After every call...

Did anyone notice that after every call ended and when you unlock the phone, it brings up the recent call list automatically instead of the home screen? Am i crazy?
Message was edited by: actuarius

I am VERY sure now of my problem. After EVERY incoming call, iPhone brings up the Phone menu upon unlocking. It's very annoying and I dont know how to solve this. Doesnt anyone else have this problem?

Similar Messages

IPhone 3G freezes after every call after 4.2 update

There isn't much more to say other than that. As soon as I installed the 4.2 update my phone now freezes after every call. It stays frozen for hours, right now it's been frozen over 12 hours (screen is even still lit up). I'm tired of completely restoring my phone after every phone call!!!

its nt a casual evente in many iphone 3G with OS 4.2
really apple is the responsable.
we are honest users, and we need a real answer.
No reset the phone many tiemes, or change the phone.
The problem is sorftware and internal politics in apple.
no more dirty play ...
other companies lets that a user continue with her device, by 5 or more years.
an spencive device need to be by more time.
why apple continue selling Iphone 3G? ...

Phone crashes after every call

My Droid crashes after every call. I have to remove the battery and reboot the phone. (Am running Droid 2.1).
Verizon - this isn't even funny any more. What's up with this?

I haven't seen this before and it sounds really strange.
Have you tried restoring you phone to "factory defaults". It is quite possible something that you have installed is conflicting somewhere, but it's really hard to guess what it might be.
Also, while some of the VZW technical people do hang out here and answer questions, you're probably better off contacting VZW Customer Service with this one. You can reach them by dialing 611 on your mobile (which, in this case I wouldn't recommend) or at (800) 922-0204.
jason

Nokia E6 - Signal Drop after every call

Hi,
I have started to face this problem for the last 8-10 days.
After every call is completed there is a signal drop for about 30-40 seconds. It drops to zero & then comes back to full strength again.
I have updated the phone software to the latest version and still have the same problem.
There is no problem if I use my sim card in any other phone.
Thanks for your solutions in advance.
Cheers
KD
Solved!
Go to Solution.

Hey,
Thanks a ton...working for me so far for the last 3 calls...
If only you had replied earlier ...it would have saved me from going to the Nokia Service Center, who told me to change my SIM card...which I did as well with no solution. LOL
I wonder where the nokia moderators are ..not even one reply for almost 3 days now..
anyways ..thanks a ton buddy
Cheers
KD

Why my iPhone 5 freeze for around 10-15 seconds before I can continue using it again after every calls?, Why my iPhone 5 freeze for around 10-15 seconds before I can continue using it again after every calls?

It's annoying as every time I want to make urgent calls need to wait for a long time before I can use it again

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Iphone G3 screen goes black after ending every call.

My iphone screen goes black after ending a call. Shouldn't I have to hit the "end call" button? I'm having to re-boot the phone after every call I make. Anyone else have similar issues?

Nathan C.,
I know that and it is not the problem nor an explanation.
Here is the issue I am referring to:
When someone calls, still during the conversation when I remove the phone from my ear (in order to access the key pad, for example), or in order to hand up, the screen goes black and the phone freezes.
In other words I cannot terminate the call or access the keys,as I remove the phone away from my ear it shuts down.
Any help???

Skype keeps crashingafter every call

windows 8.1 pro, skype 7.6.0.105. skype crashes and turns off after every call made incoming or outgoing.have uninstalled using normal and revo uninstaller,cc cleaner for registry, reinstalled three times still same issue even tried with older versions.event veiwer reads as follows:Log Name: Application
Source: Application Error
Date: 20/07/2015 22:30:42
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: [Removed for privacy]-pc
Description:
Faulting application name: Skype.exe, version: 7.6.0.105, time stamp: 0x559165ab
Faulting module name: ksproxy.ax, version: 6.3.9600.17415, time stamp: 0x5450468f
Exception code: 0xc0000005
Fault offset: 0x00007043
Faulting process ID: 0x187c
Faulting application start time: 0x01d0c1b037385020
Faulting application path: C:\Program Files\Skype\Phone\Skype.exe
Faulting module path: C:\Windows\System32\ksproxy.ax
Report ID: 929024ea-2f26-11e5-afbc-0019666e7d2d
Faulting package full name:
Faulting package-relative application ID:
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-07-20T21:30:42.000000000Z" />
<EventRecordID>7662</EventRecordID>
<Channel>Application</Channel>
<Computer>[Removed for privacy]-pc</Computer>
<Security />
</System>
<EventData>
<Data>Skype.exe</Data>
<Data>7.6.0.105</Data>
<Data>559165ab</Data>
<Data>ksproxy.ax</Data>
<Data>6.3.9600.17415</Data>
<Data>5450468f</Data>
<Data>c0000005</Data>
<Data>00007043</Data>
<Data>187c</Data>
<Data>01d0c1b037385020</Data>
<Data>C:\Program Files\Skype\Phone\Skype.exe</Data>
<Data>C:\Windows\System32\ksproxy.ax</Data>
<Data>929024ea-2f26-11e5-afbc-0019666e7d2d</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event> please can you put any light on this?

ruwim wrote:
Try to uninstall Geovision GV-800 device.unistalled gv800 cctv system and teamviewer 10 still crashing after evry call, but before updates gv800 and temvewer been on here over 6 months and skype was working correctly,think only thing to do now is reload whole system,thats a weeks work unless u think of something else?

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off.

Question about the sensor... just got my 4s yesterday after screwing up my 3 with the laterd version update. EVery call I have been on has either changed to speaker, called another number or ended the call or activated facetime, which I have turned off. never had this trouble with my 3...I don't even want to talk to anyone on this phone! Is the sensor bad? That is what the AT&t rep suggested.

Restore as new... if the problem still continues then there is a hardware issue.
If it stops after a restore as new, then the issue is with the backup the device is currently setup with.

Calling Delta Merge in DS after every commit

Hi Folks,
I am using an Delta extraction logic in DS to extract large table from ECC (50 Million rows) to the HANA database. The commits in DS job have been configured fopr every 10,000 records. Three questions
1) Should I disable the delta merge in HANA database for this target table prior to the initial load of table. Once the initial load is complete, manually perform the delta merge in HANA is the right approach or
2) Should I be calling manually performing Delta merge in DS job to make sure the table is merged after every commit? If yes how do I call the Delta merge command in DS jobs and how can I do it per commit?
3) Can I invoke Delta merge in DS as part of Delta extraction logic after the initial load is completed in DS?
Any advise will definately be appreciated.
Thanks,
-Hari

Hi Jim
if your big table requires a merge, AUTOMERGE will pick it up. The mergedog process checks it every 60 seconds, so that should be alright for your requiremen.
If the table doesn't need to be merged, it won't.
Manually handling the delta merge is a fine-tuning action that is most often not required or recommendable.
- Lars

Call TableCellRenderer after every setValueAt().

I've made a TableCellRenderer which colours some cells depending on some values. My only problem is, that it only colours the cells after a addRow() or similar and not after every setValueAt().
I want my table to colour the cells after every change in the table.
How is this possible?

Since I don't know how you have implemented your Table Model I can't be sure of the detail but if you have extended DefaultTableModel or AbstractTableModel then in method setvalueAt() you call fireTableCellUpdated() with whatever row and col you are updating. Something like
public void setValueAt(int row, int col)
// do your stuff to update the value
fireTableCellUpdated(row, col);)
}

Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update

Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... What should i do. I have now resulted in using another phone as i cannot operate like this...

Hi i am also having problems with a crackling speaker on calls every few calls. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... I will watch to see what advice you get.

After every phone call I have to reboot

After any call I make, the screen shows "App Error" then I have to shut the phone down and reboot. (In Polk county, there is no service center that has offered to help or has been available to help. Very dissatisfied with service) HELP!!
Solved!
Go to Solution.

Here is a KB that discusses that error:
KB30100 "JVM 200" appears on the BlackBerry smartphone
Hopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I am trying to generate an array of 30 random numbers. after every 5 readings a new vi should open and tell the user that 5 readings has been completed. and again carry on with the generation of array.

since i do not have a transducer now, i am currently generating an array of 30 random numbers. after every 5 readings a warning should be given to the user that 5 readngs are complete. this cycle should repeat. the array size is 30.
please help me out, waiting for reply asap.
once i have the transducer, i will be taking 30 analog samples and then after every 5 smaples that wraning will be displaye din a new VI
Solved!
Go to Solution.

Use a while loop with a time delay representing your sampling period.
Use the count terminal to check if equals 4, so 4th iteration=5th sample.
Use a case structure. The true case will only be executed on the 4th iteration.
In the true case place a subVI with your desired message in the front panel. Go to the VI properties window and set "open front panel when called".
The closing condition of the warnign is not giving in your description.
Consider that rather than usign a subvi for this, you could use the "One/Two/Three button dialog" or "display message" vis at the "dialog and user interface" pallete.
Please give it a try and send your own VI. Do not expect us to provide a working solution.
Regards,

Firefox become not responsive after every 10 minutes for few seconds, and it back again.

Firefox 4 become not responding after every few minutes ( mainly 10 minutes). And it came back to its normal state within 10-15 seconds. I reinstall windows and Firefox, but same problem occur. On using chrome 11 and IE 9 I have no problem. I also check that there is no problem on using Firefox 3.
I mainly use Firefox for my web browsing, but due to Firefox 4 I totally disappointed. What should I do for now?

You have an add-on installed called Internet Download Manager. It's on Mozilla's Add-on Blocklist @ https://www.mozilla.com/en-US/blocklist/ at the foot of the page.
Uninstall it by clicking the orange Firefox button, go to Add-ons and then remove it in the Extensions menu.
If the problem persists, try running Firefox in [[Safe Mode]]. If it functions properly in that configuration, then one of your other add-ons is the culprit.

ResultSet "hangs" after every 10 records

Hi
Please could you somebody help me.
I have extracted a ResultSet from a database which contains between 100 and 200 records (5 field each).
If I call rset.next(), printing a count after each call my program hangs for about 2 minutes after every 10 records.
For example:
int count = 0;
while(rset.next()) {
System.out.println("" + ++count);
Prints:
1
2
3
4
5
6
7
8
9
10
Waits here for two minutes and then carries on
11
20
Waits again for 2 minutes etc.
Has anyone had this problem or does anyone know how to fix it?
FYI: prstat reports tiny CPU and memory usage so the hardware is not responsible.
Thanks a lot in advance

Hi All
It must be network - setFetchSize is unsupported in both Statement and ResultSet in the driver set I am using.
It is running through a 10baseT switch at the moment which may be the problem so I will stick it on the backbone and try again.
Thanks again for your help.

After every call...

Similar Messages

Maybe you are looking for