After excuting report

Hi,
after excuting report , we will see standard screen with excute button and variant button (if exist), now i want to add another button after variant button , how can we achieve this.
thanks
sudhakar

Hi,
Just u have to write set-pf status in ur code after double click on that module pool screen will come there u can write where u want means like MENU or APPLICATION TOOL BAR or STANDARD TOOL BAR
what ever u added buttons it will appear in ur report out put.
one more that added buttons u have to write code for that also..
<b>reward me a points if it is use full answer..</b>
praveen

Similar Messages

HT5429 How long after you report a problem does it take for the fix to be picked up in maps?

How long after you report a problem does it take for the fix to be picked up in maps? The street I live on is misspelled. It's shown as one word, but it should be two words. Maps cannot find the address when it is spelled correctly, so I have it purposely misspelled it as one word in my contacts, which helps for the most part, however it still tries to place my home on an entirely different street all together. Fortunately this new random street is at least close to where I live. When I used to spell my street correctly with two words, maps would try to send me to the next town over. So it kind of works, as long as I misspell my street, and ignore the fact that it is showing where I live to be a couple of streets down from where I actually live. I live in Connecticut - not in the most populated of areas, but not in the middle of nowhere either. Amazingly enough Google Maps will correctly find my address whether it's spelled with one words or two words. Google Maps also shows my apartment complex, which Apple Maps does not. I really wish Apple would just do a quick pass of the area to fix these issues. I’ve reported the problem several times, months ago. How long will it take for there to be a fix? I keep trying to use the Apple ecosystem, but Google is clearly the better solution for me.

Apple does not do the GIS data for maps. That comes from 3rd party vendors like Tom Tom. I have read it takes some time to update map data. The only thing you can do is report it.
Not to belittle your complaint, but on my end it is Apple that is clearly better. When looking at my house in Google, the satellite photo is more than 4 years old, and the Apple one is much newer. I can tell because of the condition of my home and the neighbor's. They had an above ground pool which was removed 4 years ago and it shows on the Google Map. I had remodeling and roof work done to my home that started 3 years ago and Apple's satellite view showed this work done, which took over a year to complete. I live in the middle of a block in a rural town. Both Apple and Google split the block into 100 parts and put my home close to the beginning of the block instead of where it actually sits. I've reported it to both Google and Apple and no one has changed. Just one of those things. But, keep your chin up, it will get corrected eventually.

Access DB (& .ldb file) does not close after crystal reports

Post Author: mgold
CA Forum: Crystal Reports
Access DB (& .ldb file) does not close after crystal reports
Hi! We have a VB application using Crystal Reports 6 that has worked successfully on hundreds of systems for over 10 years. Now, on one network, the application and access database does not close. It seems to hang on the [.Close] command.
When we open the application an peruse the screens without opening up a report (using crystal reports), the application and access db closes fine. But as soon as we run a report and then close the report and try to close the application, the access db does not close. Many of the screens open the db and grab data from the access db, but it's only after running crystal reports that we have this problem. (Please see more information below.)
Setup: Application and data (access 97 db) reside on a server in the same folder, but application shortcut is kicked off on client PC. Kicking off the shortcut on the client PC means that the image/process runs on the client PC (not on the server). In this problem case, the application shortcut is on a Windows XP Pro Version 2002 SP2 PC with the app & data on a Windows 2003 server. Users are local Admins on their PCs with "Full Control"over the directory and files on the server where the data (access 97 db) resides. This type of setup is typical and has worked without any problems for clients.
The application is written in Visual Basic, using Crystal Reports 6 (using DAO). We close the recordset, set it to zero and then it hangs on closing the db (.Close command).
A few key pieces of information:
- The application closes fine if the app & data (access 97 db) are on a local PC. This includes closing fine if the application is run directly on the Windows 2003 server where the data is stored.
- It worked on this client's network until sometime in the last few weeks.
- One thing that changed is that the company is using VMWare on its servers. Not sure if they started using VMWare at the same time as it started failing. This may be unrelated. Possibly other things changed, but can't get any more information ... yet.
- It works fine running the application from a Windows Vista PC with a user who is a domain admin.
- The access db and application hang for about 10-20 minutes and then eventually closes. It appears that somehow
Crystal Reports is keeping the db open, but I'm not sure why.The application doesn't quit and the database doesn't close even if I try to end the task with the Task Manager.
- The Crystl32.ocx version being used is 8.0.0.4 (if that matters).
- I copied 6 month old program files and database files to a test folder on the Windows 2003 server. It fails using these files that worked fine 6 months ago.
Any ideas or help would be greatly appreciated! If you know of another good place to post this, please let me know.
Thanks!
- Mark

Crystal doesn't support tables in HTML interpretation.
You can probably work your way around this by doing Replace() calls on the relevant tags.
See:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes%7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636453735364436323635373233443330333033303331333233313337333033383334%7D.do
The supported HTML tags are:
" html
" body
" div (causes a paragraph break)
" tr (causes only a paragraph break; does not
preserve column structure of a table)
" span
" font
" p (causes a paragraph break)
" br (causes a paragraph break)
" h1 (causes a paragraph break, makes the font bold
& twice default size)
" h2 (causes a paragraph break, makes the font bold
& 1.5 times default size)
" h3 (causes a paragraph break, makes the font bold
& 9/8 default size)
" h4 (causes a paragraph break, makes the font bold)
" h5 (causes a paragraph break, makes the font bold
& 5/6 default size)
" h6 (causes a paragraph break, makes the font bold
& 5/8 default size)
" center
" big (increases font size by 2 points)
" small (decreases font size by 2 points if it's 8
points or larger)
" b
" i
" s
" strike
" u
The supported HTML attributes are:
" align
" face
" size
" color
" style
" font-family
" font-size
" font-style
" font-weight

Update SAP tables after ALV report is displayed

Hi All,
I have to display a ALV report using function module REUSE_ALV_GRID_DISPLAY.
After the report is displayed, user can edit some of the flds in the report, and the fields need to updated in the table. How do I proceed to accomplish this.
Is it possible to use FM 'REUSE_ALV_DRID_DISPLAY' to do this or we need to use OOPS ALV to do this.
I searched for this in this forum, but couldnt get.
Thanks in advance,
Ananth

You can use the REUSE_ALV_GRID_DISPLAY. and can make it a changable. You can specify the column to be changable. Once the user enters data into that coloumn the interna table automatically gets populated with the values.
I have done a similar program. However you might need to copy some standard GUI status based on your requirements.
Whats ur mail ID. I can send you the program I have developed.
Shreekant

After ALV Report i need to display the text below that

Hi Experts,
I need a help.
I want to display a write statment after alv report is generated.pls help me.
Please Urgent.

here is an example
call function 'REUSE_ALV_GRID_DISPLAY'
       exporting
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'
            i_callback_html_end_of_list = 'END_OF_LIST_HTML'
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
            i_save                  = 'X'
       tables
            t_outtab                = it_ekko
       exceptions
            program_error           = 1
            others                  = 2.
*&      Form end_of_list_html
      output at the end of the list - not in printed output       *
FORM end_of_list_html USING end TYPE REF TO cl_dd_document.
DATA: ls_text TYPE sdydo_text_element,
        l_grid     TYPE REF TO cl_gui_alv_grid,
        f(14) TYPE c VALUE 'SET_ROW_HEIGHT'.
ls_text = 'Footer title'.
adds and icon (red triangle)
CALL METHOD end->add_icon
    EXPORTING
      sap_icon = 'ICON_MESSAGE_ERROR_SMALL'.
adds test (via variable)
CALL METHOD end->add_text
    EXPORTING
      text         = ls_text
      sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Bold text'
      sap_emphasis = 'strong'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(normal)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Normal text'.
adds new line (start new line)
CALL METHOD end->new_line.
display text(bold)
CALL METHOD end->add_text
    EXPORTING
      text         = 'Yellow triangle'
      sap_emphasis = 'strong'.
adds and icon (yellow triangle)
CALL METHOD end->add_icon
    EXPORTING
      sap_icon = 'ICON_LED_YELLOW'.
display text(normal)
CALL METHOD end->add_text
    EXPORTING
      text         = 'More text'.
*set height of this section
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
    IMPORTING
      e_grid = l_grid.
CALL METHOD l_grid->parent->parent->(f)
    EXPORTING
      id     = 3
      height = 14.
ENDFORM. "end_of_list_html.

Problem after run report with spreadsheet

hi evry one
ther an a problem after run report with spreadsheet .
after runing iexplorar open and close fast no thing else
when i check the job from appserver job success with spreadsheet dis format.
what shall i do.
thanks.

Hello,
Do you use the Oracle Forms builtin WEB.SHOW_DOCUMENT ?
If yes , take a look to : "IE7 windows opened and closed immediatly"
http://www.experts-exchange.com/Software/Internet_Email/Web_Browsers/Internet_Explorer/Q_23304982.html
You can test the solution suggested :
We have found the setting that we needed, under the Internet Options
Security tab, if you select the internet zone, and click the custom level
button, then scroll down to the Downloads section, the first option is
Automatic prompting for file downloads, setting this to enable keeps IE 7
from interfering with this sort of download.
Regards
Example with screen shots :
http://www.celt.iastate.edu/webct/securitysettings.html
Regards

Be abble to automatically remove unused resultLists, after onTheFly reporting, onTheFly DB writing ...

Hello,
If you get memory problems, you had to tune your reports options, result collecting, load / unload modules ....
These tasks are very long, you have to point all memory consumers first ... It pollutes your test sequence only for memory purposes !
When you try to modify the result reccording, you will also have problems for your report generation ...
It should be nice to add a new feature allowing an automatic result list removing, after onTheFly reporting, ontheFly database writing have treted them ...
A kind of "OnTheFly and remove unused results"
When ontheFly reporting, and The OnTheFly database writing are over, the treated resultList should be put in a garbage structure !
Older test results could be removed if memory is needed ...
I know this could be not simple ... but this could help very much, for big sequences creation.
Thanks a lot.
Manu.net (TestStand memory dustman !)

Guys, I think I've found the strange thing.
First, in the recovery shell, when I type "lvm lvscan", it prints:
WARNING: lvmetad is running but disabled. Restart lvmetad before enabling it!
and then it says that all four my logical volumes root,boot,home and var are inactive.
So I tried to set them up manually, with "lvm vgchange -a y", and guess what happened: I was able to boot!
I still haven't managed to understand the real causes of this problem, but basically it seems that I have the same problem explained here: https://bbs.archlinux.org/viewtopic.php?id=184340.
The only difference is that there the OP says to have solved the problem with an upgrade to Linux 3.15.7, while it appeared to me with the upgrade to 3.18.3, and as I said it doesn't go away neither with a downgrade nor with another upgrade to version 3.18.4
Last edited by rdm (2015-01-29 21:55:44)

Call(PUSH) Button after executing report

Hi,
After executing report how to call select layout button automatically,
and select layout screen display at output of screen after executing
report.
Regards
Arpit

how can we pass key stroke ctrl + F9 or call function code "&0AD" for selecting layout.
pls advice.
Regards
Arpit

Form getting held after a report sent to printer directly.

Hii
I am using developer 6i.
From a form i am sending a report direct to printer using run_product & adding printer parameter.
That works fine, but after the report is sent to printer the form gets held. It doesnt do anything e.g. query etc. Nothing happens by clicking on F7 or F8.
Can anyone give an idea ?
Regards
Capri !!!

Did you try specifying the commmode as ASYNCHRONOUS. This may help.
NumbNutz

How will Apple deal with those annoying unwanted iMessages senders after we report them to your spam report email address?

I've received many annoying iMessages from different unknown accounts, some of them sending at midnight. I really want to know after I report them to your spam report email address [email protected], what will happen next? what will you deal with those guys? Really want a clean iMessage back. Ow, I would rather to close this service.

maytrue wrote:
I've received many annoying iMessages from different unknown accounts, some of them sending at midnight. I really want to know after I report them to your spam report email address [email protected], what will happen next? what will you deal with those guys? Really want a clean iMessage back. Ow, I would rather to close this service.
You are not writing Apple as every person here is a user just like you. Use the Contact Us on the bottom right of this screen to write Apple directly.

Notification after the report had been saved by scheduler

1)
HOw can I insert a record in my Db after the scheduled report is generated Scheduler and saved at the a particular location in the webserver ????/
2)How to pass the error messages occured during the scheduler generating/saving a scheduled report to the end user.
Thanks in advance,
YUg

Hi Cabio,
Before addressing your specific question, I want to let you know that you can configure the report file path in the Report File pathname tab of the report options. You can choose from a number of options, including specifying a custom expression for the report path. This will allow you to customize where the report is saved with no code changes.
If this doesn't address your needs, the problem you are likely having is that you are accessing the report object before the report is actually generated. To access the report object after it has been populated, override the ProcessCleanup callback, which executes after the report has been generated. (for an example of overriding a callback, refer to the PreUUTCallback shipping example.
Note: if you are using TestStand 2012, this method will not work unless you configure the report generator to not use a new thread. You can configure this option in the result processing dialog by selecting the Show More Options checkbox. If you do want to use a new thread, you can access the report by modifying the AddUUTReportAndSave sequence in ReportGen_ATML.
Al B.
Staff Software Engineer - TestStand
CTA/CLD

HT201210 my iPhone after restore report me an unknown error

my iphone after restore report to me an unknown error

iOS: Resolving update and restore alert messages
BTW: This is the iPod Touch fourm.

HT204088 How long does it take to get a response or a credit after you 'Report a Problem' of a charge not being correct?

How long does it take to get a response or credit after you 'Report a Problme' w/ something billed to your account incorrectly?

Try again... you should get a response within 24 hours.
Use the email form here > Apple - Support - Mac App Store - Contact Support

Problems after creating report object

I am using Crystal Reports Server XI R2 SP4. I created a report object from a simple Crystal report successfully. Even the thumbnail showed the report data even though the report does not save data.
However when I view the report object in InfoView or schedule it there is no report data even though Crystal Reports Viewer displays data when run against the same DB with the same parameters.
I get the same results with any report object I create in CMC but I was to able to successfully create and run report objects the first few(5) times after which I have been getting this result.
Is there any kind of report or job limit?
I made max records to retrieve unlimited and bumped # of jobs in every server from 5 to 50 and the age of oldest report to retrieve from cache to 0 mins.
Please help!

I'm not sure this is a JAVA problem, but if you're getting an ACCESS_VIOLATION exception from the JVM a method that provides more detailed information is to check for exceptions after every JAVA function called from the native code with (*jenv)->ExceptionCheck(jenv) and if true get information with (*jenv)->ExceptionDescribe(jenv) Making mistakes in native code constructing JAVA objects has been my most frequent cause of ACCESS_VIOLATION exceptions. I hope this helps.

Cannot load the report on PDF format after running report

Hi,
I try to use Web.show_document to run the report thru form. After that, the PDF file cannot be shown on browser (IE5.0) but the PDF file is generated successful and if use Acrobat to open it, it work.
An error as 'An error occurred trying to load this document'. (The Acrobat reader is loaded)
Thanks for your help in advance.
null

Hello,
I have found a similar problem, I think the problem my be with your acrobat settings.
On Acrobat 5. open an existing pdf file. Then on the menu go to Edit\Preferences\General. => A new screen should pop-up, click on 'Options' on the left hand side, and then check out your WEB OPTIONS. I tend to untick the 'Display PDF in Browser' and leave the others ticked.
I hope this helps.

After excuting report

Similar Messages

Maybe you are looking for