After firmware 7.6.1 update my airport does not start. No light. Nothing.

Anyone who knows what to do? Throw away? Buy new? Repair?

Have you tried to reset this device?
See this Apple document:
http://support.apple.com/kb/HT3728

Similar Messages

After installing 10.7.2 update the OS does not boot.Any thoughts????

After installing 10.7.2 update the OS does not boot. I tried to recover from recovery hd disk but after 3 attempts I am still not able to download lion! Any thoughts????

Try the Lion Community, and bookmark the notebook community (this is not).
You will probably need to provide others with more information too.
Cloned backup? TimeMachine? using Disk Utilityh to repair Lion from the recovery partition (comnand r on startup)

After a ram upgrade to 8 GB mini does not start, control led is blinking and interval tut....tut is hearing..???, After a ram upgrade to 8 GB mini does not start, control led is blinking and interval tut....tut is hearing..???

Hello,
i tried to change the RAM on my Mac mini 2011 up to 8 GB RAM.
After installing the modules the mini does not start, led blinking and tut......tut....tut.
changhing back to the old modules, same problem.
Who can haelp? THANKS

Hello,
The following table lists the new tones and their meaning:
Tone(s)    Description
1 tone, a 5-second pause, repeat    No RAM installed
3 successive tones, a 5-second pause, 3 successive tones    RAM does not pass data integrity check
1 long tone when holding down the power button    Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
3 long tones, 3 short tones, 3 long tones    Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
http://support.apple.com/kb/HT2538
Try reseating the RAM, or try the old RAM, the new one(s) may be bad or not Mac compatible.

My airport does not start when pligged in

My aipport does not start when plugged in. The light does not come on at all. If there some kind of a reset switch?

With no light at all, unfortunately it is likely that an internal component in the AirPort Express has failed.
The reset switch is next to the audio jack. Try a different AC socket. With the AirPort Express plugged into power, hold in the reset button for 8-10 seconds, then release.
If successful, the AirPort Express will restart to a solid amber light for 30-35 seconds, then begin to slowly blink amber after 40-45 seconds.
If you try the reset a few times with no success, I'm afraid that the AirPort Express has failed and will need to be replaced.

After upgrade to 2.6.28, vmware workstation does not start

After upgrading to the 2.6.28 kernel, vmware does not start. It complains with:
Could not open /dev/vmmon: No such file or directory.
Please make sure that the kernel module `vmmon' is loaded.
I have found that I can run the following command to load the modules:
vmware-modconfig --console --install-all
But after a reboot, the modules aren't loaded again.
Not sure how to get the modules to autoload properly.

You need to go to the wiki under Installing VMware.
Search until you find 2. Start and stop script
Create the script in /etc/rc.d directory and make sure you chmod 755 the file.
Add mkvmdev to the rc.conf file under daemons.
This should now work properly.
I was able to get it working using Vmplayer.

After updating bios laptop does not starts. it starts for 5 sec and goes off repeatedly

today morning i upodated bios from hp website, mp laptop model is hp pavilion dv4 5009tx, bt after updating it is not starting. it starts for 5 seconds and goes off, and this go on happening...
please suggest me what shall i do now.
MY LAPTOP IS IN WARRANTY PERIOD. i bought it this month
This question was solved.
View Solution.

You're very welcome.Happy to hear you are back up and running.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Trouble with 10.6.8 Update - blue scream, does not start the OS when it turns on. Should I stay with the old 10.6.7?

The Disk Utility could not repair the disk neither the repairing installation of the OS X allowed me to start the OS, the blue frozen scream was still appearing. The HD erasing with the Disk Utility was the only choice, than installing the 10.6.7 OS.

I'm not entirely certain of what you've tried here, so some of this may be what you've already tried.
Get an external backup or two, made via the bootable DVD. Recoveries and repairs sometimes fail, and data loss can result.
if Disk Utility is not repairing the disk structures, then you can try an add-on repair tool (which wouldn't be my choice, but some folks try that), or you can create an external backup and reinstall from distribution. Attempting installation on a corrupt (or potentially failing) disk won't usually have desirable results.
After creating the external backup (or two), you can either replace the disk and reinstall, or can attempt to wipe and reinstall with the existing disk using the bootable DVD that came with your system (or a new Snow Leopard DVD from Apple) and particularly the Disk Utility tool that's available via the DVD Utilities menu, and migrate in your old data from the external backup. I'd then download and apply the 10.6.8 Combo Update from Apple; and not the delta update from 10.6.7 (if that's what your Mac DVD has).
The data migration is part of the installation, and will attempt to bring in your existing files and your old environment, passwords and the rest of the settings from the external disk image. (Assuming it's not corrupted.)
If you have reinstalled and have redownloaded and reloaded the combo update, then you likely have some sort of a hardware problem with your MacBook Pro; check with the local Apple Store for repairs, or whoever else you might be using for that. Or replacement, of course.
I'm going to assume that you're using the OS X 10.6 client software that arrived with that MacBook Pro and have not installed and are not running the server version of OS X Server 10.6 (this forum); the initial recovery sequence for this case is basically the same for either, though getting the various services back online after a disk corruption can be more involved. You will need to use the 10.6.8 Server combo update here, though.

After installing the latest iTunes updates, the computer does not recognize the ipad

I updated the software on my iPad and my computer and now my computer will not recognize my iPad. Any suggestions?

I updated the software on my iPad and my computer and now my computer will not recognize my iPad. Any suggestions?

Mozilla updated last night and now crashes on update. It does not start in safe mode.

I run WIndows Vista and have never had a problem with Mozilla before.
This happened two nights ago as well. My IT departmnt does not support Mozilla but last time agreed to install a previous version. Problem solved. They will not help again. Is there a fix for the new version? Or...where can I get the older version?

See this bug report that is attached to the crash report.
*[https://bugzilla.mozilla.org/show_bug.cgi?id=680927 bug 680927] NEW Startup crash in mozcomp.dll with Oracle Enterprise, F5 Networks, Passlogix V-GO, IBM Tivoli Access Manager SSO
''(please do not comment in bug reports)''

After update 7.1.2 Iphoto does not start

After installing the 7.1.2 update, Iphoto does not start anymore. only the Icon bounce in the dock a few times.
Restoring the previous Iphoto.app in the applications folder resolves it and iphoto works O.K.
when i install the 7.1.2 update it again does not start.
Can someone help me with this??
Roland

You should probably post in the iPhoto discussions:
http://discussions.apple.com/category.jspa?categoryID=143

After an update my airport is not working. It won't turn on. Do I need to redownload a driver, and how?

After an update my airport is not working. It won't turn on no matter how many times I press the turn on Wi Fi button. Do I need to redownload a driver, and how?

Hello
Try this
plug a WIERED mouse , start up your imac , hold on mouse buttons for 30-40 second at least by chance cd could be ejected
HTH
Pierre

Airport Ver 7.4.1 will not update firmware. Goes throught the process, reboots with the same firmware version. Power cycled the airport, did not help

Airport Ver 7.4.1 will not update firmware. Goes throught the process, reboots with the same firmware version. Power cycled the airport, did not help.

Please see the answer to your other post.

When updating to ios 7, my airport does not function in my ipad and iphone. No icon appears...I´ve check I´ve got last firmware on aiport utility, and also I´ve restart both devices... thanks for your support..

HI!, When updating to ios 7, my airport does not function in my ipad and iphone. No icon appears ...I´ve check I´ve got last firmware on aiport utility, and also I´ve restart both devices... buth still not working

Restart your AirPort Base Station or other router if that's what you have. Unplug it and allow a moment or two for it to reset before plugging it back in again.
If that does not work, try resetting your network settings: on the iPad and iPhone, tap Settings > Wi-Fi, select your network then "Forget this Network". Select the network again, provide its password, and verify you can connect.
If that does not work, Settings > General > Reset > Reset Network Settings. Select your network again as above.
If that does not work, "hard reset" your AirPort Base Station, assuming you are using one and not some third party product. You will need to reconfigure it using AirPort Utility.

TS3116 After updating, apple TV does not work. A picture is one TV screen which ask to use mini USB.

Hi... I am not sure what generation I have
After updating, I does not start at all, no light signal.
Just picture show to me to use mini USB for Song logo.
How can I do?

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.
(You may already have a micro USB cable if you have a camera or other digital device)

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.

Firefox does not start up after an automatic update. Every time i try to open it, it just prompts the Mozilla Crash Reporter.
''Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.10
BuildID: 20100914125854
CrashTime: 1290192405
EMCheckCompatibility: true
FramePoisonBase: 00000000f0de0000
FramePoisonSize: 65536
InstallTime: 1287124738
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 422
StartupTime: 1290192405
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.10
This report also contains technical information about the state of the application when it crashed.''
Same thing happens when i click restart.
No difference when i run it in Safe mode. And it won't let me create a new profile either. Is there anyway else i can extract my bookmarks? This is driving me crazy!

Did the crash reporter send any crash reports? 
You can see the crash reports in this folder:
"C:\Users\<user>\AppData\Roaming\Mozilla\Firefox\Crash Reports"
See: http://kb.mozillazine.org/Breakpad
See also [[Firefox crashes when you open it]]
Create a new profile as a test to check if your current profile is causing the problems. 
See [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting: Make a new profile]] 
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" 
If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files) 
See http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox 
If that still causes the same problem then do a clean reinstall and remove the Firefox program folder.
* Download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
* Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
* Don't remove personal data when uninstalling.
* It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See:
* http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

After firmware 7.6.1 update my airport does not start. No light. Nothing.

Similar Messages

Maybe you are looking for