After ejecting SD card by pulling it to trash in iphoto, the wheel is spinning. How do I get it to stop? What happens if I force quit it?

After ejecting SD card by pulling it to trash in iphoto, the wheel is spinning. How do I get it to stop? What happens if I force quit?

Similar Messages

I have a macbook with Iphoto 8.1.2. How do I get it to stop importing duplicates even after I checkbox tell it not to.

I have a macbook with Iphoto 8.1.2. How do I get it to stop importing duplicates even after I checkbox tell it not to.

How do I get it to stop importing duplicates even after I checkbox tell it not to.
That checkmark will only prevent iPhoto from importing exact duplicates - the exact filename, image format, exactly the same size,
What kind of duplicates are you asking about? Have the files been renamed or converted in any way?

I purchased an album and all of it downloaded except for one song. after a few auto attempts an error message comes up saying the file is corrupted. how do i get the song i paid for?

i purchased an album and all of it downloaded except for one song. after a few auto attempts an error message comes up saying the file is corrupted. how do i get the song i paid for?
oh the error msg error= -100000

I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not downloading properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

Received a $50.00 iTune Gift Card their are one digit printed in half the other is missing how can i get missing numbers.

Receive a $50.00 iTune Gift Card their is a digit half printed can't make it out and one more number is missing, think their should be16 digits am i not correct.
What can i do.

You have posted this in a discussion forum dedicated to iTunes Match. What I would recommend you do though, is to call Apple customer support, e-mail them, or if you are near an Apple store, take the card in to them so you can show them what you have.

After an automatic upgrade, all my bookmarks are gone, none of the troubleshooting answers help - how do I get them back?

I just simply turned on my computer and clicked FireFox as always. Looks like some updates installed and now all my bookmarks are gone. I've looked at all related troubleshooting answers and nothing works. How do i get my bookmarks back?

A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*http://kb.mozillazine.org/Lost_bookmarks

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?

When I first attached a cable from iphone6 to hdmi on tv, I was able to read kindle on tv. After watching movies and playing Pandora from iphone to tv through the cable, I can no longer read kindle through it. What settings do I need to change?

Hi,
Already mentioned on the following post:
http://h30434.www3.hp.com/t5/Other-Notebook-PC-Questions/VGA-on-laptop-HDMI-on-TV-needs-connected/m-...
You need a CONVERTER, not ADAPTER The setup:
The following list may help:
http://www.ebay.com.au/sch/sis.html?_kw=HDMI+To+VGA+COMPONENT+Adaptor+A+V+Digital+Converter
Laptop (VGA) ---- Converter from VGA to HDMI ------ TV
You also need sound, you can buy a converter with sound OR connect sound directly from laptop to TV.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Nokia Lumia 928 apparently died after an attempted Windows 8.1 update. Replacement phone arrived the next day. How can I restore my contacts, photos, etc.? Backup assistant is no help and I don't know how to access the Cloud.

Nokia Lumia 928 apparently died after an attempted Windows 8.1 update. Replacement phone arrived the next day. How can I restore my contacts, photos, etc.? Backup assistant is no help and I don't know how to access the Cloud.

Did you have the phone set to backup things to the One Drive on Microsoft servers?

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

My iPad2 is not working after an unsuccessful update to the new iOS6. How do I get working?

- Try resetting the iPod. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Download/install a new app
- Restore from backup
- Restore to factory daults/new iPod.

After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine:Are you sure you want to back up to the same device your original data is on? the WD disk has mounted??

After reformatting my 1 Tb WD ext drive and tinkering with the "exclude these items" list, I now get the following error message from Time Machine: "Are you sure you want to back up to the same device your original data is on?" I've reformatted in Disk Utilities...not sure what I did wrong. Any help would be appreciated.

Not sure what you mean by "booted" from it.
If the Mac OS is installed on the external drive, then it's possible to start up from it, just as you do from your internal drive. Please open the Startup Disk preference pane in System Preferences, and verify that your internal drive is selected as the startup disk.
Assuming that's the case, then it may be that your TM settings have been corrupted. Turn off TM, then move or delete the file /Library/Preferences/com.apple.TimeMachine.plist. Turn TM back on, recreate your settings, and try again.

Safari on my iPad 4 opens the latest page used rather than my home page. This is new ,after I updated to IOS 8.3.How do I get it back to what it was?

Safari on my iPad 4 opens the latest page used rather than to my home page.
This is new ,after I updated to IOS 8.3.How do I get it back to what it was?

You're welcome. You're not alone. The change has left alot of people scratchiing their heads wondering why. Maybe if enough people leave feedback at the link below it will be changed.
http://www.apple.com/feedback/

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

When I send an email, a photo appears after my name in the sender line. How do I get rid of it?

I don't have a signature set up, but did a little research. Someone posted that these will show up when I send an email to myself, but will not show up when sent to another person. I sent a test email to a friend to check for sure.

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...

After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
And I need to reboot everything from the power button...
It's just the second time it happens. What it depends from?

Hello DarlinDodson,
I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen

TS3274 My iPad has a white screen after trying to restore. I try and restore again and the same thing happens and we are back at the white screen. How can I get it back.

My iPad has a white screen after trying to restore. I try and restore again and the same thing happens and we are back at the white screen. How can I get it back?

type HT4097 in the search bar. its unable to update or restore iOS. Follow the instructions and if that does not work then id go to the local apple store.

HT204306 After I updated my iPad Friday 4/24/2015 my iPad is always asking for my Apple password. This is a pain in the neck. How do I get it to stop doing this?

I am frequently being asked by my iPad for my Apple ID. This has only happened since the last update which I installed 4/24/2015. I checked the settings but can find no way to disable this new feature. It is very annoying. How do I get it to stop asking for my ID?

Hello, Elanhui.
Thank you for visiting Apple Support Communities.
I understand that you constantly receive a prompt to enter your Apple ID password after an update. After an update, you may be required to confirm the password for multiple services. I am unsure what service is requesting your password as this sounds like one is missing. However, the prompt should inform you what service needs this information. I would recommend entering your Apple ID password for all services that are labeled iPhone, iPad, and iPod touch in the article below.
What to do after you change your Apple ID email address or password
Cheers,
Jason H.

After ejecting SD card by pulling it to trash in iphoto, the wheel is spinning. How do I get it to stop? What happens if I force quit it?

Similar Messages

Maybe you are looking for