After Effects wont render video completely

Usually I am pretty good at solving problems, but for this issue, it seems that I cannot figure out why I can't fully render a composition. I've used After Effects for over 3 years and I've done tons of video work for clients.
The issue lies when I send my entire composition to the render queue. My export range is for the entire composition. But when I press render, it only renders 21 seconds and then stops completing the action of rendering.
I'm in Adobe CC 2014, if that makes enough of a difference to fixing my problem.
Can I get some help?

I just recently installed the newest version of After Effects and did a system reboot. I make it past 0:21:09, but the render stops at random points. The farthest it makes is to 0:52:03. It is a three minute long video. I get an status saying "Failed at (Timecode)".
This is the latest version of Adobe. I am operating under 10.8.5.
I don't understand why I am having these issues.
For it will stop at times before then, but, I honestly dont know the issue.

Similar Messages

My After effects wont render the whole video?

So I recently switched to After Effects CC 2014 and for some reason, When I go to render my video, the first clip is the only thing rendered. I Have the whole area selected open however.

Nobody can tell you anything without proper system info or other technical details like exact comp settings, render settings and what have you.
Mylenium

After Effects wont render full res - possible RAM issue?

Not sure if this has ever come up before - I'm unable to render out of after effects and RAM preview half res. When I try and RAM preview the comp just goes black and when I send it to render I get the following message:
After Effects warning: Logged one error - "error Rendering while writing to file. An output module failed. The file may be damaged or corrupted(-1610153464)"
I'm able to RAM preview half res okay, and can render out half res as well. I've tried it with rendering multiple frames simultaneously on and off, clearing the disk cache and turning off any RAM hogging effects.
An obvious cause I've identified is that I've recently upgraded and replaced the RAM on my machine, however, after effects has been the only software effected. Cinema 4D renders no problems and I've had no other problems with the general running of my machine.
Have there ever been any cases before of After Effects not working with certain types of RAM?
My set up -
Mac Pro - Early 2008
OSX Mavericks 20.9.2
2 x 2.8 Ghz Quad-Core Intel Xeon
16GB 800MHz DDR2 FB-DIMM
250GB Samsung SSD

I'm running After Effects CC 12.2.1.5
Sorry should have mentioned, no matter what format I render as, whether it be QT or TIFF sequence, I still get the exact same error.
QT version i'm using is 7.6.6
In terms of reproducing the error, it seems to happen to pretty much anything I try and render, unless it's an extremely simple one layer comp. Rendering a comp with 2 image sequence layers (1920 x 1080) will cause this to happen, but if there's just the one image sequence alone in the comp (and no other layers) then it will render.

After Effects wont open error message

Hello.
My After effects wont open. I've read many forums and info that others have written about it not opening. Stuff about erasing fonts, deactivating fonts, then also, finding folders /Library/Application Support/Adobe/Common/Plug-ins/CS4/MediaCore---> which was empty and had nothing to erase or do anything with http://forums.creativecow.net/thread/2/973961 ...Still nothing.
this is the error.
Last log message was: <140735190438672> <EAMountPoints> <0> Error: mount point list is empty
My computer is a brand new mac book pro. Tip Top of the line. Not sure what other details i should give.
Thanks for any help you can offer.
UGH boooo
thanks
L

I saw that there were a series of questions i need to answer in order to get the right answers.
What exact version of After Effects? Include the minor version number (e.g., After Effects CS5.5 with the 10.5.1 update). Do not just say "After Effects with the latest updates"; give the specific version number.
12.2 - after effects CC - CS6
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
yes. i even uninstalled and reinstalled the newest...again.
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Mac OSX 10.9.1
Tell us about your computer hardware. Include CPU type and number of processor cores, amount of RAM installed, GPU, number of disk drives, and how any external drives are connected.
2.3 GHZ Intel Core i716GB 1600 MHZ DDR3Macintosh HDprocessor #: 1Zero external drives connected.I use my local connection with my desktop to share files. Model Name: MacBook Pro Model Identifier: MacBookPro11,3 Processor Name: Intel Core i7 Processor Speed: 2.3 GHz Number of Processors: 1 Total Number of Cores: 4 L2 Cache (per Core): 256 KB L3 Cache: 6 MB Memory: 16 GB
What versions of drivers for your graphics hardware do you have installed (including CUDA driver and driver for display adapter)?
Graphics NVIDIA GeForce GT 750M 2048 MBInstalled CUDA
Do you have any third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU)?
NO
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
If you are getting error message(s), what is the full text of the error message(s)?
Last log message was: <140735190438672> <EAMountPoints> <0> Error: mount point list is empty.Generating crash log, which may take a few minutes. although there is another window that says A LOT MORE!!
What were you doing when the problem occurred?
trying to open it.
Has this ever worked before? If this worked before by doesn't work now, what has changed on your computer in the intervening time?
It has worked for about 4 or 5 days. It was even working when i was doing the same action prior to the last time it stopped working. I was uploading a file from my other computers file. Which i had done many times throughout the day. As i work on one computer and when i have to leave and bring my laptop with me i do so. Because i work on my computer all day long. Desktop or laptop.
Do you have QuickTime installed. (You should.) If so, what version? The answer should be specific, such as "QuickTime 7.6.2".
10.3
What other software are you running?
iWork - Numbers
Do you have any third-party effects or codecs installed?
Yes. I've since deleted them but i'm not sure where else to find the files if they're still around. ?
Are you using OpenGL features in After Effects?
Not sure i know what that is?
Does the problem only happen with your final output, RAM preview, or both?
its just not opening
Are you using Render Multiple Frames Simultaneously multiprocessing?
if that is the Double line play button then yes.
Are you using the ray-traced 3D renderer?
Not sure what that is.
If the problem is with output, give your exact output settings (both render setting and output module settings). Screenshots help.
What is the exact sequence of steps that you are taking?
Thanks for any help you can give me:)
L

I have the current Mac Pro the entry level with the default specification and i feel some slow performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest?

i have the current Mac Pro the entry level with the default configuration and i feel lack of performance when applying after effects on my videos using final cut pro and also rendering a video takes long time ? what upgrades do you guys suggest i could do on my Mac Pro ?

256GB SSD it shipped with will run low and one of the things to watch.
Default memory is 12GB also something to think about.
D500 and FCP-X 10.1+
http://macperformanceguide.com/index_topics.html#MacPro2013Performance
Five models of 2013 Mac Pro running Resolve, FCPX, After Effects, Photoshop, and Aperture

After Effects wont install on my Mac, I am running OS X, any ideas please?

After Effects wont install on my Mac, I am running OS X, any ideas please?

What version of AE? What Mac? What version of OS X? You need to be much more specific.
Mylenium

After effects wont install

I have a dell inspiron and after effects wont install. I had downloaded it before and it worked perfectly. But one day my computer had to reset itself causing me to re-download all my software. Everything downloaded perfectly except for my adobe softwares. Please help.

Sign out of your account... Uninstall... run the Cleaner...
-Restart your computer... Sign in to your account... Reinstall
-using the cleaner after uninstalling and before reinstalling is needed
-http://helpx.adobe.com/creative-cloud/help/install-apps.html (and uninstall)
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

How do I get after effects to render with my GPU?

Yea, really noob question, but I can't figure it out!
Spent literally HOURS trying to find how to do this.. Use my GTX 670 to render instad of CPU. Can't figure it out. I finally (I think) figured out where to change the setting to raytraced rendering, but it still REFUSES to use it. I can't work like this! Countless hours to render a 4 min video with an i7? I am checking with a hardware monitor, and my GPU isn't getting used.
I don't have the time (or inclination) to watch hours and hours of tutorial videos. I am the type of person that uses templates and modifies them to my needs/desires, so pointing me to a "generic" after effect tutorial website will do no good.
Now, I only mention this to show that I don't come running for help every time I have a small problem, and refuse to try and find the answer myself. I have myself learned how to edit text, make it appear and disappear. Slow down and speed up an entire composition and much much more all by using google. But I obviously can't get the wording right with google because I can't find a solution.

You cannot enforce GPU raytracing if your card is not supported and that is that. If adding the card to the raytracer_supported_cards.txt file and updating the graphics driver doesn't do it, then nothing will. You are using dead technology, anyway.
Mylenium

"Adobe After Effects CS5 Render Issues"!

Hey guys
I currently just downloaded the free trial of "Adobe After Effects CS5" and I am wanting to render some video which I added some colour correction to.
When I put this in the render queue and press render is says "You mus have at lease on render item queued in order to render". Also it says on status "Needs output"
How come this is happening, do I need to buy the full vision.
Cheers
ash

You haven't specified the output location or name. After Effects is telling you to do that.
Follow the instructions here.
I strongly recommend beginning here if you're new to After Effects:
http://blogs.adobe.com/toddkopriva/2010/01/getting-started-with-after-eff.html

After effects composition preview video not working correctly

Okay so, whenever I try to change something on the composition preview video, it doesn't work. I have to go to a completely different screen and go back to see what ive changed, and when I try to ram preview it doesn't even do anything but play the music. Im not very tech savy so I don't know any big words, so try and dumb stuff down for me okay? Please help me, Thank you.

Dude, just do your homework, okay? I, for one, refuse to "dumb it down". It's up to you to get smarter:
Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC)

Imovie templates, titles, ken burns effect wont render. why?

Hi I am having great issues.
Once my templates or ken burns effected pictures are in a timeline they wont render. Ive tried everything, but no rendering takes place. Just sits there and does nothing.
Ive even tried wiping imovie and reinstalling still does the same thing help!!!

Hi gregles76 - welcome to the forum!
Two possible angles on this:
1. You are not applying the KB effect correctly - make sure you are following the procedure shown in this tutorial:
http://www.apple.com/ilife/tutorials/imovie/im3-2.html
2. Were you trying to change the setting on photos that already have a KB effect applied? If you were, and you have emptied the iMovie trash after creating KB effects on your photos, you will not be able to further modify the setting, because of the way iMovie deals with the photos.

After Effects CS6 render error - grey artifacts

Hi there,
I was wondering if someone could help me? I am rendering out a video in After Effects using H.264 codec, High 5.0 Profile at CBR 5 and 25fps. However, on all occassions and with all videos, not just this one, when the video renders, many frames appear grey (see below);
I have tried rendering it out at various levels of quality, both CBR and VBR, and even using Adobe Encoder also, and the problem still persists. It is not always in the same place also and appears randomly. I was wondering if anyone else had come across this problem and had a solution?
I have re-sintalled the Adboe Suite on several occasion to try and counteract this, but again, the problem presists.
Any help would be greatly appreciated!
Thanks,
Ollie

It appears you are viewing your footage in Quicktime X, which in itself is not particulalrly sensible. Use the "classic" Quicktime 7 If it's okay there, then the file will work. Other than that this could be something with your source footage, your media cache, whatever. We cannot know. You are not nearly providing half enough info, so we end up guessing around. Also simply render to another CoDec and do the actual conversion in Adobe Media Encoder.
Mylenium

After Effects CC Render Errors with RED footage and ProRes 4444 proxies

Working on an 8 Core, 2008 Mac Pro with 16GB of RAM running Mountain Lion.
I just upgraded to After Effects CC and I'm having a whole bunch of errors ...
-- the 'MooV' file is damaged or unsupported
-- error getting package info for file "..." ( 3 :: 164 )
-- Error (4) reading frame from file "..." ( 86 :: 2 )
I'm trying to make ProRes 4444 proxies from RED files (sometimes as big as 4K), which will eventually end up in a 1920x1080 project. I'll make a 4444 proxy, work on it all day with no problems, then when I try to render (or save a RAM preview) any one of the previous errors will show up.
My projects seemed to work just fine fine in AE CS6, and I've worked with RED footage in AE before with little issue. I've completly restarted my system, re-installed everything, worked off an external drive, worked on my internal (software) RAID, rendered to local and external hard drives, adjusted my multiprocesser render settings (on and off), cleared the cache ... nothing is fixing it.
Does anybody else have any ideas? Or insight. Or anything?!
Thanks for your time,
Eliot

I'm working on a MacbookPro, Early 2013, OS X 10.8.4, and I'm having the same exact error:
However instead of using RED footage, I'm using a 3rd party plugin called Element 3D and Optical Flares from VideoCopilet.net.
I'm not sure if the bug is related, I'm just wondering if anyone else has any idea on how to fix this problem. I have a fresh install of CC so I can't downgrade to CS6.
Another error popped up during multiple trys in export:
In case the old file was actually corrupted, I checked all my backups that worked perfectly fine with CS6 in the past, and I get the same error when I copy them over to my hard drive on my mac.
My current setup is:
Processor: 2.8 GHz Intel Core i7
Memory: 16GB
Graphics: NVIDIA GeForce GT 650M 1024 MB
I really don't want to recreate this entire file from scratch. That would be a lot of hours wasted... any suggestions would be greatly appreciated.

After Effects CS6 - render files huge!

Ok I am tying myself in knots here.
I have a 7 second text animation on a plain background in After Effects CS6 which I want to export so I can use it in Premiere Pro CS6 withan alpha channel so i can superimpose it over video. The file is 1080P 25 because that matches my video. the first time I rendered it it came out at 89Mb which was fine. But I wanted to tweak the text positioning so I did that - now every time I render the file is around 1.5Gb!
I am using Windows so i can't render Quicktime with an alpha channel which means I have to use avi but what settings should I use? (Avi is the only format which allows me to export RGB + alpha).
I have to say that I have used many video programs in my life but I find After Effects the single most unituitive piece of software I have ever encountered. Why can't it give you an indication of how big your render file is likely to be to gvie youa t least some clue as to what settings to use?

See this:
http://forums.adobe.com/thread/684381
Start here to learn After Effects:
http://adobe.ly/AE_basics
> I am using Windows so i can't render Quicktime with an alpha channel
That is not correct.
You can install QuickTime on Windows and use QuickTime for output from After Effects.

After Effects Minimized Render Crash?

I am experiencing a very annoying issue pertaining to After Effects CS 5.5. I recently purchased the product (Production Premium CS5) and installed it on PC only to encounter a strange error. Whenever I do a preview render (pressing 0) and then minimize I then see the number of frames being rendered in the minimized window (this is normal). However, upon clicking the minimized window to reopen it After Effects crashes immediately with the error: After Effects error: "Crash in Progress.Lastlogged message was : <4924><ImporterMPEG><1>Error_printf:No Video Available". After effects gives me the option to save my work and notifies me to contact the Adobe Technical Support Center. I recently purchased this product I am disappointed that I cannot minimize the program while rendering, the program did not do this immediately, it started doing this a couple of days after I started using it.
I have already tried uninstalling after effects and reinstalling and i get the same error everytime.
My PC Specs:
8GB RAM
AMD 1100T Sixcore 3.3 Ghz processor
GTX 275 graphics card performance edition
Is there something I'm missing? Please Help me resolve this issue, After Effects is a good product.

It usually crashes with this log message:
"Crash in Progress.Lastlogged message was : <4924><ImporterMPEG><1>Error_printf:No Video Available"
I never changed anything with my system when this error occurred nor did I install a new driver, I didn't even install a new program or do any system changes.
I have OpenGL disabled but I get this crash with it on or off. I have even tried rendering a project where all I had was a square with keyframed position but I still get the same rendering crash/error when I minimize the window, therefore I don't think its an effect causing it or OpenGL.
Any Ideas?

After Effects wont render video completely

Similar Messages

Maybe you are looking for