After Effects Ram Preview Drops Frames , Using Strangely Too Much Ram

System Specs :
     CPU : Core i7 4770k
     Memory : 16 GB DDRIII
     Graphic Card : GTX 770 4GB RAM
     Storage : 256 GB SSD + 2 TB HDD
     OS : Windows 7 SP1
     Using After Effects CC 12.2.1.5
NOTE : NOT ANY ADDITIONAL HARDWARE IS ATTACHED TO MY PC . NO SOUND RELATED EQUIPMENT NOR CAPTURE CARD NOR ANY THING ELSE
Hi there
As you Already Don't know I'm an After effects Specialist Using it for quite long time . There is an Ancient Problem with CS6 CC versions . I have a short Small size 1080p Video , about 8 MB , I drag it into project panel and then put it into timeline hence it creates a sequence . There are no Effects and nothing added to timeline , just a small simple video . The Strange Problem is when I click "0" for ram preview , The video starts playing and the green bar above timeline starts to fill . When Ram preview Finishes and plays the video from beginning I See there are several frames Between which are not being loaded to Ram ! The video plays RGB color bar instead of main video and when I check the Green bar above Timeline I see that those frames are being dropped and there is no Green bar above them !
I have had this problem several times before but this time it is too important and the problem should be solved . What is obvious is that some frames are not being rendered or are being deleted after render !
Another Strange problem is that when I open Task manager , It shows AE uses around 10 GB ! of RAM when I press "0" for Ram previewing this video !
So there is a Logical explanation here , Somehow when I do ram preview this video it uses extra ordinary too much ram so AE is unable to load the full video (8 MB) into Ram and hence deletes some of frames .
most of my videos have not this problem and use acceptable amount of ram .I've had this issue with some of my videos till now .
Listen carefully : "This has nothing to do with AE preferences or low memory or plugins . because there is nothing wrong with any individual components of may hardware or software . I have far more than enough RAM for a 8MB video . My Memory has no hardware or software problem . I tested them and if there was any problem with memory or other hardware that should have affected other applications . I have the most recent AE version . I have the most Recent windows updates and drivers . I have a Clean virus free system , and as a computer engineer this strange AE problem is rarely caused by viruses , trust me . I have not any hardware instead of ones a normal PC has . I have not any problem with my whole entire system configuration because I have benchmarked my PC with several up to date softwares . I have tested my PC with almost any STRESS TESTING solutions available for really long period of time , 3 days by IDA64 . Not any driver conflict , dll missing , registry problem have been discovered , as I know perfectly how to solve them ."
I asked some of my friend whom are expert in AE . I handed them my videos and Watched ALL OF THEM HAD THE SAME ISSUE ! So the problem isn't related to my Local PC . What i believe is that there is some malfunctioning or miss coded part in AE source code that decides to reserve such a huge strange amount of ram for such a tiny 8MB video . The point is that the AE works fine , no crash or any problem report . So the AE it Self decides to allocate such huge amount of ram and thinks it is correct ! So I think this is a work around that AE developers in adobe are using to bypass a problem or conflict ! by Using more amount of RAM . I think that there might be some miss understanding between the AE and my installed codec . I installed MEGA CODEC PACK on my PC to enable some new codec supports , and so are some of Windows default de/encoders changed to new ones . I think there shouldn't be any problem But there is something wrong between AE and de/encoder modules !
Please any one with any suggestion , I really appreciate your advices .

###UPDATED###
Well thank you guys for your patience ...
as you considered I forgot to mention the codec itself and other stuff ...
The video is in 1080p , 35 sec long , it is a green screen shot , this video is directly downloaded from YouTube and plays perfectly on all tested PCs . here are detailed info :
Format                                   : MPEG-4
Format profile                          : Base Media
File size                                 : 8.55 MiB
Duration                                 : 34s 993ms
Overall bit rate mode                : Variable
Overall bit rate                         : 2 050 Kbps
VideoFormat                            : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Codec ID                                 : avc1
Codec ID/Info                            : Advanced Video Coding
Bit rate                                    : 1 927 Kbps
Width                                      : 1 920 pixels
Height                                     : 1 080 pixels
Frame rate mode                      : Constant
Frame rate                               : 30.000 fps
Color space                              : YUV
Chroma subsampling                 : 4:2:0
Bit depth                                  : 8 bits
Scan type                                 : Progressive
NOTICE : This video is just for testing the lighting and etc , and so the Sampling and other specs are not considered for broadcast .
I think you hit the point ! Thats K-lite codec pack installed on every machine which the video is tested on ! The point is whats wrong with it ?! I have had never ever any problem with this codec pack !!!
The deadly question : So what are the alternative ways to work with codecs that AE doesn't support ?! because installing codec looks simple and sufficient !

Similar Messages

Mail and Preview get stuck using way too much CPU

Has anyone else had an issue with either Mail or Preview getting stuck using over 100% CPU for no apparant reason. This has only happened since downloading 10.8.
With Mail, I can't figure out what sets it off. It happens occasionally when I'm replying to an email, but it doesn't happen everytime. When it happens I have to quit Mail to get it to stop.
With Preview, it happens on some pdf documents when I search for a word. After I'm done searching, the CPU percentage will be going crazy (!00-125%) until I quit the app.
I have a 2011 Mac Mini with 2.3 ghz processor and 8 G RAM

Not a solution, but if the Podcast feed is dormant, why not unsubscribe?
As to the file structure for media on the device it is deliberately obscured as a countermeasure to casual piracy. See Recover your iTunes library from your iPod or iOS device. Content put on the iPod by a non-iPod aware product is going to treat it like any external drive. The iPod firmware won't read that media.
tt2

IPhoto 5.0.4 using way too much RAM - Help!

Hi there, I hate using iPhoto now. Everytime I use it it gobbles up around 300-500MB of memory according to top. This is real memory I am talking about, as listed in the 'RSIZE' column.
I only have 1300 photos and yet the program is barely usable. I have 1.5 gigs of RAM in my G5 and yet after using iPhoto I have 6 swap files in use for a total of 2 gigs of virtual memory paging files. It bogs down my entire computer and it frustrates the **** out of me.
Is there anyone else who has a similar sized library as mine and has these horrendous memory usage problems?
Thanks,
Graham

Hi Graham,
There is a serious bloat and slowdown using certain cameras. these camera have large Makernotes that will bloat and slow down the iPhoto Library to a crawl.
Do a search in this forum for "Makernotes" and you will see what I mean.
Or go to this site:
http://www.ericlindsay.com/apple/iphoto5slow.htm
Lori

Bridge memory leak/using too much ram

I just built a new PC tower for business use and installed PS, ID, LR, and BR CC trials. I already have all of these (CS5) on my personal laptop, all work fine. Bridge on the new tower has been using WAY too much ram/caching too much and crashing everything. I'd changed cache preferences, purged the cache several times, and within days it is back at it again. PC specs: 8 core AMD processor, 16GB ram, 2x 3TB HDD
This is being used to show photos, edit, burn and print at events. I cannot keep closing bridge every half hour to keep my computer running. Right now bridge is NOT keeping 100% previews in cache, exporting cache to folders, cache size is about 25,000. If bridge is going to crash every half hour on a machine with 16GB of ram, while CS5 ran fine on my laptop with only 4GB something is seriously wrong. At this point I don't know if I should actually subscribe to CC or just move my CS5 to this new computer.

I have tried to analize better what happens. In the dashboard I only have a calendar, a calculator, a clock and one postit (but there is nothing writen on it). If I use something in the dashboard, for example, the calculator, and I do some multiplications, after a couple of minutes the use of memory of the dashboard starts to increase. I closed any other program and in some minutes I have sen how it increased until I stopped the process when it was using more than 2GB! (you can see it in the picture). It's very strange! (Thank you very much for your help!)

ICal Consuming Too Much RAM

Hi All,
I have iCal 2.0.3 on two computers. It is working fine on my Dual G4. On my iBook however is has become an 800 lb. Gorilla. I noticed everything was slowing down, slow to open, slow to close, a lot "disk activity" during usage so I check the Activity Monitor. It was using over 340 MB of RAM and climbing. I've tried a bit of everything. Tossed all of the caches, all of the Pref files, tossed the application itself, restarterd so the "Helper App" would not be active, then copied a new copy from the G4.
The problem continues. It is using WAY TOO much RAM. I'm reinstall it, but I could only find the 1.5.5 version at Apple.
If anyone has an insight to the issue, or can point me to a fresh installer...I'd really like that.
I was going to install 1.5.5 and have Software Update do an upgrade, but no dice. Installer will not work with Tiger.
Using 10.4.7
iCal 2.0.3
John

500 Mhz G3 as per my profile. Seems to me the installer would not have installed iCal if there were some hardware incompatibilty.
I've trashed every, Pref, Cache, and the folder for iCal for App Support thinking it would create a new one and it did. I quess I can use the one on my G4 and have it send notifications via email. No trouble on that model.
I don't know when I recall it happening. Could have been from Tiger all along. After hearing all the disk activity the other day I checked the Activity monitor and saw the huge amount of RAM and CPU time.
This has been a bugger of an app. I did some beta testing for Apple on this application when it was 1.5.2. Complained bitterely about the initial inability to have a floating event window and they asked me to help test it.
This is about the strangest problem I've seen in more than ten years of using a Mac.

Full screen preview drops frames

Hi all,
A continuation of the thread I opened here (with hardware specs for information):
http://forums.adobe.com/thread/657008?tstart=0
Whilst I resolved the tearing issue secribed in the previous thread I still can't get smooth playback on the third full screen preview display and I'd like some basic advice as to what I could do:
A couple of things I have tried - firstly I tried a basic sequence with a spinning graphic (in order to rule out any issues with disk/network access), and then also tried two screens rather than three (so only one graphic card was in operation), a 60p/30p project with screens set to 60Hz and a 50p/25p project with screens set to 50Hz.
All to no avail - the full screen preview drops frames, especially with 50p content - 25p is better but every 20 seconds or so frames are dropped. Audio is always fine, regardless of the source, BTW.
As a reminder, this is a 12 core i7 with 2 x Quadro FX3800, all unnecessary services disabled, 12Gb RAM, CS5 5.0.3, latest WHQL Nvidia drivers.
Not sure if 5.5 improves this in any regard as I'm still waiting for my licence key.
Video playback outside of premiere is perfect, 1080p50 plays fine full screen on any display through windows media player/VLC.
Any suggestions please - again I wonder if a Blackmagic Intensity or similar would help?
Has anyone else seen this behaviour? Could anybody have a go a reproducing the issue (a simple spinning or sliding jpg demonstates the issue easily and simply)
Thanks all
Sacha Goodwin.

There exist no 12 core i7's. The max is hexa-core, but in your previous thread you said Xeon X5670. So what is it?
Well spotted, my bad - it is indeed 2 x hexa-core X5670's - which of course is 12 cores in total.
I still suspect your Editshare NAS.
I'd say unlikely since - we've replaced it with something else, also:
I tried a basic sequence with a spinning graphic (in order to rule out any issues with disk/network access)
and at any rate I tried it as a local project on local disks and it made no difference.
For graphic read plain color matte and basic SD res JPG (same results with either)
What happens when you increase memory to 24 GB?
No idea as I don't have access to any - strikes me as odd though to think anyone would need 24Gb or RAM just to display a rotating still smoothly.
Premiere is showing 300Mb of RAM, total RAM in use when everything is loaded and running is 3Gb, 9Gb free sitting there twiddling it's virtual thumbs.
BTW I should also mention that this happens even on SD projects, not just HD ones. Also watching the task manager shows virtually CPU usage, no disk and no network access during playback (as I would expect). No peaks in any graphs correllating with the dropped frames. Also enabling/disabling MPE Hardware assist makes no difference.
Sacha.

Has anyone solved or worked around the After Effects CC red flash frame glitch?

I can't find any mention on any forums of the After Effects CC red flash frame glitch later than Feb. 2014. I just installed 12.2 (which was my first CC version) on my macpro and started getting the red flash frames randomly, but with increasing frequency, in my projects. I have never had this problem before on any previous computer or version for AE. The forums I've read have referenced ProRes source footage, outputs to ProRes, and lens blur. My project uses all of these things.
If there is a universally accepted solution/work around, I haven't seen it definitively. Do I not use ProRes source footage? Do I not render to ProRes 4444? Do I not use the lens blur effect? Do I give up and go back to CS6?

Hi Keith,
I have the "same" issue with the red frames in AFX CC
I have seen them first, as I resized a prores4444 HD to a smaller format and saw the redframes in the preview window.
Setup in AFX: I created a comp from the HD Prores4444 footage and put this comp in a comp with resolution of 960x540.
The output format was again prores4444.
I shuttled through the clips in the small comp and I saw the red frames too.
When I switched to the HD comp at the same position everything was fine.
I "solved" the problem by flushing the cache, twice. Because after the first purge I was only able to render the first clip. The second one had the red frame problematic again.
Maybe It has something to do with hardware accelerated layers.
I'm using a MacPro running OSX 10.8.5 with a Nvidia GTX680.
Cheers
Michael

CS6 After Effects Fast Preview on my iMac

Can I run CS6 After Effects Fast Preview on my iMac with Graphics ATI Radeon HD 4850 512 MB?

Okay - thats great wasn't down for the expense of buying a new mac but is there a reason why my preview is cutting off or choppy. This is the reason I asked in the first place. I can't seem to get After Effects to run the full the length of the animation without it stopping in the middle and looping to the the beginning.
Help me please!

Dropped Frames Using JPEG Codec In Final Cut 5

Hello,
Can anyone out there please tell me if they have had any problems with DROPPED FRAMES using the JPEG codec whilst editing a sequence of JPEG stills?
I'm using Final Cut Pro 5 on a Duel GHZ G5 with a 3TB Fibre Channel media drive (Very, very fast. Can easily work with HD and not fall over) The kit also has a Blackmagic SD card which handles the JPEG codec.
I've tried everything I can think of, changing settings, checking hardware and stamping my feet. My product support tells me that Apple doesn't support the JPEG codec and editing sequences with it will cause Final Cut to drop frames. Has anyone else over come or had this problem? The sequences also use .wav & .aiff audio files. The show I'm editing is animation so there is no capturing and editing of hours and hours of rushes, it's all individual files.
Any help or advice out there?
Thanks in advance!
Ben
G5 Mac OS X (10.4.4)

We've been trying that, exporting all the individual files as a single quicktime movie and using that to edit, but our problem is that due to the nature of the production (An animated television series) all work in progress renders we get are JPEG.
This is because the software we're using to animate with (Celaction 2d) can only output un-compressed or JPEG Quicktime movies. To keep our hard disk space down (Even though we have plenty) it'll be great to fix the JPEG problem once and for all. Otherwise I guess it'll be re-rendering all the JPEG movies into another codec? Which is time consuming.
Anyone else had this problem? Does anyone know of any issues using .wav files?
Thanks again!
Ben
G5 Mac OS X (10.4.4)

Firefox uses too much ram

My FIrefox has been using too much RAM as of late. I have followed all the steps in the firefox support page about checking for possible plugins that may or may not be using too much RAM, but after starting firefox in safe mode, there really wasn't much of a difference. Maybe like 5k kb less, but it's still not enough to account for the 1.7million kb that firefox ends up using with one tab open.
I like to leave my pc on for a bit, and sometimes I'll leave firefox running with a tab open while I'm using other applications, but even if i restart my firefox, the RAM usage does not decrease. After closing all applications and leaving only firefox running, it appears to be around 1.5million kb. Only if i restart my whole pc does the RAM usage drop back to normal levels, and then it ramps back up after a period of time.
I would like to get this resolved soon, or at least figure out the cause of this.
http://puu.sh/9ihMr/585bac7192.png
http://puu.sh/9ihPx/4a9da78104.png
My system has:
2x2GB DDR3 Kingston memory modules
Radeon HD5850 with 1 GB of RAM
AMD Phenom II X4 955 processor 3.20GHz
Windows 7 Professional, SP 1 64-bit OS

Start your Computer in safe mode with networking. See if there
is still a problem.
It could be the work of one of your add-ons, or even add / mal-ware.
Look thru your add-ons list and make sure you know what each one is
there for. Also, check the programs that are on your computer
'''Windows > Start > Control Panel > Uninstall Programs.'''
'''Mac: Open the "Applications" folder'''
Go thru the list and use a web search to check any that you don't
know what they are.
'''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-caused-malware Troubleshoot Firefox Issues Caused By Malware]''''' {web link}

Since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
The crashing were stopped! also the battery was back to normal.
I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
Adding the mail accounts back, still everything work ok
Hope this solution will help you too,
Enjoy!

FF using too much RAM and getting slow

FF is using too much RAM
After I start FF, like 5 minutes later, it's using like 1gb of ram, and if i dont restart it, i grows to 3gb~4gb of RAM used

the article above didn't help
updated to the beta version and solved it

My MBP mid 2014 is using too much RAM

My MBP mid 2014 is using too much ram on kernel task, and some others what can I do to fix this?

To add to Tim's excellent advice, look at my numbers for my quad-core i7 iMac with 12GB RAM installed:
As you can see, the system has reserved almost all the available RAM but the swaps are zero and the memory pressure is on the bottom of the scale. My computer runs very fast.
RAM handling in OSX changed with OS10.9 and continues in 10.10. The measures you were using only apply to Mac OSX 10.8 and older.
If your swaps move up into the Gig range, you are probably using a bunch of RAM. You cannot upgrade RAM in a 2014 Retina model so it behooves you to avoid third-party utilities like "FreeMemory," keep an eye on Safari extensions, and be frugal with your user login items (System Preferences > Users and Groups > {your account} > Login Items tab).

My MacBook Pro is using too much RAM.

Hello,
I have got Apple MacBook Pro 13.3” (ME865LL/A) with OS X Mavericks 10.9.3 and I’ve noticed that my MacBook is using too much RAM. I'm doing nothing, I've got opened only my Google Chrome web browser and my notebook is using about 6,6 GB RAM of 8,0 GB... Have you ever had problem like my? I was reading about Memory Booster - RAM Optimizer. What do you think about that?
Thanks in advance for your help!

I don't use any AV software - if you just keep a watch on what you download and where it's from, you've no need for it, either.
See The Safe Mac -> Mac Malware Guide. There is some malware and adware for Macs, but no viruses (although you can pass them along to your Windows friends!).
Clinton

Labview 2010 vi using too much RAM and causing Crashes

hello everyone,
I was given a LV 2010 vi to integrate with another functionality.This Vi is used for a long time on XP and Windows 7 platform having various RAM size.it still runs fine on those PCs. This Vi has functionality that it waits for user to press start button that it reads data and plots.however i am not giving start command and it starts consuming too much RAM and resulting system Crash.
System Config: I have Core i5 CPU 650 @ 3.20GHz with 2 GB RAM and windows 7 .
Plz show some methods to prevent them and why it is happening.?
Note:1) i also checked my ram through windows test and it has no error.
2) windows shows me some low disk error sometimes.
plz help me out here i am stuck here for week.
thanks & regards

Post your VI if you are allowed, we cannot help you without that info...
If you are a beginner in LabVIEW, it will not take 1 day to gain some level. LabVIEW is a full featured programming language, it is very easy to program it wrong. I suggest you to start learn it using the online resources. You have an active LabVIEW licence? If so, you can access the "self-paced online training" via menu point "MyNI", see top of this website just next to your name (you need to connect your account to your licence in order to use the online training). Another option could be to pay for a virtual classroom course, get more info here: http://sine.ni.com/tacs/app/overview/p/ap/of/lang/en/pg/1/sn/n5nline,n24:12725/id/1582/ I did this a few years ago (Core 1 and 2.) and the tutor from NI was very professional, and it was also comfortable since you attend the class via internet from yoour home or workplace.

After Effects Ram Preview Drops Frames , Using Strangely Too Much Ram

Similar Messages

Maybe you are looking for