After export from imovie pictures skips

After I import from camera and into imovie(Where the video plays perfectly), But when I export the movie the picture skips. I tryed to export via quicktime and set it as pal and all others. When I export it´s like the whole camera is shacking but audio is good. What do I do?

Also three other things to add:
1. The video on both computers is presenting in a 4:3 format instead of 16:9.
2. The Second computer presenting the video is a 400 MHz G4 Tower with 10.3 OSX
3. The audio is completely fine but there is no video.

Similar Messages

Keynote presentation very blurry after exporting from imovie 08

1. export keynote presentation as Quicktime .h264 size 512x384. The exported file is a .mov and the picture quality very good.
2. Import .mov file into imovie as an event.
3. Create a new project and drag event into project
4. Share/export using quicktime
5. End result is .mov but picture quality very blurry
Any suggestions as to why the final result is so poor quality?
I have tried most combinations of file type/settings/filters.
Any help would be appreciated
jebriordan

I converted it to QuickTime using the codec and frame rate you mentioned, but when I opened the converted file in FCE, the video played but there was only beeping for the audio.
I'm not sure what you meant by making my sequence settings and my media settings match, if you could give me a step by step to check that, that would be helpful. (I'm very new to this, so I don't really understand what you're talking about there.) My camera shoots in .mod format. I think iMovie then imports my .mod files and saves them as .mpeg files. Then it saves my projects as .m4v files. (That may be incorrect. That's just my guess as to why I had the movie in .m4v format, because I didn't do anything to it other than save it.)
Message was edited by: rcpii at 1540 EDT

Missing Scenes of Project in iDVD after exported from iMovie

So I finished a project in iMovie, the project is around 1.5 hours. I've made it into 20 different scenes (chapter mark), but when I export it to iDVD there are 2 scenes missing. I already change the encoding settings to Professional Quality but it makes no difference the scenes are still missing.
Anybody know what to do?

Yes, it is very clear and very confusing. I don't think chapter markers are the problem.
Is the video all from the same source? In other words, if the video in chapters 3 and 4 are in an odd .avi format, for example, perhaps iDVD is having trouble handling it and the video needs to be converted to another format.
You may also wish to try some of the basic strategies suggested in this forum -- make sure your versions of iDVD and QuickTime are up to date, make sure there's enough hard disk space on your main HD (15+ G on boot drive), delete your preference file for iDVD (plist file) since it can become corrupted, empty your iDVD cache...
John

High CPU usage after export from iMovie

Makes you go hmmmmm...... Mavericks 10.9.4, 2.3 GHz i7 16 GB 1 TB. 33% full. A 32 minute camcorder movie. No editing just export. Latest iMovie and everything else no added plugins or 3rd party anything. While exporting the movie 1280X720 it uses about 200% CPU (2 virtual cores)? After the export is done it starts using about 350% CPU and will do so forever. I thought maybe it was straigtening up afterwards but it went on for about a half hour. This causes me no problems but like I said it made me go hmmmmmmm..... In case you couldn't tell I'm a newbie. I had XP for about 800 years and this is my Christmas present. It's wonderful.

Yes they are in the same folder. After I added my Exchange account under Configuration | Mail, Contacts & Calendar, mail started to eat CPU time. If I look a the activity window of mail I see a message "downloading incoming messages" in chunks of 50-100 messages every few minutes. Maybe this is the downloading of bodies (and attachements) of my large 50K messages archive map.
I just disabled the mail part of the Exchange account under Configuration | Mail, Contac ts & Calendar and the CPU eating seems to stop. I'll just see the coming hours.
I currently do not use any mail plugins.

I need a picture from an event that I only have video of. Is there a way to get a jpeg/still shot exported from imovie clip? I'm a fairly new mac user.

I need a picture from an event that I only have video of. Is there a way to get a jpeg/still shot exported from imovie clip? I'm a fairly new mac user.

John Codgell has some tips on how to use MPEG Streamclip to do this on this Discussion Thread:
Helpful AnswerRe: can you make a still photo from clip

IDVD Stops Responding when Exporting from iMovie

I'm using iDVD and iMovie (from iLife 06 and fully up to date) on a MacPro (also up to date on all software, MacOSX, Quicktime etc).
This proceedure has worked before several times but now results in a non-responding iDVD every time I try it, including an archive and re-install and a complete new install of OSX and all software on a new partition.
What I'm doing.....
[1] Recording a TV programme on EyeTV (410) and exporting it to iMovie - sucessful every time
[2] Edit the iMove project and add chapter markers and save project - no problem.
[3] Export to iDVD - iDVD shows exporting in progress and whilst this is still showing iDVD launches
[4] iDVD starts playing the music from a std theme for a few seconds and then stops. Then resumes the music after resizing the window and then after a couple of more seconds freezes. From the Dock I can see that iMove and iDVD are "not responding"
[5] Eventually iMovie completes it's "export" and then starts responding normally. iDVD continues to show as non responding although I can move the window around the screen. I have to force quit iDVD to get it to close down.
I have tried:
Re-exporting the project from EyeTV
Deleting the preferences files for iMove and iDVD
Deleting the iLife suite and re-installing
Doing an OSX archive and re-install
Installing a fresh OSX (10.4.8) on a different drive and installing fresh software
Running Disk Utility - clean bill of health on both drives
Repaired permissions
The Console reports the following errors when exporting from iMove to iDVD:
===== Tuesday, 24 October 2006 22:56:45 Europe/London =====
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 0
[KN,10:57:08:852]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
[KN,10:57:11:968]/SourceCache/iDVD/iDVD-791/./PBProjects/iDVD/RemoteControlContr oller.m:348 : switchTheme: mIsPlaying = 1
2006-10-24 22:57:53.394 iDVD[424] NSExceptionHandler has recorded the following exception:
NSInvalidArgumentException -- * -[NSCFArray addObject:]: attempt to insert nil
Stack trace: 0x954ee243 0x9264f2cb 0x9264f110 0x925dd399 0x000df708 0x000df806 0x00215e6d 0x002167ef 0x0021470b 0x001a0b4f 0x00184105 0x92627d78 0x92627222 0x92626fa9 0x92626811 0x92621ae0 0x00166dc7 0x9261e861 0x925f2ef1 0x925f2d1b 0x9151d6c5 0x9151d5f6 0x9151d4c2 0x92dda340 0x9325c63d 0x9325c056 0x93255ddb 0x93249d2f 0x0000ad5d 0x0000ab36 0x0000aa51 0x00000002
Result - problem persists. I'm at a loss as what to do next. Any suggestions greatfully received.

Yes, tried that when I deleted the preferences. Disk Utility did not report any permissions needed repairing.
What really mystifies me is that this export to iDVD did work once and I expected it to resume once I'd created a fresh OSX install along with all the iLife apps on a new partition, but it remained the same!
Perhaps there is some sort of other software conflict going on? I have Adobe CS2, MS Office, Toast and FMP installed all are latest editions. On the utilities front I have installed Stuffit Deluxe, Internet Cleanup, Contour USB controller for video editing and a LogicTech wireless trackball. Again all the drivers are the latest releases.
Does anyone know if there are any preferences associated with the other not responding applications listed in my other post that I could try the delete-reboot trick on?

Best way to export from iMovie so that clip will play in Powerpoint on Windows?

Does anyone know the best settings so that a movie exported from iMovie will play in Powerpoint on a Windows machine? Thanks.

You need one of the more expenseive Flip4Mac options. Flip4Mac Studio, Studio Pro, Studio Pro HD, for example.
Flip4Mac supplies a video component. To do the conversion, you need a tool like QuickTime Pro or Compressor. You take the file you created in iMovie and convert it using QuickTime Pro using the supplied component.
It is possible that a free tool like MPEG Streamclip would do the conversion (after purchasing the Flip4Mac components) but I haven't tried it personally.
You cannot do this conversion from within iMovie. You need to SHARE from iMovie, then convert.

Best method for exporting from iMovie?

I have been having a lot problems with exporting from iMovie. I have a 30 minute movie that I want to compress to a file around 400~500mbs. I found the best results with Divx and .Avi files. Unfortunately, after I installed Tiger, I noticed that the audio was faster than the video, like " old kung-fu movies ".
I read in other forums that there are many problems with Divx compatibilty with Tiger. Whie waiting for a new version of Divx, can anyone give me some advice on the best way to export a movie from iMovie( good audio and video quality) thanks in advance!!

http://www.danslagle.com/mac/iMovie/tips_tricks/6007.shtml

Audio drops when movie exported from iMovie into iDVD

Hi there,
I am a problem which I can't seem to fix.
I have created a 7 minute long slideshow in imovie with MP3 files from iTtunes embedded. The video and audio are fine when exported as a MOV file (and within iMovie itself). But when exported into iDVD for burning, the audio drops out completely after 3 and a half minutes.
I've tried updating iMovie, iDVD etc., deleting encoded assets as it says to do here: http://support.apple.com/kb/TA24043?viewlocale=en_US
to no avail.
Does anyone have any tips? My friend's wedding is on Saturday!
Thanks so much.
RR

Hi
A. I do not use "Share to iDVD" - BUT "Share to Media Browser" and as Large (not HD or other res.) - Works much better.
B. When did it hang ?
a. On Export from iMovie to iDVD
b. When DVD is played on DVD-Player
If last one - then
• What brand of DVD did You use (Yes it matters)
• What type of DVD
• Free Space on Start-Up hard disk - How much
• Burn speed - did You set down this - I do to x2 or x4
Yours Bengt W

No sound when exporting from imovie 3,03

After having read most of the posts related to sound troubles, I still can't figure out why I can't get any sound when I export from imovie 3,03.
I almost know the entire dan slagle site, and checked every button to play with, I've tried many export or preferences settings (including various depths or rates) but got no result at all.
Surprisingly, when I grab the .mov file to some converters (ffmpegx), the expected audio part looks to be there, but remains silent (for me, meaning all of the bits at 0).
Don't hesitate to require additional info - thanks to prompt answers
G5 2xPPC Mac OS X (10.3.9)

hurrah !
i just downgraded QT 7.x to 6.5.2 and it worked fine at last.
From the informations I've gathered, DO NOT RUN QT 7.x WITH OSX 10.3.9
For those who would follow the appropriate steps to get rid of v7, go to : http://fox-gieg.com/tutorials/2005/undo-quicktime-7/
and don't miss : http://www.charlessoft.com/
Thanks a lot to Brie Fly for its so helpful comments.

Best practice for exporting from iMovie '08 to iDVD

I am looking to find out what is the best practice for exporting from iMovie '08 to iDVD. I have read the other postings that give the basic howto (export to Media Browser then select the video in iDVD). However, my question is a little more technical. I have 1080i HD projects. I am interested in burning them to DVD in the best possible quality. What setting should I be using when I publish to Media Browser?
I am wondering about quality loss due to more than one conversion/compression. I suspect that when I export to the Media Browser then this is occurring. If I am not mistaken iMovie is using something like H.264 for this. Then, when I run iDVD I suspect it will it do another conversion/compression, I think to get to MPEG2. Not only could this result in a loss of quality but also it will take extra time. I am interested to know what others think about this.
Finally, I am looking to create DVDs for a lot of video. I am wondering if there are any USB or firewire hardware devices out there that could speed up the compression. I use the Elgato Turbo.264 when I want to encode to H.264 but I wonder if there is something similar for DVD creation.
Thanks in advance.

the standards for videoDVD are 720x480, and usually mpeg2 encoded..
so, your HiDef project HAS to be 'downsampled' somehow..
I would Export with Qucktime/apple intermediate => which is the 'format' your project is allready, and you avoid any useless 'inbetween encoding'..
iDVD will 'swallow' this huge export file - don't mind: iDVD cares for length, not size.
iDVD will then convert into DVD-standards..
you can 'raise' quality, by using projects <60min - this sets iDVD automatically to highest technical possible bitrate
hint: judge pic quality on a DVDplayer + TV.. not on your computer (DVDs are meant for TVdelivery)

IDVD: Files exported from iMovie 11, one works, one "Unsupported File Type : Unknown format"

I used footage from the same camera (taken on the same weekend using the same settings) in several different iMovie "projects". All were shared from iMovie 11 as "File" using the quality setting "SD 480p".
In Quicktime Player, all ".mp4" files will play and they show the following info in its inspector:
Format: H.264, 854 x 480
AAC, 48000 Hz, Stereo (L R)
FPS: 29.97
One exported file will drag, drop, and burn in iDVD just fine. The other two files show the error "Unsupported File Type : Unknown format" as soon as I try and drag them into iDVD.
The only difference I can find is that the one file that works is about 803MB, while the files that don't work are 1.87GB and 3.98GB.
All files and the iDVD project are in the same folder on my startup volume. I've tried deleting com.apple.idvd but that didn't help. I've tried rebooting and starting the iDVD project from scratch but I get the same results.
Mac OS 10.9.1
iMovie 10.0.1
iDVD 7.1.2
Any ideas?

Hello Bengt and thank you again for the replies.
As I mentioned in my previous posts, I'm using iMovie 10.0.1 which has very limited quality adjustments. In every case I chose the smallest size, which iMovie 10.0.1 calls "SD 480p (854 x 480)". I used this same setting on all exports.
I still have iMovie HD (6.0.4) and iMovie '11 (9.0.9) on my iMac so I tried both of them. In both cases, they could import only the file that works in iDVD. Both older versions of iMovie choked on the longer movies shared from iMovie 10.0.1.
I have many many hours into the editing of these clips and I do not want to have to go back and redo everything in an older version of iMovie. Might I be better off going with a different DVD creation software? Or am I out of luck? Because I can't really change iMovie 10.0.1's export settings, I'm afraid there's nothing I can do to get it to export it as something that iDVD can use (really, I can't even tell why it's different and why iDVD doesn't like it).
The software "WonderShare DVD Creator" has no issue with any of the files I've exported from iMovie 10.0.1.

Cannot Open Excel File after exporting from Disco Plus

Hi there,
I got a question from one user having issue with opening Excel file after exporting from Disco Plus.
The report has been using for a while and he is using Excel 2003 version and Discoverer 10g(10.1.2.2), he never got this kind of error before, just recently got error.
After exporting from Disco Plus he saved file on his desktop and when he tries to open the excel it says "Cannot be Accessed, can be corrupted...." but this is not from network drive since he saved file on local desktop or C drive.
Also not for all reports, only this particular report and only specific parameter, for example for parameter 2008 Feb opened successfully, but for2009 Feb he gets this error when trying to open excel.
i tried in excel 2007 also , i dont think this is Excel version error, am not sure.
Also after go live last week (we upgraded database from 9i to 10g) but i am not sure this causes ,since for one parameter working, for other parameter not working.
Actually we should get one window for Macro when we try to open excel, but he is not getting it seems.
Any ideas/thoughts on this would be greatly appreciated.
Thanks for your help
--skat

Rod,
Thanks for your quick response on this.
Yes, we can export to other formats as well, but actually exporting is working, after saving the file on our local desktop/drive and when we try to open we get this kind messages or we cannot open the file, we should get message window for Macro to enable/disable but for this report we are not getting this either,
Also this happens only for specific parameters,like i mentioned above it works I mean excel file opens for one set of parameters but for some other set of parameters cannot open.
For example :- when we enter FEB 2008 it works, if we enter FEB 2009 it won't open the file.
This is weird
I am still working on this issue, may be better to recreate the report again might be helpful,
Any ideas/comments/thoughts would be great
Thanks
Skat

How do I export from IMovie when "not enough room in Heap Zone" error code appears? How can I correct, what to Do.."export movie" insteand of Media browser or IDVD? Finalize movie? I want to burn it to DVD!

How do I export from IMovie to Wondershare Creator to Make DVD and share hour long movie when I am unable to "publish" movie on Media Browser of IDVD because the error code "not enough room in heap Zone/ " appears and function is aborted.
I shortened the movie, that is no cure...Correcting date info on clips does not pertain. Why would Apple throw roadblocks in your way without solving problems they create?
A techie made an appointment on the phone and was totally incapable of addressing the problem.
What is a heap zone????

Instead of Share to Media Browser, what happens if you try Share Menu > Export Movie... (choose Large size) and save it to the Desktop?
If that fails try Share Menu > Export using QuickTime...
Then pick Movie to QuickTime Movie, then click on Options... which is just to the right of Export
Under the Video section click on Settings...
Then in the pulldown menu at the top, titled Compression Type: Choose Apple Intermediate Codec. Then click OK. And click OK again, and save it to the desktop. Once the .mov file is created, you can import that into iDVD and most likely it will work in Wondershare Creator if you prefer to use that instead.

Best way to export from iMovie 09 to iMovie HD

Due to a) image quality issues, and b) no export to tape feature, I need to stick with iMovie HD for all my editing needs.
However, I do want to use those nifty map and photo animations in my iMovie HD project. What are the best settings for exporting from iMovie '09 to a format that works in iMovie HD and is 1080i? Since I'm working with HD files, I don't really care about size.
Thanks!

Thanks shawk, however, the DV stream is not in HD. It exports in 720x480 I think.
I've had some time to test out the AIC more. I can't find a difference between the 1080i and 1080p (even though it converts down to 1080i for the final). There doesn't appear to be a noticeable loss in quality and it seems to work perfectly with iMovie HD. Maybe I answered my own question? haha.

After export from imovie pictures skips

Similar Messages

Maybe you are looking for