After first back-up TM continues to make the same back up

I thought I had this problem resolved after getting rid of my AV program but TM still is not making new back ups. It makes its first back up but after that it makes a copy of the orginal back up and continues to do so until I restart the computer. After I restart it will make a correct back up of the changes and then after that initial back up it won't make any more new ones. It just continues to copy the previous on. I delete files and go into TM and they are gone on the Now screen but when i go to most recent back up after the change they are still there.

You say, "makes a copy of the original back up and continues to do." What exactly do you mean? How do you know it's a duplicate backup?
When you mount hard disk TM is backingup to, do you see multiple sparsebundles?

Similar Messages

After ios 8 update has anyones ipad started randomly selecting everything? Even after ios 8.0.1 update it has still continued to do the same thing.

After ios 8 update has anyones ipad started randomly selecting everything? Even after ios 8.0.1 update it has still continued to do the same thing making it immpossible to use ipad anymore. Has anyone had the same problem and/or knows how to fix this?

Try a Reboot pess & hold power button & menu button hold both down until you see Apple Logo you will not lose any data This may help but the ipad 2 is a bit under powered for iOS 8 If you can a very good buy now is the iPad Air 32G Since they brought the new one out the price for this model Has come down by £120.00 That's the one I am using and it works great on iOS 8.1 Bsydd uk

IPhone 4S will either show 100% battery or dead battery right before shutting off, nothing in between. Has iOS 7 now after restore and is continuing to do the same thing as when it has iOS 6. Frustrating, like not having a fuel gauge on your car!!l

iPhone 4S will either show 100% battery or dead battery right before shutting off, nothing in between. Has iOS 7 now after restore and is continuing to do the same thing as when it has iOS 6. Frustrating, like not having a fuel gauge on your car!!l. Purchased around March of this year so not very old, never wet, damaged, etc.

Read: http://www.forbes.com/sites/larrymagid/2013/09/27/how-to-preserve-battery-life-i n-ios-7/?partner=yahootix

How to make the same code that works only?

how to make the same code that works only?
code:
Form2.Close = Me.Enabled = true
effect such as this code

I have this code:
Public Class Form1
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Form2.Show()
Me.Enabled = False
End Sub
Private Sub Button5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button5.Click
Form3.Show()
Me.Enabled = False
End Sub
End Class
he wants to after closing Form2 and Form3 unblocked the whole form1
it means that:
when I click the button, displays the himself form2 and blocks himself form1" and after closing Form2 , unlocks himself Form1"
the same with Form3

When opening iTunes I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled, reinstalled many times - nothing! help please.

When opening iTunes on my new Windows 7 PC I continue to get the same messages, 'The program can't start because AVFoundationCF.dll is missing' and 'iTunes was not installed correctly. Error 7 (Windows error 126)' I've uninstalled and reinstalled many times to no avail, even tried it on a different user account and still nothing. I recently installed Panda Internet Security 2012 (about 12 days ago), initially iTunes worked fine as usual but within the last few days I've been unable to open it with the same messages appearing. I've read through some of these pages and tried everything that's been advised, uninstalling and reinstalling while internet and laptop security is swithched off, downloading tools to completely remove anything related to iTunes, tried it in Safe Mode, nothing has worked. I've also noticed that in the start menu when I click on iTunes, it says '(empty)' where it should have the logo and ability to start the program, does this mean it doesn't download + install properly each time I've tried? Any help would be enormously appreciated.

Doublechecking. Have you also tried the following user tip?
Troubleshooting issues with iTunes for Windows updates

I cannot open iTunes. I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?" I downloaded it and it and I continue to get the same message. How

I cannot open iTunes. I get a message that says "The file iTunes library.itl cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"
I downloaded it and it and I continue to get the same message.
How do I fix this? Thanks, Dee

Upgrade iTunes to the latest version. It should be 10.5.3.

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

My apple tv continues to play the same song from a playlist that is on shuffle.

My apple tv continues to play the same song from a playlist that is on shuffle. Is there a setting I need to adjust?

I do not see anything there. I have a left arrow and song title on top with a list icon. Nothing on the bottom but the direction arrows, pause button and volume.

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem?

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

On iOS 8.3 using 'Keynote for iPad' the app freezes repeatedly (since the last update of April 21st) while editing slides. 30 sec. later comes alive again, then freezes again after a few editing actions. Anyone with the same problem? I tried everything 'app support' tells me except deleting and reinstalling the App because I have a lot of files that I'd lose. Recommendations anyone? [email protected]

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

When I want to make a phonecall with my iphone5, I hear absolutely nothing....no ringing and no talking when connection established. When I make the same call but now on speaker, no problem or what so ever, can anyone help me ?

Hello there, RobenCaatje.
The following Knowledge Base article is specific for the issue you're describing:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Specifically:
Resolution
Verify that there is nothing plugged in to the headset jack, including headsets, headphones, or adapters.
Make sure the Ring/Silent switch is not switched to silent.
While on the Home screen, adjust the volume buttons. If you see the icon below, indicating that headphones are attached, there may be debris or an object lodged in the headset jack:
Check the headset jack. If there is an object lodged in the headset jack that is not easily removed, have the iPhone serviced to remove object.
For Original iPhone: If there is light debris, such as lint, in the headset jack, try connecting a pair of headphones to the headset jack and then remove the headphones. Repeat this several times to remove the debris.
If you have installed a protective film on the display, either ensure that the receiver is not covered or remove the film completely.
Check the receiver mesh (which is on the top front of the device, above the display). If it appears blocked, use a clean, small, dry, soft-bristled brush to carefully and gently brush away any debris.
If you have paired with a Bluetooth headset that is nearby, either use the headset or turn Bluetooth off (chooseSettings > General > Bluetooth).
Restart the iPhone.
If restarting the iPhone doesn't resolve the issue, try restoring the device.
If the issue persists, go to the Service Answer Center - iPhone for information on service.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Ok so i'm trying to do a conditional format on numbers if (cell a2) = greater than or text then make the same cell or another cell do something. Does anybody knows how to do that on numbers. thanks.

hi I'm from Italy.
ok so i'm trying to do a conditional format on numbers if "a cell" = greater than or text then make the same cell
or another cell do something like insert a number or change color.
Does anybody knows how to do that on numbers?. thanks.

Among the things you'll learn from the User Guide:
Conditional formatting can be used to change the style of the text in a cell and/or the fill colour of the cell.
A formula may be used to set the value in a cell. In both cases, the format rule or the formula affects only the cell to which the rule is attached or which contains the formula. Neither values or formats may be 'pushed' onto another cell.
Regards,
Barry

Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

Well I have a new macbook pro and there is a software update available and after i update it, it keeps asking for the same thing to update over and over again! What can be done?

The App Store version sometimes gives problems. As you can't install 10.8.4 from the App Store, download and install the Combo edition > http://support.apple.com/kb/DL1659?viewlocale=en_US&locale=en_US This edition will work and will update OS X to the most recent version, in that case, 10.8.4

Can i migrate an existing (hosted) email account to iCloud and continue to use the same email address?

Can I migrate an existing (hosted) email account to iCloud and continue to use the same email address?

No. Although you could migrate your mail to iCloud via IMAP, iCloud does not support sending emails from your own domain - only iCloud's own @me.com and @mac.com addresses can be used.

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITun

I am having an installation failure issue with my itunes 11 software. File is corrupted and i don't know what to do. I've un-install and re-installed the software three times and continue to get the same error message. It states that "This copy of ITunes is corrupted or is not installed correctly. Please reinstall Itunes"
iMac, iOS 6

HI,
If your old version of iTunes is still working - then I sugest you stick with that.
iTunes 11 is a lousy update - It will not retain your playlists, you can't find and delete duplicates... and a whole arry of oyher issues. (have a look around this forum to see how many issues IT11 gives people)
Just a friendly advise and warning :-)

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for furth

I'm trying to update my Photoshop CS5, but continue to receive the same problem every time. The application manager update dialogue box simply states "some updates failed to install." There's no specific error code, but a link to contact support for further assistance. It doesn't take me to customer support, but does take me to a screen which states. "Error "This serial number is not for a qualifying product." I've checked my account and the product serial number is associated with my account., so I don't see any problem. I have not been able to find a resolution to this problem, so I hope that someone can point me in the right direction. Thank you!

update directly, Product updates

After first back-up TM continues to make the same back up

Similar Messages

Maybe you are looking for