After firmware upgrade problem CP1025NW

I am trying to upgrade the firmware on my CP1025NW printer. I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
After that on the printer is blinking caution sign and I cant print anymore (, I think soft erase old firmware and did not record new one.
Exist some kind of special software for an force firmware update ? or how can I restore it ?

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What operating system are we running the update from?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Firmware upgrade problem CP1025NW

I am trying to upgrade the firmware on my CP1025NW printer. The firmware version on the printer is 20100510 and the version listed on the HP site is 20110826. I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
Any help would be appreciated.
This question was solved.
View Solution.

I am trying to upgrade the firmware on my CP1025NW printer. I downloaded and ran the firmware updater and it runs for a bit and then reports that it "Could not find appropriate firmware file". I have tried running the updater both through a USB connection to the printer and a wireless connection. Both result in the same error.
After that on the printer is blinking caution sign and I cant print anymore (, I think soft erase old firmware and did not record new one.
Exist some kind of special software for an force firmware update ? or how can I restore it ?

T410i SSD user and master password problem after firmware upgrade

Hello.
I have problem with my Corsair Force 3 120GB SSD. After firmware upgrade of SSD my master and user HDD passwords are no longer valid. I'm stuck on BIOS screen and cannot unlock my SSD. After firmware upgrade procedure i got BSOD. Same happened during firmware upgrade on my previous SSD (INTEL X25-M 80GB) but after restart everything was OK. Please help!
Previous firmware version: 1.3
Current firmware version: 1.3.3
SSD connected to another computer shows RAW partition data, but firmware version is 1.3.3 - seems like update was successful.

My X301 Intel x18 got bricked also after a BIOS update then secure erase (was going to sell it). I plugged it to a USB kit and onto a desktop and it was recognised and able to format. But plugging it back to the lenovo it is still a brick. My lucky star there was warranty it was replaced by lenovo.
You may want to try it and extract the data, if it works. And hopefully you can still format it and made it work pluggin back to the lenovo.

PC-Suite sync fails after Firmware upgrade of E65

After firmware upgrade of E65 PC-Suite stops syncing Calendar & Contacts from outlook. No error messages, just "0 entries has been updated".
- PC-Suite updated to 7.0.9.2
- Outlook 2003
- XP Prof.
Any ideas?
Solved!
Go to Solution.

The funny thing is - the notes are synced???? If I restore some old contacts they'll double up in outlook, so I think the problem is, that the sync app doesn't see the outlook contact & calendar folder.
Does somebody has an idea?

Crippled 192.168.1.1 page after firmware upgrade

hi,
i recently upgraded the firmware of my WRT160N V2 to 2.0.03.
but since then when i login i get a crippled page on 192.168.1.1 with not even a menu. so i cant even downgrade. is there something i can do?

It is good to know that the issue is resolved
After firmware upgrade it is always recommended to reset and reconfigure the router and I think that is why you were unable to see the menu on the setup page of your router.

Problems after firmware upgrade to 3.2.10.30101

I have just updated my Iomega Home Network Drive (Cloud Edition) to 3.2.10.30101. How I wish I had looked at this forum before I did! Had the same problem as described elsewhere during the firmware update with never getting past the "Restarting" message.
On start-up now the network drive is not visible until, as suggested by Steven_Lenovo in other related discussions, th e network cable is removed and reconnected. Then it is visible to Windows Explorer and can be "pinged". So no data loss - hurrah!
However, when starting up the EMC Storage Manager interface I cannot get to the Home Screen (I get the "Restarting" Page) unless I wait for around about an hour, and it is only after an hour that the white power light stops flashing.
Pointless submitting a ticket as I have had my network drive too long, but maybe someone can come up with a better fix than re-plugging the network and waiting for an hour every day, and If not, maybe it will make people think twice before installing this upgrade (and earlier ones looking at the number of post-firmware update problems).
Solved!
Go to Solution.

Hello LesleyG franmart,
Is the unit fully booting? It should have a solid white power led once fully booted.
If the unit is not fully booted, the web interface will not fully load and usually show a progress bar or a restart message
If the unit is taking a very long time to boot, but does eventually finish you may want to try the following if you have not already.
Do a hard reset
To do this (This is not Data Destructive):
#1. Press and hold down the reset button for 4 seconds.
#2. Then remove the power cord while still holding the reset button.
#3. Wait about 5 seconds and then plug the power cord back in while still holding the reset button.
#4. Release the reset button after 4 more seconds.
Cycle the unit.
#1 Turn of the device
#2 Disconnect the network cable
#3 Turn on the device
#4 Wait a few minutes then connect the network cable
Connect the device directly to a computer
#1 Turn off the device
#2 Disconnect the network cable from the router and plug it direct into the computer
#3 Turn on the device
#4 Allow for the unit to boot up
#5 Open the command prompt or terminal on your computer
Command Prompt (PC) : Start > "cmd" in the search (no quotes)
Terminal (Mac) : Finder > Applications > Utilities > Terminal
#6 Run the following Command arp -a (there is a space between both)
#7 Look for a Physical Address starting in 00-d0-b8 and there should be an IP Address associated with that.
That IP Address will be where the device is located and you should be able to access the web interface by
typing that IP into your browser.
If the above doesn't help, a full factory reset from the web interface or firmware reimaging may be needed.
Contact the Lenovo Support by phone or chat to request the USB imager (This is data destructive).
Please ensure that you have processed any and all data recovery or backup attempts before you proceed to
this option.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

E66 GPS problem after firmware upgrade to v.500

hi there, sorry but im going crazy with this problem....
id like to know who has a nokia e66, performed the v.500 upgrade and has GPS that doesn't work anymore after doing the upgrade, am i the only one?? what did the new upgrade changed? how to fix this??? i did all i could think of.. format memory card, reset phone, reinstall firmware etc etc. before upgrade it was working like a charm, getting signal fast and all. tried to enable and disable a-positioning, etc etc, resetted, removed battery etc etc.... and i upgraded the firmware with Nokia Ovi Suite for the note.. so the "good" stuff.
gabrio

famous007 wrote:
Hi I am also having the same problem. I upgraded my firmware to version 500.21.009 and my gps is not working. Anyone has a solution to this problem. Will the latest firmware upgrade resolve this issue?
@famous007
Presumably you have this version of Ovi Maps installed upon your E66:http://europe.nokia.com/support/product-support/maps-support/compatibility-and-download#/nokia-e66/
If you go to Menu > Tools > Settings > General > Positioning > Positioning methods - try temporarily disabling all except Integrated GPS, go outside away from tall buildings if feasible launch Ovi Maps and wait 20 - 30 minutes for first positional fix to be established.
Happy to have helped forum with a Support Ratio = 42.5

WRT610N problems after firmware upgrade to 1.00.03.15

I've been using my WRT610N (hardware version 1) for years running firmware version 1.00.00.18.
I always used the 5Ghz SSID from laptops, iPad and iPhone and never bothered about the 2.4Ghz SSID.
Due to more frequent "cannot connect to <5Ghz SSID>" problems recently I decided to upgrade to the latest firmware version (1.00.03.15). Immediately since this firmware upgrade, the 5Ghz SSID is invisible to all devices except (strangely) my iPad. All other devices see only the 2.4 Ghz SSID.
I've tried switching channels etc. but to no avail.
Clearly, the firmware upgrade is the only thing here that changed but I'm at a loss to get the 5Ghz SSID back into action.
Anyone has an idea what's wrong here? The only remedy I can think of is to revert back to the old firmware version but somehow that feels wrong.
Thanks in advance,
Rob V.

rverscho wrote:
I've been using my WRT610N (hardware version 1) for years running firmware version 1.00.00.18.
I always used the 5Ghz SSID from laptops, iPad and iPhone and never bothered about the 2.4Ghz SSID.
Due to more frequent "cannot connect to <5Ghz SSID>" problems recently I decided to upgrade to the latest firmware version (1.00.03.15). Immediately since this firmware upgrade, the 5Ghz SSID is invisible to all devices except (strangely) my iPad. All other devices see only the 2.4 Ghz SSID.
I've tried switching channels etc. but to no avail.
Clearly, the firmware upgrade is the only thing here that changed but I'm at a loss to get the 5Ghz SSID back into action.
Anyone has an idea what's wrong here? The only remedy I can think of is to revert back to the old firmware version but somehow that feels wrong.
Thanks in advance,
Rob V.
Try setting 5GHz network as "Wireless-N only" instead of MIXED. That should help resolve this issue.

No power after firmware upgrade on nomad jukebox zen xtra

I have the nomad jukebox zen xtra 30gig that froze up over a year ago after i tried to install the firmware upgrade. After the unsuccessful attempt, the mp3 player stopped working.... I mean no power at all. I've changed the battery and recharged the battery from an outside source...still no luck. I can't even try any of the suggestions anyone gives on this site because I have no power.Does anyone have this problem? More important, does anyone have this problem and know of a solution?I've already set my pc back to wmp 0, I have the firmware on the desktop waiting. Now all I need is some power on this unit so that i can try some of the suggestions that seems to be working for people. Thank you

I have the same problem too, but my unit is a?Creative Normad Junebox Zen Xtra 40GB. I was trying to find a solution to my problem when I read about your problem. I have pressed the reset button, on / off switch, removed the battery, reinstalled the battery, and nothing seems to work. I was hoping you?might get a solution to this problem, so that I might be able to fix my MP3 player. If I hear of a solution, I will let you know, thanks for sharing. Issue:? While updating the firmware to the Zen Xtra 40 GB, the unit powered down and?has never came on again. There seems to be no real reason why the unit should not power up. The battery and the AC adapter are working correctly. I am very disappointed in Creative...

No contacs after firmware upgrade on N70

Hi
I did a firmware upgrade yesterday on my N70 using NSU. Of course I did a backup using the uptodate Nokia PC suite. After the firmware upgrade I saved the data back to the phone aagin using the Nokia PC suite. Everything looks good except that no contacts are there.
I did the upgrade again just to make sure that everything went OK with the same result.
Can some help or has the same problem?
Firmware V 5.0638.3.0.1 18-09-06 RM-84
PC Windows XP SP2
Nokia PC Suite 6.82.22.0
NSU 1.2.0en
Best regards
Chris

not sure about your PC Suite version but this has been well documented in these forums and I had the same problem and with N70. I think it was mentioned as a PC Suite issue, or a combined PC Suite issue N70 issue with many people reporting it. Anyway nothing you can do but enter your contacts or transfer from another phone

HP Laserjet p1102w - after firmware upgrade / Smart Install update - down to 1MB free memory

Hello,
I have a Laserjet p1102w running off a laptop with Windows 7 64-bit. Just bought the printer this month.
After updating the firmware to 20120814 version and updating the SmartInstall update utility for the 20120814 version as well, I am now down to 1 MB free memory (out of 8MB originally). [Another LJ p1102w updated prior to these updates has 3MB free memory.]
Because I have 1MB free memory, the printer is almost a brick. It can print simple text based pages - however, printing any page with a graphic or a PDF file will cause the printer to take forever to receive data - essentially preventing printing a page on my new printer (while printing the same page instantaneously on my older nonupdated p1102w).
Is there any way to fix this problem, given there is no memory upgrade option? Otherwise, this printer is a brick.
Thank you in advance for a reply - especially from HP.

Hi cyskim,
Did you tried turning the printer off and on after updating the firmware? This should clear its memory, including any memory may affected during the firmware upgrade proccess .
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP 5524 Wireless does not work after firmware upgrade

HI,
I have just purchased an HP5524. After initial problems setting up the WPA key from the printer screen, I connected via USB, found the printer and swapped to wireless successfuly. I then installed the printer software on all my computers at home successfully over wireless.
The printer then needed a firmware upgrade to support eprint (?), which is successfully connected, downloaded the fireware, installed and went through the boot cycles successfully.
However, ever since wireless will not work. Before I return it to the retailer as "not fit for purpose" I thought I would ask the forum. The diagnostics downloaded a tool, which I went through, but this did not offer solutions that I had not already tried.
Thank you

Hi,
Thank you for posting you query,
In order to resolve the issue, please make sure the printer is placed closer to the router and uninstall the printer drivers already installed and then start the instalaltion and seelct teh connection type as wireless network. Then select use USB to configure wireless and when prompted conenct the USB cable and then select the network and enter the encryption key follow the onscreen instructions.
If the issue still persisits, please open the browser and in the address bar enter the IP address of the router and click on GO. This will take you to the router configuration page. On the router page, please click on Wireless Setup and please make sure SSID Broadcast is enabeld and the Wireless Mode is set to Mixed or 802.11 B/G/N and the Wireless Channel is set to 11 and click on Apply. Then try to connect the printer to the network by using the CD.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

Fans And Voume after FirmWare Upgrade

Hey there!
I have two very positive pieces of information, some repeated:
1) The volume of my speakers and "line out" was weak at best prior to the FirmWare upgrade. Now, it is positively explosive! I mean, the volume control works just like I would have expected. Perfect...
2) The fans are coming on more consitantly. I can actually hear them now, which makes me wonder... The temp on the Hard Drive has not gone above 92 since I upgrade the firmware (not that I have noticed however).
Bob

Hi Bob!
What did you use to check the temperature?
I installed the 10.4.6 and the firmware, and now I could cook an egg on the keyboard. I didn't have the heat problem before, now after the updates, I am fried (literally).
Gus

Iomega Storcenter ix4-300d stuck at 95% after firmware upgrade

Hi,
I upgraded my device after I got an email that there is a new firmware:
An update to version 3.2.10.30101 of the Iomega StorCenter ix4-200d software is now available
I installed the update but now it is stuck at 95% after rebooting.
Never had any problem before the firmware upgrade.
Any advice?

Hello BelgianTomas
I recommend that you first power down the unit if the unit has not completed the boot process. Then re-seat all disks and try booting the unit again. Please do not try to access the web interface until the power led is solid white.
Next would be to try moving the internal disks to different bays to see if a different drive order wil allow the unit to boot.
If that does not help, LenovoEMC suppor should be contacted for more advanced options.
LenovoEMC Contact Information is region specific. Please select the correct link then access the Contact Us at the top right:
US and Canada: https://lenovo-na-en.custhelp.com/
Latin America and Mexico: https://lenovo-la-es.custhelp.com/
EU: https://lenovo-eu-en.custhelp.com/
India/Asia Pacific: https://lenovo-ap-en.custhelp.com/
http://support.lenovoemc.com/

Content Copier wont restore after firmware upgrade

I upgraded my N95 8GB to the latest firmware this morning (30.0.018), took 2 complete backups using Contect Copier V4 prior to doing so, but after the upgrade every attempt to restore contacts, settings, etc has failed.
I've tried doing the recommended re-formatting procedure, followed by a restore, which did not help. I've tried restoring individual items only, instead of the whole lot, which also didn't work.
According to the log at the end of the restore, the restore completed successfully. Reality suggests otherwise though.
Could anyone please help?
Thanks,
Adriaan

Right, I've tried using OVI, which did NOT resolve the problem. In fact, it gave identical results to the content copier included with the nseries suite.
I've written to Nokia support who have replied as follows:
"In this instance, allow me to suggest a few workarounds in order to rectify the issue on hand.
First, I suggest that you delete any data not needed from your Nokia N95 8GB to free up the internal memory of your phone before restoring the backed up file. I would like to also suggest that you select the content files that you want to restore to the Nokia N95 8GB. Once you have connected your Nokia N95 8GB to the PC and launched the "Content Copier" application, please select the content file types that you want restored on the phone.
However, if you are still unable to restore the backed up file to your Nokia N95 8GB, there may be inherent issues with your Nokia N95 8GB that may prevent you doing so. In this case, please take your phone to your nearest Nokia Care Point for an assessment. The Nokia Care Point will assess if a repair is required and advise if this may be covered under warranty."
So it looks as if I'm going to have to take it in for repair...

After firmware upgrade problem CP1025NW

Similar Messages

Maybe you are looking for