After EHP6 upgrade in SAP ECC6.0 Stocke not get updated in MMBE after Partial UD

Hello Experts,
Recently we have upgraded our system to EHP6 on ECC 6.0 facing issue in MMBE. We have given Partial UD. after partial UD, some stock suppose to move in Blocked stock as per UD code customization. surprisingly stock not moved to Blocked stock. same is updating through Mb1b transaction.
Thanks in Advance !

Hi,
Check what have you maintained in QM inventory posting in Configuration.
Follow the path: QCC0> Quality Inspection> Inspection lot completion> Define inventory posting.
Movement type 350 should be maintained against VMENGE04 in Q Stock.
ntn

Similar Messages

Stock not getting updated after confirmation of order

dear all
In our scenario x is final product.x1( semifinished),x2(spare) are dependent materials for final product. x1 has bom r1 and r2 (raw materials).I put all x1,x2,r1,r2 stock available in storage.
To get final product , only final assy of above materials by labour.PIR (md61) created for x and planning run.After planning run, planned order generated for x and converted in to production order and released.
My requirement is on confirmation of production order, backflushing of dependent materials as per bom should be done.
On confirmation of order in co15,saved.But, stock is not getting updated.what might be the reason? please give me some solution

Hi
1.Set the Back Flush Indicator in your Material Master for the components. ( You can do this in Work center and Production Order too )
2. You can also set the flag for the field " All Components" in Order Confirmation Parameters (OPK4).
3. If you want to post the Fert also at the time of confirmation use the Control Key which has " Auto GR" enabled.
While confirming the Order press the Button "Goods Movement" to ensure that the components are present there for the movement.
Regards
Krishna
Regards
Krishna

Stock not getting update

hi,
i have done sub-contract process, in which after completion of MIGO (101 - 543 mvt), document had posted.
however in MMBE there is no stock.
MC.9 - stock is available
reg
mrs

hi
If you are ordering material for stock than only stock will be updated after goods receipt.
But if you are purchasing material with item category K, i.e. cost center, than u r ordering material directly for consumption. so it will not be updated in your stock. it will be shown as consumed by cost center K, as soon as you do goods receipt for the same.
This is why , your stock is not getting updated with PO with cost center item category.
you can also check in other way
Goto OMJJ and give the reuiqred movement types and check the VALUR and QUANITY UPDATE should be checked
Also you can check in OMS2 the VALUE and QUANITY update is checkd or not for MATERIAL TYPE
Regards

CPS parameters are not getting updated in SAP

We have recently migrated our SAP and CPs servers, after that we are facing few CPS issues and it is affecting lot of key batch jobs. One typical example is given below.
CPS is supposed to trigger a job DD simulation, by copying the SOURCE_DATE_ID -1-Dec-2006 and modifies the parameters BUDAT and FAEDA_HIGH. The parameter FAEDA_HIGH is calculated as time.now()+ 5 working days as defined in the expression. When we try to run the job today with the date 24 Dec 2010, CPS has calculated the FAEDS_HIGH correctly as 2-Jan-2011. IN SAP the variant gets created but for the field FAEDA_HIGH the date value is not getting updated properly it is display some other date. (e.g) It is showing as 4-jan-2011, I removed the xpression and gave another date for the FAEDA_HIGH field as 10/01/2011, but in SAP it is not getting updated.
Has anyone faced similar kind of issue. share you experience
Regards,
Ramprasad.

Hi ,
PLease find attached out XBP version
XBP connection pool for SAP system ISU
XMI interface version           : 2.0
Since we have taken backup and restored the SAP Database, the CPs transport file already exists in the System.
Basically what happens is
So actually what is happening is, the CPS parameter FAEDS_HIGH expressions are not used for due date calculation.. CPS just copies the source date-id to target id and similarly for the due date based on the difference
source_id variant date 01-12-2006   due date 02-12-2006 ( Next day)
Target_id Variant date 25-12-2010 due date 26-12-21010 ( Next Day)
I tried changing the Source date id from 01-12-2006 to 24-12-2010.
Source Variant date 24-12-2010   due date 04-01-2011 ( 10 Days)
Target Variant date 25-12-2010 due date 05-01-2011 ( 10 Days)
Regards,
Ram

When MSKA (Sales Order Stock) table get updated?

Hi,
May I know when MSKA(Sales Order Stock) table get updated?
Regards,
thiyagu

suppose a sales order has been created of 10 MTS and Production Person give me 5 MTS against the sales order by creating Planned Order& Production Order wrt Sales Order,then 5 MTS will be updated into Unrestricted - Use.
If suppose Material is Return Delivery ,then after MIGO , it goes to Quality Inspection,then this Quantity will Updated in to Stock in Quality Inspection .
Hope ,it will help you.
Best Regards,
Ankur

Stock value is not getting updated in APO system From ECC automatically

Hi All,
Stock value is not getting updated in APO system From ECC automatically but if we do it manually from transaction CFM2 it will get updated.
for this we are using EXIT_SAPLCSTK_001.
I am using VL10A for delivery and VL06G for PGI
I have also checked integration model for material and stock.
Please help me out as it is very urgent.
Thanks,
Gaurav Mittal
Edited by: GAURAV MITTAL on Feb 6, 2008 6:09 PM

Hi,
for transferring the stock data from R/3 to APO automatically, you need to have the integration model for material and stock activated.
please check the same.
if this does not help, let me know in detail the steps which you are following..
Ram

Values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

values are not getting updated in 'stocks App' in my i4 phone. What is the solution?

you have encountered activation lock. Read iCloud: Activation Lock

Open Sales Order values not getting updated after run RVKRED77 & RVKRED88

Hiiii,
In Production Server. We run the reports RVKRED77 & RVKRED88. Credit info structure and and Open Sales Order values not getting updated. In FD32, Status - Sales value it showing '0". At the time of creating Sales Order Dynamic Credit check not happening coz of Tables S066 not updating. Please provide me Solution.
Best Regards,
Sridhar . P

Dear Heagal,
I followed your suggestions and implemented in the Development and moved the changes in to Quality Server. I tested it thoroughly by creating New Customer and maintained Credit Limit. I come to know that Problem is in all Servers. I made 3 changes.
1. In Pricing Procedure Sub Total A it was not maintained against Net value. I placed it.
2. Removed Credit groups for Delivery Type.
3. In OVA8 i maintained Max. Doc Value :99,999,999.00 before it was with 1.00
I checked the OMO1 Settings it was Asynchronous. As SAP Notes Suggesting to use Synchronous but here it's a client setting. So, It's Can't possible to change. Changes will affect other Company Codes.
Tested both in DVP and QTY Dynamic Credit Check is working Perfectly and Status in FD33 Sales Value field getting update.
If i move these changes in to Production, Will i need to run the reports again or not? How it will affect on Old Cusomer Billing and Credit Limit data. For few of the Customers the Credit Limit data it was exceeded. Please provide me advice. The issue need to be Solved immediately.
Best Regards,
Sridhar

Moving Average Price does not get updated for Project Stock

Hello Experts
We have an Engineer-to-Order implementation for our client. Accordingly procurement is done per project. Each Project issues its PRs which are then converted to POs and recieved into Project Stock.
While assigning the material to the Network activity in Project (using material component) the system uses the price found in the material master (MAP or STD) as a planned cost appended to the project.
Problem:
while procuring the material, when we receive it into Project Stock (Mvt 101 Q + ) the Moving Average Price in the material master does not get updated. this way all newly created material master will never have a moving average price, thus whenever we try to assign them to the project we receive an error message (Cost for Material Component ###Mat.Num### cannot be determined.
Question:
How can I get the system to update moving average price (for all types of stock) based on procurement for project stock.???
Your help is kindly appreciated.

I'm sorry for the confusion
Case:
The T-code is CJ20N Project Builder in PS module
we are assigning material components to network activities under a certain WBS element in the project.
there is a function in the Project Builder to calculate the cost of a network. it uses the costing variant assigned to the network which is PS02 (We get the error here)
The costing variant has a valuation variant which lists a series of strategies to get the material price. Planned 1 if not then STD if not then MAP. (you can choose between many options via a drop down menu) you can choose 5 consequent options.
The MAP that the valuation variant is coded to get is the Plant Stock MAP -- Or the Project Stock MAP but only Per WBS element.
The MAP that the Actual postings update is the Project Stock MAP only Per WBS element.
This means that if you use a material component to purchase material 123 Acc.As. Q for WBS X for 10 $ then you try to assign a new material component with the same material 123 to WBS Y, the system will not get a MAP. because it's stored in QBEW per WBS element.
This way the system will never get the MAP right.
However, we don't always use project stock to procure for projects, for some requirements we can assign and use plant stock as well for Projects. that way we need the MAP from plant stock.
In the Valuation Variant you can use a User Exit Strategy. The user exit's name is COPCP005
My Suggestion is:
Use the User Exit COPCP005 to calculate the { Total value / the total quantity (MAP) from QBEW + Total value / total quantity (MAP) from MBEW } / 2
which is the MAP for both plant and project stock together, since that we are going to use both.
Q: Is this correct !?

I paid for upgrade on iphoto, now i can not get iphoto back after deleting it

i lost up grade on iphoto. now can not get it back. the computer tells me that my mac system needs to be greater than what i have. i need iphoto.

What version of iPhoto? What version of the system? Where did you get the upgrade?

SAP BUS2012 Rejection Stop not getting triggered

Hi experts,
I am facing one particular problem. When I am rejecting a PO, by default , REJECTION_START event of BUS2012 is getting triggered, I can see it in SWEL. But when I am cancelling the Rejection REJECTION_STOP event of BUS2012 is not getting triggered. Its not even coming in SWEL(Event trace).What could be the reason as every thing is standard, no custom work.

Hi,
That's strange. Where did you get this idea that this event should be created? (Well, I can see it also in SAP documentation.) And are you sure you are doing the rejection cancellation correctly (well, I don't know how many ways there could possibly be..) - the status of PO is changed, etc.?
SWETYPV should not have anything to do with this problem. The event is either created or not. SWETYPV is about how to react to events after they are created.
Are you sure that there is no filter set up in SWELS for the events. Perhaps the event is created but you cannot see it in SWEL due to a filter.
Regards,
Karri

MMBE stock overview - S Loc Level stock not getting displayed - ECC 6 0

Hello,
In ECC 6,0 Version, in the MMBE (stock overview) stock is getting displayed only at the Plant level. It is not showing at levels below for eg. S Loc level/Valuation type level. Is there any setting to be activated for this?
Can any one throw some light?
Thanks
Regards
Kumaran

Hi
Before executing MMBE
have you selected on the initial screen the following :-
Selection of Display levels
COCD
Plant
Storage location
batch and
special stock
thanks
Prasanna
awrd if usefull

SAP Fiori Purchase Order not getting any data & getting a 404 Error Message

Hi
I have downloaded Purchase Order SAPUI5 code from SAP Fiori server. import it into Eclipse then try to run that Apps/code(SAPUI5) from browser.
1) Not getting any Data.
2) It show 404 Error Message.
3) Its show wrong User Name as Login

Hi Pankaj,
First question :
Are you able to get the data in Fiori ?
Secondly,
You have mentioned as Purchase order, but here you have given snapshot of Purchase requisition app, and you are calling also purchase req app from the browser. Please clarify
If you have mistakenly written PO : If you are still not getting data for Approve Purc req, then check if your RFC connections are proper from Gateway to backend and backend to Gateway.
If RFC is working fine, check the Remote logon, it should be marked as Current user. If its not marked as current user, then it will show some other user.
Regards,
Tejas

Upgraded LR5B to LR5, LR5 will not download updates. Wants ACR 8.1 for Panos

I paid for a download of LR5 upgrade from LR5-beta, LR5 will not connect to the server for updates and when I try to send photos to CS6 for a panorama, it can not find ACR 8.1??

Should work from CS6 to update ACR to 8.1. If not, you will find some help and a direct link here: http://blogs.adobe.com/lightroomjournal/2013/06/camera-raw-8-1-and-dng-converter-8-1-now-a vailable.html and there is no need to sign for the cloud to update current CS6 AFAIK.
As DdeGannes already said, for LR5 there are no updates available so far.
.. and here: http://blogs.adobe.com/crawlspace/2011/03/keeping-photoshop-up-to-date.html#notconnected

SAP WM Preallocated Stock Not bypassing GR and Putaway in GI Area

Hi,
I have maintained the following to bypass the put away into GI Area in ECC 6.0
1. Preallocated Stock maintained for the material in the Preallocated stock Table V_T310 using LT51.
2. Movement type 101 is set to consider the preallocated stock.
I created the Put away TO and the preallocated button is enabled and the I could calculate the selected quantity. However the put away is going to the final destination bin. It is not bypassing the normal put away bin and goes to the GI area even though I have an open reservation for the same material.
The GR and GI are working as per our put away and picking strategy.
The actual quantity is updated for each GR. As soon as the Target quantity and the Actual quantity are same, then the preallocated stock table record for the material is deleted.
But our requirement is to bypass the normal put away destination bin and move GR quantity to GI Qty.
Am I missing any settings? Has anyone used this functionality?
Your input will be highly appreciated.
Regards,
SP0526

Subbu,
Please neglect my previous post, no need for setting the indicator for GI WM-movement type.
I have maintained the following to bypass the put away into GI Area in ECC 6.0
1. Preallocated Stock maintained for the material in the Preallocated stock Table V_T310 using LT51.
2. Movement type 101 is set to consider the preallocated stock.
I created the Put away TO and the preallocated button is enabled and the I could calculate the selected quantity. However the put away is going to the final destination bin. It is not bypassing the normal put away bin and goes to the GI area even though I have an open reservation for the same material.
The GR and GI are working as per our put away and picking strategy.
The actual quantity is updated for each GR. As soon as the Target quantity and the Actual quantity are same, then the preallocated stock table record for the material is deleted.
But our requirement is to bypass the normal put away destination bin and move GR quantity to GI Qty.
Your problem is not clear.
- First you say that the quantity goes from GR interim storage type directly to GI interim storage type (e.g. from 902 to 911)
- After that you say that you don't want to putaway the goods into the nromal storage bin but directly to the GI interim storage type
So, first you say your requirement is fulfilled then you say you want to fulfill your requirement.
Please clarify this. (maybe I just can't understand what you want)
As per your description your system is working properly.
Regards,
Csaba

After EHP6 upgrade in SAP ECC6.0 Stocke not get updated in MMBE after Partial UD

Similar Messages

Maybe you are looking for