After factory reset atv1will constantly restart after connect network.

After a factory reset i can choose for the language setting at that moment the setup will connect the network, by processing the settings for wireless or cabled LAN.
But the ATV will constantly flash back the menu, the only way to solve this, by disconnect the network. When connected the ATV can be pinged from a other station in the network. How to solve this issue? Is this a hardware problem, how can i update the firmware if i can't connect the network?

I finally got it working after resetting the router several times.

Similar Messages

HT1695 On the setup after a factory reset I get to choose my network. I have three full bars and my wifi is checked. It just stays on that screen and won't go any further

I'm trying to setup my ipad after a factory reset. I get to the screen that says choose network. I choose mine and it puts a checkmate next to it. I have all the bars for wifi and that's all that happens. It just stays on that screen. It won't highlight the next button so I can go on. Any help?

Turn off router for 30 seconds and on again; try connecting again when router is ready.

I lost my wifi after doing a factory reset, how do I restore the network adapter drivers

It would helpful if you mention the model number of you computer.Also mention the operating system shipped with your computer. Have you restored ther same operating system shipped wiht your computer?

It's an Acer Aspire M1641 desktop, with Windows Vista home premium O/S. The O/S has not been changed.Thanks.

Factory reset on every restart (z 10 stl 100-2)

Plss tell me what is the issue with my device. It gets reset every time I restart it. All internal device data contacts and apps are erased. Plss help!

Hi and Welcome to the Community!
Here is a KB that discusses that error:Article ID: KB36747 All data is deleted following a manual restart of the BlackBerry 10 smartphone and a blue LED is displayed during boot upHopefully it contains something useful! There also are multiple existing threads on this site that discuss that exact error...your review of those might prove useful, and a search of this site, using the error message, error code, or symptom, should reveal all applicable existing threads to you.
Good luck and let us know!

How do you factory reset a iphone 4s if it dont work in the setting

how do you factory reset a iphone 4s if it dont work in the setting

vic17santos wrote:
how do you factory reset a iphone 4s
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode.
Note on Recovery Mode.
You may need to try this More than Once... Be sure to Follow ALL the Steps...

How do I recover files from HP Connected Drive that no longer show up after a factory reset?

I am trying to recover files that were once visible in HP Connected Drive, after completing a factory reset. The files that I need are no longer showing up. How can I get them back?

Try using a data recovery product such as the ones listed here. Don't erase the drive or write anything else to it until the files are recovered or you choose not to recover them.
(117246)

Cannot connect to TC, even after factory reset

I bought a 1TB TC from apple in 08/2008. I don't recall if it was a refurb or not. It worked fine for 4.5 years with more or less no problems. About a month or two ago the Wi-Fi stopped working. I could connect to the SSID, but occasionally could not get an internet connection without cycling the power of the modem and TC. Finally, the cycling trick stopped working, and while I could connect to the TC I couldn't get internet. I switched to the WiFi capabilties that my Comcast modem had (as I didn't have time to address the issue then). I've finally gotten around to trying to fix it and could not find the TC via WiFi. I attempted a hard reset, but holding the reset button (while under power) did not make the yellow light flash, even after 30 seconds. I then performed a factory reset by holding the reset button while plugging in the TC. The light flashed, indicating the factory reset occurred.
After the factory reset I still cannot:
-Find the TC via WiFi
     I attempted using both my previous SSID and searching for the default "Apple Network XXXXXX" signal. No dice.
-Find the TC via Ethernet
     I attempted to connect my MBP directly to the ethernet port (<--->) on the TC but the red light remains on the Ethernet in Network Settings (Status: Cable Unplugged. Either the cable for Ethernet is not plugged in or the device at the other end is not responding). I verified the cable works by connecting the ethernet cable to the cable modem and instantly getting the green "connected" light and an internet connection.
-Find the TC via Airport Utility
     The TC did not appear, even when plugged in directly with the ethernet cable.
I'm not sure if this is a firmware issue or what. The lights turn on the front and in the LEDs above the ethernet jacks in the back during power/start up but is otherwise unresponsive. I cannot attempt a firmware update as I cannot connect to the TC by WiFi/Ethernet, let alone through the Airport utilitiy.
I'm not sure if this is relevant or helpful but the TC is also making a ticking/hissing slightly faster than once a second as if the drive is being accessed.
Can anyone help!?! I have quite a drive to an apple store and I'm sure what they would charge to mail in and fix it would be excessive.
Many karma points await anyone that can help!!! Thanks in advance for your time!

The power supply is dead.
Solid amber could also be a dead hard disk.
Apple will not fix it and do not supply parts for anyone else to fix them.
It is really no longer economic to repair unless you can DIY. And even then if the hard disk is gone then it really is a waste.. just buy a replacement.
See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
I have given several methods.. some rough but very cheap to repair the TC.
Otherwise it is just time to buy a new one.. or IMHO a Gen4 is an excellent buy.. second hand or from your local apple refurbish store.

Droid RAZR not restarting after factory reset

Hi,
I just switched from my old Droid 4 to my sister's old Droid RAZR, which she had no problems with when she last used it. After switching my number over and such, I decided to do a factory reset to wipe off all her information. However, now it won't restart and it's been over an hour since I did the factory reset. It just sits at the eye-looking page and doesn't go any further. Any suggestions on what to do?

Hi ejackson18,
I'm sorry to hear that your reset is stuck. I definitely want to get the phone working for you again! Are you able to try the Alternate Methode instead?
Keep us posted!
RuthW_VZW
Follow us on twitter @VZWSupport

8961 IP Phone constantly requests CTLSEP MAC .tlv after factory reset

I have an 8961 IP phone running "sip8961.9-0-0-70dev". When the config is erased (All) the phone resets but constantly asks the TFTP server for CTLSEP<MAC>.tlv. There is no CTL file, nor has there ever been security configured.
How can I stop the phone asking for CTLSEP<MAC>.tlv and get on with downloading its config/firmware upgrade?
Thank-you
-Rob.

This is part of the Communications Manager Security By Default feature. After the phone boots, obtains an IP address, and the address of a TFTP server, the first files it will ask for are the CTL and the ITL file. This is used to determine if the phone requests a signed configuration file or not.. This is an example of a signed configuration file..Security is enabled by default on cucm 8.0 and above.

After I factory reset my Iphone 4s, I can't finish the step where it ask for WIFI Network, I guess it don't detect WIFI and can't connect to iTunes also. What should I do?

I can't finish the step after I factory reset my iphone 4s because I can't get thru with the CHOOSE YOUR WIFI NETWORK

If you can't see your WiFi then is your router broadcasting the SSID or do you not get to that point?

AirPort Express constantly restarting after firmware upgrade

Hello,
I have an AirPort Express that extends a wireless network created by a Time Capsule. They are identified by AirPort Utility 5.6 as "AirPort Express 802.11n" and "Time Capsule 802.11n (4th Generation)". The AirPort Express has worked properly for several years, but after updating the firmware to 7.6.1 a few weeks ago, it regurlaly hangs for a while, but works fine again for hours or days in between (so it isn't broken). The Time Capsule was upgraded to 7.6.1 at the same time and works without problems.
When the AirPort Express hangs, it's restarting itself all the time: the status light is solid amber for about a minute (starting up), then flashes two times amber (connecting), becomes green (ok) for half a second, and then solid amber again (restarting). This cyclic restarting can last for hours. Very strange behavior... During such cyclic restarting, it is on so shortly that it never shows up in AirPort Utility and it is impossible to connect and read the log file.
A factory default reset is possible and allows to configure it with AirPort Utility. But after reconfiguring, the AirPort Express entrers the cyclic restarting again. The same happens when configuring to join (instead of extend) the wireless network. After trying to factory-reset and reconfigure several times and finally letting it in its cyclic restarting for a while, it suddenly comes back on and will work again for several hours or even days (until the problem comes back again).
My next try will be to revert to firmware 7.6 (AirPort Utility 5.6 > Base Station > Upoad Firmware...). Any other ideas around?
P.S.
I didn't find several (advanced) functionalities of the original AirPort Utility (5.6) in the new version (6.x): for example "Upload Firmware", "Logs and Statistics", "Use dynamic global hostname", "Disconnect disk users", etc. I hope 5.6 will be available and maintained for a while...

At the next hang of the AirPort Express and after a factory reset, I tried to revert to firmware 7.6 (AirPort Utility 5.6 > Base Station > Upoad Firmware… > select firmware from a list of available versions). After a while, it failed with the following error message:
An error occurred while updating the firmware.
Make sure your Apple Wi-Fi base station is plugged in and in range of your computer or connected via Ethernet and try again. (-1)
The Airport express was hanging again. After another factory reset, the menu item Upload Firmware… didn't show available firmware versions anymore, but asked to open a file in a finder pane. Is this expected behaviour?
The event log of the Time Capsule shows the following entries during the cyclic restarting of the AirPort Express (which doesn't give me a clue about the cause of my problem):
Jun 20 19:07:19
Severity:5
Associated with station 00:1f:f3:f4:bd:13
Jun 20 19:07:23
Severity:5
Deauthenticating with station 00:1f:f3:f4:bd:13 (reserved 2).
Jun 20 19:07:23
Severity:5
Disassociated with station 00:1f:f3:f4:bd:13
Jun 20 19:08:24
Severity:5
Associated with station 00:1f:f3:f4:bd:13
Jun 20 19:08:28
Severity:5
Deauthenticating with station 00:1f:f3:f4:bd:13 (reserved 2).
Jun 20 19:08:28
Severity:5
Disassociated with station 00:1f:f3:f4:bd:13
Jun 20 19:09:27
Severity:5
Associated with station 00:1f:f3:f4:bd:13
Jun 20 19:09:31
Severity:5
Deauthenticating with station 00:1f:f3:f4:bd:13 (reserved 2).
Jun 20 19:09:32
Severity:5
Disassociated with station 00:1f:f3:f4:bd:13
Jun 20 19:10:30
Severity:5
Associated with station 00:1f:f3:f4:bd:13
Jun 20 19:10:34
Severity:5
Deauthenticating with station 00:1f:f3:f4:bd:13 (reserved 2).
Jun 20 19:10:35
Severity:5
Disassociated with station 00:1f:f3:f4:bd:13
Does anybody have a suggestion what to try next? Any idea would be greatly appreciated!

HT3728 When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I redo the factory reset.

The Time Capsule is not providing a wireless connection.
When I reconnect my Time Capsule after a factory reset, the Airport Utility shows ther message"Unexpected error. Try again." I also get this if I cancel the Airport Utility app and restart it. I performed the factory reset again, restarted the Airport Utility and received the same error. What are the steps to debug and fix the wireless problem?
My Time Capsule is connected to my FIOS router and to my Mac Mini. I am still able to connect to the Internet from the Mini via ethernet. It seems that the Time Capsule acts as a bridge for the ethernet connections between Internet to FIOS, FIOS to Time Capsule, and Time Capsule to Mac Mini.

Which model TC is this? The A1xxx number from the base please.
Try the setup in full isolation from the network.. so unplug the TC from the network.. and turn off wireless in the mini.. so you have mini--ethernet--lan port TC.. and nothing else.
Do the factory reset.
Now check if TC comes up in airport utility..
If it fails, turn on ipv6 local link.. if you are using 6.3 utility this could be necessary.
Still fails, try loading the v5 utility.. you will need to plug the computer back into the FIOS to get internet. Then depending on OS.. Lion according to your profile.. you can just down the utility.. ML takes more steps.
See below.
Do you have an iphone or ipad.. download the airport utility app and use those for the setup.. that can sometimes work better.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
For screen shots see this post.
https://discussions.apple.com/thread/4668746?tstart=0

Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

Why does iPad 3 4G constantly restart after 8.3 update only when docked with iMac?

That question is impossible to answer without more information. What troubleshooting steps have you performed? Did you try using another cable? Did you try using another USB port on the Mac? Did you reboot the Mac and reset the iPad? Have you tired restoring the iPad?
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Use iTunes to restore your iPhone, iPad, or iPod to factory settings - Apple Support

Even after complete factory reset in a last ditch effort, my macbook is still awful. Why? Please help.

Aright, I'm really hoping I can get some help here. This macbook is the most expensive thing that I own.
So, I start up my macbook pro 13inch running macvericks a few days go and for some reason the fans are going full last and it's terribly sluggish. I dug around a bit and realized spotlight was indexing. I let it finish, then restarted my computer later that day. Then, as soon as it started back up this time the fans were going full speed again. I take care of my macbook, and I've never let it get close to overheating, then only thing that I do on it is browse the web, write, and record music using garageband. I was worried, so I looked at activity monitor and kernel_task was running full speed. I looked forever on the internet for a solution and found some useful tips about editing plists that solved my cpu problem. However, my fans still went full speed after I gave them some time to transtion, with a reset and all. So, at this point and I'm frustrated with merely the noise, I look around for fan control software and none of it stifled the raging monstrosity that has become my fan. My logic at this point? Back up everything and do a full wipe of the hard drive and reinstall mavericks. So I did. Here I am with a blank macbook pro that is now just as slow as it was and the fans are still going full speed. I can't believe I spent a years worth of saving to just have it suddenly combust on me like this. I hate to whine, but please help me. Now, the activity monitor shows levels of up to 80% cpu usage and no explanation on top of that. It's still incredibly loud and not hot at all. It's difficult to type this to you guys because my computer doesn't want to catch up. I read some stuff about involuntary indexing, I'll let the macbook run for a while today and see if anything starts to change. You're my lost hope guys. I called apple support but they wanted 19 dollars just to see if they could fix it or not, I didn't have the money to pay them now and I won't until school starts in a week, wherein I will deseprately need a fully functional macbook, the one that I paid for in August 2012 with literally all my savings.
*also, before I factory reset the macbook I did an smc and pram reset, I also took out the batter from inside the machine for 30 seconds.

Hi,
I am having the exact same problem with my macbook pro, I was just wondering if you ever got a solution for your problem? Its been persisting for 3 days and i literally just wiped the system and am in the middle of reinstalling mavericks as we speak (i too resorted to a desktop) It was only after that i saw this thread, and now i regret wiping the system knowing it probably wont work.. but however, fresh start and all that jazz. My warranty ended just last week so im pretty disappointed with the timing, and i cant afford to keep up the warranty another year. If you could give me a solution or some guidance that would be great!
Thanks!
Hannah

Blank Screen after factory reset 7911 phone

Hello guys,
I had a weird issue on an 7911 ip phone. It was connected to my network and on the display of the phone was saying "ethernet disconnected".
What i did was a soft and a hard reset using 123456789*0# and then 3497672850*# following the guidelines of a conversation in the forum
https://supportforums.cisco.com/thread/2166581
After the factory reset the device has a blank screen (I left it for more than an hour connected on the network bearing in mind that some processes might be loading in the background and the firmware will load at some point..that didn't happen) and it is unable to receive an ip address ("show ip dhcp bindings", shows nothing related to the mac address of that device).
To eliminate the possibility that the problem might be on the network card of the phone, i've factory reset a working phone using the above described procedure.
I had the same problem with that phone too.
Are there are any log commands that i can use to further investigate my issue? (I can't see any logs using "terminal monitor"command)
I am using call manager express 4.3.0 on a cisco 2800 router.

Dragan,
I tried what you suggested with no luck.
What i noted is that, when i plug the power adapter on the phone and connect the ethernet cable on the switch port of the phone (the other end goes to a d-link small switch) the light on the small d-link switch doesn't come up. However if i plug the ethernet cable on the pc port of the phone the light goes green. I checked it with two phones that i've factory reset and it is the same problem.
What i understood from this, is that the pc is unable to retrieve an ip from the dhcp server and the necessary option 150 to locate the tftp server and retrieve the necessary firmware.
Gordon, due to the above mentioned problem i can't proceed with wireshark since i don't have network connectivity between the phone and my workstation.
Guys, do you have any alternatives that i can give a try?
Thanks a banch!

After factory reset atv1will constantly restart after connect network.

Similar Messages

Maybe you are looking for