After exporting finished movie project, one clip is gone but all others are visabel

I hope someone can help me out. After importaing my movie project from iMovie into FCPX I made some changes to the project and was able to exported it. After exporting, all clips we visable with the expection of one. How can I fix this? The original event is in my list so I have no clue what is going on.

File>Relink Event Files.

Similar Messages

Can no longer update one of my iWeb pages (all others are working properly)

I have an iWebsite with several pages. One of these pages is no longer working correctly. The page that is causing problems contains a series of text boxes and hyperlinks (which allow people to download PDFs). I can no longer update the vast majority of this page, nor can I see where the different text boxes start or begin. (I am currently only able to change the title, not the body.)
When I go online to look at the actual published site, I am able to download all of the desired PDFs, however I cannot highlight or copy any of the text written on the page (this is not the case for the other pages of the website).
I have updated this page several times over the last few years and have never run into this problem. Does anyone have any suggestions as to what might be wrong and/or how I might remedy the situation?
Thank you in advance!!! Your advice is much appreciated!

+You mean you can't see the text or can't see the text box sides and drag points?+
+Do a Select All and see what you see.+
When I select all I am able to see the text box that houses the body of the page.
+What happens if you were to click in the center of the page and hit the delete key (you can always do an Undo command)?+
Nothing happens. I can only delete the entire page (using the select all approach).
+What happens if you click on the center of the page and drag to one side or another?+
Nothing happens when I do this. I can move this main text box by moving each side individually.
+I can see the text in the page's html file and it is an image file: http://web.mac.com/naomieisenberger/san/NaomiEisenberger_SAN_Papers_files/shapeimage1.png. If you go to the page it's a very fine, 1 pixel, image at the very top of the page. You'll see the cursor change to a magnifying glass. At that time click and drag to the desktop. It won't look like you're dragging anything till you get to the desktop.+
Yes, this is the problem. This space is acting as if (or rather has been) converted to a graphic. Each reference listed on that page has been entered separately over time. It seems like the last time this section was updated it was saved as an image/graphic. I am not even sure how this would have happened or how to undo this issue. Do you know or have any further suggestions?
Is there a way to view the html code on iWeb. . . to just work in code?
+So you have to somehow figure out how to get it back to plain text. Do you have iWeb's preferences set to display the text image indicator?+
Yes, there is a small yellow symbol.
+You may have to create a new page to replace this one.+
Thank you so much for all of the great advice!

I recently lost my iPhone and purchased another, I cannot seem to see a few of the movies I purchased in the past but all other purchased media is installed, what should I do?

Can I redownload movies I purchased in the past even if it was not backedup?

No. You can only reload apps, Music (currently US only) and books. The phone should be synced regularly so you have everything in your library.

Can not connect to a cluster and hyper-v manager(to one of my hosts) but virtual machines are running (hyperv2012r2)

Hello guys
I'm using a cluster hyper-v 2012 r2 with 9 hosts and after 12 hours without energy, it back again. my problem is:
my cluster do not back
all hyper-v hosts are and running hypervisor... all vms running... my problem is the cluster.... quorum do not back online...
i found the problem... the wmi is not working in one of my hosts and in that, i cant connect to this hyperv manager... from anywhere.... the virtual machines are running on this host... but i cant manage them...
i found an article talking about this and now, im running this script.... but nothing hapen
"C:\windows\system32\wbem> mofcomp.exe cluswmi.mof
Microsoft (R) MOF Compiler Version 6.3.9600.16384
Copyright (c) Microsoft Corp. 1997-2006. All rights reserved.
Parsing MOF file: cluswmi.mof
MOF file has been successfully parsed
Storing data in the repository..."
someone can help me?
tnx!

Tnx for the ansywer..
"When you say "my
cluster do not back" do you mean that the cluster is not running?"
yes... i cant connect to the cluster
Is "quorum
do not back online" another way you are saying the cluster is not running?
yes
Are you using disk witness or file share witness? Recommend
to use disk witness as it provides a more robust level of operation.
witness
Did you run the cluster validation wizard? Turn off the disk tests to prevent VMs from
failing over, but run all other tests. What errors/warnings do you get?
When i try to run validation tests, one of my hosts (same that i cant manage vitual machines), fail to join in tests but all others are tested

Import whole movie as one clip in imovie

Hi, not sure if I am posting this in the right place now - ah just looked down below my post and it appears it will put it in the imovie forum, good
I have never used iMovie. I've used several video editing products in past years, but haven't done much recently and now I have a deadline of Christmas eve to get this done.
A good few years ago we transferred all of my wife's family home super 8 film to DV format and then spent weeks editing them down to a very nice 20 minute video with music. Made a bunch of DVDs but over the years, they seem to have all stopped working or been lost. The master is still on DV tape and I now have my sony camera linked up to my MBP and it seems to work very well once I got the firewire to thunderbolt connector. It controls the camera perfectly, better than a lot of products that I used to use.
So my problem is ithat when I imported the video, it cut everything up into clips.... and when I put all the clips into a movie they do not play seamlessly... as I don't want to do any editing on this, I just want it all as one long clip so I can export it into suitable formats for my sister-in-law to download on Christmas day...
So I have gone back to the import process and I couldn't seem to find any settings or anything for adjusting how the video is imported from my camera.
I certainly hope this can be done... not so much video editing I want to do, but more of a conversion process I guess, any help would be urgently and greatly appreciated!

hmm, after 24 hours of searching etc I have come to the conclusion that iMovie is pretty rubbish at functionality and a way for Apple to push it's iDrive and get me to pay money for it as well... :-(
I tried putting all my clips into a movie, but the audio skips between the clips and I can't reduce the transition to 0 - so actually no way of recreating my whole movie again and no way of capturing the whole movie in one clip - granted I've only been using this for a day, but after years of video editing I cant say the interface settting or anything else is intuitive about it... seemed promising at first, but in the end I got my old version of Adobe Premier out and it did what I needed first time, no fuss. Afraid iMovies is heading for the trash.

I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

So, I downloaded a slideshow templates and I'm trying to make a timelapse with 900 pictures converted into 30 fps to get a 30 seconds video but after exporting my movie why is my video length 15 minutes?

What settings are you using to export the video with? I think 29.97fps is the only one that works with LR 5:
http://lightroom-blog.com/2013/09/17/timelapse-again-in-lightroom-5-2/
http://lrbplugins.com/shop/presets/lrb-timelapse-presetstemplates/

K recent upgrades my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

I recent upgraded my mac laptop to lion. Since then iMovie crashes when i try to export a movie project. I ofter get a message that says not enough memory in the heap zone. What can be done?

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

In fcpX....how can I put an IN and OUT points in my sequence and after export a movie???

You can't. You can't export part of a sequence. Duplicate it and remove the bits you don't want to export from the duplicate.

After exporting to quicktime file, the file has sound but no video, what am I doing wrong?

after exporting to quicktime file, the file has sound but no video, what am I doing wrong? The self contained movie box is not checked.

Hi
Did You go via Compressor ?
Did You use QuickTime Conversion ?
I don't
I do
• In TimeLine set In and Out-Points to the full Movie/Project
• Select ALL - Clips and Audio
• Go up to Sequence and down to Render Only - down to Mix Down Audio
• then Sequense and Render Selected - Both (Video and Audio)
• then Export and as QuickTime .mov (NOTHING ELSE)
• I use to do - Not Self-Contained as it saves both time and space
Your Start-Up (Mac OS) Hard Disk - Needs lot's of free space to work OK - I never go under 25Gb free space on this one,
Good Luck - Yours Bengt W

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that the program is "locked or in use by another user". I need this fixed immediately.

I am unable to open my Photoshop program after installing the entire Creative Suite: Premium Production 6. All other programs work, but with Photoshop it says that it "Could not open a scratch file because the file is locked, you do not have necessary access permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file." Then I select "OK" and the next message comes up "Could not initialize Photoshop because the file is locked, you do not have the necessary permissions, or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock this file. I installed all of the programs on the same day from a CD. I need this fixed immediately.
I am not interested in switching to Creative Cloud, so don't even suggest it. I spoke to Mashmi (or something to that effect) on the "Support" Chat and there was absolutely no support. Useless actually.
Thanks in advance.

Could not open a scratch file because the file is locked or you do not have the necessary access privileges. (…) | Mylen…
Mylenium

Since I synced my ipad to my iMac I have duplicate photos appearing in the Photo section on my iPad and one can be trashed but the other one can't. How can I get rid of the ones without the trashcan?

Since I synced my ipad to my iMac I have duplicate photos appearing in the Photo section on my iPad and one can be trashed but the other one can't. How can I get rid of the ones without the trashcan?

Thanks so much. I was afraid to mess with that. But when I unsynced them, it worked.

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4

I am trying to import movie files into to iMovie. They are home videos so I use handbrake and VLC to put them onto the computer and convert them to MPEG-4 files. I successfully imported two of the videos but the others are not working, they are all MPEG-4 files. Now, they are not compatible. How to I get them into imovie?

Hi
I use
• DV-PAL or DV-NTSC - or -
• AIC
Yours Bengt W

I have a 17 inch Mac book, after migrate to Lion, I take 25 seconds to shutdown. all progams are closed. any reason?? Need I to install a native Lion OS to solve the problem? Regards, José A. Pereira

I have a 17 inch Mac book, after migrate to Lion, I take 25 seconds to shutdown. all progams are closed. any reason??
Need I to install a native Lion OS to solve the problem?
Regards,
José A. Pereira

Hi, Processor 2.66 Ghz Intel core i7, memory 8Gb 1067 Mhz DDR3.
on shut down a White screen occur with a star flashing during more or less 25 seconds. before update to Lion, 3 or 4 seconds to shutdown. no more app installed or removed. it stills the same usage.
I will be greatful if you can help me.
Regards,
José A. Pereira

I need to deactivate two old computers and reinstall CS3 on two new computers. How can I do this if one is long gone and the other just crashed?

I need to deactivate two old computers and reinstall CS3 on two new computers. How can I do this if one is long gone and the other just crashed?

contact adobe support and request an activation count reset, http://helpx.adobe.com/x-productkb/global/service1.html

HT1657 I downloaded a movie and it plays without sound. All other videos and music play fine. I down loaded it 2x and it still doesn't work.

I downloaded a movie and it plays without sound. All other videos and music play fine. I down loaded it 2x and it still doesn't work.

Hi, thank you for your consern,
I have Window Vista...Im not to computer friendly when it comes to deep details about the systems so I dont really know if its 32 or 64 bit but I did see that it is 919 bytes.
I WAS able to see the videos before the upgrade and the flash animation does NOT rotate in red F.

After exporting finished movie project, one clip is gone but all others are visabel

Similar Messages

Maybe you are looking for