After Effects rendering the video with the audio out of sync

so, the thing is, i did the animation on flash, exported it, put it on after to edit audio and what not, everything looks fine, previews are good, so, lets render!... every time i render the final video have the audio out of sync, specially the audio that is already on the first video. the video its originally on 12 fps, if i change the interpretation to 24fps, everything get worse. any help?

ok, both Flash and After effect are CS6, i have a Lenovo Ideapad, can handle 64 bits
first i exported the video on .MOV from Flash CS6, without any problems
Then i finished the edition on After Effects, everything look good.
i have tried to render it on MOV, AVI, MP4 and the audio for the video that was exported from flash always get out of sync. i dont really move anything else

Similar Messages

After Effects and enabling GPU with the AMD Radeon R9 M295X

I have the new 27in iMac with an AMD Radeon R9 M295x. As far as I can tell, I am limited to CPU rendering in After Effects.
I keep reading that GPU is available as long as I don't need CUDA and nVidia for Ray Tracing.
As it is, I'm only seeing CPU available. GPU is grayed out.

Show a screenshot of exactly what you're seeing that has you concerned. From your brief description, it seems that everything is functioning normally.

Photoshop and After Effects is not installing with the new updates, any suggestions?

Each time the update says that the "update failed". I have tried the update several times, both on my laptop and my iMac. Photoshop finally installed on the iMac, but neither will update on the MacBook Pro.

This is a bit of a shot in the dark, but check to make sure that you have Rosetta installed in Mac OS and then try again to install After Effects. I know that Mac OS has a (mistaken) dependency on Rosetta for After Effects to run. It _may_ be that this dependency also causes a problem with installation.
Here's a document that lists some know issues with After Effects on Snow Leopard:
http://kb2.adobe.com/cps/516/cpsid_51667.html
When you do get After Effects CS4 installed, be sure to immediately update to After Effects CS4 (9.0.2).

After Effects did not install with the rest of CS4

I purchased the Student Edition of CS4 Production Premium. When I ran the installer I selected "custom" and AE was unchecked and it would not let me check it. I did regular install and it did not install AE. I used all 4 discs in the box. Any thoughts?
This is the Mac version.

This is a bit of a shot in the dark, but check to make sure that you have Rosetta installed in Mac OS and then try again to install After Effects. I know that Mac OS has a (mistaken) dependency on Rosetta for After Effects to run. It _may_ be that this dependency also causes a problem with installation.
Here's a document that lists some know issues with After Effects on Snow Leopard:
http://kb2.adobe.com/cps/516/cpsid_51667.html
When you do get After Effects CS4 installed, be sure to immediately update to After Effects CS4 (9.0.2).

After Effects CS6 Update fails with the code (U43M1D204)

I was just downloading and installing the latest updates on both my windows workstation and my Apple MBP. Everything went fine on the windows machine but I keep getting the following error when my MBP attempts to update After Effects CS6:
Update Failed
The download appears corrupted. Please try again after a few minutes.
(U43M1D204)
I am running the latest version of Yosemite (10.10.2). Is there some half downloaded file I can delete to make this work? I've waited. I've rebooted. I'm VERY reluctant to delete my current installation of CS6 if this is what is required. I'm an instructor at a local community college. The college currently only runs CS6. I teach an animation class that uses After Effects and as such I need CS6 working on my MBP. If this update is non critical I'll just let it ride. Oh, yea and I also keep AE CC and AE CC 2014 for no other reason than I can take a students CC 2014 file all the way back to CS6 so they can work in class. I'm guessing I'll need to add CC 2015 or what ever they call it so I will have 4 installations of AE just to do file conversions..... but that is another thread.
Any help on the current install issue would be appreciated

rimcrazyph wrote:
If this update is non critical I'll just let it ride.
What update is it? What current version of CS6 do you have?
It may be a permissions thing. Mac OSX goes all screwy in the permissions whenever it updates. Try fixing that first. fixing permissions problem that impedes start of Adobe applications

Computer specs for nice 3D rendering/ after effects rendering and video rendering in general ?

Hi there! I would like to know what the perfect specs for a laptop/workstation/computer are, so that I could do my creative work from home..my old laptop (Macbook Pro, 8Gb Ram, V 2010) is not good enough for 3D rendering, not even Video rendering or After Effects... I need to know what graphics card for eg or how much Ram or what I need to look for in a computer so that I won't get any error messages after rendering for half a day anymore...;) (--> very annoying) Money is not a first priority...i would first like to know, what the best option would be that one could have and then down size from there;)
I would appreciate every help:) my laptop is dying...i need something new and better;)
cheers stephs

Regardless of workflow, you want a workstation, not a laptop. You will get much more bang for your buck.
Also, as others have said, Windows machines tend to be better choices than Macs right now. And that's coming from two people who used to use/love Macs...
In general, you want the fastest clock speed on your processor that you can afford. You want as many cores as you can get with that nice, high clock speed.
Ideally, you want 4GB of RAM per core of your processor - MINIMUM 16 GB of RAM, (but get as much as you can afford).
You want an SSD for your cache and a good-sized regular hard drive to hold footage, renders, etc.
GPU matters for Premiere and any third-party plugins that use it (like Red Giant Universe, Element 3d, Mettle's ShapeShifter, etc.), but not for AE and not for Cinema 4D (which comes free with AE these days).
Again, this is just some generalization. For more specific info, we'll need to know more about what you're doing.
Also, you don't need to take our word for any of this; read what Adobe has to say on the matter: FAQ: What computer and components should I buy?

Dynamic Link After Effects to Premiere (Video Only, No Audio)?

Can you Dynamic link an After Effects file so that audio does not interleave into the premiere pro project? I just want to link the video part of the comp and do not want audio data in my asset.
*I already know that I can double click the asset in premiere and drag video only from there. I want to strip audio from the after effects linked asset so when i drag the asset from the bin to the timeline it will not try to add audio also.
Thanks,
Cliff

If you unlink the audio and video in Premiere Pro
Then you select only the video layer to replace with After Effects Composition
You'll end up with the Audio automatically turned off in AE when the dynamic link composition is created.
You get the same result if you leave the audio layer linked but you lock it before enabling the dynamic link.
The advantage to doing this is that you don't have to mess with audio in After Effects. There is no additional disadvantage to locking or unlinking the audio track because any time you replace elements in PPro with AE compositions the Audio and Video are unlinked. You'll need to re-link them if you plan move the tracks around at all because you loose the out of sync warnings that you'll normally get.

After Effects CS6 render problem with exactly one frame or exactly at one point in the timeline.

I've recently tried to render a project in After Effects CS6 but everytime I render the render fails at exaclty one frame or a time in the timeline, in this frame or point in timeline I have a composition with the following effects: Twixtor Pro and inside that composition I have the video with the following effects: Motion Tiles and Wave Warp. I rendered the project in H.264 format with a 8 bitrate. I tried to fix this even by trying to render the project as a TIFF Sequenece but the render keeps failing and the final output is only the part of the video until that exact frame. I have caps lock on to try to speed up my render. Any help would be appreaciated and let me know if you need more information and i'll try to give you more.

Set your work area to about 5 frames before the fail and 5 frames after and see if you get a fail.
If you get a fail then start turning off a layer at a time until you find the culprit. Let us know what's going on there.
A screenshot of the timeline with all properties revealed may also give us some ideas.

Video with Multiple Audio Tracks-- IOS 4.2 Removes Way to Select Them

After upgrading to IOS 4.2 on my iPhone 4, I've found it no longer lets me select from among multiple audio tracks. The option and button is completely gone.
I encode my videos with AC3 audio as the first track (for my home media devices), and stereo audio as the second track (for the iPhone). Now the iPhone will just play the video, with no audio, and no way to select another track. This is extremely frustrating as I've encoded all my DVDs this way, and never had any issue with playback like this on any IOS device going back to the first gen iPod Touch.
Anyone else have this issue, and know of a work around? Thanks!

I too have the exact same problem for the exact same reason. Did you ever figure out a workaround (other than reencoding all your videos)?

Synching video with external audio source

We shot an interview, and somehow no audio was recorded...no worries, we had a little digital recorder going as a backup....
I synched the video with the audio, and all is good for about 10 seconds, but then, sure enough, the audio begins to go out of synch,...
I suspect this has to do with the whole 29.97 vs 30 fps issue, i did play around a bit, but couldn't figure it out...
any suggestions?
the video is regular DV...
audio is 32hrz WAV (converted to 48 hrtz AIFF, no help)
anyone?

This is a problem that comes up regularly around here so try searching.
The clips must be different lengths, yes?
The audio clip may be the same length but it must be clipped off.
The way I have dealt with this on a friend's system (using a Canon XL1 as the DV input) was to simply open the Speed window of the of the audio clip and enter a new time so it precisely matched the time of the video clip.
Say the event is exactly 60 seconds long from first frame to last frame. The audio drifts out of sync so it is slightly longer, say, 61 seconds. You control-click on the audio clip in the timeline and enter a new length. It may need to render.
sorry not to have the absolute answer. Double-system sound just doesn't come up very often in my life. Luck, let us know.
bogiesan

Problem with xvid videos with two audio streams

/ Hi,
recently I purchased a Creative Zen X-FI2, it is working perfectly, but I only have one problem, I have some videos xvid with two audio streams (mpga), on VLC I can select either of the two audio streams but I haven't found if I can select the audio stream on the Zen player.
Does anyone knows how to select among different audio streams on a video?

The X-Fi2 doesn't have such an option.
If you still want to be able to watch the video with the second audio stream, I think the only possibility is to re-encode it using the second audiostream (or disable the first).

MAC - Audio Out of Sync

Using CS4 for MAC
Editing on 2 x 2.66 GHz Dual-Core Intel Xeon, with 3 GB 667 Mhz DDR2 FB-DIMM (Memory)
Running Mac OS X Version 10.5.6
Capturing Video Via Firewire Using a Sony DV Deck (Model HVR-M15U)
Capturing in Premiere Using Scene Detect. After capturing video, I have noticed that 1. It captures as one video clip and then separates the video into separate clips. After putting clips onto the timeline I have noticed that everything has become out of sync. 2. When having used CS3 prior on Windows and having used scene detect, premiere separated the clips as it was capturing the video (no audio sync issues) 3. After getting everything in sync, and then using Dynamic Link to send it to Encore, the video once again gets out of sync.
Has anyone else encountered this problem? Is this a Mac Only Issue? If so, do I need to switch back to the PC version CS4? Any comments of suggestions are apreaiated

I had the problem with CS3 on the Mac, but not CS4. Audio sync seemed to get knocked out of sync by glitches at the beginning of the tape and Premiere didn't recognize there was a problem. My solution was to advance the tape to the 30-second point and capture from there, well away from defects common near the beginning of DV tape. If there was anything critical in that first 30-second portion I captured it separately.
Yes the Mac version handles scene detect differently. It creates subclips from one master clip.

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

Showing a video with the new effects applied

Hey there
I´ve made a colored project using DaVinci Resolve and now i´m trying to insert the before and after videos onto my showreel using a curtain like effect that starts with the before video and then opens the after video with the effetcs applied.
Is it possible to do it in After Effects? Any way to do that curtain like effect?

Although, now that I think about it, why not just do this in an NLE? This is pre-built in Premiere Pro and most other editing software. I wouldn't even bother with After Effects at all for a simple video editing task like this.

Having a hard time lining up the audio to the video with FCPX.

Hi there
I'm having a hard time lining up the audio to the video with FCPX.
I'll just advise what I am doing.
I have recorded video of me playing bass guitar along to a song.
I have recorded the video in 720p with a DSLR.
I have recorded the bass guitar audio directly into Garageband (Using a USB interface) on a separate track to the song that I am playing along to. (It is played very well and is not out of time to the original)
I then mix the original song and the new bass guitar audio played by myself and export as an AIF in Garageband.
I import the video from the DSLR and AIF audio into Final Cut Pro X (10.0.5)
I can get the audio and video NEARLY bang on to timing, but its still ever so slightly off. As its ever so ever so slightly off it looks like I'm not really playing the bass guitar myself.
I'm moving the audio intricately but I just cant seem to get it lined up EXACTLY.
My camera picked up a tiny bit of audio so I can hear and see the audio wav on the video track to try and line it up with the audio wav of the AIF, but no matter what I just cant get it to line up and look exactly right.
Can anyone offer any advise or tips?
Thanks

Make sure you have Snapping switched off.
Expand the timeline to see the detail.
Rather than lining it up manually you could try the Automatic Audio Synch if there is any audio on the original video.

After Effects rendering the video with the audio out of sync

Similar Messages

Maybe you are looking for