After fixing all of the names and artists in iTunes their still the same on my iPhone?
I just finished renaming song titles and artist names on my iTunes but they're still messed up on my iPhone. Only a few that I changed are correct. I autofilled the songs and they should have all synced into my iPhone but the songs on my phone still have incorrect artist names and song titles. I have no idea what's wrong. I've been at this for almost 3 hours.
If your tags are correct in iTunes, but incorrect on your phone, you could try removing and resyncing your music library to your phone. Open iTunes on your computer and verify that you have selected "Keep iTunes Media Folder Organized" in iTunes>Preferences>Advanced. Connect your phone to iTunes, uncheck syncing music on the Music tab in your iTunes sync settings on your computer, sync (which will remove your music from your phone), recheck syncing music on the Music tab, sync again (to restore the music to your phone). Hopefully you will get the correct tags on your phone now.
Similar Messages
-
Type the name and password of a user in the "(null)" group to allow this.
To connect to wifi while in the recovery partition, I'm asked to authenticate the wlan's certificate, and in order to do that I'm asked for "the name and password of a user in the "(null)" group" to make changes to the Certificate Trust Settings. Anyone know what or which user may this be?
I'm not able to pass from the initial apple screen when I boot, so I wanted to repair or reinstall Lion, but in order to do that I need to connet to the WLAN to download it.Hi, I called Apple Support this day, and the answer is that enterprise WPA wireless is NOT supported by Lion Internet Recovery.
You can find the supported configurations and protocols on Apple site:
http://support.apple.com/kb/HT4718?viewlocale=en_US -
previously i set up iphone 5 same user (account) with my brother.. Now i want to set up as my own User... but try to Erase all content n settings and plug in itunes to set up as a new iphone but it's keep sync with my brother phone ... help please ?
I recommend that you
Create a NEW account/ID for her using these instructions. Make sure you follow the instructions. Many do not and if you do not you will not get the None option. You must use an email address that you have not used with Apple before. Make sure you specify a birthdate that results in being at least 13 years old
Creating an iTunes Store, App Store, iBookstore, and Mac App Store account without a credit card
Use the new ID on her iPod but only for:
Settings>Messages>Send and Receive
Settings>FaceTime
Settings>GameCenter
and Settings>iCloud
Continue to use the same/common Apple ID for Settings>iTunes and App stores so you can share purchases. -
Take My Nashille Album, Which had the right Album name and right artitsts is now "American Ride" By Tobey Keith!!! And there are many more like that!
Backup with this User Tip, restore the library to the new computer using the same tool, keep the backup up-to-date in future. Deauthorize the old computer if you no longer need to access protected content on it.
As to your issues with compilations albums select all the tracks, set the Album Artist to Various Artists and on the options tab set Part of a compilation to Yes. See Grouping tracks into albums for details.
tt2 -
I've had the iPod for a few months and it worked great. For some reason it went into recovery mode but I have no clue. I've always used the laptop I have with the same wifi. As soon as I plugged by ipod into the computer to recharge the battery it went into recovery mode.
Side note: I know almost nothing about computers.Error 3004
Resolve communication issues
Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers. -
LAN Networking / UUID error - "You may need to enter the name and password"
I'm having an issue with networking via ethernet cable. I'm connecting to Windows Vista via ethernet from my macbook pro.
Everything was going hunky dory until today when I connected and tried to copy a folder over from my desktop to a folder on my vista machine.
The error is a three tier one, as follows:
1. +"You may need to enter the name and password for an administrator on the computer to change the item name "..." - stop or continue"+
2. +"The item "..." contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?" - stop or continue+
3. +"The operation cannot be completed because you do not have sufficient privileges for some of the items."+
This happens with all files and folders that I try to transfer over. I have full permissions on both ends to do this and the folders have full permissions.
I've done a bit of trawling and have found out that if you goto: system prefs - accounts (click unlock) - right click on the user in question - advanced options, you can click on the "create new" button under UUID and create a new UUID digit, then restart. This works!!!!... But...
...it only works for a little while. After transferring a few folders or files accross, it comes up with the three tiered warning: "you may need to enter the name and... etc etc."
This is really annoying.
I've found my initial answers on this thread: http://discussions.apple.com/thread.jspa?threadID=1823835&tstart=45, but this issue seems to go one step further by constantly not allowing me access
Has anyone got any thoughts about what I can do? I've also tried running applejack on startup, but this doens't work either...Actually I get some other errors as well:
"You may need to enter the name and password..."
Then I click continue...
"The item "filename" contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?"
I click continue...
"The operation cannot be completed because you do not have sufficient privileges for some of the items."
I am copying a text file made from textedit. I have logged into the shared drive on my iMac. I get the same errors coying to my own user folder. Same account on both machines.
But it does copy a blank version of the file to the drive and adds the .txt extension to it. Then I can delete it from the share. -
When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.
No, this standard has been implemented for several decades.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
It is just conceivable you burned a CD that exactly matched one already in the Gracenote database. Gracenote uses track count and duration to decide what CD it is you have in a computer. If you have one that matches that it will label it. You could conceivably even have one that matches it that is not the correct one.
This script will only work on Macs:
http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes -
I lost all of my artist names and album names for my iTunes library. They are all now on one album. How can I get the album and artist names back?
I have a script called ExportImport for this task, but it only runs in Windows.
In principle something similar should be possible in AppleScript, but I don't currently have access to a Mac to write it myself.
tt2 -
I see songs such as "Monday, Monday" or "Paint It, Black" or even the artist name such as "Fireballs, with Jimmy Gilmer" which have comma's in them, being a problem when I try to do the following:
1. Export a playlist which contains songs which are all there and play fine, but some have comma's in the title such as listed above.
2. I then open that file in Excel and bring it in as a Tab-delimited file. Everything lays out fine, and all the songs are thing (including those with comma's).
3. I then sort the varoius fields I want (which I can't do in i-tunes because i-tunes won't sort it properly), and resave the file as a newly named file, which is also a .txt file.
4. I then import that playlist into my itunes. It is exactly the same songs that I just had exported but i-tunes says some of the songs can't be found.
I have traced this problem to comma's in the file name of the song such as listed above. There must be a solution to this either as the file is opened in excel or in how it's saved or some other solution short of having to rename song/artists without using comma's.
Thanks.The additional problem is the file name of the song itself. Even if I were able to delete the commas or replace with a space for example, changing the file name would result in itunes not being able to find the file. I would have to go through each file (out of about 15,000+ songs) to find any that have titles such as described in this thread and change not only the song and artist in the fields, but changing the mp3 file itself.
I fear that I am really pretty much going to have to start with a list of songs that have no comma and then do a file compare to find those songs with commas and then just physically moving them into a new playlist I'm trying to create, but this is a royal pain as I want to be able to create a variety of playlists based on these chart dates/peak positions.
I'm trying to sort the songs in this manner: I use different fields in itunes so that I can put the "peak position" of each song based on Billboard charts, as well as the date the peak position was acheived. I use the "comment box" for that. I use the "grouping" field for my peak position.
So I end up with something like "10/14/1980" in the comment box as the peak position for a song which is in the grouping field, and so forth. If I try to sort the comments column in itunes for example, it won't sort properly. If I sort the Grouping field, it will bring up all the "1's", but that's followed by "10", 11, ...19, then "2", etc. This is why I want to export the playlist and sort it as I want, and then reimport the playlist into itunes.
What I'm ultimately trying to achieve is a year-by-year peak position playlist so that I end up with every #1 song (in this case) from, say, January 1st 1980 and then every #1 song in sequential order for the rest of the year falls in line. I have chart position dates from 1955 through 1999. I have entered in all the data from Billboard books I own so I can really create some amazing playlists, but these commas are problematic. Had I known this ahead of time I would have made "Monday, Monday" as "Monday Monday" and not included commas, but it's too late for that.
Any suggestions? -
i have an iphone 4 and i have upgraded to ios 5. but after upgrading all my apps disappeared and in the summary tab in itunes it jus shows as other data..! please help
When I went to reload my phone it gave the option of restoring with icloud or itunes so i chose itunes (assuming icloud would have many more bugs). Afterwards, I had no music and 6.6g of other.
What I did was go into itunes, clicked my iphone 4, and clicked on each of the top tabs (summery, info, apps, ringtones, music, etc.) and ensured I had them all clicked onto sync/selected playlist etc.As my phone restored, the 6.6g of other dropped to .99g of other.
Unfortunately, all my songs are gone but everything else seems to be in tact. I don't think there is any way around this issue for now with the new ios 5 update when syncing either an ipad or iphone. I have an ipad 2 but am going to hold off on updating it until apple gets the bugs sorted out because, I'm sure you will agree, getting the music back to where you want it to be is a total nightmare and takes ages to not only pick the right songs and artists to put on it, but also the ones that will fit correctly with the space, depending on the size you have.
I hope that helps. -
Itunes erased all the album and artist info when reloading library!!!
My problem is a big one. I've got 8600+ songs (800+ albums) on my hard drive. These are all from physical CDs; I ripped them in wav, then converted them to mp3. When I did this, I kept both the wav AND mp3 files in each respective album folder; about 400G of wav and 80G of mp3.
OK, so a couple weeks ago I got hit with a virus. It messed up my XP OS to the point where I needed to do a reformat and reinstall. All of my music files are on an external hard drive, so no big deal there. I finish the reinstall, re-download itunes, and tell it where to find my music, and to import it into the library.
This is where things go horribly wrong. Itunes imports all the mp3 files in as separate folders/albums, just like before, with all the track and artist info intact. However, for some reason, it took all the wav files and dumped them into one giant Unknown Artist/Unknown Album folder. In doing so, it appears to have stripped the artist AND album info from every single one of the 8600+ tracks! I don't know why it did this, as the wav files in the itunes folder all had the exact same track info as the mp3s.
My question now is: is there any way I can get this info BACK, any program that can look at the individual tracks and figure out what artist and album they go with? Or is there something within itunes that can do it that I haven't found yet? There's no way I can go through and do this track by track; I can't even begin to calculate how long that'd take. My only OTHER option would be to re-rip all the CDs, but again, that took months the first time and I don't want to do it again. However, these files are pretty much useless as they are, in a giant pile that seems only to be organized by the songs' respective track numbers.
I am screaming HELP in capital letters here. Even if I could find a program or solution that would find MOST of the tracks' info, I'd be happy. I'd also be interested in knowing why itunes did this in the first place, for future reference.
And just to head off one solution I expect to be offered, no, I did not have the files backed up anywhere else; reimporting an un-reorganized version of the library isn't an option. I had just finished ripping them and hadn't picked up a second hard drive yet. I know, first thing I should have done.
In any event, any help would be appreciated. Please feel free to email me. Thanks.I just remembered some older posts talking about some software from musicbrainz.org.
It might be able to make some sense out of all those WAV files, if you decide to spend the time on it. Honestly I'd prefer to rip my CDs than go through something like that, because I'm a control freak and would not trust the program to really find the right info....but that's just me. It might be easy to set up and a snap to use, for all I know.
http://forums.musicbrainz.org/viewtopic.php?id=1730 -
I am using Mail with OS 10.9.1. I used to be able drag and drop names from my address book into the address header, but can no longer do that. I now have to type each name in. Does anyone know if there is a setting for this or is it a feature of the updated software? Thanks for any info!
Yes, that appears how Mavericks works right now. However, you can open the Address Panel, select all your contacts, then click the To (or CC, or Bcc) buttons to move the selection to the address field.
If it is not already in the Toolbar, right-click on the Toolbar and select Customize Toolbar…
Then, drag the address panel up to wherever you want it.
You may also want to add it to the New Message window in the same way. -
In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!
You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
https://www.macupdate.com/app/mac/15485/labels-&-addresses
I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
Regards. -
I created a Group and put in all names and email addresses but cannot get the group to appear in an outgoing email message. What am I doing wrong?
This may help.
Can't connect to the iTunes Store
What happens whenyou try to connect? Error messages? -
If i pass the SEGMENT NAME and its SDATA can i get the all IDOCs?
Hello
If i pass the SEGMENT NAME and its SDATA can i get the all IDOCs of these values(sdata) holding? is tehre any standard SAP function module?
Moderator message: please search for information and try yourself before asking.
Edited by: Thomas Zloch on Aug 23, 2011 2:44 PMHi Uwe,
Thanks very much for your reply, now I have another problem .
Only the authrotiy field in the authority object is not '*' shall I check for the authority, how can I realize this?
thanks very much for your help.
Lament
Maybe you are looking for
-
I'm learning ADF Mobile and would like to learn if i can connect to existing Oracle database and retrieve information (without creating web services on my own)? If direct access (without web service) is not possible, how may i create web services tha
-
Custom counter not labeling clips in correct sequence
Anyone know why my custom counter feature is no longer assigning numbers to my clips in the right order? I have a series of clips -- say an interview -- I select them all in sequence, and then using custom name and counter I expect to see them numbe
-
Very very urgent pls help me!!!
I have installed oracle 10g client in my computer running windows xp professional. i am really having problem with username,password and hoststring. Please help me out with this details regards madhu.
-
Hello, I was downloading an album, and one of the songs stopped while downloading. It had an error (-208 the first time) and quit, and downloaded the rest of the songs on the album. I was able to d/l another one, but still have that song that won't d
-
ITunes 10.1.1 has wiped my library HELP!!!!!!
Please can someone help me - I updated iTunes to 10.1.1 earlier this afternoon - everything went as normal, I restarted my laptop when it asked me to once the update had completed. Whilst the update was going on I did go into iTunes and purchase a so