After forced HDD change and re-installation of Firefox on desktop and installation of newest version on my Android tablet, I get a sync code on both but cannot insert the code of one of the devices on the other.

Desktop with Windows7. Tablet is ASUS Transformer. Both could sync before the mentioned changes.
I have a sync account with Firefox.
Other solutions like 'change password' or 'retrieve renewal key' not possible.

It sounds like your desktop profile is (still?) corrupt; it's failing to process the wipe on bookmarks. So let's be super thorough: we'll clean up the desktop, then reconnect so the Android device's data will replace it.
My suggestion is to do the following. Read all of the steps before you start. I recommend that your Android device is on wifi.
# On your Android device, go to Settings > Accounts & sync. Remove your Sync account. Your Firefox profile will be unchanged.
# On your desktop, create a new profile.
# On the new profile, assuming you want to re-use your Sync account, follow the instructions below.
# Re-pair your Android device with the new desktop profile, and wait for it to finish syncing before syncing the desktop.
Connecting to an existing sync account:
# Set Up Sync
# I have an account
# I don't have the device with me
# Enter username and password, choose "I have lost my other device"
# You'll get a dialog with a new recovery key. Choose "Change recovery key".
Let me know if you have any problems!

Similar Messages

  • How do u keep you iPad Air and you iphone5  appointments link together after the first setup so u can enter the appointment on one it will go to the other one?

    How do u keep you iPad Air and you iphone5  appointments link together after the first setup so u can enter the appointment on one it will go to the other one.

    Use iCloud to keep them in sync.
    Do you have an iCloud account?

  • I have two Apple IDs and when I got an Iphone 6, only the apps from one Apple ID are on the phone. How do I get my other apps on there?

    I (stupidly) have two Apple IDs and when I got an Iphone 6, only the apps from one Apple ID are on the phone. How do I get my other apps (from my old Iphone 4) on my new Iphone? Thanks

    You can use the same appleid that you purchased the apps with on the phone for the App store. Settings> iTunes & App Store and continue to use the other id for everything else allowing you to have access to your previously purchased apps. You can then either sync or download the apps without paying for them again.
    It can be quite handy having two appleids - it can be quite useful if you can manage them correctly. One id for the store and one for imessage is good for privacy if you have the same id in use on another device.

  • Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

    Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously

    As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.

  • I have multiple apple devices mainly used between me and my wife , my question is that can i have two sets of contacts backed up to icloud one for her devices and one for my devices using the same itunes account

    i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
    now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
    i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
    please guide

    You can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device).  There is no requirement that you use the same Apple ID for purchases and for iCloud.

  • !0.5.8 How do I copy the 'system' form one internal Hard drive to an other (BY CD Packed up) Thank you

    !0.5.8 How do I copy the 'system' form one internal Hard drive to an other (BY CD Packed up)  I have tried but it will no show 'live' system folder - do and how can I bless it ? Thank you

    Carbon Copy Cloner will allow you to de-select directory trees, so you could use it to copy over everything EXCEPT the /Users directory tree.
    Mac OS X is NOT just the System Folder.  If you do not copy over the rest of Mac OS X, it will not boot.  So better to exclude Users and take everything else, then it is to try and pick and choose.
    The other approach is to install a New Mac OS X, and then copy over the stuff you want from the home folder(s) and reinstall any apps you want.

  • Dynamically change the contents of one combo box based on the other

    Hi Forum,
    I have a question which might have a possibly simple answer. Well anyway help me out since i could not find the simple answer.
    I am building an application using Swing and binding with BC4J using JClient. My GUI has combo boxes, grids, editboxes. My requirement is that i should be able to dynamically change the contents of one combo box based on the selected item in trhe previous combo box. For example, when i choose a country in the "country combo box", the "states combo box" should show the list of the states of the selected country.
    Now how do i do this using binding. If not, how do i write custom querirs in BC4J layer and return a resultset to the remote application so theat i can populate the dependent combo boxes.
    I will appreciate if anyone can help me out in this regard.
    Thank You
    Sumit

    there could be quite a few number of ways of solving this problem.
    One way is through event handlers.
    taking your example as a model when user selects a country you could fire an action with a flag set to ture. A method will return the states from the DB or your temporary files or what ever and then the true flag will be used in the states combo box rendering.
    other way: javascript
    this might be a bit clumsy as you will need the states information in a property file and you can get the info as the user selects a country.
    regards,
    raj

  • Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport.  Then they can get on, but it knocks one of our devices off the network.  Any ideas?

    Our airport extreme network works fine with our 6 devices. But when someone comes over and tries to log on, they can't until we restart the airport.  Then they can get on, but it knocks one of our devices off the network.  Any ideas?

    I have not done a factory reset, I was trying to find out if I had some setting configured wrong first.  I figured I'd just make things worse if went through a reset! 
    Here is a couple of screen shots:

  • I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

    I have Airport Extreme as the base unit and an Express unit in a room separated by a brick wall to improve signal. Express shows a green light indicating signal but my iPad does not perform well. How can I improve other than hardwire ethernet connection?

    Other suggestions, and more info about the nature of the problem, may be in this Apple tech note.
    http://support.apple.com/kb/HT1365
    For example, you might find that the brick wall is not the only problem. There may be other devices pumping out enough wireless interference to be making things even worse.
    I agree with Bob Timmons that Ethernet is best and most reliable. And that powerline (which I use) is easier and potentially faster than wireless...but only if your power lines do not have electrical devices plugged in which produce electrical noise on the line. Powerline will be slower than Gigabit Ethernet.
    Ethernet cable is the only way to ensure that the signal goes directly there in a shielded way for a clear fast signal. Wireless and powerline are much slower because of all the other things the signal has to fight past to get to the other device.

  • I updated my iMac to lion and now when i leave my desktop and it goes into stand by it like a picture is taken of the screen and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopar

    i upgraded my iMac to lion and now when i leave my desktop and it goes into stand by mode, its like a picture is taken of the actice desktop and when i want to log in the mouse point removes pixels so i can get to the user login screen this never happened ith snow leopard. does anyone else experience this and is there a fix?

    I have an iMac 8, 1 that I upgraded Leopard to Snow Leopard.  It was totally updated with the latest from Apple when I bought and tried installing Lion.  The upgrade failed, shot my OS and I couldn't boot.  Had the constant spinner on a grey screen..  did a format of the drive, hdd repair and everything came back clean... got back to Snow Leopard and all the updates on it again and then retried the Lion thing... same bs... dead duck.  Crashed my system one too many times.  I can't see where a few small changes, mostly app related can be classified as an OS upgrade and is not compatible with my iMac.  I have the stuff running on my Mac Pro but have yet to notice anything impressive.  I've always used F3 and really didn't require Mission Control.  Just open you app folder for launch pad... duh?  I use the hot corners anyhow.  As far as Safari is concerned... as a power user, Apple missed the boat on that for me.. full screen etc.. Wow.  I don't like the new Mail either..
    As you can see/read, I'm less than impressed with this release from Apple but I own so many of their products that I will have to put up with it for now... somehow the MS logo should apply to this release Steve.

  • Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

    Just had help installing cc 2014. get this dialog box when i open the app. One or more files in the adobe folder necessary for running photoshop are missing. Help

    Please Run the Cleaner tool to remove Ps CC 2014 :http://www.adobe.com/support/contact/cscleanertool.html .
    Restart your system and then try installing Ps CC 2014 again.
    Regards,
    Ashutosh

  • HT204053 How to learn the IMEI number/s (for more devices usine the same ID) by my Apple ID?

    How can I learn the IMEI number/s (for more devices usine the same ID) by my Apple ID?

    The app should locate both phones if they are using the same iCloud account and the app is signed into the account.  If they are using different account, sign out, then sign back in with the other account to track the other phone.
    If one of them isn't showing and you're signed into the correct iCloud account, go to Settings>iCloud on the phone in question and turn Find My iPhone Off, then back On.

  • I was told you you could view your app from your Iphone on the TV using Apple TV, such as the AFL football one i have purchased through the App store.

    I was told you could view your app from your Iphone on the TV using Apple TV, such as the AFL football one i have puchased through the App store. Is this true?

    Hi - you can do what you want to do with AirPlay from your iPhone - but unfortunately it is not as easy as the people in the Apple store told you - your first problem is that you have a non Apple router - you cannot extend a non Apple router wirelessly with the Express - you can only join the network and connect an ethernet device to it - you can however connect via ethernet and have it create a wireless network of its' own - you can set this up from your iPhone or the XP - but this is a complicated setup and would involve many different discussion areas of this forum - therefore I would suggest that you use your 90 days of support and consult directly with Apple to do this - go to this link - http://www.apple.com/support/contact/

  • HT201210 Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS.

    Hellow every one. i just updated my iphone 5 with the ios7. unfortunately i experience different type of bugs...the most important one to me is that the itunes store do not open at all. i'm disappointed with this version of iOS. my itunes version is updated and my mc version is also updated
    my question is: how can i make itues store to work? how can i go back to the previous version of ios?

    Upgrade to Snow Leopard - it's compatible with the latest version of iTunes, and still supports PowerPC applications.
    $19.99 - http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
    Snow Leopard is required if you wanted to upgrade to Lion, anyway, which you may want to in the future if the latest version of iTunes no longer supports Snow Leopard.

  • I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

    I installed Adobe FlashPlayer version 13.0 however I am getting an error message "Plug in error". Can anybody provide an answer. I already uninstall the version and install it again with the same results. Thanks.

    Adobe admits to a Flash problem here:
    http://forums.adobe.com/message/6285851#6285851
    YOu can apply the fix they show and tehn wait for them to fix the problem

Maybe you are looking for