After Excise MIRO transec,in MIGO Basic custm & Add.custm not captured
HI GURUS,
In the import process after doing Excise MIRO transection,i am doing MIGO but in this onely Basic coustom duty(JCV1) & Add.coustom duty(JADC) etc are not geting captured by default,But Ecess (JECV) & HCess (J1CV) values are captured by default from the system. So we need your help which is highly appreciated.
Best Regards
V.raj
Hi
last check
open PO in ME23N select your condition and click on details and check following point is there or not
Condition class A Discount or surcharge
statical
Calculat.type A Percentage
accrual
Condit.category B Delivery costs
Manual tick
Cond.control C Changed manually
Condit.origin A Automatic pricing
let em know it look like exact there
Regards
Kailas Ugale
Edited by: kailasugale on Dec 8, 2011 4:03 PM
Edited by: kailasugale on Dec 8, 2011 4:04 PM
Similar Messages
-
Same Vendor Excise Invoice No in MIGO/Part 1 Entry is not allowed
Dear All,
We have uploaded service tax patch in the beginning of Jan ' 2011.
While doing migo entry for GR, vendor excise invoice no is entered. If same invoice of vendor is repeated for different year, system is not accecpting it. It is giving error message that all items in the excise invoice has been received.
Whereas it was allowing to do so before Jan ' 2011.
We have uploaded service tax patch in the beginning of Jan ' 2011. It appears that after this patch uploading system is not allowing.
It seems system is checking only vendor exicse invice no and not the date due to which it gives the errror message.
Can any one suggest as to what is to be done?
Regards
RatnaDear Rajesh,
Refer excise invoice is used; If you have already entered the vendor's excise invoice that is already captured excise invoice in J1iex before posting goods receipt. In that case you have to select Only Refer Excise Invoice or Refer and Post Excise Invoice. Then enter the official excise invoice number.
If you do not want part 1 and 2 to be generated i think it will be better to select no excise entry and you can update excise invoice number in any of the other fields.
Regards
Sangeeta -
Base value & excise amount during MRP MIGO & MIRO
Excise base amount & excise values are calulated & put during MRP based MIGO & similar process is again done during MIRO.Can't this duplicacy be avoided.
Hitesh ChaturvediHi
You have to calculate excise base value during MIGO as well as MIRO because both these activities are done by different departments.
Some times the value calculated during MIGO is wrong and is corrected by excise dept during part2 posting in J1IEX as well.
So u cant avoid it doing twice -
Mandatory miro must be done after excise posting
hi expert
i required validation/userexit that will not allowed user to do miro until excise posting is done.
i want this case to happen if material is excisale or excise capture is thr for migo.
Remark.
if sometime material excisable, we dont do excise capture or posting.
Regard
Nabilhi,
Please set this message as error message in (8I 478 )
CIN cutomizing ->SPRO->logistics general->taxes on goods movement ->India-> tools-> message control
here put application area 8I message no 478 t code MIRO and set as Error
( if this message not exist please make new entries and set as error )
It will serve your purpose .. without validation and user exit ( as it is standard in CIN)
Check and revert -
Excise is not captured in MIRO in Dealer Invoice
In dealer invoice , In PO, for Eg: Basic price : 1000 + vat 200, Total 1200 Rs.
I have changed excise duty values in MIGO . for Eg: Basic price : 900 + Excise 100, Total 1000 Rs.MRP Indicator activated
Excise is not captured in MIRO.
Regards.,
Lakshmanan.SIn case of dealer invoice you will have to change the Tax code in MIRO in your case to get the Excise calculated.
Other way is you take excise credit first with J1IEX clicking MRP indicator and properly takin excise credit, after that MIRO will automatically take excise in to accounts. -
Excise Invoice tab In MIGO transaction code
Hello
Could any body suggest, In Excise Invoice tab In MIGO transaction code I am getting "06 No Excise Entry" no otehr fields are coming.? All options like
01 Capture & Post Excise Invoice
02 Refer & Post Excise Invoice
03 Only Capture Excise Invoice
04 Only Refer Excise Invoice
05 Only Part1
Should come. Infact in my SAND Box client it is o.k but with same setting Golden Client it is not coming.?
Thanks & Regards
SudhansuHi,
These options are coming from Excise Group settings.
Go to : SPRO-Logistics General-Tax on Goods movements-India-Basic settings-Maintain Excise Groups-in 'MIGO Settings' tab, select the check boxes, accordingly you will get the options in Excise Tab of MIGO screen.
Hope this will resolve your issue.
Regards,
Gopi Chand -
Not showing Excise invoice tab in Migo while Display
Dear SAPient's,
While displaying material document in MIGO. No Excise Invoice tab is showing altough it is there while creating GRN.
please Do needful.
warm Regards,
Bijay jhaHi,
As you want to see "Excise "Tab in MIGO while displaying material document in MIGO t.code, 1st check do you have authorization to view Excise document, If yes, You can view the excise details in MIGO t.code.
2ndly check, During goods receipt , did the excise duties are captured in MIGO t.code.If yes , you can view all details if you have authorization.
Also check did that material which is excisable have CIN master data in J1ID t.code.
NOTE: To capture excise duties in t.code:MIGO, you need to do following settings:(check did you have such in your system,,,)
Select check boxes of "EI capture" & "Post EI in MIGO" in MIGO Settings segment in Maintaining Excise Group setting in following path:
SPRO --- >Logistics general - > tax on Goods Movements- >India --- >Basic setting --- >Maintain Excise Groups
Also set entry of 101 Movement Type for capturing Excise Duties in following path:
SPRO --- >Logistics general - > tax on Goods Movements- >India - >Business Transactions->Specify Which Movement Types Involve Excise Invoices
Regards,
Biju K -
ECS and SEcess field missing in Excise Invoice Tab in MIGO
What config settings in SAP 4.7 do I need in order to get the ECS and SEcess field in Excise Invoice Tab in MIGO.
Went through few threads but was unable to get a solution......HI,
In SPRO-Logistic general-Tax on goods movement-India -Basic setting-Maintain excise registration
here check your for excise registration number you have mark check for for cess and AT1
it should be there
second check you have maintain 100% setoff condition in your PO for same condition
Regards
Kailas Ugale -
Can we create routine for PO excise duty should calculate at basic amount
Dear All,
can we create routine for Purchase order excise duty should calculate at basic amount not after discounted value.
actually at per current scenario system is calculating excise duty after discount base amount, but
we want to write a routine/scenario excise duty should calculate at basic value not after discount value.
Regards
chandrashekarHi,
In my opinion you have two alternatives to resolve your problem:
1. To customize some special solution for this; this can be made by adding a new pricing condition similar with the VAT pricing condition (let's call it ZMWS); this pricing condition should be as absolute value and accepted as manual in the document / pricing procedure
2. Something similar to your solution (I have used this for some customer) to have in the credit memo two lines, one with VAT and one without VAT; the one without VAT should have a negative price = price from the line with VAT.
For this second solution I would recommend you to have two different special materials "DUMMY" materials, lets say "DUMMY without VAT" and "DUMMY with VAT"
BR,
Valentin -
In dealer Invoice , Excise duty values not captured from MIGO
In dealer invoice , I have changed excise duty values in MIGO . This is not captured in MIRO. But the system took excise value from default values ( from FV11 condition record ) . This is happening for New plants. Old plants works good.
Regards.,
Lakshmanan.Shi,
create a PO with zero tax code. such that base amount is equal to the inclusive of all excise duties.
IN migo select the capture and post excise option, in the excise tab, activate the mrp indicator .
change the base value in the migo and manually enter the excise duties in migo, capture it and then post
create MIRO with reference to the PO and give the taxcode as V1(ED-8%CESS-2%HECESS-1%)instead of VO(ZERO TAX CODE)
Regards,
velu -
Excise Invoice Tab Page/ Document Info Tab Page is not appearing in MIGO
Dear Friend
For a particular job work PO , with account assignment category F & item category L, non valuaated material, when we are doing migo, excise invoice tab page/ Document Info tab page is not appearing in document header. From The said tab page we can select the challan.
In J1ID, I have maintained Vendor PAN number and also material chpter id combination.
Thanks
ChandraHi
I maintained material chapter Id combination & vendor Excise Details. We do not maintain any plant -vendor combination. This is a non valuated material with material type unbw. Do I need to maintain cenvat determination tab for this material?
Thanks
Chandra -
Restrict the user should not allow to select No Excise entry tab in MIGO
Hi
how to restrict the user should not allow to select No Excise entry tab in MIGO
if the material Excisable user can bale to select the No Excise entry tab in MIGO . my requirement .... if the Pop come Please enter Excise Invoice number and Excise Invoice Date user should not change the No Excise how to restrict pls advise me
@sakhiThese are the options provided by SAP keeping in mind Indian Scenario. Sometimes, vendor forget to send excise invoice copy with the material, in such case, you can select 'Only Part I'.
Even if you have maintain vendor excise details & material excise details (By mistake) in J1ID, system will throw an error message, excise invoice value is zero. In such case, we can select option 'No excise entry'.
Your requirement can't be fulfilled in standard way. Even if you go for any Z- developement, you will lose the option. -
BEDRATE field in Excise item , Excise duty tab in migo
Hi,
How the field BED rate is filled in Excise item , Excise duty tab in migo
I have JMOP= 10%, but it is showing 100, why??thanks for reply,
I have taken the screens from PRD server, -
Excise conditions not capturing after batch split
Dear All,
After creating PO,OBD, Invoice found that for a material 10 qtys got batch splited as 5 CV as each line item. For one line item excise conditions were picked where as for second line item (different batch) excise conditions JEXT, ZECS & JA1X were not captures.
What might be the reason. Conditions are maintained in VK11.Dear Lakshmipathi,
PFA the below screen shots. Also fyi, from analysis tab it is showing as flowing.
Thanks & Regards,
Ganeshbabu.KA -
I have a problem with Adobe Creative Cluod. Basically after installing the application when I open it I do not charge adobe products but remains all white screen. I tried to uninstall it and install it several times but it does not work.
What should I do?Hi Anto2211,
Please follow the thread: Black screen CC where this issue is already discussed and resolved.
Let me know for any further query.
Thanks,
Ratandeep Arora
Maybe you are looking for
-
Sybase gateway problem - Failed to load dynamic library 'hsdbsyb'
Having problems getting the Sybase gateway working on XP. Environment in Oracle 9.2.0.6 on Linux, Sybase on AIX 5.1 (moving to linux, gateway currently working well on this box) gateway on XP. I get the following error when trying to use my db link:
-
Where has my drop box gone?
I can't find my Drop Box folder anywhere. I have sharing enabled and wanted to quickly share a file with my office co-worker and so I thought I would share it like that and WHAT! my Drop Box folder and all that goodness - it's gone! I can't figure ou
-
hi, i done a project in air but it seems to be slow in windows than ubuntu. Am not sure but i think it occurs when a popup is called. I didnot know why it happen so if anyone know it please give the reason and it will be helpfull
-
Finder Right Click Woes - Intel iMAC 20" Core 2 Duo (NEW)
Okay, I was hoping someone can check this for me on their new iMAC. I have found an issue where if I right click (or control click) three or more times in a row on the desktop or any other finder window, finder performs a relaunch. I am hoping that i
-
I just gave my son a nano plus and am totally clueless as to how to load music on to it. I'm not really pc literate, but can do enough to get by, but just cannot figure out how to get music from the pc and then onto the mp3. We have ripped some songs