After Factory Reset: Facing Errror ID 30702/Unable to update BB ID account

History: I was having this issue: http://supportforums.blackberry.com/t5/BlackBerry-App-World-General/quot-Unable-to-Login-to-you-Blac...
and got it resolved via a Factory Reset.
But after a few days of use and rebooted a few times due to installation of apps, I have this new problem:
op up error message: "There is an issue with the current session. Please login to continue. (Error ID: 30702)"
and
When trying to view my BlackBerry ID Account through the "Device", "Unable to update your BlackBerry ID account information.
The only good thing is that I can still access the apps by clicking on the "Apps" icon at once I enter BlackBerry App World.
I have tried these before and the big question is that shuld I retry them? http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=C9E77B998DBA023E9E7A227CD8D46D51?...

Hello ronnieng,
Welcome to the forums.
I would suggest trying the steps listed in the article again.
-SR
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

Data recovery after factory reset

I have seen people write that data recovery was possible after factory reset below the jelly bean OS versions on android but iphone is impossible.
So I wonder what is security technology for data protection on iphone.
Let me know security technology. (data encryption, data fromat algorithm, whatever about data protection)

Follou-up..... reading other questions/answers on this forum seem to indicate I'll have to "cherry pick" specific saved data items from the desktop "Shortcut to System Recovery Files" --- a long process. Is there a quicker way???

Cisco 7941G phones will not boot up after factory reset.

Cisco 7941G phones will not boot up after factory reset.
The following happens.
1. Speaker light lit (Green)
2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
3. Saw Cisco logo with a Java Powered page.
4. The whole thing loops again and again...
I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
Please help.

How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
Sounds like too many devices trying to use TFTP at once.

HT5312 phone activation after factory reset

Will a factory reset require reactivation of phone service with the carrier

Hi, SBtaylor.
The iPhone will require the previously used SIM or a valid activated SIM after factory resetting the device.
Using an iPhone without a wireless service plan
http://support.apple.com/kb/HT3406
Cheers,
Jason H.

Time capsule setting up problem after factory reset

What's the next step after factory reset to set up my time capsule again???
i did factory reset for 4-5 times and i cant use my time capsule to create a network, join an existing network or anything else.
i also tried normal reset but still nothing can be done.
There is always a message at the end " an unexpected error occured. Try again"

Plug the TC into the computer by ethernet..
Make sure the computer has no other network running and nothing else is plugged into the TC.. just TC Lan port to the computer ethernet.
Now press reset and open airport utility.
Generally you will have no issue once it is isolated. Do the setup and then you can disconnect and put it back in the network.
If it doesn't work, is the LED on the TC flashing amber or what??
Is the ethernet port connectivity LED on?

Recovering data after factory reset (security issue)

Hello there,
Recently a friend of mine asked me how to erase all data on an iPhone ? I pointed to him to "factory reset".
Now, I see a bunch of websites that show how to recover data after factory reset using their software, not sure if they work as advertised or not.
What I would like to know is if the user wants the data to be erased and non-recoverable, is this the best option or if there is any other option available in iPhone that can make the data un-recoverable. We want to make sure the data is un-recoverable after factory reset.
thanks
Ashish Shah

unfortunately this doesn't answer my question.
I do know the option to "erase all content and settings" in iPhone.
What I want to know is to make sure once done, no one can recover that data back. Since this phone will be sold off to some stranger, we don't want them to have access to the data.
Here are a few websites from my just preliminary search results that show how to recover data.
just google "extracting data after factory reset iPhone" and you will see a bunch of websites offering their products to recover. So I want to check if this is so simple, how can we really make sure the data is wiped off clean.
Ashish Shah

No audio, after factory reset,flash install,SoundMax & HDA audio drivers won't install

My problems are:
No sound with Youtube or the laptop itself
SoundMax won't install either though I downloaded HDA audio drivers it requested.
Flash download stuffed up my SoundMax after factory reset.
I decided to do a factory reset after Youtube starting slowing down. After reset it (Youtube) kind of worked better
then the audio disappeared from the laptop. The drivers, SoundMax Audio was gone (greyed out).
I downloaded the Audio driver from Lenovo website for my X31 but SoundMax install wouldn't install because it kept saying HDA Audio drivers weren't installed.
I downloaded it from here:
http://support.lenovo.com/en_AU/research/hints-or-tips/detail.page?&DocID=HT072373
So I went to HP site to download HDA audio drivers, then the SoundMax Audio reappeared and I had sound on my computer.
HDA Audio drivers link at HP website (since Lenovo doesn't have it):
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?cc=US&lang=en&swItem...
When I downloaded latest Adobe Flash, the SoundMax Audio disappeared again. So at the moment I have Youtube video without sound (and Firefox keeps telling me to download Flash?)
No sound on IE as well.
Would appreciate your help. Thank you very much.
I'm using:
ThinkPad X31 (2673-QU6)
Based on 2673-N7G
Win XP Pro Service 3 with recent updates
Firefox (latest) with add-ons
Solved!
Go to Solution.

You need to install the modem driver too.
http://support.lenovo.com/en_AU/research/hints-or-tips/detail.page?&DocID=HT072373
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Unable to update blackberry id account information while offline

I have BB 9900.
I have registered for a Blackberry ID.
I have registered on Blackberry World.
I can download apps to my phone when my phone is connected to the computer.
When I try to enter by Blackberry ID on my phone I get the message : Unable to update blackberry ID account information while offline
The Blackberry Internet status is not connected - and I cannot see how to connect it.
If I try to download an app from my phone I get the message : no cached credentials
How do I enter my Blackberry ID on my phone?
Solved!
Go to Solution.

Hi shark_bait
Welcome to BlackBerry Support Forums
You have to Activate BlackBerry Data Plan / BIS on your account, It will allow you to add your BlackBerry ID on your phone and will allow you to use all BlackBerry Service over your Mobile Network . Please call your Carrier or Mobile service provider they can add it on your account.
Click " Like " if you want to Thank someone.
If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

Blank Screen after factory reset 7911 phone

Hello guys,
I had a weird issue on an 7911 ip phone. It was connected to my network and on the display of the phone was saying "ethernet disconnected".
What i did was a soft and a hard reset using 123456789*0# and then 3497672850*# following the guidelines of a conversation in the forum
https://supportforums.cisco.com/thread/2166581
After the factory reset the device has a blank screen (I left it for more than an hour connected on the network bearing in mind that some processes might be loading in the background and the firmware will load at some point..that didn't happen) and it is unable to receive an ip address ("show ip dhcp bindings", shows nothing related to the mac address of that device).
To eliminate the possibility that the problem might be on the network card of the phone, i've factory reset a working phone using the above described procedure.
I had the same problem with that phone too.
Are there are any log commands that i can use to further investigate my issue? (I can't see any logs using "terminal monitor"command)
I am using call manager express 4.3.0 on a cisco 2800 router.

Dragan,
I tried what you suggested with no luck.
What i noted is that, when i plug the power adapter on the phone and connect the ethernet cable on the switch port of the phone (the other end goes to a d-link small switch) the light on the small d-link switch doesn't come up. However if i plug the ethernet cable on the pc port of the phone the light goes green. I checked it with two phones that i've factory reset and it is the same problem.
What i understood from this, is that the pc is unable to retrieve an ip from the dhcp server and the necessary option 150 to locate the tftp server and retrieve the necessary firmware.
Gordon, due to the above mentioned problem i can't proceed with wireshark since i don't have network connectivity between the phone and my workstation.
Guys, do you have any alternatives that i can give a try?
Thanks a banch!

Windows 8.1 update not shown after factory reset

I had the windows 8.1 update shown on my app store but due to some problems i factory reset the laptop. when i opened it after the restore i was unable to find the update on my store. Rather it shows 96 apps to be updated

Hi,
If you want to install Windows 8.1 Update 1, there are two requirements:
•Windows 8.1 is a prerequisite (vs Windows 8 RTM)
•KB2919442 is a pre-requisite update - released in March 2014 – you'll need this before 2919355 will be recognized
http://support.microsoft.com/kb/2919442/en-us
Alex Zhao
TechNet Community Support

After factory reset, can't set up Airport Extreme!

Hello all!
American living in germany here. I am using a PowerBook G4 running OS 10.4.11
I am using an Airport Extreme Station with a Siemens Router. I couldn't get my iphone to work wirelessly via Airport, so I decided to do a factory reset. Now after having done that, my Airport Setup Assistant recognizes my Airport but after clicking continue to proceed, I always get the message that it is unable to find the base station.
I should add that my internet stopped working about two weeks ago. I thought it might be my system software so I reinstalled that on my Mac. Turns out it was my ADSL box so my phone company sent me a new one. I did get my Airport to work with my old settings and the new box....but after this factory reset, my computer can't communicate with it.
Help please....I need to be wireless again! Now I am on the internet via an ethernet cable.
Thanks!

Try connecting to the base station with an ethernet cable for setup purposes.

IPad2 activation issue after factory reset

Hi,
I did a factory reset "Erase all contents and settings" on my iPad 2, but there are issues with activating the iPad. I have tried it connecting with itunes and restore it both with Recovery mode and DFU mode, but still the issue persist.
Please help to resolve this.

iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
If you can’t update or restore your iOS device
http://support.apple.com/kb/ht1808
iPad Stuck in Recovery Mode after Update
http://www.transfer-iphone-recovery.com/ipad-stuck-in-recovery-mode-after-update .html
 Cheers, Tom

Hotspot gone after factory resetting and updating.

After factory resting my iPad 3 the ability to be, use and have the hotspot available to use was gone and not even in the settings menu anymore. How do I get it back?? Can I get it back?? It was updated during the factory reset.

Hello KrAzY1GuTiErRrEz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Unable to locate a Wi-Fi network
Verify that the network is available by tapping Settings > Wi-Fi and choosing from the available networks.Note: It may take a few seconds for the Wi-Fi network name to appear.
Move closer to your wireless router (access point) and attempt to locate the Wi-Fi network.
If you do not see the network you would like to join, you may be attempting to connect to a hidden network. Learn how to join a hidden network.
Supported Wi-Fi configurations vary by iOS device model. Find out which standards your device supports3.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings. Note: This will reset all network settings including:
previously connected Wi-Fi networks and passwords
recently used Bluetooth accessories
VPN and APN settings
Best of luck,
Mario

After Factory Reset - the dreaded 3F0 message "please install an operating system".

I have seen numerous threads on the 3F0 message relating to missing HDD/OSes but none seem to match mine.
I have an (albeit old) HP Envy 13-1050EA, I decided to completely refresh it and go back to factory reset state.
The reset completes succesfully, the machine then starts it's setting up the OS (Windows 7 HP). It reboots a couple of times as expected then suddenly throws the 3F0 message Just after its finished installing drivers.
I have performed the usual HDD tests - the disk is there, all present and correct. In fact I have tried it with various HDD and get the same results:
I can install an OS from OEM (windows 7 and windows 8) without a problem, but ONLY with the recovery disks do I get the 3F0. But I would like a factory reset with the original Image that I paid for originally - not just the OS (The Linux front etc)
How do I get the the machine to recognise it has been installing the OS for the past 20 minutes, is HP's recovery faulty in some way?
I have two of these machines - identical spec - if I cloned the drive of the working model is it easy enough to change the Windows 7 License Key - are there any other keys that I'd need to be aware of?
Any help would be gratefully accepted.
Specs:
HP Envy 13-1050EA, 5GB, 250GB HDD - Win 7 64 Home Premium - Bios version F.12
Matt

Welcome Blue.
You can clone the drive and change the product key.
You must make sure that they both have the same version of Windows COA's.
After you have the cloned drive booted go to START then COMPUTER then SYSTEM PROPERTIES.
At the bottom of SYSTEM PROPERTIES you will see CHANGE PRODUCT KEY.
Click on it and put the product key in that is on the bottom of that laptop.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Problems with a new IP phone 7906 after factory reset

Hi Guys
I am currently having problems with my new IP phone 7906 after doing factory reset and here is a video of it:
http://www.youtube.com/watch?v=vvCLtwIAwVw
I used this command I found on the net:
Hold down
while plugging in the phone and keep holding it until the message waiting indicator (red light) starts blinking. Then
release # and type 123456789*0# in sequence.
I was trying to switch my phone to sip and it also dont want to take tftp setup either.

Tim,
Found this on the net
http://www.cisco.com/en/US/ts/fn/620/fn62949.html
Might be woth giving it a go
6.Pull power on the phone (even if power is PoE).
7.Hold down the # key on the phone.
8.Continue holding down the # key and re-apply power.
9.While still holding the # key wait for the Message Waiting Indicator (MWI) light on the handset to start flashing.
10.Once the MWI light is flashing, release the # key and enter the following sequence exactly on the keypad:
3491672850*#
Once this sequence has been entered on the IP Phone, if all the network criteria above have been met, it should begin its recovery process. This process can take up to 15 minutes to finish. The phone may appear to be doing nothing during this time. However, if the phone does not recover after 20 minutes then it is possible that the recovery is stuck. In this case, re-examine your network and verify that steps 1-4 are in place, then re-issue the factory reset sequence.
* Note: The factory reset sequence is a way for a phone to clear flash and still upload to a valid firmware image. This is facilitated by the termxx.default.loads file, but requires that the image files listed in the termxx.default.loads file are available in TFTP for the phone to download. Open the termxx.default.loads file in any text editor. This loads file is essentially just a packing list showing all the OS and application files the phone needs to function. The files include a cnu, cvm, dsp, app and jar files. Please make sure that these files as listed in the termxx.default.loads file are in TFTP. ("xx" will be either "06" for the CP-7906G model, or "11" for the CP-7911G model.)
Additional Diagnostic Steps:
- Try a hard-coded IP address as a test to see if this resolves the upgrade failures. If it does, and the number of failing IP Phones is relatively few, this procedure may be the most expedient. After the IP Phone upgrades successfully, reconfigure the IP Phone to use DHCP.
- Try putting the phone on a hub or a different switch and see if this helps change the startup timing enough so that the upgrade completes successfully.
Regards
Alex

After Factory Reset: Facing Errror ID 30702/Unable to update BB ID account

Similar Messages

Maybe you are looking for