After EFI firmware update the scrolling with two fingers doesn't work inside the browsers (both safari and chrome)
I've got a new MacBook Pro Retina from october 2013 13" (8 gb Ram and 256 gb SSD).
I had the "freezing" issue that was solved with the firmware EDI update.
But after this update i have now another problem: often during web browsing the scroll with 2 fingers up and down the page stops working (but the trackpad is ok for everything else and if i go in other programs the scroll works as usual). The only solution is to restart the browser but the problem happens again and again.
Both on Chrome and Safari. Especially on Safari everything freeze if i try to scroll on the right to go back to the previous page.
Does anybody else have this issue?
macmattia wrote:
I've got a new MacBook Pro Retina from october 2013
Does anybody else have this issue?
Doesn't matter if anybody else has this issue.
You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.
Similar Messages
-
How I can enable "turn the page" with two fingers
my problem is I want to enable the option to "turn the page with two fingers" to serve everywhere (Google Chrome, Finder, etc) but the problem is notserved with two fingers, serves only the option to turn pages if I put three fingers
Help!
All this happens in my macbook with OS X LionI had already tried that, but does not work, just when I put "three fingers" work everywhere, but when I put "two fingers" does not work in any place
-
The Cube with ID = Rate doesn't exist in the collection Error Message
When doing a Full Optimization in the Rate cube I get a "The Cube with ID = Rate doesn't exist in the collection" error message. What is causing this error and how do I fix it?
I have seen this error when reporting services was not properly configured. can you connect to http://servername/reports ?
If not try to fix reporting services first, this solved the problem for me in the past.
But usually in this case all the aplications are giving this error when modifying. Is this also the case in your appset?
Does Apshell work when you modify the application there?
-Joost -
I have an iPod 4th gen and the bottom part of it doesn't work where the space, .?123, and the go buttons are not working I droped it yesterday but it started doing this an hour ago I can slide to get in but it's stops working after that someone tell me how I fix this
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
The 'Partition' with 'ID' = 'FAC2CRDN' doesn't exist in the collection.
Hi,
When I am importing csv file system is showing me the following error:
[Admin-ProcessPartition]The 'Partition' with 'ID' = 'FAC2CRDN' doesn't exist in the collection.
I checked my OLAP database. Partition with id = FAC2CRDN exists.
Please help me to come our from this issue and Thanks.
Regards,
StanislavI would suggest you the following steps in order to see if your problem is fixed or if you still have some errors:
1) full optimize your application
2) try to full process the OLAP database directly from the Analysis Services management console.
Regards,
Simmaco -
The iPhoto Library Upgrader tool doesn't work. I've downloaded it, and follow the directions, but iPhoto still won't open.
Your Library is damaged.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
As for goign back: do you have an undamaged library?
Regards
TD -
i got problem updating my iphone 3g. my phone doesn't work now. it says no service and can not be activated.beside that it says insert sim even it has sim. please help me.
I have just created this account to tell you that nothing would change if you restored your phone.
The first NO SIM nuisance happened just a week ago. Nothing had been done to the phone before that. I pressed HOME + POWER buttons to restart the phone and SIM card was successfully recognized as if nothing had happened. Then I had a lucky week, not reminded of this issue at all.
Today, however, the same problem keeps annoying me. I've used the same method to heal the phone but all I have done seems more like a placebo. So I tried the ultimate solution, restroing it in iTunes.
Ridicuously, the moment I finished basic setup on the newly restored phone, the same NO SIM CARD INSTALLED message poped up.
So IMO, it's not what you should do to erase and restore your phone.
Plus, I called my native carrier and they said no such problems have been submitted. And since my nano SIM card is quite new (three months old), I'm not going to replace it.
I googled this problem and found something on a Hong Kong webpage. The author of that thread points out that there is a flaw in the SIM card tray that prevents the phone from successfully recognizing SIM cards.
And I really hope Apple could probe into this issue and give official solutions other than restarting / restoring the phone like an idiot. -
Hi, can someone please tell me why the spell check in pages doesn't work. I went to preferences and enabled this auto spell checker and have set the language to british english. But still it doesn't work while it works perfectly in TextEdit.
Inspector > Text > More > Language
Only applies to selected text, like making it a particular font.
It is not a setting that sticks. If you continue to paste in text from elsewhere particularly the Internet it will have a different or None language set to it. You need to select it and make it B.E.
Peter -
I have bought a new iPad 2 charger and it works absolutely fine but then I wanted to upload some pictures on the computer so I put the wire in the right places but it doesn't work so I tried my iPhone and it worked fine?
Plz answer as soon as possible
-
HDD clicking after EFI Firmware Update 2.7
After I did the EFI firmware 2.7 update and the my macbook pro restarted, I noticed that I started to hear a clicking noise from my laptop. At first, I thought it was a normal sound that I may have not heard before but I checked my other laptops and they aren't making any noise close to this. The other two laptops I checked were also early 2011 models, one 13" and the other is 15".
Here is the recording of the sound.
http://dl.dropbox.com/u/108564/iPhone/Memo.m4a
There is some background noise but that clicking sound is the sound I hear. This is recorded with my 4S with the mic hovering around the palm rest and trackpad. I also noticed that when I tilt the laptop, I can hear a grinding sound. I tried to replicate this grinding noise on my other MBPs but I can't replicate it.
What is the best option for me? If I take it to Apple, would they actually be able to replace it for me or resolve the issue? I don't want to waste my time driving 45 minutes to Apple just so they can say it's "normal". Has anyone had this issue before and taken it to Apple?Pretty nasty, sounds quite regular. Drives don't make that sound normally, sounds defective.
What is your machine specs, opeating system version etc.?
If your drive is grinding, that's a sign it's going to die soon, so you need to backup immediatly.
EFI 2.7 might not be the sole cause, especially if others don't come forward and report the same issue, but might have attributed to something pre-existing.
There has been a unusually high number of issues with the latest EFI firmware updates, why I don't know.
Perform a hardware check, rule out anything else.
http://www.cbscores.com/index.php?sort=ogl&order=desc
You might have a warranty call if the drive is failing. -
What can be done? Can I return to the older system? Bob
The "MySearchDial" app needs to be removed in 4 places.
1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal. -
forgot my adminpassword, i have tried the reboot with initial disk didn't work, i am able to get into my computer with name and password, but this same name and password doesn't work as an administrators password when i want to download or change things.
do you have any suggestions? Im about to give up, i can't even access wireless have to use a dsl
pretty sad... this same name and password doesn't work as an administrators password when i want to download or change things.
It's probably that your Keychain password is not the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered. -
Can no longer enlarge or shrink the screen.
Some gestures have been removed in Firefox 4.
You can restore the zoom feature by changing the values of the related prefs on the <b>about:config</b> page.
browser.gesture.pinch.in -> <b>cmd_fullZoomReduce</b>
browser.gesture.pinch.in.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.out -> <b>cmd_fullZoomEnlarge</b>
browser.gesture.pinch.out.shift -> <b>cmd_fullZoomReset</b>
browser.gesture.pinch.latched -> <b>false</b>
To open the <i>about:config</i> page, type <b>about:config</b> in the location (address) bar and press the "<i>Enter</i>" key, just like you type the url of a website to open a website.<br />
If you see a warning then you can confirm that you want to access that page.<br /> -
Hello,
I've done an ample amount of Internet research to find an answer to this problem however nothing yet found is quite like this. I will start from the beginning.
I am traveling through Europe, and I normally live in California. When I arrived in Ireland my MBP early 2011 15 inch, began crashing constantly when I had several tabs open on Chrome and maybe one or two low CPU/Memory using applications, nothing the 8gb RAM &750gb hard drive can't normally handle. Thus I began trouble shooting. I ran disk utility once started up and repaired both disk and permissions. Still crashing. It didn't seem like it had anything to do with a kernel panic shut down, I never would receive the usual message indicating so. After that I did an SMC reset. It was still crashing. I then upgraded the OSX from 10.8 to 10.8.4 believing it could help. It did momentarily, but then crash again. (When it crashes screen goes black suddenly and upon pressing power button does a regular boot on my single partition). I decided attempting to repair using the Internet recovery option but it appeared my MBP had not yet have it installed, so I downloaded from Apple and began installing. Here I made a mistake, I unplugged the power source as it was restarting. When the gray screen and apple appeared, the loading bar shows up as it says it will when installing the update, but when the bar fully loads it crashes every time. I've tried starting in safe mode, which then loads but never goes further (I let it stand for two hours such as that and nothing). Then I decided to allow the MBP to fully charge overnight to give it time and charge. This morning the problem has stayed the same, even with power source plugged in. Please help I need this to work.
Thank you and please ask any questions!Your constant crashing problem is probably some type of hardware fault which no update can fix. Doing the 10.8.4 update and then the firmware update just caused further problems. you need to take thr system to a apple store to be diagnosed and fixed if cost effective.
-
Sync with two computers doesn't work anymore?
Hi there
I used to sync with my iPOD with both computers that I use. Work and Home. that's because I mostly buy music with this work computer cause it has MUCH faster connection than I have @ home.
About a week ago I purchased John Lennon songs. Before that I had to update to iTunes plus (7.0.3) so I did so. Then I though that I just sync with iPod so I can get those songs to home computer as well. This has worked to this day without any problems. It syncs only purchased music, videos and games but nothing else and that is fine for me.
This time it was different. When I connected my iPOD to my work computer it sayd that if I want to sync this iPOD with my work computer, it must be fully erased first. Well that's not a bad idea so I did it. Then I got home and updated my iTunes and tried to sync it with that too to get Lennon inside it but no... It said that I now how to erase my iPod in order to use it with my home computer. and transfer john Lennon songs into it. I was like what the ****... this was working fine before this new iTunes.
So. Am I now totally slaved to use only one computer with iPOD?
If this is a standard way to do it today, then I just have to use 3rd party software to do it or just burn them to CD... But this is not why I get this device... I wanted this to be easy as ****.. Not a prison.You cannot "sync" with multiple computers, you need to use the iPod manually.
See this.
How to use an iPod with more than one computer.
Or are you trying to transfer iTunes purchases from iPod to iTunes?
You do this by using the file/transfer purchases menu in iTunes, but I think you'll still need the iPod set to manual.
Maybe you are looking for
-
Can I use iCloud on my Windows 7 pc when I don't have any other devices
I only have a Windows 7 pc and a Windows 8 laptop. Can I use iCloud on these two devices. I can't find anywhere to open an iCloud account.
-
Hey Guys... Currently I am working on one Xpath expression issue..as described below; Its a File to Idoc scenario ...where in I need to check the two Item level nodes and based on that need to produce the target Idoc. and my souce structure look lik
-
Options for QoS on 2 meg PPP lease line.
Hi, I have a 2 meg PPP data lease line bet my HO and BO. I need to know the Qos options, I can configure to run voice over the same link. I want to reserve 384K to voice traffic. Will auto qos be of any help ? Thanks renzil
-
Different behaviors of NSTask within Debug and Release configuraton
Hey there, I am writing my first OSX application. It will be a starter helper for some daemons. In order to start the daemons I am using NSTask but this class behaves completely different within the two build configurations (Debug and Release). If I
-
Video metadata in Bridge CS5.1
If I add keywords to a video file in Bridge CS5.1, does it add it to the file or keep it in a separate database (i.e. like Lightroom's default behaviour)? I'm looking for a good way to manage my home videos. Thanks for the help.