After exporting, movie file is nowhere to be found.

I set my iMovie '11 to export 1080p one time and 720 the second time, however, after the hours of export time, no file was made and put on my hard drive. The mb's were taken from my hard drive as if it were created however. Why?
Also, yes, I made sure to have enough space before I began the exports.

I didn't, but I did specify the location each time that I exported. First, it was to a designated folder not too dissimilar to what you suggested. The other times, I specified the Desktop. No where to be found. More importantly, my hard drive's available MB's shows the same amount that it showed prior to starting the export.
To review my problem:
1) It's at 9 gigabytes available when I begin
2) It says it needs 6 to do my video.
3) I begin it, and it goes through the export
4) It finishes.
5) The available hard drive space is 3 GB.
6) The movie isn't where I specified.
7) I did a finder search for the file without luck.
8) I restart the CPU, and it shows 9 GB available again.

Similar Messages

Keep video metadata after exporting MOV files

Hello !
I use LR5 to manage RAW/JPG/MOV files from events where I have taken pictures from. Most of the MOV files do either come from my Canon Camera or from my iPhone.
I regular export the files in a reduced file back to my iPad or iPhone for "public" viewing. Unfortunately LR5 is loosing all metadata from my videos, especially creating date/time and GPS tags.
Is there any way to include metadata in exported (and compressed) video files ? It works in photo's very well.
If not, do you know any other program which can compress original video files from my iPhone and keep the metadata ?
Thanks

Cragen,
A very Good Day!
Lightroom does not read metadata from the video files till the version 5.3.
However, the functionality may came as a feature in the coming version of Lightroom!
If the same is not visible in Lightroom make sure the files are copied to the system and then check the same in Lightroom
Source: http://helpx.adobe.com/lightroom/kb/metadata-doesnt-import-video-files.html
Let me know how it works.
Cheers!
Mandhir

Exporting .Mov files at 24fps for Final Cut Pro 5

I work at an animation production house and we're trying to export .mov files from QT 7.1.2 at 24fps so they won't have to be rendered in a FCP project which is a 720p project with a frame size of 1280x720, we're experimenting with two codecs. We're using Motion Jpeg A and Photo Jpeg, selecting 24fps but for some reason they import into FCP 5 at 10fps. It's as though QT isn't outputting accurate 24fps .mov files. When I export .mov files from FCP they import back into FCP without having to be rendered. What's the difference between the ones exported from QT vs. the .mov files exported from FCP. We're using the exact same settings and files....? The reason we need to use QT to do this is because it needs to be a somewhat automated process (lots of stills to work with) and our PA's are working on Windows with QT only.

You should post your inquiry at Final Cut Pro section for better support. Anyway, Final Cut Pro does not always recognize the frame rate correctly, depending on which application (and possibly which codec) you used to compress video. For example, Snapz Pro X and Adobe After Effects don't get along with Final Cut Pro in this respect. Furthermore, compressing video in H.264 will be a bad idea. So simply adjust the size of Canvas so that it won't cover the whole screen. In this way, you can even replay video on Canvas and even send it for final production.

Exporting movie file from iPhoto

I have a Panasonic Lumix that takes both still photos and movies. The movies and still photos are transferred from the memory card to iPhoto. I would like to use some of the movie clips (.mov format) in an iMovie project. I transferred the movie files from iPhoto to an external hard drive by using the File > Export function. All appeared to go well. When opening the transferred file on the external hard drive, the file size is much smaller than one would expect and the cursor goes right from the beginning to the end as if it was a still photo. In the export function box, the "kind" options include original, current, JPEG, TIFF. I chose current. It does not give an option for file size. The movie file opens and works fine in iPhoto but not the same file transferred to the external hard drive. To make matters worse, I deleted many of the iPhoto movie files after transferring them to the external hard drive and so they are lost forever. Is iPhoto not designed to export movie files ? Any suggestions ? Thanks in advance

Is there any way to export an entire album of both movies and photos at once? I want to set the movies to export as original and the photos as JPEG, HIGH, with Metadata. Possible?
No. The export window will only take one set of criteria at a time.
Regards
TD

Exported .MOV file is faded like the gain or saturation was turned down.

Hi,
When I export a misic video as an .MOV file it is 1. extremely large and 2. faded like the saturation was reduced.
Does anyone have settings for exporting MOV files of a 3 minutes music video so that it will come in under 415 MB.
Could someone help me figure out how to compensate for the desaturation?
Thank You,
Mel

Thanx Hunt for pointing me in the right direction,
I'll research that.
Mel

How do I import playlists from my old computer to my new computer. I followed the instructions to export the playlists, but when I tried to import on the new computer the files were nowhere to be found?

I saved my playlists on my new computer as per the instructions in iTunes help. Then I tried to import the playlists on my new computer but the files were nowhere to be found. Found the correct directory, but not there. my computers are connected on a network, so I don't know what I am doing wrong? Anyone have any ideas?
Thanks,
Paul Constantine

Copy the entire iTunes folder from the old computer to the new one.
tt2

Quality not the same after exporting movie made up of jpg images

Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?

Maybe I misunderstood, but did you actually put 2000 still images on the timeline? If so, there is another way. Go to Import and find your folder, and select only the first still in your sequence, then check the box at the bottom of the import windows that says "Numbered Sequence" or something like that. This will import the stills as a "video" clip.
Regarding Export, don't check Frame Blending or Max Render, the first being for a change of frame rate and the latter being useful for a downscale of the frame size.You are doing neither.
Also, never use "Match Sequence Settings". Leave that unchecked, and then choose whatever format YOU want to use for the export, whether .avi or H.264 or whatever.
Thanks
Jeff Pulera
Safe Harbor Computers

After export movies works and then is not working anymore?!

Hi guys,
i am capturing HD movies to my final cut express HD..Edit them, expert as quick time movie (option self contain is OFF). Then i test the movies and they are like they should be. Then i import them into IDVD and IDVD accept some and some not. So when i check the not accepted movies they only play the sound. While 10 minutes before the movie was working correct.
After a few times (making the same movies again and again on the same maner) IDVD accepted alle the movies. But when i wanted to burn the dvd it gives me a error about a missing movie file, again and again?
It worked all okay when i made my other dvds.
The only thing changed at this system is that i upgraded to Ilife'11
What am i doing wrong?
Thanks in advance!
Ps. my movies are HD (1080i)

Could it be that the link is broken after i change the movie from folder to a >other folder ?
The FCE Project File or the export?
Sequence>Render Only>Mixdown.
This action makes one temp file out of all your audio. It makes a difference to exported files playing correctly in the audio department.
Al

Exporting .mov file from CS5.5 Premier Pro for playing through QuickTime Player

Dear All,
I would most appreciate any assistance on a problem that I am experiencing with a current project.
I have a HD1080i50 project which I have completed editing. The work consists of two video tracks on top of a black video track that presents two identically sized images side by side that run con-currently. To achieve this presentation I have solely reduced the scale of the clips to 44% and then positioned them side by side. After rendering, within Premier, the playback is exactly as I want it and the imagery is sharp and clear. The problems occur when I either try to export the project as a mov. file (to play using Quicktime), or when I export to Encore and produce a DVD. In both cases, the audio is fine but the imagery is slightly blurred.
In the first instance, would someone be kind enough to recommend the optimum export codecs to creat a .mov file for playing through QuickTime?
To date, with earlier projects, I have not experienced this problem. I am obviously doing something wrong in the export settings process and would appreciate it greatly if anyone can advise. Should more info on the project be required to respond, I am happy to provide it.
With thanks in advance.

In the first instance, would someone be kind enough to recommend the optimum export codecs to creat a .mov file for playing through QuickTime?
Sure, but we need to know what you intend to do with the file. Is it for distribution? Archiving? Watching on a computer, or watching on the web? Do you absolutely need to have a QuickTime MOV? There are many variables, not the least of which concerns the exact specifications of your sequence and the footage you're using in the sequence.
To make a better recommendation, some more information is needed.

Exporting .mov files from iPhoto...

My iPhone barely has free memory so I wanted to transfer my pictures and videos from my Camera Roll to iPhoto. Then, I tried exporting all those files to my external hard drive. After waiting for an hour, exporting was finished but I observed something weird: the size of the folder containing all of the photos and videos that were just exported was 16GB, while it is said in iTunes that those files should take up 21GB of memory. I tried to investigate why. Scrolling down, I noticed that nothing seemed to be wrong with all of the photos (.jpg). But, when I tried to play the videos (.mov), the QuickTime Player only displayed a black screen with no accompanying audio. I tried using VLC, but it wouldn't play anything as well. The duration of the videos were the same, though. So, my speculation is that the reason why the folder had a smaller size was that the videos imported from iPhoto weren't properly copied. Afterwards, I checked the file properties of one .mov file. To my surprise, the videos were working in the preview found in the lower portion of the properties tab. The size of one video was: 70,255 bytes (131 KB on disk). That kinda confused me because (even though I'm not a tech buff), I know that 70,255 bytes is not equal to 131 kb (unless you can prove otherwise). I also do not know what "on disk" exactly means --- maybe this is the reason why the folder says it has a size of 16 gb instead of 21 gb? I really do not know...
OK, so I tried to give what I thought was helpful info so that I may receive a solution to my problem. If ever you need to ask for more information that may be necessary for you to answer my case, please do state what they are. I'll check on this question from time to time and I'll try to respond as immediately as possible. Thank you!

Thanks for the questions TD!
Mac Pro OS X 10.9.2
Ipad is 7.0.6 and the videos are still on my Ipad and I can play them on the Ipad. This is where they were originally created, on my Ipad, March 2013.
Iphoto '09, version 8.1.2
No, the videos do not play in Iphoto. They have the camera icon on the lower left identifying them as a video and the seconds or minutes, as the as the case may be on the lower right, ex. 0:23, and also identified as a Quicktime movie with size information, ex. 480x640, 12.2 MB.
Some of the videos were taken in portrait and some in landscape, same problem regardless of orientation.
I have videos created before this date and after which play fine and also which exported with no problem. Haven't tried all of them because I have a lot of videos but just a few to test.
I'm now wondering if I can simply delete the videos from Iphoto and reupload them from the Ipad since they are still on there and playing no problem. Or has the software changed and is no longer directly responsive.
I appreciate your time and any suggestions you may have for this particular problem.

Previews in LR 1.0 look different after exporting to 'file'.

Hello everyone, I'm new to LR and somewhat new to PS (PS CS3). I'm starting to shoot mainly in NEF but have many more jpgs on file. While editing jpg's in LR for a Quinceanera (shoot w/ D200,JPEG,sRGB working in Win XP) I've had to, on occasion, finish editing in PS CS3 (blemish removal, USM in Lab, Gaussian Blur, etc.) after saving as a PSD and returning to LR and then 'export' the file back to jpg in a different folder (on Desktop) for easy finding I notice a 'change' in appearance in additional previews that I click on (back in LR) ONLY in the Develop Module! In Explorer and also the 'final' folder on the Desktop all images look the same (good). As I move my mouse over thumbnails in the Filmstrip they look fine in the Navigator preview but when I select one, it also looks fine as it is 'loading' but quickly 'shifts' to dull, bland when finished (again only in Develop Module). I've read a TechNote from Adobe stating ~'... the Library and Develop Modules use different color profiles...'?? in Preferences (LR) I have selected <PSD,ProPhoto RGB, and 16/bit> and in Color Settings... (PS CS3) I have a Working space as (RGB) - ProPhoto RGB and in Color Management Policies have RGB set to Off. My long winded question is this: I this normal and/or should I set my Preferences to sRGB (in LR for PS CS3)? Anybody have the same issues? P.S. I've had to close LR and then restart LR to have this 'problem' go away (no shifting in Develop). Thanks

Big A, Thanks for replying. Just to let you know, I went into Preferences (LR) and changed my settings: PSD, sRGB, and 8/bit and also changed PS CS3 Color Settings... :RGB-Working Space to sRGB and left RGB-Color Management Policies to Off (w/ Profile Mismatches: checked for Ask When Opening) just to help remind me when I'm working w/ RAW files.
Seems to have settled the issue of different 'views' from Library to Develop Modules. Anyways it seems to make sense seeing how Ps and Lr are supposed to work together 'behind the scenes'. There must be an order of things concerning profiles/spaces (what is effective in one app stays effect in the other or maybe LR have 'authority' over Ps due to its 'design'?? Thanks for the help Antonio

Problem exporting .mov file

I'm trying to export a :30 second sequence using quicktime conversion to a .mov file. I use the default settings with the H.264 codec and uncompressed 16 bit audio. (I've also tried a few other settings with Sorenson and Sorenson 3) The same thing happens everytime. The export takes forever (about 20 minutes) then stops when the progress bar gets to about 79%. A general error comes up. On some occasions, I have also gotten a notice that says my startup disk is close to full. This is confusing because all my drives have at least 10gb of space available on them.
It was suggested in another thread that this could be a result of a corrupt media or render file. If so, how does one determine that this is the cause? It was also said that bad RAM might be to blame.
Any help would be appreciated.

Hmm...
I wouldn't jump right into upgrading as a fix at this point, since your program shouldn't have any trouble exporting a simple Quicktime, and the upgrade to Final Cut Studio from FCP 3 is $799 USD. That isn't full price, but still may be a bit steep if you've chosen to keep using FCP 3 for so long. Although I will say that subsequent versions include many improvements that you might actually appreciate so keep it in mind.
Have you tried exporting using Quicktime Conversion from any other projects with any other clips? That would also be a good idea, to narrow down the problem. Did you try exporting a Quicktime Movie using Current Settings? I realize that may not be adequate for your final intention, but it would help the troubleshooting as well.
I once had a problem exporting a clip from FCP and after trying everything, I recaptured the clip and it ended up working. There were no visible glitches or skips in the video to indicate that the clip itself would have been corrupt, but turns out it was. So if you can recapture, since it's only a 60-second clip, maybe give that a whirl.
You should also trash your FCP prefs (search for com.apple.FinalCutPro.plist on your sytem drive and delete that file), repair your permissions (in Disk Utility), and restart.
Post back,
Joni

Exporting .mov file stretching out photos

I exported an h.264 mov file (from FCP06 sequence) of a wedding video that included still photos from the photographers and video from the video camera shot 4:3. The timeline looked fine but after using compressor to make the mov file, the photos appear stretched out. I guess this is a pixel thing. When I burn it to a DVD will it somehow fix itself? How should I import the photos into the timeline so that they will export at 4:3 looking correctly proportioned?

I am able to export one as a mpeg-4, but when I open the 2nd file, the export option is greyed out and I'm not able to export at all.
Not sure if you are outputting file directly from iPhoto or trying to convert an iPhoto shlideshow in QT at this point. If the former, then this would normally happen only when some other action is pending -- e.g., a modal box is already open. If the latter, then I have no idea and would likely need to see the source file causing problems.
The second file is larger than the first, but I'm not aware of any size restrictions. Are there?
Also don't believe current system has any such restrictions. Have personally worked with movies as long as 300 minutes and/or dozens of GBs in source length.
If not, what else should I be doing (I'm currently regenerating the 2nd .mov file to make sure that it wasn't corrupted, but it does play fine in Qtime).
Sounds like a good plan of action. If the same problem crops up, try creating a slide show using a sub-set of the photos. If problem continues and you are using a 2-stage (iPhoto to QT) process, try to post the sub-set to Internet so it can be evaluated.

Exporting .mov file lacks component

Hello,
I've exported a quicktime document out of this flash file
before, but now, after I tweaked it, it says a required component
cannot be found and it won't export the .mov file.
Any clues as to why it would work before and not now? The
changes I made all have graphics that exist in the library and now
they're grouped together in a tween where every instance is the
same. I'm confounded.

Try this question on the Final Cut pro forum and give full details of your computer, drives and exactly what format and specifications you're exporting to.

Adobe Premiere Elements 10 cant export mov files to QT h.264: export failure

Hello,
I edited my project in Adobe Premiere Elements 10 and want to color correct it in Davinci Resolve Lite. I tried to export my mov files (shot on 60 D 1920x1080 25 fps) to QT h.264, so I can import them in Davinci. I have the same Problem when I want to export to uncompressed YUF 8bit.
The pc says something like: Failure during creating the file. Cant open or create the export file.
Is it a problem of the progamm? Is it impossible to export it in that codec ? Should I use another export codec ?
Greets Stefan

Hello,
Sry I didnt find any Premiere Elements in my selection, next time I post it directly here.
Im using a windows hp 7 64 bit, Adobe premiere elements 10, last version of Quick time and running an account with admin privilegs. I also opened the programm with admin power, just to see if anything happens, but still the same.
My camera films in 1920 x 1080 25p, so I guess its proogressive. For the audio I dont care if its 5.1 or mono, because my microphone is a mono microphone.
I made some pictures of my settings, sry all in german:
[IMG]http://imageshack.us/a/img163/6105/rr3l.jpg[/IMG]
[IMG]http://imageshack.us/a/img839/9284/nser.jpg[/IMG]
[IMG]http://imageshack.us/a/img707/6420/0krg.jpg[/IMG]
Greets Machun

After exporting, movie file is nowhere to be found.

Similar Messages

Maybe you are looking for