After firmware update on E51, phone do not boot

I did a firmware update yesterday to 220.34.37, the update did go successfully, and made the phone not to boot as well.
Can anyone help.

You are entering them wrong. All of those codes need a star (*) at the start before they will work.

Similar Messages

After firmware update to V2.0.03, the web UI dos not look right. (WRT160 V2)

Hi
After firmware update from V2.0.01 to V2.0.03, the web UI dos not look right.
I can't see menus, just version number and the basic setup page.
Router Linksys WRT160 v2.
Allan

Hi
Thanks for the reply.
I't works ok now.
Thanks again.
Allan

Restoring after firmware update - Ways :)

Hi All,
Nowadays we are receiving quite a few complaints that customers are unable to restore the application after updating their firmware. I would like all to discuss to come up with some ways to restore their applications after firmware update.
Before updating firmware
Customer can backup his phone using Nokia PC Suite's Content Copier application.
He can store his Contacts and Messages using Nokia Communication Centre as .csv file or .txt file.
For his Contacts he can sync with pc suite supported sync applications.
Messages he can store in Memory card and he can make a backup of memory card in PC.
If he is using Nokia PC Suite for his Multimedia items he can use Image Store if he is using Nokia PC Suite or Nokia Photos if he is using Nokia OVI Suite.
For Music he can use Nokia Music Manager or Nokia Music.
Once after updating his firmware, if he is unable to restore he can get those from above said applications.
If his calendar entries are not restored(as in case of some of Nokia e 71s and Nokia N 95/95 8 GBs), for God's sake if he has got one more similar device(or device having switch application on phone), he can restore the backup file to another phone having switch application, then he can transfer his data (Contacts, Calenders etc ) to his original phone
Dear Forum members, if you have got any other work around please let me know regarding the same, which will help our customers

Hi,
If you have issue in Nokia PC Suites, [subject to your phone's compatibility with Nokia OVI Suite 2.0.0.10 ],
you can install Nokia OVI Suite 2.0.0.10 and check if you can take backup and restore it later.
Also i would suggest to use USB for taking backup, since it will be faster than Bluetooth. Also you can select one category at one time(say backup contacts alone, then Calendar, then messages etc and so on ....)
Its better to skip memory card backup while backup-ing other Phone data for faster backup. Memory card backup can be done separtely(since it wont be affetcted while updating firmware, users can safely remove memory card while updating firmware)
Nowadays though recent phones has got UDP(User Data Prevention i.e., even if you update your phone's firmware, your data wont get erased ), still it is recommended to backup your phone data.
Hope this could help
I welcome our experts to add more details related to this topic.

Need to do a clean install after firmware update

i have to reinstall os x after the firmware update.
it wont boot up just sticks on the grey logo and sinny thing.... grrrr
will it be ok just to archive and install just leopard instead of tiger, then disc 2(the apps) then leopard??

After installing the recent keyboard firmware update, my iMac G5 refused to boot past the grey apple screen, too. Got the spinning paddle, but multiple hard shutdowns and restarts failed to get it past that point.
I ended up booting the Leopard Install DVD and tried to reboot into my backup, a Superduper clone of the drive. Wouldn't do it -- got the same result.
Used Disk Utility (on the Leopard DVD) to repair the disk/permissions. The only significant repair was this:
permissions differ on "private/var/log/secure.log," should be -rw-------, they are -rw-r-----.
Now, I don't know what that means, but maybe it's relevant.
I rebooted -- and still was unable to get past the grey screen. I tried repairing permissions a second time (and nothing unusual came up) and it still failed to fix the startup problem.
Ultimately, I was forced to do an archive and install of Leopard, which then allowed me to boot successfully.
Really disappointing -- this is the kind of thing I expect Windows users to have to deal with, not us.

Cisco 7941G phones will not boot up after factory reset.

Cisco 7941G phones will not boot up after factory reset.
The following happens.
1. Speaker light lit (Green)
2. Phone displays a firmware upgrade page (see attachment) for a few minutes. (Doesn't seems to be upgrading, but it "saids" upgrading)
3. Saw Cisco logo with a Java Powered page.
4. The whole thing loops again and again...
I think the reason why the phone isn't booting up is because the phone needs to know where to find the configuration/firmware files from a tftp server. I do have a TFTP server, but normally I need to go in settings to change the alternative tftp server, but the thing is that now I can't even press the settings button...
Please help.

How many phones were reset and upgrading at one time? What is the setting of the TFTP Maximum Serving Count (Advanced TFTP Service Parm) on each of the TFTP servers?
Sounds like too many devices trying to use TFTP at once.

Problems after firmware update 52.0.007

Hi,
I got my phone back after the shop fixed a problem and updated the firmware to the latest version 52.0.007.
But now I have following problems:
I can't get the calendar anymore to show up on the homescreen, even after checking the checkbox to do so
The Radio app. is gone
Does anyone has a solution for this?
Iwan

It may sound crazy but sometimes you need to "hard reset" device after firmware update (beware all data erased) by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself). Sometimes UDP = User Data Prersevation feature of 5800XM can carry over corrupt entries when updating.
Happy to have helped forum with a Support Ratio = 42.5

Ovi Maps 3 don´t start after firmware update (6220...

Hello!
a few days ago I installed ovi maps 3 on my nokia 6220c and it works well. Later I updated the firmware from version 03.06 to 05.15.
After firmware update ovi maps don´t start-> "Cannot open application. Install latest version from nokia.com/maps."
But Nokia Map Updater says, there are no updates for my maps.
What´s wrong?
Can I reinstall Ovi Maps 3? Or is it possible to install Ovi Maps 3 new?
thanks

Hello!
The Map Updater said: "there is no update for your phone" ...because maps 3 is already installed.
But in the meantime I have found a solution!!
I downloaded maps 2.0 from the German nokia page and installed it. Later I started Map Updater and could update to Maps 3 and now it works!!!
I think the problem was: I first updated to Maps 3 and later updated the firmware. There was any older version of fixes included in the firmware update, so Maps 3 was damaged...
thanks
sorry for my bad English

Data recovery after firmware update

Hi guys,
does anyone know it it is possible to recover data after firmware update in N8? some data are preserved (videos) and some are lost (photos).
thx.

if you didn't backup them, there is no way to recover them
Greece Nokia X6 RM-559 v40.0.002

I have a Macbook pro 4,1 My Battery would not charge after only 23 cycles. I tried the battery update now my macbook will not boot. it has a kernel panic Unable to find driver for this platform:

Macbook 4,1
Early 2008 15" macbook pro
Running Snow Leopard
the Battery was not working after only 23 cycles
I tried the Battery update and now it will not boot at all
I really do not want to loose my data on the drive
panic message is
Unable to find driver for this platform: "ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Please help

Panic Message
panic(cpu 0 caller 0x000x563ebd) : Unable to find driver for this platform:
"ACPI".\n"@/SourceCache/xnu/xnu-1228/iokit/Kernel/IOPlatformExpert.cpp:1378
Debugger called: <panic>
Backtrace (CPU 0), Format - Frame : Return Address (4 potential args on stack)
(7 lines of hex)
BSD Process name corresponding to current thread: Unkonwn
Kernel version:
Darwin Kernel Version 10.8.0" todays date ; root:xnu-1504.15.3~1/release_I386
I tried to boot from CD can, but i dont want to loose any information.
Tried disk tools
Hardware test
Tried to check if it was memory sticks failing or battery , nothing else plugged in
if i boot holding Apple key and S
I get additional warnings about AppleACPIPlatform and not being able to load Kext

After updating Airport software, Macbook will not boot

I see others have updated with the new Airport software without incident, but not me.
I just ran software update to install the Airport update (hoping it would cure the problem I've had -- and other users as well -- with the connection dropping every 5 minutes with Linksys routers [check the Airport discussion board for much discussion of this]).
After installing, upon restart my Macbook will not boot fully. I get the Apple symbol, then the spinning gear symbol, then a light blue screen and that's it. After a while the fan comes on.
Call it the light blue screen of death.
All was working fine until the update.
I have boot camp and I can boot into Windows.
I have tried removing the battery and resetting the PRAM. No help.
Sigh... Applecare is closed so I cannot call until Friday morning. Anyone have any suggestions of what I can try?
I have my Mac hard disk backed up from a few days ago using Super Duper on a USB drive but I am reluctant to try booting from it as I fear corrupting the drive. Unfortunately I don't have my Mac system CDs with me as I am away from home at the moment.
I just switched to the Mac 6 weeks ago after 3.5 years with a Dell laptop. Never had a single problem like this in all that time. But I still like my Mac.
PD

Well, I spoke too soon. Last night I was able to start up as described above, but this morning when I tried to start it did not even get to the Mac symbol. It just hung at a dark blue screen for several minutes.
Tried restarting with the shift key held down but it would not go into safe mode. Just the dark blue screen.
Resetting PRAM made it startup.
But I'm pretty nervous about this.
So, is there a way in Mac OS X to roll back to the system before the update? In Windows XP this is very simple under System Restore. I have the impression OS X doesn't have this feature and won't until next year with Time Machine.
And I see now I'm not the only user with this problem.
PD

TS1814 i need to update my 3g phone but not progress it's one eror is 1611

i need to update my 3g phone but not progress it's one eror is 1611

Update to what? The 3G you want to update? You have ios3 or 4 on that 3G?
Go to a friend, authorize that pc.
Read this : http://support.apple.com/kb/ht1848
and this : http://support.apple.com/kb/ht2519
Make a backup of your stuff (from the phone. apps/photos/music/blabla). Update your phone. The phone will restore the backup automatically.

I downloaded the ios7 update and my phone will not turn on

I downloaded the ios7 update and my phone will not turn on

1. Charge with AC adaptor for at least 30 minutes
2. Reset the phone (no data loss): press both the homeand power buttons for at least 10 seconds, releasing when the Apple logo appears.

After the update the new version can not determine downloads folder. In the eyes determine folder, however downlload files go in C / documets and settings even

After the update the new version can not determine downloads folder. In the eyes determine folder, however downlload files go in C / documets and settings even though I chose a different folder

hello, there's a general regression in firefox 27 that won't allow files to download directly into a root drive. please try to create a subfolder (like ''D:\Downloads'') and set this as default location for downloads...
also see [https://bugzilla.mozilla.org/show_bug.cgi?id=958899 bug #958899].

3014 error i can't restore ipad after firmware update attempt

3014 error i can't restore ipad after firmware update attempt

See this thread with the same question.
https://discussions.apple.com/thread/5045573?tstart=0

My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

After firmware update on E51, phone do not boot

Similar Messages

Maybe you are looking for