After exporting to idvd last half of project does not have sound

I'm about ready to pull my hair out.
I determined my movie was too long for 1 dvd, so I split it up into 2 projects. Part 2 works fine, sound and video. Part 1, get about 1/2 way through and suddenly no sound. I've done all the obvious trouble shooting already. I used export to idvd this last time, and now i'm trying export to quick time and see if my sound is wonky in quick time (when it's done exporting) Is there anything else that could be causing this? The sound is FINE in imovie. Of course I have a time issue, 23 copies by Sunday! yikes! Can anyone advise????

The quick time file looked HORRID! Exported again to iDVD selected Best Quality under project info.. and HORRAY! it worked, no glitches. I have a stack of bad DVD's... now if I could only figure out why it worked this time and not the others...

Similar Messages

  • ?after a 4 week absence from I Mac 10.7.4 it does not have sound anymore, does not recognize my voice nor can it read any stick. what can I do?

    after a 4 week absence from I Mac 10.7.4 it does not have sound anymore, does not recognize my voice nor can it read any stick. what can I do?

    Mac computers: Progress bar appears after waking from sleep
    slow wake from sleep OS x 10.9.4

  • PRC: Generate Draft Revenue for a Single Project shows error(The project does not have a baseline revenue)

    Project Num                    Project Name                        Revenue Project Invoice     Rejection Reason                             
                                                                       Accrual Invoice Method     
                                                                       Method  Method  at Top Task
    16                             Contract Project                    Event   Event   No          The project does not have a baseline revenue
    Regards,
    Harvir

    Hi Harvir,
    Please check:
    PRC: Generate Draft Revenue for a Single Project Showing Reject Reason As the Project Does Not Have a Baseline Revenue
    Thanks &
    Best Regards,

  • PIXELATED IMAGES AFTER EXPORT TO IDVD

    Help! I'm confused and frustrated. I have imported 65 images from iPhoto to iMovie and added titles, music and a few transitions. The movie plays fine in iMovie full screen on my 20 inch iMac. After exporting to Idvd project a number of the images (most) are pixelated and even more confusing (at least to me), when I return to the original iMovie (which was great before the export) now those images are pixelated also. WHAT IS GOING ON? , how can I avoid this? Hope I am in the right forum.
    imac g5   Mac OS X (10.3.9)  

    Bengt: Right now I'm jubilant. Tried your methodology, and results were beautiful. Good burn and no JAGGIES. Then made a disc image and tried a burn from that. Great. If this continues I owe you a "GREAT BIG THANK YOU!!" I have been struggling with this problem far to long. Next I want to try adding some more complex transitions and perhaps some Ken Burns and hoping to see the same SMOOTHE lines. Too bad more people don't know about this for I see others posting about pixelation.
    For now, I remain grateful.
    imac g5   Mac OS X (10.3.9)  

  • When sharing iMovie11 project  with iDVD inmediately message 'the project could not be prepared for publishing because an error occurred (Error in user parameter list).  Finalize issue?

    When sharing my 60 minutes iMovie project with iDVD inmediately message 'The project could not be prepared for publishing because an error  occurred (Error in user parameter list)' appears. Could not find the user parameter list, so I've no more info about this error.
    Option File - Finalize Project gives inmediately the same errormessage.
    Also option Share - Media Browser - Large/Medium/Mobile give the same errormessage.
    Please advise, thank you!

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

  • Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?

    Whenever i try sharing my imovie trailer with idvd it says "The project could not be prepared for publishing because an error occurred. (Error in user parameter list)". How am i supposed to burn it to a dvd then?

    Additional info: trying to write to internal disk (268 GB Free out of 499 GB)
    Please advise, alko80

  • Project does not advance after taking quiz.

    After taking a 3 question quiz I set the project to jump to a specific page when the Continue button is pressed.  The project does not advance to the chosen slide.

    I'm having the same issue. The project (swf file) keeps freezing on the second quiz question. if i start the project on another slide, it still freezes on the second question slide presented.
    I have cleared the cashe, tried setting it to a survey question. tried rebuilding the question slide.
    I have no clue why it wont play thru.
    Any suggestions? I need to get this project published today.
    There are 6 quiz questions in the project total.
    Thanks,
    Stephanie

  • Microsoft Project does not open; Even after enabling the project from Options - Addins - enable the Disabled file in the Manage options.

    Dear experts
    I have two issues for which I seek help.
    1. My Microsoft project does not open, hangs, no matter how many times I disable the Options -> Addins -> enable the Disabled file in the Manage options.
    I also copied the file and tried. It has no previous versions. Any advice
    I plan to open this in 2013 version of Project later but I really need your advice.
    Regards

    Hi Protocoder,
    If I understand well, this is a 2013 mpp file that you want to open with Ms Project 2013? Then you get Project hang? Are you using Project Server as well or just the standalone MS Project version?
    Can you reproduce this issue with other files or just this file?
    Your file might be corrupted, try this
    method, export the file as XML and saving it back as mpp.
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • IMovie 10.02 does not have program memory while exporting movie

    Hi there,
    I would appreciate any help to learn what iMovie does while exporting a movie I just made.
    I am using the latest iMovie under OS Maverick and I have just created a project, added soundtracks and wanted to export the project
    into a movie. The project is 31 minutes long and trying to export it as a file in HD quality, iTunes breakes off after a while and shows
    the error message, that my system does not have any program memory anymore and that I have to shut down all used programs in order to
    avoid problems with my computer.
    Did anybody have had this kind of problem before? With the previous version, I made so many movies, partly almost an hour long and never had
    any trouble in doing so. I could export as HD movie or into Quick Time but now the game has changed and I do not know exactly what I did wrong.
    Why would there be not enough recources even though I upgraded my RAM to 8 GB.
    Cheers
    Zuse
    PS
    Sorry this might sound a bit funny, but my program language is German so I translated the German error message

    Hello Zuse,
    Thanks for your answer...
    I also walked the forums about this and no solution. I contacted yesterday assitance call and the person does not see more where the problem is. I tried to repair the disk and permissions thereof, restart in safe mode and reinstall iMovie 10 but to no avail. He even advised me to reinstall Maverick or as you say, to use the old version of iMovie 9. I hope Apple will soon respond to this issue and provide an update because it is not normal at all.
    Best regards!
    Phil

  • How can I export to a .sfw file? it does not give me the option in FILE EXPORT.

    how can I export to a .sfw file? it does not give me the option in FILE > EXPORT. I have Flash installed and everthing.

    The feature to export SWF files directly from After Effects has been removed. It never worked at all well.
    To create SWF files, use Flash Professional.
    If you want to play a movie that you've created in After Effects in a SWF container, then export your composition using Adobe Media Encoder in H.264 format and then link or embed that movie into a SWF file in Flash Professional.

  • When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

    When I try to share a project to theater I get the message Your Theater could not be opened.There was a problem reading your movies from iCloud and the project does not share. Can anyone help?

    Set up iMovie Theater and iCloud
    In order to take full advantage of the capabilities of iMovie Theater, you must be signed in to iCloud. If you are signed in to iCloud, movies and trailers shared to iMovie Theater are automatically uploaded to iCloud. You can also turn off automatic uploading, and upload just the movies and trailers you want, or delete individual movies and trailers from iCloud. For more information about the Theater, see iMovie Theater overview.
    If you sign out of your iCloud account on your Mac, all iCloud movies disappear from the Theater, but they are not deleted; the movies reappear when you sign in again. If you ever run out of space in iCloud, an alert icon appears in the top-right corner of your movie, indicating that you can’t upload new movies. For more information, click the icon. After you upgrade your iCloud storage or clear space, your movies automatically appear in iCloud again.
    Hide
    Set up automatic iCloud uploading
    Choose Apple menu > System Preferences, and click iCloud.
    Make sure you’re signed in, and then select the Documents & Data checkbox.
    Click the Options button next to Documents & Data.
    Make sure the iMovie checkbox is selected.
    In iMovie, choose iMovie > Preferences.
    Select the “Automatically upload content to iCloud” checkbox.
    To turn off automatic uploading, deselect the checkbox.

  • Error after update : "Method 'Upgrade' does not have an implementation"

    Hello,
    After installing the last Updates for my SharePoint Farm 2013, I ran into an issue. When I try to connect to the site, I get this error :
    Method 'Upgrade' in type 'Microsoft.SharePoint.WorkflowServices.WorkflowServiceApplicationProxy'
    from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
    PublicKeyToken=71e9bce111e9429c' does not have an implementation.
    And there is a lot of strange behaviours within my farm. I cannot run a psconfig, the services FIMService
    and FIMSynchronizationService cannot start, I can see the category "Office 365" in Central Administration but I have a SharePoint Server 2013, not online or any 365 thing... And I cannot uninstall previous SharePoint Updates...
    Any idea ?
    Thanks in advance for your answer.
    Mike

    Hi Mike,
    If you are using SharePoint 2013 Server edition, please re-download the
    SharePoint Server 2013 SP1(KB2880552) instead of SharePoint Foundation version, then install it on the server and check results again, here is another post with similar
    issue you can take a look.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/ee5c9cee-2b8c-473a-adc6-05d74aac9511/error-after-update-installation-method-method-upgrade-in-type-?forum=sharepointadmin
    http://blogs.technet.com/b/stefan_gossner/archive/2014/04/22/sp1-for-sharepoint-2013-has-been-rereleased.aspx
    http://thesharepointfarm.com/2014/05/ms14-022-known-issues/
    Thanks
    Daniel Yang
    TechNet Community Support

  • How do you burn a dvd from imovie if computer does not have idvd anymore?

    How can I burn a dvd from imovie if this computer does not have idvd? is there anything in mountain lion that will allow this simple task to be completed.'
    When i try to finish a project in iphoto it wont even do that...can anyone help?

    Buy iDVD.
    Yes, there are other programs that will put a movie on a DVD.   I have tried most of the other substitutes including Toast, Burn, DVD Creator, Wondershare, and others.  None of them come anywhere near the ease-of-use and power of iDVD. IDVD is specifically designed to work with iMovie.
    http://www.apple.com/findouthow/movies/idvd.html
    With iDVD you can easily and quickly create DVDs with menus and graphics almost on the level of what Hollywood can do.
    IDVD is easy to get. It is available on disk as part of iLife 11.
    IDVD is a wonderful piece of software and well worth the low cost of $40.  (works with all Mac OS 10.5 and newer.)
    http://www.amazon.com/Apple-MC623Z-A-iLife-VERSION/dp/B003XKRZES/ref=sr_1_1?ie=U
    http://dealmac.com/lw/artclick.html?1,527850,1872219

  • The current project does not contain an EJB Module to deploy

    Im trying to deploy the VSM sample app to a external oc4j.
    After creating the deploy profiles and trying to deploy to the connection i created to the oc4j the deploy window says the project "**The current project does not contain an EJB Module to deploy" and start to deploy the war file.
    have i made something wrong?
    thnks.

    We have no idea what the "VSM sample app" is. The problem is probably
    in the sample app. The warning message just says that the EJB profile
    has nothing to deploy, because the project doesn't have any EJBs.

  • After installing iOS6 on my iPhone 4, iTunes does not recognize my phone as a device.

    After installing iOS6 on my iPhone 4, iTunes does not recognize my phone as a device. It no longer appears in the left devices column. I keep getting an error pop-up from Windows telling me "MobileDeviceService stopped working and was closed."
    Yes, I have the latest version of iTunes for Windows. And when I go into Preferences, it still lists my iPhone as a device back-up, and the date of the last back-up.
    What can I do to fix this?

    If your iTunes is the latest version, restart your computer and reboot your iPhone. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPhone restart. See if that fixes your problem.

Maybe you are looking for

  • Importing albums in iPhoto on MacBook

    My old iBook died but I'd saved my iPhoto library to an external Lacie. I imported the pictures easily enough but the album information didn't come across from the hard drive and the pictures were all in original format (e.g. unrotated, etc) so I wan

  • [ANNOUNCEMENT] Hetman 1.0 Early Access  - powerful Java file manager

    SoftAge has launched the Early Access Program for Hetman 1.0. Handy Java desktop application Hetman is a dual-panel file manager for the huge Java community. Hetman is powered by Fusion framework (based on SWT), it has a decent responsive cross platf

  • Using Profit Center Accounting for balance sheet reporting on various plant

    Hi Gurus, Can anyone please tell me the steps I need to take to use PCA for balance sheet reporting on various plants under one company code. If there is a better way then please let me know. Thanks

  • Creating a .bat file to compile .java files

    Hi, I am trying to create a .bat file to compile java files. I have created the .bat in the same folder as teh .java file I am trying to compile. I know the path is set to the proper folder to find the compiler, but I keep getting an error saying the

  • Print the whole site with one button

    Hi All This may sound like a stupid question, but I wonder if someone can help me, is there a way of having a button that would print the whole site - rather than separate html pages. - without having/using a pdf file . Regards Lorna17