After EHP1 upgarde Maintenance Optimizer not work

Dear ,
In our solution Manger Maintenance Optimizer was proper configure and working . But After Implement or Upgrade EHP1 ,When I run tcode solution_manager for downloading some SP.Then click on Maintenance Optimizer its direct goes to http://hostname/client001......etc
After Implemention EHP1 on Solution manager 7.0 ,Should we configuer Maintenance Optimizer again. OR any post implementation step after EHP1 upgrade.
why it going to http://hostname/client001......
Now how I can download SP or Note from my solution manager in that EHP1 has been upgraded.
regards

I have upgrade solman 7.0 to EHP1 solman 7.01 SP26.
in etc/hosts IP address and Host name allready exist.
when Click on Maintenance Optimizer it goes on beow site
http://saprouter.domain.ext:8000/sap/public/myssocntl?sap-client=100
Where saprouter is my solman Host Name and Client 100 is where I am logging.
is any parameter changes required for resolve this problem
regards

Similar Messages

I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate? I am in Delhi, India.

Hi,
I have just got my first apple device, iphone 3G S. After iserting sim it does not work, cant go beyond first screen. How to activate it? I am in Delhi, India.Any suggestions.
Satish

would be best if you can download the guide here
http://support.apple.com/manuals/#iphone

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.

I have windows 7 and my speakers worked then after update my speakers do not work and everything checked out and says they are working and that soundcard is working but no sound now.
I have tried everything and nothing works.

sound problems:
#Restore speaker icon to System Task bar, right-click on clock or tray > Properties > Volume: On
#Click on the Sound icon in System tray then on Mixer, make sure Firefox is not muted [http://dmcritchie.mvps.org/icons/fx_sound.png picture]
<p>Additional references
* [https://support.mozilla.com/en-US/kb/No%20sound%20in%20Firefox No sound in Firefox | Troubleshooting | Firefox Help]
* [http://support.mozilla.com/en-US/kb/Video%20or%20audio%20does%20not%20play Video or audio does not play | Troubleshooting | Firefox Help]
* [http://kb.mozillazine.org/Video_or_audio_does_not_play Video or audio does not play - MozillaZine Knowledge Base]

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue?

I have installed windows 8 on my mac book pro with bootcamp 4 and the issue is whenever i open windows 8 , It hangs after 15 minutes and does not work . How to resolve this issue? Is it compatibility issue ?

Please also see Boot Camp: Set the default operating system.

I have downloaded skype, but after synchronizing with itunes skype not working, why?

i have downloaded skype, but after synchronizing with itunes skype not working, why? when I was synchronizing I believe there was some message in itune saying software not backed up or somethin to that effect.

Thanks for your response.
However, I did not find any solution to my problem.
in my phone the skype application skype is not opening up, same is the caseiwth mobile voip. Both these applications were downloaded last night and it worked then, but not working now.
Thanks in advance for anyone willing to help. I am new to the iphone.

Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

Dashboard widgets not working. I trash the dashboard .plist and redo all widgets then after a restart. Widget not working again.

Yes hello,
My widgets are not working as well, i looked on forms and it seams that the 10.5 update fix there problems. I also did an archive and install from 10.4... One of the major reasons i purchased the upgrade was to use widgets to clip parts of safari, i'am totaly bummed because all forums i find end with the question un answered. i'am a little bummed becuase there are a couple of things that worked with 10.4 that are not working in 10.5 (like some meg moives not playing.
i do not wish to create a new account because i do not want to reinstall all my software, photoshop, final cut, dvd studio pro.. etc.
i hope to find the fix some how.
I have opened up the console application and when i select widgets load or delete them i see no activity in the console. I'am not familiar with the console app. or command lines.
is there any more info on this matter? is there any support from apple?
Thankyou

After downloaded iOS7 my iPhone not works properly

After downloaded iOS7 my iPhone not works properly. Keyboard clicks- no sound, Skype not at all, viber ring sound, volume I can not move although the bottoms work properly etc etc etc etc. because all these problems I don't want to download iOS in my iPad. When we can fix it, and how. I need a really answer for apple. I just need to do one thing to see if it work restore to a fabric and copy again everything, but I've heard from people who has made it and nothing.
Thanks

no reply from anyone

Maintenance plans not working

We have SQL server 2008 r2 and though the maintenance plans initially worked as they should, they stopped working when we installed SSRS. When I try to do almost anything with any of the plans, I get this error:
TITLE: Microsoft SQL Server Management Studio
Could not load file or assembly 'msddsp, Version=9.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified. (Microsoft.DataTransformationServices.Design)
These are the version details of our server:
Microsoft SQL Server Management Studio      10.50.4000.0
Microsoft Analysis Services Client Tools      10.50.4000.0
Microsoft Data Access Components (MDAC)      6.1.7601.17514
Microsoft MSXML      3.0 6.0
Microsoft Internet Explorer      9.0.8112.16421
Microsoft .NET Framework      2.0.50727.5448
Operating System      6.1.7601
I have researched this and have been nowhere near a true solution to this thus far. Additionally, I am leaning toward simply reinstalling the whole management studio, but I have MANY SSRS reports that I simply cannot afford to lose or compromise.
Any thoughts on how to finally fix this problem that I am having will certainly be appreciated.
-Chris

Hi Chris,
The above error occurs if the msddsp.dll is not available in the Global Assembly Cache (%windir%\assembly\) or if the dll was not properly registered. To work around this issue, please follow below steps.
1. If you encounter this error when using the SQL Server Management Studio (SSMS) on an IA64 machine, please install it on a different, non-IA64 machine and administer the SQL Server instance remotely. And make sure that SQL 2008 R2 client tools are installed
as the same version &pacth level as the SQL Server instance.
2. If you encounter this error when using the SSMS on an non-IA64 machine, check if msddsp.dll exists on your system. If it doesn’t exist, follow step 7 in the
KB article to install it into the GAC .
3. Check that if the .NET Framework is corrupted on your system if the issue still persists after performing above steps . You can verify the installation state of the .NET Framework via the
.NET Framework Setup Verification Tool. If the .NET Framework is corrupted, please
repair it using
.NET Framework Repair Tool.
Reference:
http://solveissue.com/note?id=1596753
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support

Table Maintenance(SM30) not working for a custom View..

Hi,
I have the below case which is not working at the moment.
we have standard table T024 and the requirement is to update the table directly in production. To update the standard table i have created a custom maintenance view on this table and created a table maintenance generator for custom view.
In maintenace status tab of view i have maintened below information:
Access                                                 read, change, delete and insert
Delivery class                                       A
Data Browser/Table View Maint.         Display/ Maintenance allowed
The table maintenace generator has been also created but when trying to modify it is giving below message
"Client 210 has status 'not modifiable"
We have two clients in dev server 200 -for development
                                                        210 - for development testing
In development it is working but in development testing client and in quality it is not working.
Can you please help me as to why we are getting the above message?
Best Regards,
Rajesh

Hi Rajesh,
That is coming because of the Table Maintainance Generator Settings. You have to chose no, or user, recording routine then system will not generate any request and you can update the data. This is actually a BASIS settings in SCC4, so that for customizing tables system should not generate any request.
Thanks & Regards,
Faheem.

After update insert trigger is not working correctly

Hello experts!
I created an after insert/update trigger and what strikes me is that it is not working as expected.
The trigger launches a procedure that does an insert in a second table if values in the triggered table ("my_table") are altered.
The problem is that the values in my second table, which are correlated to "my_table", are not changed with the correct values right away. The trigger and insert trails behind!
I have to update twice for the values to appear in my second table. Only then, the data of the first update will be inserted into the second table wheras the parent table ("my_table") will hold the latest values.
Do you have an idea what could be wrong?
create or replace
trigger myscheme.after_update_insert_set_tw
after update or insert
on myscheme.my_table
for each row
declare
begin
pr_my_table_tw_sync_sk(:new.lng_falle, :new.int_fallennummer, :new.lng_schaedling, :new.objectid);
end;Brgds,
Seb

Okay I'll give my best to explain what my procedure is supposed to do and what the table structure is like. I hope it'll help you to help me :-)
My parent table is called fangzahlen and is created as follows:
CREATE TABLE "BORKI"."FANGZAHLEN"
   (     "OBJECTID" NUMBER(10,0) NOT NULL ENABLE,
     "LNG_FALLE" NUMBER(10,0) NOT NULL ENABLE,
     "LNG_BEARBEITER" NUMBER(10,0),
     "DATE_DATUM" DATE DEFAULT SYSDATE NOT NULL ENABLE,
     "INT_FALLENNUMMER" NUMBER(4,0) NOT NULL ENABLE,
     "LNG_SCHAEDLING" NUMBER(2,0) NOT NULL ENABLE,
     "INT_VOLUMEN" NUMBER(10,0),
     "INT_ANZAHL" NUMBER(10,0),
     "INT_ANTEIL_JUNGKAEFER" NUMBER(3,0),
     "BOOL_KOEDERWECHSEL" NUMBER(1,0),
      CONSTRAINT "PK_FANGZAHLEN" PRIMARY KEY ("OBJECTID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255 COMPUTE STATISTICS
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE,
      CONSTRAINT "CHECK_DATE_DATUM" CHECK ("DATE_DATUM" >= '1.apr.2006') ENABLE
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;It holds values such as:
OBJECTID,"LNG_FALLE","LNG_BEARBEITER","DATE_DATUM","INT_FALLENNUMMER","LNG_SCHAEDLING","INT_VOLUMEN","INT_ANZAHL","INT_ANTEIL_JUNGKAEFER","BOOL_KOEDERWECHSEL"
97548,"39","1081","08.04.10","1","2","","220","","0"
97534,"39","1081","06.04.10","1","2","","100","","-1"My subtable is called tbl_test and created with:
CREATE TABLE "BORKI"."TBL_TEST"
   (     "OBJECTID" NUMBER(12,0) NOT NULL ENABLE,
     "LNG_FALLE" NUMBER(10,0),
     "DATE_DATUM" DATE,
     "INT_FALLENNUMMER" NUMBER(4,0),
     "LNG_SCHAEDLING" NUMBER(2,0),
     "INT_VOLUMEN" NUMBER(10,0),
     "INT_ANZAHL" NUMBER(10,0),
     "LNG_FANGZAHLEN" NUMBER(12,0)
   ) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;Okay, this were the prerequisites!
Let's concentrate on the trigger and procedure:
The purpose of the procedure is to insert data into tbl_test once a record in "fangzahlen" has been updated or inserted.
Tbl_test holds the mean average values (int_anzahl) for a number of collected items (lng_schaedling).
I need to insert date values for the combination of each lng_fangzahlen, lng_schaedling, lng_falle and int_fallennr into tbl_test.
If I had the following data in table fangzahlen:
97548,"39","1081","08.04.10","1","2","","220","","0"
97534,"39","1081","06.04.10","1","2","","100","","-1"the query in the insert section of my procedure returns the following data when run manually:
97534     31.03.10     16,667     (null)     1     39     2
97548     06.04.10     110     (null)     1     39     2Now, I need to generate the dates between the first and the second objectid (column 1 in the data above).
Hence,
97534     31.03.10     16,667     (null)     1     39     2
97534     01.04.10     16,667     (null)     1     39     2
97534     02.04.10     16,667     (null)     1     39     2
97534     03.04.10     16,667     (null)     1     39     2
97534     04.04.10     16,667     (null)     1     39     2
97534     05.04.10     16,667     (null)     1     39     2
97534     06.04.10     16,667     (null)     1     39     2
97548     07.04.10     110     (null)     1     39     2
97548     08.04.10     110     (null)     1     39     2
My problem is thatthe values above will only appear after I do another update to table fangzahlen or insert a new record into it. Theoretically the result above should be inserted right away?
Below is my procedure, which might give you a better idea of what I am trying to do! Please excuse this rather awkward explanation. If you need more info please don't hesitate to ask for it!
create or replace
Procedure "PR_FANGZAHLEN_TW_SYNC_SK"
    Pr_falle        Number,
    Pr_fallennummer Number,
    Pr_schaedling   Number,
    Pr_objectid     Number)
Is
Y                Number (10);
pragma autonomous_transaction;
Begin
-- first all records should be deleted from the subtable i.e. tbl_test
    delete from borki.tbl_test where lng_falle = pr_falle
        and int_fallennummer = pr_fallennummer
        and lng_schaedling   = pr_schaedling
       and date_datum       > '31.03.2010';
      commit;
      For Rec In
      (select objectid lng_fangzahlen,
        date_datum,
        prev_date,
        (date_datum - prev_date) difference_in_days,
        round((
        case
          when nvl(int_volumen,0) > 0
          and lng_schaedling      = 1
          then int_volumen * 40
          when nvl(int_volumen,0) > 0
          and lng_schaedling      = 2
          then int_volumen * 550
          when nvl(int_anzahl,0) > 0
          then int_anzahl
        end ) / (date_datum - prev_date),3) counted_bugs,
        int_fallennummer,
        lng_falle,
        lng_schaedling
      from
        (select objectid,
          date_datum,
          case
            when lag(date_datum) over(order by date_datum) is null
            then to_date('31.03.2010')
            else lag(date_datum) over(order by date_datum)
          end as prev_date,
          int_volumen,
          int_anzahl,
          int_fallennummer,
          lng_falle,
          lng_schaedling
        from borki.fangzahlen
        where lng_falle      = pr_falle
        and int_fallennummer = pr_fallennummer
        and lng_schaedling   = pr_schaedling
        and date_datum       > '31.03.2010'
       -- and objectid         = pr_objectid
        order by date_datum desc
      order by date_datum asc
      Loop
        Y := 1;
        While Y < rec.difference_in_days + 1
        Loop
          Insert
          Into tbl_test
              lng_fangzahlen,
              date_datum,
              int_anzahl,
              int_volumen,
              int_fallennummer,
              lng_falle,
             lng_schaedling
          select objectid lng_fangzahlen,
        prev_date +Y,
        round((
        case
          when nvl(int_volumen,0) > 0
          and lng_schaedling      = 1
          then int_volumen * 40
          when nvl(int_volumen,0) > 0
          and lng_schaedling      = 2
          then int_volumen * 550
          when nvl(int_anzahl,0) > 0
          then int_anzahl
        end ) / (date_datum - prev_date),3) counted_bugs,
        int_volumen,
        int_fallennummer,
        lng_falle,
        lng_schaedling
      from
        (select objectid,
          date_datum,
          case
            when lag(date_datum) over(order by date_datum) is null
            then to_date('31.03.2010')
            else lag(date_datum) over(order by date_datum)
          end as prev_date,
          int_volumen,
          int_anzahl,
          int_fallennummer,
          lng_falle,
          lng_schaedling
        from borki.fangzahlen
        where lng_falle      = pr_falle
        and int_fallennummer = pr_fallennummer
        and lng_schaedling   = pr_schaedling
        and date_datum       > '31.03.2010'
        order by date_datum desc
      order by date_datum asc
          commit;
          Y := Y + 1;
        End Loop;
      End Loop; -- end of cursor
Exception
When No_data_found Then
    Null;
When Others Then
    -- Consider logging the error and then re-raise
    Raise;
End "PR_FANGZAHLEN_TW_SYNC_SK";

After Logon on Database Trigger Not Working From Client Terminal

Hi Every One
I Have a Problem, I'am Using Oracle 10g R2, I'd Written After Logon on Database Trigger, I'd Written The Trigger Under The Under The User With DBA Privileges, and it is work Fine, but it is work only when i Logon On The Database from The Server Terminal with any user, and If Logon From any Other Terminal It Is Not Work,
Can any One Know The Reason, Please Help me
Yasser Mokhtar

Please post the trigger code.

After upgrading, Adobe reader is not working.

After upgrading to 10.10.2, Adobe reader is not working. It is asking for user agreement to be signed. I cannot find this again. I have uninstalled and re-installed but still does not appear. I have tried to contact Adobe with no luck. Can anyone help please?

Since you are running OS X 10.10.2, you do not have an iMac (PPC) so you have posted in the wrong forum. I have requested the Hosts to move your post to the correct forum where hopefully someone will see it and help you.

After Effects CS4 Sniffer_gpu is not working

After Effects was working fine a few minutes ago and then the next time I started it up it suddenly gave me this message that sniffer_gpu had stopped working. After that, it said something like "After Effects can't continue:sorry. After Effects have crashed". I've been searching all over the internet only to see that no one was able to solve my problem! During the time where it last worked and the time where it began to NOT work, I did not install any weird software or close down anything - I was simply trying to open a project file.
After Effects did not work even after I've ran a deep care scan on Advanced SystemCare Beta. And I have no idea how to access the "product details" of my computer to give further information. Please help me, guys! I need an answer ASAP!! I'm a book trailer maker and I need After Effects working! I have a deadline I need to meet! >.<

Uhhh... you have to restart the system? I always put my computer on hibernation since I have lots of programmes working mid-way and I don't want to close them and then find out where I last stopped. Is hibernation bad? I tend to get Windows Updates and within a few hours my anti-virus software goes from A grade to D grade!

After updating Mavericks camera functions not working. Help!

HI! i just installed OS X Mavericks and now my camera is not working, neither in Skype neither in photo booth and so on... what can i do? thank you

After tesing in a new account, if the problem is still there, try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
iSight - Troubleshoot

After EHP1 upgarde Maintenance Optimizer not work

Similar Messages

Maybe you are looking for