After entering Time Machine-takes a long time to load. Thoughts?
I've just installed Yosemite, and backed up to my Time Capsule over wifi. I can enter Time Machine easily enough, but when I go to choose a date earlier than 'NOW," it says "waiting." Eventually, it loads. But it can take up to 15-20 minutes. I didn't have this problem before upgrading to Yosemite. Thoughts? Thanks much.
It took me 20 hours to backup 32GB out of 65. I don't know why. Using carbon copy clone to download to another backup drive I did it perfectly in about 30 minutes. I expect that those appllications which show applicatiions are at fault and will try later getting rid of apps such as F-10 and pathfinderfor the first download. I have no idea why this is so slow. Everything is so slow.
Similar Messages
-
Time machine takes very long time
Time machine takes very long time to write the back up.
For writing 2,33 GB (from 26,33GB) it takes abou14 hours and I don't know, why it is so very slow. I work with USB 3.0 2 TB external hard disk drive.Try Here > http://pondini.org/TM/D2.html
From Here > http://pondini.org/TM/Troubleshooting.html -
Time Machine takes very long time to back up with new large drive
I started using Time Machine on my 17" MBP about a month ago. I was using a 250 GB Samsung drive. When I discovered that TM will back up other external drives (I have several firewire pocket drives), I purchased a 500 GB Cavalry drive with USB 2.0 and eSATA connections. The first backup of my MBP drive (about 85 GB) took several hours (4-6?). I backed up one of my pocket drives (about 60 GB), which took 3-4 hours. Then, when I changed the back-up drive in Time Machine to the new 500 GB drive with the eSATA connection, I stopped it after an hour, because only 2 GB had been backed up. I erased the drive and restarted using the USB connection. It backed up 3 GB in an hour. So, now I'm back to using the original back-up drive. I've performed benchmark tests on all drives (the Samsung 250, Cavalry USB and eSATA 500 GB, and the MBP internal drive) with Xbench. The USB speeds on the Samsung and Cavalry drives came out about the same with a slight edge to the Cavalry drive. The eSATA connection with the Cavalry drive operated at over twice the speed of the USB connections and at about twice the speed of the MBP internal drive (which is a 1.5 Gb/s SATA drive). Basically, I can't figure out why Time Machine takes so incredibly long to back up when I switched to the new drive. Any ideas?
JeffIt took me 20 hours to backup 32GB out of 65. I don't know why. Using carbon copy clone to download to another backup drive I did it perfectly in about 30 minutes. I expect that those appllications which show applicatiions are at fault and will try later getting rid of apps such as F-10 and pathfinderfor the first download. I have no idea why this is so slow. Everything is so slow.
-
After entering password it takes up to two minutes that screen opens
Hi
after entering my user password it takes up to two minutes that the screen opens.
Help whats wrong?
AndreasPerhaps a login items issue.
Open System Preferences - Accounts then select the Login Items tab.
Delete all items by clicking then click -
If there's nothing listed there, go to /Library/Startup Items. Move any files in the Startup Items folder to the Trash.
Restart your Mac. -
Why do apps take so long to down load on an iPad air?
Why do apps take so long to down ipad on an iPad air? Talking 24 hours!
1. It depends on the speed of your internet.
2. How much data in the app. -
After I turn on my macbook, it takes a much longer time to turn on. I can move around the arrow, but nothing works. I tried to click every app, no response. I have to wait a long time and then everything works. Did I do something wrong?
ThanksStart Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
Time machine takes very long time and does not finish the backup
Hi,
Time machine is unable to backup my 2014 Mackbook Air 128 GB Drive anymore.
I have tried numerously to initiate a backup but it could only backup a very small volume, less than 1KB, then stall for hours without any progress.
I tries to repair my volume, using the Disk Utility, but it still does not backup, except for the 1K progress.
I have noticed that "Spot Light" indexing is also taking forever. It has been indexing for days without any pogress.
What is going on.
What should I do to fix it.
My latest successful backup was on Jul 25.
Please help.
Thanks.
TareqThese instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
Patch R12 on T4 engine takes a long time
Hi All,
I have patched R12 64bit (patch 8919491) on T4-1 machine takes a long time (not completed after 40 hours).
ram 16, sga 2g, another init.ora I set default, idle cpu concumption 99%
message alert.log : Incremental checkpoint up to RBA [0x3.1afee1.0], current log tail at RBA [0x3.1aff77.0]
please helpHi Husein,
Thank you for your help.
I run adpatch as instruction on Readme.txt 8919491.
here are status 16 of workers:
96 -rw-r--r-- 1 oradev dba 48423 May 9 07:06 adwork004.log
134 -rw-r--r-- 1 oradev dba 67870 May 9 07:04 adwork007.log
148 -rw-r--r-- 1 oradev dba 74786 May 9 07:04 adwork005.log
124 -rw-r--r-- 1 oradev dba 63411 May 9 07:04 adwork008.log
54 -rw-r--r-- 1 oradev dba 27221 May 8 21:00 adwork002.log
162 -rw-r--r-- 1 oradev dba 82239 May 8 21:00 adwork003.log
224 -rw-r--r-- 1 oradev dba 102927 May 8 21:00 adwork001.log
16 -rw-r--r-- 1 oradev dba 7809 May 8 21:00 adwork012.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork014.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork013.log
20 -rw-r--r-- 1 oradev dba 9746 May 8 21:00 adwork011.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork015.log
20 -rw-r--r-- 1 oradev dba 10140 May 8 21:00 adwork010.log
68 -rw-r--r-- 1 oradev dba 34358 May 8 21:00 adwork006.log
22 -rw-r--r-- 1 oradev dba 10493 May 8 21:00 adwork009.log
14 -rw-r--r-- 1 oradev dba 7037 May 8 21:00 adwork016.log
I'll send you 2 workers status are adwork004.log and adwork016.log:
1. adwork004.log :
The Index in xdf-file and db match perfectly. No alteration necessary.
Index WF_USER_ROLE_ASSIGNMENTS_N3 exists under APPLSYS schema.
Checking for differences
Column_name and Uniqueness match for both file and DB Indexes
The Index in xdf-file and db match perfectly. No alteration necessary.
Index WF_USER_ROLE_ASSIGNMENTS_N4 does not exist in APPLSYS.
Skipping the creation of index WF_USER_ROLE_ASSIGNMENTS_N4 in current mode.
Index WF_USER_ROLE_ASSIGNMENTS_U1 exists under APPLSYS schema.
Checking for differences
Column_name and Uniqueness match for both file and DB Indexes
The Index in xdf-file and db match perfectly. No alteration necessary.
Performing AOL meta data updates
Attempting to update fnd tablespace meta data
Upload of Fnd_Object_Tablespaces is successful
AOL metadata updated successfully.
==========================================================
Done calling the utility function. Return Code = [0] TimeStamp = [Wed May 08 21:01:01 WIT 2013]
Updating task with status 0
Time when worker completed job: Wed May 08 2013 21:01:01
AdjavaWorker has reached the maximum wait timeout specified( 36000000 ). So Exiting.
2. adwork016.log :
Reading language and territory information from file...
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/oracle/oradev/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/oracle/oradev/apps/apps_st/comn/java/lib/appsborg.zip:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java:/u01/oracle/oradev/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/oracle/oradev/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/oracle/oradev/apps/apps_st/comn/java/classes"
Calling /u01/oracle/oradev/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
Exception in thread "main" java.sql.SQLException: The Network Adapter could not establish the connection
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:412)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:531)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:221)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:503)
at java.sql.DriverManager.getConnection(DriverManager.java:582)
at java.sql.DriverManager.getConnection(DriverManager.java:185)
at oracle.apps.ad.worker.AdJavaWorker.getAppsConnection(AdJavaWorker.java:1041)
at oracle.apps.ad.worker.AdJavaWorker.main(AdJavaWorker.java:276)
Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection
at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:359)
at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422)
at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:672)
at oracle.net.ns.NSProtocol.connect(NSProtocol.java:237)
It's mean my machine is not enought for 16 workers ?
please help -
Upgraded to Mavericks, Enter Time Machine and cannot see any previous backup at all
MBP, upgrade from 10.6.8 to Mavericks.
After "Enter Time Machine", the time line on the right side of the screen does not show any previous backup at all.
In Finder, I can see the backup folder and the inside contents.
In Time Machine Preference, I did select the disk for backup again.
Any idea ? Thank you.Thank you for your reply and the links.
I did this:
1) I have two ext. USB drives for the MBP time machine backup, did not occur to me to try the other one which is the very first disk, let's call it disk 1, I used for backup, the other one I started using after a year or so.
2) reboot with the disk 1 connected
3) do a "Backup Now", and I forgot the exact dialogs and what they say.
4) something like, "choose a disk for the backup", I chose disk 1
5) it knows I had two disk for backup and ask me if I want to use two disk for backup, click yes
6) the time machine pref. says something like initial backup (after new system installed?)
7) after it done, I can see the previous time machine back up and the time line goes back to where it was before.
8) connect the disk 2 and "Backup Now", it just went to backup right away, after it's done, I can see the prev. backups and the time line too.
Thanks again for your help. -
Attachments take soooo long to download?
Hi,
I have a decent adsl line (2mb), but the attachments to mails take so long to download, loads slower than normal - is there anything I can do.
eg an attachment of 2MB takes like 15-20 mins..????
I noticed this on my mac mini, then on my intel imac
any ideas?
Gwyn
xxxxxxxxxSince the problem occurred with two different machines it is probably not a disk space issue, although if your mail files are already very big that could be a problem. Report what Get Info gives you on the folder ~/Library/Mail. Also, try downloading a large file without going through mail and time it - your line may not be giving you what you think, or your ISP may have too many customers on the one link. You can try this one if you like, it is 155MB, so on your 2Mb line it should take about 15mins.
AK -
Problem description:
Computer takes a long time to fire up. Spinning ball is seen during start up, sometimes when login dialog box, and sometimes after entering login password. My mac freeze often, especially when using Lightroom…. Help is much appreciated!
EtreCheck version: 2.0.11 (98)
Report generated 3. november 2014 kl. 01.23.41 CET
Hardware Information: ℹ️
MacBook Pro (13-inch, Mid 2010) (Verified)
MacBook Pro - model: MacBookPro7,1
1 2.4 GHz Intel Core 2 Duo CPU: 2-core
4 GB RAM Upgradeable
BANK 0/DIMM0
2 GB DDR3 1067 MHz ok
BANK 1/DIMM0
2 GB DDR3 1067 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
NVIDIA GeForce 320M - VRAM: 256 MB
Color LCD 1280 x 800
System Software: ℹ️
OS X 10.10 (14A389) - Uptime: 2:49:19
Disk Information: ℹ️
Samsung SSD 840 EVO 500GB disk0 : (500,11 GB)
S.M.A.R.T. Status: Verified
EFI (disk0s1) <not mounted> : 210 MB
Macintosh HD (disk0s2) / [Startup]: 499.25 GB (260.35 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
MATSHITADVD-R UJ-898
USB Information: ℹ️
Apple Inc. Built-in iSight
Apple Internal Memory Card Reader
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Computer, Inc. IR Receiver
Apple Inc. Apple Internal Keyboard / Trackpad
Configuration files: ℹ️
/etc/sysctl.conf - Exists
/etc/hosts - Count: 15
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/IPVanish.app
[not loaded] foo.tap (1.0) Support
[not loaded] foo.tun (1.0) Support
/Applications/LaCie Desktop Manager.app
[not loaded] com.LaCie.ScsiType00 (1.2.13 - SDK 10.5) Support
[not loaded] com.jmicron.driver.jmPeripheralDevice (2.0.4) Support
[not loaded] com.lacie.driver.LaCie_RemoteComms (1.0.1 - SDK 10.5) Support
[not loaded] com.oxsemi.driver.OxsemiDeviceType00 (1.28.13 - SDK 10.5) Support
/Applications/Private Eye.app
[loaded] com.radiosilenceapp.nke.PrivateEye (1 - SDK 10.7) Support
/Library/Application Support/HASP/kexts
[not loaded] com.aladdin.kext.aksfridge (1.0.2) Support
/System/Library/Extensions
[loaded] com.hzsystems.terminus.driver (4) Support
[not loaded] com.nvidia.CUDA (1.1.0) Support
[not loaded] com.roxio.BluRaySupport (1.1.6) Support
[not loaded] com.sony.filesystem.prodisc_fs (2.3.0) Support
[not loaded] com.sony.protocol.prodisc (2.3.0) Support
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) Support
Startup Items: ℹ️
CUDA: Path: /System/Library/StartupItems/CUDA
ProTec6b: Path: /Library/StartupItems/ProTec6b
Startup items are obsolete and will not work in future versions of OS X
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[running] com.adobe.AdobeCreativeCloud.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.digitalrebellion.EditmoteListener.plist Support
[loaded] com.google.keystone.agent.plist Support
[loaded] com.intego.backupassistant.agent.plist Support
[running] com.mcafee.menulet.plist Support
[invalid?] com.mcafee.reporter.plist Support
[loaded] com.nvidia.CUDASoftwareUpdate.plist Support
[loaded] com.oracle.java.Java-Updater.plist Support
[running] com.orbicule.WitnessUserAgent.plist Support
[loaded] com.xrite.device.softwareupdate.plist Support
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist Support
[invalid?] com.adobe.SwitchBoard.plist Support
[running] com.aladdin.aksusbd.plist Support
[failed] com.aladdin.hasplmd.plist Support
[running] com.edb.launchd.postgresql-8.4.plist Support
[loaded] com.google.keystone.daemon.plist Support
[running] com.intego.BackupAssistant.daemon.plist Support
[loaded] com.ipvanish.helper.openvpn.plist Support
[loaded] com.ipvanish.helper.pppd.plist Support
[invalid?] com.mcafee.ssm.ScanFactory.plist Support
[invalid?] com.mcafee.ssm.ScanManager.plist Support
[running] com.mcafee.virusscan.fmpd.plist Support
[loaded] com.mvnordic.mvlicensehelper.offline.plist Support
[loaded] com.oracle.java.Helper-Tool.plist Support
[loaded] com.oracle.java.JavaUpdateHelper.plist Support
[running] com.orbicule.witnessd.plist Support
[loaded] com.radiosilenceapp.nke.PrivateEye.plist Support
[running] com.xrite.device.xrdd.plist Support
User Launch Agents: ℹ️
[loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.ARM.[...].plist Support
[invalid?] com.digitalrebellion.SoftwareUpdateAutoCheck.plist Support
[loaded] com.facebook.videochat.[redacted].plist Support
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
[running] com.spotify.webhelper.plist Support
User Login Items: ℹ️
Skype Program (/Applications/Skype.app)
GetBackupAgent Program (/Users/[redacted]/Library/Application Support/BeLight Software/Get Backup 2/GetBackupAgent.app)
PhoneViewHelper Program (/Users/[redacted]/Library/Application Support/PhoneView/PhoneViewHelper.app)
EarthDesk Core UNKNOWN (missing value)
Dropbox Program (/Applications/Dropbox.app)
AdobeResourceSynchronizer ProgramHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
i1ProfilerTray Program (/Applications/i1Profiler/i1ProfilerTray.app)
Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.0 Support
Default Browser: Version: 600 - SDK 10.10
AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0
SiteAdvisor: Version: 2.0 - SDK 10.1 Support
AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
JavaAppletPlugin: Version: Java 7 Update 71 Check version
User Internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 6.2 Support
F5 Inspection Host Plugin: Version: 6031.2010.0122.1 Support
f5 sam inspection host plugin: Version: 7000.2010.0602.1 Support
Safari Extensions: ℹ️
Facebook Cleaner
Better Facebook
SiteAdvisor
Incognito
Bing Highlights
YouTube5
AdBlock
YoutubeWide
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
CUDA Preferences Support
EarthDesk Support
Editmote Support
Flash Player Support
FUSE for OS X (OSXFUSE) Support
Growl Support
Java Support
Witness Support
Time Machine: ℹ️
Time Machine not configured!
Top Processes by CPU: ℹ️
13% taskgated
12% WindowServer
1% WitnessUserAgent
1% sysmond
1% Activity Monitor
Top Processes by Memory: ℹ️
327 MB com.apple.WebKit.WebContent
137 MB softwareupdated
94 MB Safari
82 MB VShieldScanner
82 MB Dock
Virtual Memory Information: ℹ️
65 MB Free RAM
1.58 GB Active RAM
1.54 GB Inactive RAM
647 MB Wired RAM
2.95 GB Page-ins
260 MB Page-outsYou have SCADS of extensions and the things running. McAfee, Intego, Orbicule, CleanMyMac, and others I've not ever even heard of. My first recommendation would be to remove all of these and see if things improve.
-
Entering Time Machine - slow after update to Snow Leopard
Entering Time Machine via the icon in my top menu bar has never been fast. However, last week I moved from Leopard to Snow Leopard (since fully updated). Tonight I needed to restore a file from yesterday's backup, so I selected "Enter Time Machine." The "universe" with the timeline along the right loaded, but several minutes passed and I was still not able to use the arrows at the lower right to move backwards in time. Nor would the timeline at the right show any date markers other than "Now," "Today," and "January 2010" and "January 2009." I let it sit for several minutes with no apparent progress. Even the "cancel" button took nearly 60 seconds to function.
As an alternative, I tried running the Time Machine application from my apps folder. It was slower to bring up the "universe" but did, after a couple of minutes, get me to a window with a functional timeline.
Any idea what the problem might be? I feel like entry into my Time Capsule has gotten slower and slower, but tonight was really egregious.It does take a while over a network; there's a lot of "setup" that seems to be required.
You might try the things in #E4 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum). -
Email messages take a long time to enter on my home PC (this is the pc I use for appr. 4-5 years now to read Thunderbird email.
On other thunderbird installed machines I don't have this problem, the mail enters quickly. Also when I connect at home (Wifi) with my laptop the email comes in quickly. So it is the thunderbird I am usiong on my desktop that has the problem.''Matt [[#answer-670744|said]]''
<blockquote>
Thunderbird or your anti virus or your network card.
My money would be on the anti virus. What do you use?
</blockquote>
I am using Norton on laptop as well as desktop PC.
Desktop is 4-5 years old, might be the network card by now. Can I check ? -
Lenovo Services/P​rogram takes a long time to start after bootup
It seems like Lenovo services take a long time to start after boot up is completely done.
My Bootup time is less than a minute (0:51s), but my lenovo services (Power Manager Gauage, Lenovo Services in the Sidebar, have th ThinkVanatage Button work, and most annoying of all is having access to my network card to change networks) takes about 2 minutes.
Is there a reason why this is taking so long?
I've uninstalled and installed the lastest Lenovo Interface Driver, and a lot of ThinkVantage/Lenovo software and drivers.
Any ideas?No response?
Anyone else on T400 notice this? -
my mac air died, after i reinstall from dvd drive, when i boot up again, i saw a prohibit sign showing up on the screen, then get to my logon screen. After logon, it takes very long time to load any application. pls help
OK. If you believe that.
When the disk is starting to die it can be bad for a moment and then be good for a while. If there was no problem while you were checking it of course it shows up good.
I tell you those are the signs of a disk that is about to die.
Allan
Maybe you are looking for
-
FM Radio - Only Mono Reception
I just picked up a Zen Micro. When turning on the radio - I only got reception in Mono. Any ideas anyone? I li've in Chicago which has very big radio stations so I dont think that is the issue. thanks.
-
Production Manager (Service)-FLU000433 OPCO Description Fluke Corporation is the world leader in the manufacture, distribution and service of electronic test tools and software. We are a dynamic market leader with sound financial health. Fluke has a
-
Need some help in fixed WLAN in my N81
Hi All, I have an N81. When i connect to WLAN, it is getting configured. But when I try to access the internet through that WLAN accesspoint, i get an error message "Connection not available" i am sure the WLAN is working fine, as WLAN is from my ro
-
Please Help Me With My Yahoo App Problem
Please Help Me With My Yahoo App Problem, Everytime I Want To Log In To Yahoo With Yahoo Application This Messege Appears, Please Help Me With this
-
This is the error I'm getting.... I've pasted my password which is the same for incoming & outgoing.