After encoding a sequence, music audio (Track 1) is fine, but speech audio (Track 2) is sped up and crackling.
Hello forumites,
So I've run into an odd problem I haven't experienced before. I exported my docu film last night. I have my music audio on A1 and speech audio on A2 in the timeline. When reviewing it, the music audio plays back fine, but the speech audio is playing back slightly fast (resulting in a bit of a chipmunk effect) and it's crackling (possibly because of the speed-up). The video appears to be in sync with this weird speed-up.
I'm using Windows 8.1 Pro and the latest version of Adobe Premiere Pro CC. Although this is happening on two different systems, here are my computer specs.
PC 1:
Custom built desktop
CPU: FX-8350 4 GHz
Motherboard: ASUS Sabertooth 990FX R.2
Memory: 16 GB DDR3
SSD: 256 GB Samsung 840 EVO (Primary)
HDD: 2 TB WD Red (Data)
GPU: 2x Radeon 6950 (CrossFireX mode)
PC 2:
ASUS G53S laptop
CPU: Core i7-2830QM 2 GHz
Memory: 6 GB DDR3
SSD: 120 GB Crucial M4 (Primary)
HDD: Seagate 500 GB (Data)
GPU: GeForce 460M
I did a bit of troubleshooting and thought that perhaps I nested sequences too many times. So, I did a few test renders from the ground up on each sequence where the nesting gets deeper. I got up to two nesting levels (where one sequence has a nested sequence which contains a nested sequence - Sequence-ception ) with all audio rendered normally.
However, the next nesting level resulted in the audio issue. So, I copied and pasted the timeline from the previous sequence to the current sequence, overwriting the nested timeline. Oddly enough, it still caused the problematic audio, which has me thinking that it's not related to nested sequences after all.
Keep in mind that playback inside Premiere works fine. I even created a new sequence from scratch into which to paste the timeline. Also, encoding using different codecs didn't make a difference. Of course, I also did the basic things and updated my video card drivers, restarted my computer, uninstalled/reinstalled Premiere Pro and Media Encoder, and tried encoding without GPU hardware acceleration.
Here are some 5-second DNxHD renders to get a grasp of what the results are.
Double Nested: https://www.dropbox.com/s/0xp50qbm48gjupd/Double%20Nested.mxf?dl=0 (Good audio)
Triple Nested: Dropbox - Triple Nested.mxf (Bad audio)
I should probably mention that I configured symbolic links to remap the Users folder to my data drive, as that has been known to cause some problems with Windows, but I made sure to link all the assets in my project using the actual file paths rather than the symlinks. Also, I've been rendering other projects prior to the previous patch with this setup and didn't experience any issues.
Has this happened to anybody else as well? I did some searching for this issue but I'm apparently the only one. I'm just hoping this is some weird bug introduced in the last patch.
That may be so, but why even have that feature if one can't even take full advantage of it? I'll be asking Adobe that if I don't get many suggestions or input here.
Thanks for responding, though!
Similar Messages
-
how can I get netflix streaming audio, the video is fine but the audio coming through is from the TV(dish)
It's exactly as I stated. Whenever I try to drag these kinds of loops (ESX24 / software instrument loops? the ones marked in green with the white music note next to them) from the loop browser into the timeline a message comes up saying Audio Not Found for that loop. And a new track is created automatically when loops are dragged into the timeline, so I'm not creating some other random / synth instrument track so I'm not sure what the deal is... But perhaps I'll try creating a software instrument track first and then drag the loop into that track and see what happens - maybe there's something with the default settings that automatically creates audio tracks whenever loops are imported?
-
How do you turn on audiio, video is fine but no audio. I'm using a macbook pro and 10.6.8
how do you turn on audiio, video is fine but no audio. I'm using a macbook pro and 10.6.8. this is on facetime.
D_avid wrote:
1. I ran software update and am up to date. Does this mean that my yet to be activated Boot Camp ap is also up to date?
There are 4 confusing pages of updates listed at Apples website for Boot Camp. I am having a hard time understanding what I need and don't need. For example, what version of Boot Camp do I have? I have Boot Camp Assistant version 3.0.4. Does this mean I have Boot Camp ver 3?
You have Mac OS X Snow Leopard, so you are going to use Boot Camp 3 on Windows. After installing Windows 7 on your MacBook, insert the Snow Leopard DVD and install the Boot Camp drivers from here. Then, as the Boot Camp drivers that your Snow Leopard disc contain are outdated, open Apple Software Update on Windows to install the most recent Boot Camp drivers.
D_avid wrote:
2. The printed Boot Camp instructions do not explain the process of using downloaded Windows drivers; the instuctions only refer to drivers on the original disks. I have the original install disks from around mid 2010 but I am sure many things have been updated by now. Wouldn't the best idea be to download and install? But the instructions only cover using the original disks. How do I use downloaded drivers?
On Snow Leopard, you can only download the Boot Camp drivers for the Late 2010 MacBook Air. On Lion and Mountain Lion, you have to download the Boot Camp drivers for all the computers. If you try to download the Boot Camp drivers on Snow Leopard with your computer, you will get a message telling that there aren't any drivers to download for your MacBook Pro -
I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?
My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option). -
I know it's a tad late, but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play any of my music. It will play Spotify and YouTube just fine, but it won't play my music. It will just skip to the next a d the next and the next after a second or two without any sound. Please help! Thank you.
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Video on Apple tv but no Audio, video on Apple tv but no Audio
video on Apple tv but no Audio, video on Apple tv but no Audio
Are you playing native content? Using Airplay? Mirroring?
-
After connecting Ooma phone service, my airport works fine, but it constantly blinks yellow. Should I be concerned?
You will get error messages in the airport utility..
Please go to the utility and click on the red circle on the airport. It should have a number in it.. which will be the number of issues you have.. eg double NAT.
If you previously had the Airport setup as main NAT in the network.. the ooma device just took over.. so you need to redo the setup of the airport to have a subsidiary role.
If you don't understand the issues list them for us.. but certainly adding the ooma is not going to go without effect. -
Music missing from iPhone 4s after update to IOS 8.3
Please, make sure you follow these instructions: Sync your iPhone, iPad, and iPod with iTunes using USB - Apple Support
Or, if you use Wi-FI to sync music, make sure you have it enabled on your phone and wait till all the music tracks are synced.
To set up syncing over Wi-Fi, follow these instructions: Sync your iPhone, iPad and iPod touch with iTunes using Wi-Fi - Apple Support -
I got my iPod on Monday, November 5th, so I've had it less then a week and I'm having so many issues with it. It would synce my music then when I tried again it synced the music, but it won't play so I tried to restore it and that made it worse. I had to take it to the apple store to fix it and now that it's restored I tried to sync it again and the same thing happened. It will sync the music but I can't play it. It's really frustrating, exspecially, because I just turned 17 and paid for this with my own, hard-earned money for a to-myself present!!
Based on what you tried, I would make an appointment at the Genius Bar of an Apple store and press for a replacement iPod. Elevate to the store manager if necessary.
-
Hii frnds,
here is the configuration in my router C1841..for the cisco ipsec remote access vpn..i was able to establish a vpn session properly...but there after i can only reach up to the inside interfaces of the router..but not to the lan devices...
Below is the out put from the router
r1#sh run
Building configuration...
Current configuration : 3488 bytes
! Last configuration change at 20:07:20 UTC Tue Apr 23 2013 by ramana
! NVRAM config last updated at 11:53:16 UTC Sun Apr 21 2013 by ramana
version 15.1
service config
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname r1
boot-start-marker
boot-end-marker
enable secret 5 $1$6RzF$L6.zOaswedwOESNpkY0Gb.
aaa new-model
aaa authentication login local-console local
aaa authentication login userauth local
aaa authorization network groupauth local
aaa session-id common
dot11 syslog
ip source-route
ip cef
ip domain name r1.com
multilink bundle-name authenticated
license udi pid CISCO1841 sn FHK145171DM
username ramana privilege 15 secret 5 $1$UE7J$u9nuCPGaAasL/k7CxtNMj.
username giet privilege 15 secret 5 $1$esE5$FD9vbBwTgHERdRSRod7oD.
redundancy
crypto isakmp policy 10
encr 3des
authentication pre-share
group 2
crypto isakmp client configuration group ra-vpn
key xxxxxx
domain r1.com
pool vpn-pool
acl 150
save-password
include-local-lan
max-users 10
crypto ipsec transform-set my-vpn esp-3des esp-md5-hmac
crypto dynamic-map RA 1
set transform-set my-vpn
reverse-route
crypto map ra-vpn client authentication list userauth
crypto map ra-vpn isakmp authorization list groupauth
crypto map ra-vpn client configuration address respond
crypto map ra-vpn 1 ipsec-isakmp dynamic RA
interface Loopback0
ip address 10.2.2.2 255.255.255.255
interface FastEthernet0/0
bandwidth 8000000
ip address 117.239.xx.xx 255.255.255.240
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
duplex auto
speed auto
crypto map ra-vpn
interface FastEthernet0/1
description $ES_LAN$
ip address 192.168.10.252 255.255.255.0 secondary
ip address 10.10.10.1 255.255.252.0 secondary
ip address 172.16.0.1 255.255.252.0 secondary
ip address 10.10.7.1 255.255.255.0
ip nat inside
ip virtual-reassembly
duplex auto
speed auto
ip local pool vpn-pool 172.18.1.1 172.18.1.100
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip dns server
ip nat pool INTERNETPOOL 117.239.xx.xx 117.239.xx.xx netmask 255.255.255.240
ip nat inside source list 100 pool INTERNETPOOL overload
ip route 0.0.0.0 0.0.0.0 117.239.xx.xx
access-list 100 permit ip 10.10.7.0 0.0.0.255 any
access-list 100 permit ip 10.10.10.0 0.0.1.255 any
access-list 100 permit ip 172.16.0.0 0.0.3.255 any
access-list 100 permit ip 192.168.10.0 0.0.0.255 any
access-list 150 permit ip 10.10.7.0 0.0.0.255 172.18.0.0 0.0.255.255
access-list 150 permit ip host 10.2.2.2 172.18.1.0 0.0.0.255
access-list 150 permit ip 192.168.10.0 0.0.0.255 172.18.1.0 0.0.0.255
control-plane
line con 0
login authentication local-console
line aux 0
line vty 0 4
login authentication local-console
transport input telnet ssh
scheduler allocate 20000 1000
end
r1>sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 117.239.xx.xx to network 0.0.0.0
S* 0.0.0.0/0 [1/0] via 117.239.xx.xx
10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks
C 10.2.2.2/32 is directly connected, Loopback0
C 10.10.7.0/24 is directly connected, FastEthernet0/1
L 10.10.7.1/32 is directly connected, FastEthernet0/1
C 10.10.8.0/22 is directly connected, FastEthernet0/1
L 10.10.10.1/32 is directly connected, FastEthernet0/1
117.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C 117.239.xx.xx/28 is directly connected, FastEthernet0/0
L 117.239.xx.xx/32 is directly connected, FastEthernet0/0
172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C 172.16.0.0/22 is directly connected, FastEthernet0/1
L 172.16.0.1/32 is directly connected, FastEthernet0/1
172.18.0.0/32 is subnetted, 1 subnets
S 172.18.1.39 [1/0] via 49.206.59.86, FastEthernet0/0
192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.10.0/24 is directly connected, FastEthernet0/1
L 192.168.10.252/32 is directly connected, FastEthernet0/1
r1#sh crypto isakmp sa
IPv4 Crypto ISAKMP SA
dst src state conn-id status
117.239.xx.xx 49.206.59.86 QM_IDLE 1043 ACTIVE
IPv6 Crypto ISAKMP SA
r1 #sh crypto ipsec sa
interface: FastEthernet0/0
Crypto map tag: giet-vpn, local addr 117.239.xx.xx
protected vrf: (none)
local ident (addr/mask/prot/port): (0.0.0.0/0.0.0.0/0/0)
remote ident (addr/mask/prot/port): (172.18.1.39/255.255.255.255/0/0)
current_peer 49.206.59.86 port 50083
PERMIT, flags={}
#pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
#pkts decaps: 2, #pkts decrypt: 2, #pkts verify: 2
#pkts compressed: 0, #pkts decompressed: 0
#pkts not compressed: 0, #pkts compr. failed: 0
#pkts not decompressed: 0, #pkts decompress failed: 0
#send errors 0, #recv errors 0
local crypto endpt.: 117.239.xx.xx, remote crypto endpt.: 49.206.xx.xx
path mtu 1500, ip mtu 1500, ip mtu idb FastEthernet0/0
current outbound spi: 0x550E70F9(1427009785)
PFS (Y/N): N, DH group: none
inbound esp sas:
spi: 0x5668C75(90606709)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2089, flow_id: FPGA:89, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550169/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
inbound ah sas:
inbound pcp sas:
outbound esp sas:
spi: 0x550E70F9(1427009785)
transform: esp-3des esp-md5-hmac ,
in use settings ={Tunnel UDP-Encaps, }
conn id: 2090, flow_id: FPGA:90, sibling_flags 80000046, crypto map: ra-vpn
sa timing: remaining key lifetime (k/sec): (4550170/3437)
IV size: 8 bytes
replay detection support: Y
Status: ACTIVE
outbound ah sas:
outbound pcp sas:hi Maximilian Schojohann..
First i would like to Thank you for showing interest in solving my issue...After some research i found that desabling the " IP CEF" will solve the issue...when i desable i was able to communicate success fully with the router lan..But when i desable " IP CEF " Router cpu processer goes to 99% and hangs...
In the output of " sh process cpu" it shows 65% of utilization from "IP INPUT"
so plz give me an alternate solution ....thanks in advance.... -
Mp4 iTunes ''video fine but NO Audio''
Hi, I just convert 1,500 DVDs (concerts, videos and Tv series) into Mp4 using Nero Recode with no problems, everything is perfect when I play, tag, etc. my Mp4 in iTunes, but now Im in the process to covert 300 DVDs movies into Mp4 but when I try to play this new Mp4 into iTunes I have no audio, if I play this Mp4 in Nero showtime, VLC, winamp, etc. I have audio but in iTunes/QuickTime I have no audio
Please help me, thanks in advance
AMDAthlon64x2DuaCore44002gbRAM*300gbSA2*SP2*NvidiaNX6600AsusA8N32SLIDeluxe Windows XP AMD Cool N Quiet driverOk I know whats the problem is:
The first 1,500 DVDs (this Mp4 have no problem) I convert at 2 chanel stereo 448kbps and the seconds 300 DVDs movies (with no audio) I convert in AC3 5.1 at 640kbps
I realize because I rip to my HD one of the movies with no audio and convert in 2 channel stereo and this one have audio
The problem is AC3 5.1... do you have any idea to solve this because I dont want to re-convert again the 300 Mp4 files
Do you think if I purchase QuickTime Pro can solve this problem?
If not, if I recode again I will loose audio and video quality?
Regards -
I was watching a video full screen on my macbook but when I turned on air play mirroring to my Apple TV, the audio went dead on the mac and there was no audio on the tv. Any ideas why? Turn off mirroring and the audio was fine on the Mac.
Well an alternative to using the AirPlay feature in the Youtube app, is to use the Youtube app in the Apple TV. Thats all I have to say! All built-in apps on the Apple TV have amazing playback!
Hope this helped! -
Audio line-in shows input, but no audio?
I got a MyFi xm2Go player that I plugged in to my MDD's audio line-in jack with a patch cable (3.5mm to 3.5mm). I can't seem to get it to play through my MDD.
Checked under the Sound preferences. Line In selected for input, and the levels fluctuate like its got the signal. Verified Line Out was still my one option. Played with all the volume sliders. Even plugged headphones into the jack on the base just to make sure it worked, and it does.
I can't get the audio to play through.
What am I missing?
Thanks in advance...I'm going to change this to "answered" because thanks to this conversation I have found a solution.
Versiontracker has a freeware program called LineIn that bridges this gap. It will let you select your audio in and out and with a click of a button labeled "Pass Thru" it plays any audio input through your audio output.
http://www.versiontracker.com/dyn/moreinfo/macosx/18987
Just like OS X should.
This might be beating a dead horse, but one of the most disappointing things about the migration to OS X was these missing bits of functionality that somehow got lost in translation. I have heard the defense that since OS X is a brand new operating system from the kernel on up it's not a question of having taken something away.
Rubbish.
At the risk of sounding obnoxious, from the end user's standpoint if I go from 9 to 10 I shouldn't be losing any functionality of 9 by going to 10. If 9 had pass through, it's Apple's obligation to build that functionality into 10. If 10 is brand new from the ground up, find a way to recreate that new functionality.
It's clearly possible. I found a third-party non-Apple developer that did it.
The reason I'm ranting is that I shouldn't have had to hunt for this answer or a third-party solution in the first place. This is an obvious need that Apple really should have handled for me. The "pass-through" button should have either been there, or not been necessary because line-in audio would automatically be passed through to the line-out selected.
/rant.
Thanks for the help, everyone. I really do mean that. I am now grooving to satellite radio through my Mac thanks to you folks. -
Audio Line-In apparently working, but no audio out
Hi, A similar problem to the below post of "external mike not working", but, well, different.
I'm attempting to start recording some of my old vinyl. I've run a stereo mini-plug into the audio line-in from my stereo amplifier. I've selected the audio line-in on the sound preferences, and I see the signal input levels respond accordingly. BUT, I get no sound output either on internal, or external speakers (through the headphone port)
The signal is from the turntable (or whatever source I choose) through the amplifier Tape 2 REC line to the computer input port, so it is adequately boosted (as evidenced by the signal levels)
Is this normal? What am I doing wrong? AM I missing an additional setting somewhere?
Thanks.
G4 Mac OS X (10.4.10) 1.25MHz Powerbook
G4 Powerbook Mac OS X (10.4.10) 1.25 MHzHere's the explanation. The audio line input is not connected to the audio output - this i as it should be.
What program are you going to use to record? Whichever program you use should have a setting for where to send the monitor output. In other words, it's the program's responsibility to take the input and send it somewhere for monitoring.
Try fiddling with Garage Band to see how this works. -
This just started after Maverick update installed Dec 20.frustrated and annoyed that apple would release an update that makes apple users lifes such a misery . Anyone else suffering same problems. I can switch bluetooth off that makes using multiple screens difficult which is why I bought this $ 2800 top spec Mac retina 15 inch pro in the first place. I'm using Logitech MX5500 keyboard. Logitech MX1000 mouse works fine
Any suggestions or solutions much appreciated and hopefully apple gets their act together..I am having this same issue - where I work, we use bluetooth trackpads. If my boss tries to connect his wireless bluetooth keyboard to his computer, I get the request on my machine every single time. The "Bluetooth Troubleshooting" article does not address any part of blocking requests, bluetooth security settings, or anything related to this issue at all, really. I do not believe there is currently any fix or setting that CAN resolve either of our problems, but I'm hoping that posting this at least puts the issue out there for hopefully somebody who can address this issue to see.
Maybe you are looking for
-
Problem In F110 with status message " Payment run has been released "
Dear Friends, We have an Strange issue in payment program... While executing the payment program they got below Status Messages Parameters have been entered Payment proposal has been created Payment proposal has been edited *Payment run has been rele
-
Trying to understand DBAs from a Developer's view
Hello OTN, I am working on some bit of code that will change the content of rows in tables. If you DBAs have to run a regular check on the performance of the databases that you are in charge of, what would you like to see if something like this code
-
Hello, i've got problem. I need to made a sales raport. One of the column is price in currency- EURO. But i've got data in US dolars. I need to do a prompt on a dashbord when user can write value EURO for Dolar. The value should be taken to the rapor
-
How to tracke the new entries in database table ?
Hi, How to tracke the new entries in database table ? is there any FM or report is there to check it ? regards vishnu
-
Mac mini good for photoshop, lightroom and large files?
Hello all, My brother finally wants to switch from windows to mac and asked me for advice. He is a young photography professional so his primary need is to run photoshop, lightroom and be able to use large RAW files and 100+ MB photoshop files. He st