After exporting on FCP, quicktime video freezes with perfect audio.

First off, this is my first video I've exported with FCP.
I made the video, edited and everything with no problem. When I exported, however, a 10 second clip would turn every color of the rainbow and flash, but the audio was perfect.
After researching a little bit I used compressor and it somewhat solved my problem. It went from colors, to freezing. Again the audio is fine but the video freezes for the duration of the clip.
I'm lost at this point.
Thanks!

Without any information regarding original material codec, seqence settings (codec) and output format (codec), it's just generally useless guesswork.
x

Similar Messages

Using time remapping w/AE CS4 to freeze time/video freezes but not audio

Ok I do alot of editing of sports. One thing I like to do is freeze the moment when a special play is about to happen, highlight the player (via masking), then resume play. I had no problem with this in CS3. Now when I use the same workflow in CS4 the video freezes but the audio doesn't. So when I play it back I see the video freeze BUT the audio is still playing...hence now my audio is not synced up with the video. Didn't do this in CS3. My workflow: from PP -rightclick clip- replace w/ AE comp- AE loads my clip in a comp- I enable time remapping- extend the duration of the comp by 5 sec- find the point I want to freeze-set a key frame-copy key frame to origninal position- now I have a 2 second freeze between 2 keyframes. When I check the comp in PP the video freezes where I want it to but the audio keeps playing during the freeze....even after render. Thoughts?

Hi,
I'm also having the same problem with CS4 version. I'm using Mpeg4 file shot on my canon 60d and it's freezing the video in places and continuing the sound. The whole clip is just over 2 mins and I don't have any effects at all.
Does anyone know how to solve this please???
Cheers!
Shan

Does version 12 support producing video clip with AMR audio codec?

From some documents i used as reference to proceude some videos for my phone Premiere Elements 8 can produce video clips with AMR audio codec. I bought today the Premiere elements 12 but I can not find a way to set AMR audio codec for my video clip. Only AAC audio codec seems available. Is it possible to add AMR codec to 12 version?

Neurona17
Adobe typically supports only current version, and, if you purchased from it, is strict on "within 30 days of purchase": for money back on that current version purchase. I do not believe such a thing as a "change the license for other earlier release such as 8 or 9" exists at Adobe. But, you could ask. If you wish to purchase one of those earlier versions that supports AMR export, you might still find some online.
Is the before import conversion of AMR to WAV a viable alternative?
You wrote
Unfortunately so far I have not been able to generate any useful video clip for my system with this 12 version.
Is this in regard to the AMR requirement or to any video without the AMR audio?
Online I have seen that there is a download for the AMR audio codec. Does your system now show that you have such a codec installed on your computer. If not, I am not sure if download of this codec would place it in the Premiere Elements Publish+Share export settings choices, similar to import of some .avi video codecs. (Sometimes 3rd party codecs can create problem, so proceed with caution if you pursue that AMR audio codec idea.
Please update us on your progress when you get a chance.
Thanks.
ATR

ITunes / Quicktime Video Problems With Windows VISTA

I took up Windows Vista as soon as it was available and initially had no problems with iTunes. Then later, video clips (those purchased from iTunes and those I had converted myself) started stuttering / freezing and eventually crashing iTunes and finally I lost audio as well.
Ayyway to cut a long story short, I have uninstalled / re-installed Vista now about eight times for problems with installing drivers for USB devices (I've finally solved all these problems). After the last install the first program I installed was iTunes, tried video and it worked flawlessly. Then, each time I added a hardware device or program I would restart Vista and retry iTunes video.
The first item I added was a USB thumb drive (as I had on all previous occasions to take advantage of Vista's 'Ready Boost'). The thumb drive is a 'Sony 2GB micro vault tiny', and meets the transfer speed requirements for 'Ready Boost', as soon as I had set the drive up for 'Ready Boost' I started having the same problems with iTunes video and Quicktime.
Removed the thumb drive, restarted iTunes and had flawless video playback again. Have tried this over and over with the same result.
So my question is, has anyone else had video playback problems with iTunes / Vista and found similar problems. Trying to tie down whether this is a compatability problem with 'Ready Boost' or the thumb drive used. I have also tried a Sandisk Titanium 2GB with the same result.
I am not sure exactly how 'Ready Boost' works, I thought it added memory that was used to cache page files to the thumb drive instead of to the HDD making a faster seek /access time? Which should make things faster. Another article I read today was talking about 'Ready Boost' being an affordable extension to RAM, in this case I could understand the problem as I would think the access to a USB 2.0 thumbdrive would be slower than that to RAM.
Any help appreciated, but I guess my bottom line is anytime I want to watch video on iTunes, I just pull the USB thumb drive .
PC Pentium 4 Other OS Windows Vista Home Premium

I have the same stuttering video issues with iTunes and Vista. While I have used a thumb drive to transfer files (not Sony) I have not yet messed with Ready boost. I have seen several others complain about the video problem, perhaps they will chime in as well. Unfortunately, your solution doesn't work for me. I pretty much ignore iTunes, waiting for the next version (only god knows when it will be released).
I do have an external firewire drive connected, I'll disconnect later today and see if that has any affect.

Quicktime videos freeze then resume playback

I am experiencing a problem when Quicktime plays videos. The videos freeze for a few seconds, then resuming play.
I have a Dell Inspiron 6000 with Windows XP.
I began experiencing this problem 3 days ago when I updated my software to iTunes 9.0, until then everything worked fine.
Since then, I have repaied iTunes, Quicktime, uninstalled and reinstalled all the software; nothing has helped to improve this problem.
If anyone can help me any, it would be greatly appreciated.

While in Quicktime, click "Edit" > Preferences > Quicktime Preferences. Then click the "Streaming" tab and make an adjustment at the bottom in the "Instant-On" area so there's more of a delay.

Video freeze with Fast User Switching

I can't seem to find anything on this specific topic in the forums, but it's plagued me pretty much since I got the i7 iMac a year ago. The problem is this: when I have more than one account logged in via Fast User Switching, the video will freeze on me. Details:
* by video I mean not the display as a whole, but any video content that is playing -- YouTube, iChat video, etc.
* only the video freezes. Audio keeps playing.
* if I close the other user account, video will resume its normal functioning.
* if I constantly move the window in which the video is playing, it will keep playing.
* if I switch away from the window and return, the video will play again for a brief second.
Those last 2 I find especially puzzling, and they lead me to believe that somehow the computer or the video card somehow is "forgetting" that it needs to redraw the video.
I brought this issue up to a very friendly and helpful Apple rep who suggested zapping the PRAM, which did help for a couple of days but even a restart will do the trick for a while.
Anybody else seen this issue? Any solutions?

Same here. Not specific to 10.7.x, had it in 10.5 and 10.6 as well. The problem is made worse when also using Screen Sharing. All video is stalled (audio plays on). Sometimes the video continues when the mouse is moved. The video also continues when the system volume is changed using the keyboard.
And with all video I mean really all video. Even transitions in the login screen pause until I press the volume keys.
Usually there is no problem with one specific user, and the stalls can usually be fixed by logging that user out, as if that user somehow "owns" the video of the Mac.
Very annoying, and I do hope someone has a solution.
Any specific stuff the other me too's here have installed? I've got Flash Player, Click2Flash, Perian, SizzlingKeys, Flip4Mac for instance.

Itunes Videos freezing with windows 7!

I just got a brand new dell studio last week; i installed itunes 9 with the 64bit and for the first few days it worked just fine and now I will be watching a movie on itunes and my computer will freeze and go black, requiring me to do a manual shut down because i can no longer move my cursor or click anything. I've heard other problems with windows 7 and itunes. When i insert a regular DVD into windows media it works just fine. So far my computer only freezes with my itunes videos but who knows next week it could be my music too!
HELP!

I had the same issue for windows 7. Right click on the iTunes setup file and run as administrator, it works.

White screen in Avid Meridian after export from FCP 6?

After exporting a sequence as 10 bit uncompressed NTSC (using AJA Kona II card) on FCP Ver. 6.06, I imported the file into my Avid Symphony (Meridian).
When I tried to play the file, I could only see a white screen. Audio plays fine.
I have searched Apple, AJA (Kona card) and Avid websites, but can't seem to find a codec or update that addresses this problem.
Any suggestions?

Ahhh...I think the big issue is that you are running that Avid on a PC. So what you need to do is convert the file to the Avid Meridian QT codec, and then bring it over. This means that you need to download that Avid codecs and install those on your Mac.
And there will be a gamma shift...no way around that. You'll have to correct for that on the Avid.

Video freezing with Itunes version 7.0.1

I downloaded the newest version of Itunes. I downloaded the free episode of Battlestar Galactica the story so far. The sound is fine but the video freezes. In other words its only showing still photos of the video. Seasons one and two of BSG sometimes freezes as well but again the sound is fine. I recently subscribed to a Nasa video podcast. It plays fine with the audio as well as the video. I have a Compaq EVO D300 Minitower. It has Windows XP Home Edition Version 2002 Service Pack 2. I have 512 MB Ram Memory. I tried to update my video card but could not find one on the Compaq/HP website. Can anyone help.
Thanks

More info now the audio sometimes stops as well with new stuff from version 7.0.1

Quicktime video vanishes with Firefox 4.0

I just updated my web browser to Firefox 4.0, and suddenly the embedded Quicktime video in my iWeb-created website has become totally unpredictable. Sometimes it's there, sometimes not. Mostly it's not. And when it's not, the spot where the video should be is totally blank. Not even the big Quicktime "Q." If you click on the blank space a big dotted rectangle appears.
The video is fine on every other browser I've tried: Safari, Chrome, I.E., and the Firefox version I was using before. I've wondered if it's a missing plug-in, but I'm not getting prompted for anything.
Any ideas?

The QT movie opened promptly for me in Firefox 4.0. The fact that it's intermittent for you with FF indicates that it's a connection issue and not an iWeb issue. For some reason not all of the files are being loaded by FF at those times. (The server is probably being run by an Ohio State graduate )
OT
Go Blue!
Note: using Quicktime for you slide presentation will exclude all those users from the dark side who don't have Quicktime installed on their PCs. You might look into a java based method for the presentation. There are lots of them out there. With the free Jalbum you have over 100 themes/skins to choose from.
Message was edited by: Old Toad

Videos freezing with yahoo page

videos freezing on yahoo page,after the firefox 4.0 upgrade.The videos running normal on msn page.

Hi Harini,
1. The system is ready for user mapping
2. user mapping is done correctly using the uid,passwd mapping.It is not asking for any user name password.its just showing the the yahoo home page but if I check the URL by right click->properties it is showing the actual URL http://in.yahoo.com/?p=us
3.The value in the URL Template I have given is like this
URL Template : https://login.yahoo.com/config/login_verify2?&.src=ym
URL Template Fragment for user mapping : login=<MappedUser>&passwd=<MappedPassword>
Have some doubt what will be the actual value in mapped user and mapped password will it be my yahoo user name and password or the name of the text field of the yahoo page in the source of the page?
Regards
Indranil

Video freezes during playback--audio is fine

I recently recorded a 3 minute broadcast using VC3 on a new Dell (Vista) laptop. I was able to review the broadcast and everything seemed fine. After publishing, however, the final video now freezes at 25 seconds. The audio continues to play, but the video does not. I opened the VC project and the same thing now happens there (freezes at 25 seconds). There are no transitions or changes at the 25 second mark in the project, so I'm not sure why it happened. I've tried to publish again as a different file type, but nothing changed. I have done a few other projects that were the same length or longer on this same computer and have not had any issues. I'm looking for a way to fix this problem without redoing the project. Is there a way to? Or is there a way to get the raw video feed from wherever it is on the computer and drop it into another project?
Thanks!

Thanks Randy,
Yes, I have captured in DV, down-convert from HDV. The image, for the most part, plays on the external monitor, but occasionally freezes...while it continues to play on the computer monitor. this problem is getting worse over time. I've been trough all the usual suspects from overlapping windows & timelines through trashing FCP preferences and repairing permissions on the hard drive. I've even reinstalled my OSX Tiger and Final Cut (twice actually as at one point I lost my boot drive & had to replace it) I have two different decks, and it doesn't matter which deck the firewire goes to, the monitor freeze happens with either one. ( I have no problems capturing, by the way) Since this is the second HDV project I have had on this equipment and did not have this problem on the other project, I am beginning to wonder if this might be a hardware problem.
Any ideas??

Video clips have perfect audio but no picture in Quicktime, VLC has perfect audio and jittery picture... How is this fixed?

I have a Canon 550D and a class 6 Sandisk extreme 3 card which I have been taking great photos and film clips.
Yesterday I captured some content and when I put it into my macbook pro, the images were clear as per usual however the videos only appeared to play the audio in aperture 3 and also in quicktime.
I then tried the videos in VLC and it had perfect audio once again but with picture this time. This picture quality seemed to freeze.be jittery.
Has anyone had/fixed this before..?? The content I have captured was of a once off opportunity for work...

hi,
thanks. i already have that. wmp 9 for the mac. (i forgot to post that in my list.)
every darn thing i have does the same thing.
audio but not video
i clicked on "open in rosetta" for flip4mac and now it does open once more but the same...no video.
i don't understand why nothing is working.
do i have to upgrade fliprmac and buy it to make it work? i am not going to do that tho.
this is really frustrating.
i'm curious - suppose i send it to you - unless i can put it here somehow - and see if you can
open and listen and watch?
i tried it on my ibook and the same thing happened.
Message was edited by: itsmesunny

Video sound with no audio clip

I want to be able to listen to the audio in my video clip. When I export it to any movie, it plays the movie silently. When I add an audio track it plays the video along with the music, but anything said in the video is silent. Is there a setting where I can change this? Thank you so much for you help.
Mike

I have the same camera Canon FS100 (it was on sale)
It took quite a while, but I found that "Super" would create a workable file for use with Premiere Pro CS4.
Super v2009.bld.35
www.erightsoft.com/super.html
There are possibly many ways to do it.
One I found that worked well was to save it as
mpg... Mpeg-II... mp2
use FFmpeg
720:480
16:9
29.97
48000
256
you may also try
http://www.squared5.com/svideo/mpeg-streamclip-win.html
I looked at it - but I havn't tryed it yet.
And P Pro CS4 was then able to edit the file.
The issue is that the audio is AC-3 Dolby Digital
and so far I can't get it to work with Ppro?
en.wikipedia.org/wiki/Ac3
PS if anyone knows of a better way to save the output files please let us know.
I tried 100s of combinations to find one that worked.
I don't claim that it is the best.
I was just very happy to be able to use the software I played big bucks for and the camera I (already had)
If I had bunches of extra money and an old tux laying around I would buy a better camera.....
But for now it is the best I can afford.
And I am enjoying learning the Adobe CS4 collection of software.
It gives me something to do while I look for work.
Good luck with your camera,
Steve
Your out of work Flight Instructor just
Trying to make a few fun stearman flying videos
and a few dvds to hand out the the kids baseball teams

Videos converting with no audio

I have several files (quick time files) in itunes that when converted to ipod they loose the audio. As quick time files they run with audio in itues but after converted to ipod the video runs without audio. How can I convert them without loosing the audio. And they are not MPEG1 Muxed" or "MPEG2 Muxed

I have several files (quick time files) in itunes
that when converted to ipod they loose the audio. As
quick time files they run with audio in itues but
after converted to ipod the video runs without audio.
How can I convert them without loosing the audio.
And they are not MPEG1 Muxed" or "MPEG2 Muxed
u have to use a converter not the itunes one cas that one has bugs or somthing i use Jodix Free Ipod Video Converter search that with google or yahoo maybe ull get some results it works great for me hope it does the same for u btw its called mp4 format

After exporting on FCP, quicktime video freezes with perfect audio.

Similar Messages

Maybe you are looking for