After factory reset, cannot build the Recover CDs that "should have been burned"

I get an error in RRMEDIA.
Reading some of the things about uninstalling Client Security and updating Rescue & Recovery, I'm not sure I want to
do that.
I learned today that if I turn off compatibility for the SATA I get the  0x0000007b  after the factory rebuild.
Turn on compatility and the computer "WHEW" comes up.
Should I even worry about making the CDs or just let R&R attempt recover on a 3.2 year old T60?
Thanks for any input.
Carver Smith

The recovery CDs simply make a copy of the recovery partition on your HDD, so it sounds like you may have a couple of unrelated issues.  I'd try to re-load from the recovery partiion and hope for the best!  If it doesn't work, you'll just have to buy a set of recovery CDs.
Keith
Formerly 600E 2645, T30 2366, X31 2673, T40 2373, T41 2379, T42 2373, T42 2379, T60 1952, T61p 8889, T61p 8891
Currently T420 4177-CTO, T430 2347-A54, T430 2349-L64, T430 2347-UN9, T430 2342-CTR, Ideapad K1, H520S 2561-1LU

Similar Messages

  • How can I reinstall the earlier version that should have been replaced by the new version but has been wiped off of my 10.4.11 and left me with only sufari mac

    I attempted to install the new version of Firefox as it would not load my Hotmail account. I clicked 'replace' only to be told the new version could not be installed; I now have no Firefox at all to run on my (10.4.11) Mac Book Pro.
    Can anyone let me know if I can reload my previous version of Firefox to use for internet purposes?
    Thanks.

    Current Firefox versions require an Intel processor, which you have, '''''<u>and</u>''''' OSX 10.6, 10.7 or 10.8, you have OSX 10.4.11.
    *OSX 10.5 and lower version numbers are no longer supported by Apple, you no longer receive stability or security updates from Apple, and using those old versions expose you to significant security risks online.
    *Additionally, more and more software will not work with the old versions of OSX.
    *See - https://support.mozilla.org/en-US/kb/firefox-no-longer-works-mac-os-10-4-or-powerpc
    *See - https://www.mozilla.org/en-US/firefox/20.0/system-requirements/
    One suggestion in the first article above is to continue using Firefox 3.6.28 (no longer supported) and could expose you to known security risks online while using Firefox 3.6.28. <u>All Firefox versions that will run under OSX 10.5 and lower make you vulnerable to attack by hackers when you are online.</u>
    Your best option:
    #upgrade OSX to 10.6 or 10.7 or 10.8
    #<s>try using TenFourFox, a third-party build of Firefox for older OSX versions ('''''may not take away the associated risk of using the older OSX versions''''')
    #*See - http://www.floodgap.com/software/tenfourfox/
    #*Plugins not supported (extensions are supported), and there are options on this page as to how to install replacements for Adobe Flash and Quicktime, if you use those Plugins - https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported</s>

  • The best glitch that should have been a feature on BB10

    What do you see that is common on these screen shots, that you would not normally see while switching screens, switching apps, etc..
    Yes, Date and Carrier info. I was a glitch, and was stuck in my screen. Until I went into settings by a full swipe from top, then it never came back.
    I wish there was an option to enable that to be on all the time.. along with name of the SSID connected to.

    I guess BlackBerry figures as long as you're the owner of the phone and you see power bars in the top right, you probably already know what carrier you're with.  As for the date, I have my calendar icon on my front page and it always shows the current date.
    I'm just makin' conversation here.  Your points are valid ones.
    Cheers. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • HT1386 After syncing my iphone I found that all of my notes were erased from the phone.  Is there any way to retrieve the notes now that they have been erased?

    After syncing my iphone I found that all of my notes were erased from the phone.  Is there any way to retrieve the notes now that they have been erased?  I had some very important notes that I have to be able to find.  Anyone know how?

    I think those contacts still in iphone database. So you can back up you iphone with itunes to get iphone database off your iphone. Then access the SQLite batabse.
    http://support.apple.com/kb/HT1766
    All data included with the backup is stored in a SQLite database format with the data within various folders not easily accessible.There are some 3rd party utilities that provide for extracting select data from an iPhone's backup and iphone database such as this one.
    http://www.datarecoveryforiphone.com/

  • HT1349 I am locked out of the email account that i have been asked to go to to varify my icloud account what can I do

    I am locked out of the email account that i have been asked to go to to varify my icloud account what can I do

    Contact the email service provider.

  • How do I get DVD for the Windows 7 that should have come with my new laptop please

    This is my first message here so please bear with me. I have just bought a new Lenovo Essentials B570 laptop which has come with Windows 7 pre-installed. Previously I used to buy Dell laptops which used to come with OS Re-installation DVDs which check to see if they are being installed on the hardware it was bought for but would allow us to install the OS on a new hard disk if the original one crashed. Now Lenovo seems to be using a very complicated method to allow buyer's to re-install the OS - they are expected to retain the same hard disk - but what happens is the hard disk crashes and one wants to install the OS along with all the drivers? The Dell DVD allows me to do precisely that. Can I create a similar disk to install the OS on a new hard disk as and when I want/need it please? I have created two sets of DVDs using the OKR software - one set using the 'system presently on disk' and another set for 'resetting to factory defaults' - but from what I have read on these forums these OKR disks would not work if I put a completely new hard disk. So at least if I can get hold of the correct version of the Windows DVD - as I have paid for the license I would be very grateful. Thank you.
    Solved!
    Go to Solution.

    yigit wrote:
    http://forum.lenovo.com/t5/Lenovo-3000-and-Essential/How-to-create-quot-Factory-Default-Recovery-Dis...
    Thanks for the quick reply.
    But to me this looks more like a OKR solution and I have already created these Factory Reset discs.
    Will these discs work if I have installed a completely new hard disk in the dive? Because that is what I would need to do in the rare event that I have a complete hard disk failure.
    What is confusing is the fact that on these forums, I find many messages which indicate that the OKR solution would work only with the original hard disk and it would not work with a completely new hard disk and also that the OKR itself would not be able to change partitions on the hard disk - even when it is the original hard disk. To me this means any disks that are created using the OKR would be useless when the original hard disk has undergone severe change or a completely new hard disk is in its place. Correct me if I am wrong. (In fact I am hoping that I am wrong in that assumption.)
    My laptop has a 750GB hard disk and it has Windows 7, 64bit. I actually want to make this into a dual boot machine with KUbuntu. What is stopping me attempting that is the fact that C drive has bigger partition and D drive is a smaller partition (too small in fact - 30GB these days is practically nothing) and I learn that any modifications I do to drive partitions would render the OKR non functional.
    I can live without this simplistic one key rescue operation if I have recourse to the Windows 7 DVD and that is why I asked the question.

  • I can not fint the texture files, which should have been installed with the CS6 and CC? why?

    I installed Photoshop CS6 a while back. Later on I discovered that the texture files where missing, or not included? Later I installed Photoshop CC, to see if the texture files were included here. But no, it was not. As far as I concern, I know that the texture files are included, and should have been installed, but they were not. Someone have any idea why?

    In Photoshop CC 2014, Filter Gallery opens the dialog below, and "Texture" is the last folder.

  • How do I rid of the daily apps that I have been on that appear at the bottom of the screen pages...they used to shake and you could delete them...how do you do it now?

    How do I get rid of the apps that I have been on ...I used to double click the on/off button, they would shake and I could delete them...How do I do it now that I am on the new OS7?

    You still double-click the home button to open the multitasking bar, but with iOS 7 you now drag or swipe the app 'screen' up and off the top of the screen :

  • Anyone else had trouble getting RID of Mt Lion? I was shocked to learn that I could NOT run some of my software on it and attempted (with online help) to reinstall SNow Leopard. My computer is now in the hospital! I should have been told beforehand.

    I 'upgraded' to Mt Lion over the weekend. It seemed very slow, and sluggish. Within a day I realized also that my Reunion program would not work,
    my Quicken would not work, and who knows what else. I kept getting alerts saying that I could not use any PC programs. So, I decided to go back to Snow Leopard - I spent two and a half hours on the phone with two very capable people, then was told that I'd have to take it to an Apple Store. I DO have
    extended warranty but a lot of good THAT does!  Besides, our nearest store is 160 miles away! So, I took it to our local authorized dealer. It is currently
    being worked on, and the minimum will be $189!  Fortunately, Time Machine was being backed up by my external hard drive.  But, I just received a
    call and they can't make my password work to get in!  Somehow that has changed back to an old one I don't remember! 
    MY COMPLAINT:  When speaking with a rep about the feasibility of downloading Mt Lion, not ONCE did anyone tell me that I 'might' have these
    problems.  I NEVER would have upgraded! Now I just want my computer restored to USABLE -

    What an unfortunate story.   I hope you will quickly get things back to normal.  
    To be fair though, there has been quite a lot written about the effects of mountain Lion and the loss of Rosetta, as one example.   I am wondering just how much research you did before buying.
    But on the brighter side, you can wipe Mountain Lion and reinstall Snow Leopard with not too much trouble.   It would have been much worse had you bought a new machine with M.L. pre-installed and then found your programs wouldn't work.
    Message was edited by: seventy one

  • My iPhone cable gave me a warning this morning that it was  not certified to work with this phone, but it is the cable that came with the phone and that i have been using for a year and a half.  Why?

    i plugged in my 18 month old iPhone to charge it, using the cable that came with it and that I have used regularly all along. I got a warning on my phone screen saying the cable is not certified and may not work properly with my iPhone.  Why?

    If you updated iPhone to iOS7, it now checks for real Apple Lightning Cable. Your cable may not be Apple, or someone swapped another cable with yours. Make sure the cable end is clean, take a clean dry toothbrush and carefully clean charging port on the iPhone.

  • HT4623 When I access iTunes, it syncs my iPhone to the mac pc, but after syncing, I cannot find the drop down that says "devices" so that I can check details about backups.  How do I get to the window that says "devices"?  thank you!

    When my iphone5 is connected to my mac pc by the usb cable, the phone syncs with my mac pc.  However, after it is finished syncing, I do not know how to access the window in itunes that has the option "devices".  I obviously, am a newbie and would appreciate any help.  Thank you!

    When connected your phone should be listed on the top right. Click it without clicking the eject icon.
    - or -
    You can show the side bar where it will be listed under devices:
    Mac: OPTION+COMMAND+S
    PC: CTRL+S

  • Regret a publish to the public when it should have been private beta

    I accidently published a beta of a new app to the public. How can I use that reserved beta name for a new private beta submission?
    I unpublished and deleted the app as soon as I noticed the mistake. But I can't find a way to release the reserved app name. Neither can I find a way to switch from public to beta for the app that was accidently subitted public.
    eloekset

    Hi, sad isn't it!
    Is this a PPC iMac, or an Inel iMac?
    If PPC...
    TenFourFox is the most up to date browser for our PPCs, they even have G4 & G5 optimized versions...
    http://www.floodgap.com/software/tenfourfox/
    In fact, it will run on Imtel Macs upto 10.6.8 also.

  • Cannot connect to TC, even after factory reset

    I bought a 1TB TC from apple in 08/2008. I don't recall if it was a refurb or not. It worked fine for 4.5 years with more or less no problems. About a month or two ago the Wi-Fi stopped working. I could connect to the SSID, but occasionally could not get an internet connection without cycling the power of the modem and TC. Finally, the cycling trick stopped working, and while I could connect to the TC I couldn't get internet. I switched to the WiFi capabilties that my Comcast modem had (as I didn't have time to address the issue then). I've finally gotten around to trying to fix it and could not find the TC via WiFi. I attempted a hard reset, but holding the reset button (while under power) did not make the yellow light flash, even after 30 seconds. I then performed a factory reset by holding the reset button while plugging in the TC. The light flashed, indicating the factory reset occurred.
    After the factory reset I still cannot:
    -Find the TC via WiFi
         I attempted using both my previous SSID and searching for the default "Apple Network XXXXXX" signal. No dice.
    -Find the TC via Ethernet
         I attempted to connect my MBP directly to the ethernet port (<--->) on the TC but the red light remains on the Ethernet in Network Settings (Status: Cable Unplugged. Either the cable for Ethernet is not plugged in or the device at the other end is not responding). I verified the cable works by connecting the ethernet cable to the cable modem and instantly getting the green "connected" light and an internet connection.
    -Find the TC via Airport Utility
         The TC did not appear, even when plugged in directly with the ethernet cable.
    I'm not sure if this is a firmware issue or what. The lights turn on the front and in the LEDs above the ethernet jacks in the back during power/start up but is otherwise unresponsive. I cannot attempt a firmware update as I cannot connect to the TC by WiFi/Ethernet, let alone through the Airport utilitiy.
    I'm not sure if this is relevant or helpful but the TC is also making a ticking/hissing slightly faster than once a second as if the drive is being accessed.
    Can anyone help!?! I have quite a drive to an apple store and I'm sure what they would charge to mail in and fix it would be excessive.
    Many karma points await anyone that can help!!! Thanks in advance for your time!

    The power supply is dead.
    Solid amber could also be a dead hard disk.
    Apple will not fix it and do not supply parts for anyone else to fix them.
    It is really no longer economic to repair unless you can DIY. And even then if the hard disk is gone then it really is a waste.. just buy a replacement.
    See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    I have given several methods.. some rough but very cheap to repair the TC.
    Otherwise it is just time to buy a new one.. or IMHO a Gen4 is an excellent buy.. second hand or from your local apple refurbish store.

  • Recovering data after factory reset (security issue)

    Hello there,
    Recently a friend of mine asked me how to erase all data on an iPhone ? I pointed to him to "factory reset".
    Now, I see a bunch of websites that show how to recover data after factory reset using their software, not sure if they work as advertised or not.
    What I would like to know is if the user wants the data to be erased and non-recoverable, is this the best option or if there is any other option available in iPhone that can make the data un-recoverable. We want to make sure the data is un-recoverable after factory reset.
    thanks
    Ashish Shah

    unfortunately this doesn't answer my question.
    I do know the option to "erase all content and settings" in iPhone.
    What I want to know is to make sure once done, no one can recover that data back. Since this phone will be sold off to some stranger, we don't want them to have access to the data.
    Here are a few websites from my just preliminary search results that show how to recover data.
    just google "extracting data after factory reset iPhone" and you will see a bunch of websites offering their products to recover. So I want to check if this is so simple, how can we really make sure the data is wiped off clean.
    Ashish Shah

  • After Factory Reset - the dreaded 3F0 message "please install an operating system".

    I have seen numerous threads on the 3F0 message relating to missing HDD/OSes but none seem to match mine.
    I have an (albeit old) HP Envy 13-1050EA,  I decided to completely refresh it and go back to factory reset state.
    The reset completes succesfully, the machine then starts it's setting up the OS (Windows 7 HP).  It reboots a couple of times as expected then suddenly throws the 3F0 message Just after its finished installing drivers.
    I have performed the usual HDD tests - the disk is there, all present and correct.  In fact I have tried it with various HDD and get the same results:
    I can install an OS from OEM (windows 7 and windows 8) without a problem, but ONLY with the recovery disks do I get the 3F0.  But I would like a factory reset with the original Image that I paid for originally - not just the OS (The Linux front etc)
    How do I get the the machine to recognise it has been installing the OS for the past 20 minutes, is HP's recovery faulty in some way? 
    I have two of these machines - identical spec - if I cloned the drive of the working model is it easy enough to change the Windows 7 License Key - are there any other keys that I'd need to be aware of?
    Any help would be gratefully accepted.
    Specs:
    HP Envy 13-1050EA, 5GB, 250GB HDD - Win 7 64 Home Premium - Bios version F.12
    Matt

    Welcome Blue.
    You can clone the drive and change the product key.
    You must make sure that they both have the same version of Windows COA's.
    After you have the cloned drive booted go to START then COMPUTER then SYSTEM PROPERTIES.
    At the bottom of SYSTEM PROPERTIES you will see CHANGE PRODUCT KEY.
    Click on it and put the product key in that is on the bottom of that laptop.
    REO
    HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
    Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
    Microsoft Registered Refurbisher
    Registered Microsoft Partner
    Apple Certified Macintosh Technician Certification in progress.

Maybe you are looking for

  • Can we no longer transfer upgrades between phones?

    Still on my father's account. His line is eligible for an upgrade and I want the GS4 but apparently a customer rep told him in-store that transferring upgrades is no longer available. This is..rather disheartening if true. In VZW's Upgrade Device FAQ

  • ORA-00600: kglgtbo1 and kcfrbd_3

    Hello, I am running into two different ORA-00600 errors performing the same basic Insert statement.  The insert is happening through our Java application. The process copies data from one database to another.  There are clob values involved.  We are

  • Simple ECommerce integration with DWCS3

    Hello folks, Can anyone tell me what's the best way to integrate ECommerce into my website built with DW CS3? Is this software any good: PayPal eCommerce Toolkit 4.5.1 Any suggestions, links to tuitorals or software would be much appreciated!

  • JDev10g: General performance decrease with JClients like Oracle BC Browser

    Hi, I'm observing a significant performance decrease of JClient applications (homegrown and Oracle Business Components Browser)in JDev10g compared against JDev9i (9033)? Can anyone confirm my observation? Just create a default Dept-Emp business compo

  • What is the protocol for the optical drive error?

    What is going on with the iMac optical drive for CD/DVD content.  This ***** - nothing will work and I am trying to install new software onto my iMac for taxes and gaming.  HELP!!!