is a blank composition that is 1 minute long (not 3 seconds like how I trimmed it in the Premiere sequence editor).
Problem #2:
What I did to resolve the issue above is select the trimmed clip, then created a Subclip of it. Then when I selected "Replace with After Effects Composition" it then created a blank composition in AE that was 3 seconds long.
Ok fine, but that still doesn't resolve the blank AE composition. It will be super tedious to import each of the 1-minute footage files into AE and then re-find the 3 second section I already set in Premiere. Am I missing a step somewhere? How do I get After Effects to import that subclip automatically into the library? I tried to export the subclip from Premiere but couldn't find that option.
Is there a better workflow for what I'm trying to do?
Thanks!

I'm using DSLR footage and am not running into this issue. However, another workaround you could do is, copy the trimmed/subcliped clip and paste it into AE. To get a sequence in AE to conform to the durration of the copied clip, use otp+command+v. I use this in replace of dynamic link, and works quite well. Hope that helps.

Problems with After Effects/Premiere CS3 in Vista

I have read through a bundle of solutions to this problem and haven't found anything that has worked yet. I ran After Effects and Premiere Pro on Vista up until two days ago when it refused to open. When I try to open Premiere, it gives the message "Sorry, a serious error has occurred that requires Adobe Premiere Pro to shut down. We will attemp to save your current project." When I tryo to open After Effects, the firts try does nothing. The second attempt will open After Effects, but all interfaces are missing and all the dropdown menus are grayed out. When I close it, it says After Effects has crashed, contact support, error 0:42. I have uninstalled/deactivated and reinstalled, run codec sniper, removed xmi preference settings and nothing works. Does anyone have any suggestions?

Did you run the CS3 Clean Script? If not, please do so before attempting any reinstalls. More info on such stuff here and here.
Mylenium

GTX Titan in After Effects & Premiere CS6

GTX Titan Superclocked now running in OS X 10.8.3 using the latest NVIDIA Web Driver (313.01.01f03) and CUDA Driver Version 5.0.59.
I've modified both the "cuda_supported_cards.txt" file for Premiere Pro CS6 (6.0.2) and the "raytracer_supported_cards.txt" file for After Effects CS 6 (11.0.2) to include the "GeForce GTX TITAN."
Premiere recognizes the card fine and is able to leverage the Titan for it's Mercury Playback Engine GPU Acceleration (CUDA). However, After Effects reports the following error when starting up:
After Effects error: Ray-traced 3D: Initial shader compile failed (5070 :: 0)
Mylenium discusses the error in detail here:
http://myleniumerrors.com/2013/01/06/5070-0-3/
Removing the "GeForce GTX TITAN" from the "raytracer_supported_cards.txt" file resolves the error message, however, this obviously renders the Titan useless for any ray-traced acceleration using the Titan.
Any thoughts on why After Effects is reporting this error (even though Premiere is capable of enabling CUDA with the Titan) and what the solution might be?
One final note, even with the startup error, After Effects successfully reports the GTX Titan under GPU Information (see attached image below)

I agree with the above. Couple things I would add:
-1200W PSU should be good for nearly all systems, unless you are running 6+ HDD and multiple GPUs. The titan is actually very energy efficient for its speed
- IF going the overclocked 3930K route, I'd suggest the corsair HAF100 closed loop water CPU cooler, at a minimum.
- Coolermaster and thermaltake both make great cases. Airflow is very important.
- Also I have found in previous builds that 128 GB SSD for OS is not enough, it gets full very quickly. Personally, I'd recommend at least 256 for SSD overheard, especially if you want to install full Adobe CC suite + multiple 3D apps and programs.
- don't forget data backup is very important, especially when using RAIDS for projects, as they are not super stable and can have disk failures - you can get a cheap external 2-4 TB USB 3.0 drive for pretty cheap. It will save your life one day
- Definitely look into the red rocket PCI card. if you can afford it. Much better use of your money for editing red than another titan, or xeon chips.

After Effect / Premiere Pro CC 2014 Video Importing Conflicts

Why are my Adobe software packages not cooperating? PRes imported out of AE and into PPRO, but no die? Why?
Today I have a brand new MacBook Pro, I also have Adobe CC installed, predominantly for PremierePro and After Effects.
First issue - With ProRes video files exported successfully from Davinci Resolve not being imported into AE. After a few hours of failed attempts, head scratching and searching online I found I had to delete certain files from the hard drive / Quicktime folder (DVCPROHDCodec.component / ApplDVCPROHDCodec.compnent / etc) It seems now that AE has these codecs packaged into the application (?)
Anyway this worked! And I was able to import files in without 'after effects 86. error 4. reading file from frame'. Popping up endlessly.
Second issue - I work on an AE composition & try to export as a PremierPro file from AE, this works and I open with Premire Pro, but some video files on the timeline are missing (?)
So I decide to go the long route and export the composition as a single clip at ProRes from After Effects. I attempt to bring this clip into Premiere Pro and I get another error 'The importer reported a generic error'.
This is highly frustrating, I want to know what Adobe are doing to provide the relevant support for us enthusiastic movie makers and editors. I seem to spend most of my time trying to get my software packages working
with one another than making creative content and this really is unproductive and irritating, especially since these softwares are from the same company.

Go to HD/Library/Quictime and delete all .component files. It appears that the correct procedure is to delete all QT components and everything so far works. I have to do this every time I run after effects or Premiere Pro, and remember to put them back in again after shutting down software. Any ideas why this is happening folks?

After Effects & Premiere CS5 HELP!

I purchased Adobe CS5 Master Collection through my work. IT was already opened when I got it. When I installed it every program was there to install except After Effects and Premiere. This was on my macbook pro duel cor 2.16 running snow leopard.
When I installed another copy for my pc the programs showed up but had a message saying I needed to update to run.
Why would they not even show up in the" install options window" on apple???
Isn't it true Adobe had after effects cs4 and premiere cs4 on the install cd if cs5 wouldn't run?
Thanks
-B

"In response to stevevance- the Intel Core system requirements you listed are only for a PC. For a mac all it says is that we need a multicore Intel processor with a 64-bit support, and I think all Macs automatically run 64-bit."
I believe you are mistaken Katherine and therein lies your problem, the Intel Core Duo is a 32-bit processor. Requirements for CS5 Premier and After Effects are a 64-bit processor... while the Macbook Pro with Intel Core Duo's can run 64-bit programs, they run them at 32-bit, After Effects and Premier require to be run at 64-bit and cannot be run on a 32-bit processor. Such is the case with Intel Core Duo's which are 32-bit. While you are correct when saying "all Macs automatically run 64-bit." they run 64-bit programs yes, but After Effects and Premier CS5 require the 64-bit processor. Any Mac with all the system requirements but is missing the 64-bit processor will not be able to see the install option to install Premier and After Effects CS5.
My MacBook Pro 17" (fully upgraded) with Intel Core Duo was unable to see the installation selection. But my recently acquired MacBook Pro 15" with intel i7 core was able to see the installation selection. Intel Core Duo = 32-bit.... Intel i7 Core = 64-bit

After Effects & Premiere Pro CS4 users: Turn off "Make text and other items larger or smaller" (Win)

I just made a brief blog post recommending that After Effects CS4 and Premiere Pro CS4 users turn off the "Make text and other items larger or smaller" setting in Windows 7, since it causes some problems.
Please use this thread to let us know whether this solved a problem for you or whether there are any problems with this solution.

There isn't really an option to "turn off" the feature. Do you mean to say that it should be set to "Smaller - 100% (default)"?

After effects & Premiere Pro CC problems -HELP-

Hi everyone,
I'm having some slight issues with after effects and adobe premiere CS6 CC on my notebook.
I downloaded the CC and can install all the apps, and every app (photoshop, illustrator, mediaencoder etc all work.
My notebook specs:
8GB ram
Nvidia 840M
(It says there is an integrated graphics aswell, maybe this could be the issue? that AE and Premiere select this one instead of the 840M)
Samsung evo 250GB SSD (Bootup drive and this is where CC is installed)
500GB HDD 7200rpm
For after effects:
When I run AE it starts the loading screen, but it crashes almost right away when it says "Initializing Mediacore" and gives this error:
After Effects error: Crash in progress. Last logged message was: <7304>
<GPUmanager> <2> Sniffer Result Code 3
(Error code 0 :: 42)
I think it has something to do with my VGA drivers, but I have uninstalled all the Nvidia and Intel drivers and installed both the newest and previous versions of drivers. But none fixed the issue.
Now heres where it gets interesting. yesterday I decided to test if a cracked version of AE CS6 worked on my computer. And it did, it openend smoothly and everything worked as far as I could test.
After testing I unistalled the cracked version (completly wiped everything), and reinstalled CC. But still no luck.
As for Premiere, the moment the loading screen pops up it says "Adobe Premiere CS6 has stopped working". All I can click is cancel, and when I do it just closes Premiere.
I saw a thread where someone said the issue was Nvidia geforce Experience. But even when I don't install this AE and Premiere don't work.
hope I gave you all enough information!
thanks for your time

read below
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modules.html
-http://forums.adobe.com/thread/1001579
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
-link to why http://forums.adobe.com/message/4685328
-http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

After Effects & Premiere - Can I Make A Film?

I have After Effects and Premiere CS3.
Is it possible to create comps in After Effects in the 2K or 4K size and edit them in Premiere, to be output to film later?
I have made plenty of cartoons with AE/Premiere that wound up on DVDs, but I have wondered if it is possible to use those programs to make a short film with film-sized resolution.
Thanks!

JSS1138 wrote:
I'm less conversant with After Effects, but I don't think Premiere can handle those resolutions by itself. As far as I know, they only become available with the RED plug-in.
Nope, no problem, sans RED plug-in:
Just use Desktop mode, and set your width and height and PAR appropriately.

After Effects & Premiere - workflow

Similar Messages

Maybe you are looking for