After Forefront install clients ask for Windows Genuine Advantage

Hi,
I've deployed Forefront clients across the organisation via SCCM however after the deployment every Windows client is saying "Windows Genuine Advantage. Unable to complete Windows validation".
I can get round the issue by running IE as an admin and revalidating but this has only occurred since the Forefront installs hence posting in this forum. Has anybody had the same issue or know of a system-wide fix, visiting 500 clients to run IE as an admin
is not an option !
Many thanks,
Brian.

Is the date, time and region of SCCM is the same as clients?
Are you using any licensing management program?

Similar Messages

  • Just updated my iPhone 5s from ios 8.1 to 8.3. After the install it asked for Apple ID and password and to allow it to sync to Mac and iTunes. After following the steps my phone kept restarting - turning on and off and goes blank. How do I fix this??

    Just updated my iPhone 5s from ios 8.1 to 8.3. After the install it asked for Apple ID and password and to allow it to sync to Mac and iTunes. After following the steps my phone kept restarting - turning on and off and goes blank. How do I fix this??

    I have had about 9 iOS devices at work do this. 
    The fix and it will wipe out anything on your iphone is to connect it to your computer and have the latest version on iTunes open.  Hold the Power/Sleep and Home button till it blanks out.  Keep holding the home button untill it says recovery mode on the screen of the computer and do a restore.

  • After Waves install, Logic asking for serial number unless xsKey plugged in

    I installed Logic Studio and have been using it without dongle. After installing Waves Gold bundle and going through super paranoid copy protection maneuver, Logic now needs the xsKey dongle to run. Otherwise it asks for new serial number, then the original SN, which is of course the xsKey you must insert to proceed.
    Does anyone know what needs to be done to correct this, short of dumping the Waves stuff and starting all over again?
    Help!

    It's unlikely to be Waves related I think. I'm running iLok Waves plugins here in LP8 without my XSkey connected. Waves has nothing to do with the XSkey, it either uses hard disk authorisation (old plugs) or iLoks (current plugs).
    It sounds to me more like the Logic installation is screwy, if it's forgotten it's authorised. Try running some disk utils and verifying permissions, and if no joy, rerunning the Logic install and reauthorise.

  • Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7

    Palm TX will sync but not transfer data after installing 64bit drivers for Windows 7 using the USB cable. Does anyone have any advise?
    Post relates to: HP TouchPad (WiFi)

    @MikeNTxs - 64bit USB drivers have been available since April of 2010, and they do work. I've synced successfully to my Vista64 bit laptop many times via USB.
    See the sticky thread at the top of this section titled "64bit Palm Desktop drivers are here!"
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • How do I install apps without sharing my credit card information, when I press install it ask for my apple ID I put it in and after it says to review my iTunes account

    How do I install apps without sharing my credit card information, when I press install it ask for my apple ID I put it in and after it says to review my iTunes account

    Click the none option for your credit card when you review your apple id

  • I had a code to get logics pro for free and after it installed its asking me for a serial number does anyone know what to do from here.

    I had a code to get logics pro for free and after it installed its asking me for a serial number but it never gave me one to put in, it just started downloading and then asked me. Does anyone know what to do from here.

    I really don't think that is anywhere near on track.
    Most likely the trial version was installed earlier, is that correct?

  • If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition?

    If i install microsoft office after partitioning my hard drive for windows, will it be available on both sides of the partition? Will it be universal for the computer or would i have to install it on both operating systems? Or, if I install office BEFORE partitioning, will it be available on both platforms after i partition?

    If I understand your questions correctly, then I'm inclined to say no. Office for Windows and Office for Mac are two completely different applications. if you run via BootCamp, only one partition will boot.
    If you want to run Mac and Windows at the same time, you could do what I did:
    Get Parallels
    Install Windows as VM on top of Parallels
    Install Office in Windows
    Now, you can run your OS X, jump into Parallels' WIndows and use Office that way.
    It needs a lot of RAM, 4 is a bare minimum to realy make it sensible, 8 wouldn't hurt.

  • Error while installing "Identity Synchronization for Windows"

    Hello All,
    I am in the middle of installing Identity Synchronization for Windows and I am running into a probelm.
    After I gave the ldap address of the Java Directory server, (which is installed in the same machine that I am installing ISW on), then I specified the "Configuration Root Suffix" , and then I gave the "cn=Directory Manager" credentials, It returns an error saying...
    The selected Directory Server is not a configuration
    directory server. You must select a directory server that
    has "o=netscaperoot". Please note that merely adding the
    +"o=netscaperoot" entry will not suffice.+
    I am running Solaris 10 (SPARC) on a T2000, and I downloaded the latest version of "Sun Java System Directory Server Enterprise Edition" (6.2 I think it is...is there a way to find out?) and I downloaded ISW (1.1 SP1) from Sun.com...
    Anyone else had this problem? Any solutions? Thanks.
    -C

    That was that !
    The proof:
    possum@laptop ~/Downloads/Sun/Directory Server $ tar tvzf DSEE.6.2.Solaris-Sparc-full.tar.gz | more
    drwxr-xr-x svbld/staff       0 2007-08-21 13:51 DSEE_Directory_Editor/
    -rw-r--r-- svbld/staff 3154227 2006-10-23 15:23 DSEE_Directory_Editor/DE_InstallConfigGuide.pdf
    -rw-r--r-- svbld/staff  113483 2006-10-23 15:23 DSEE_Directory_Editor/DE_ReleaseNotes.pdf
    -rw-r--r-- svbld/staff 9649312 2006-10-23 15:23 DSEE_Directory_Editor/de.class
    -rw-r--r-- svbld/staff     178 2006-10-23 15:23 DSEE_Directory_Editor/install.bat
    -rw-r--r-- svbld/staff     167 2006-10-23 15:23 DSEE_Directory_Editor/install.sh
    drwxr-xr-x svbld/staff       0 2007-08-21 13:53 DSEE_Identity_Synchronization_for_Windows/
    -rw-r--r-- svbld/staff     831 2007-08-21 13:53 DSEE_Identity_Synchronization_for_Windows/README.txt
    drwxr-xr-x svbld/staff       0 2006-11-07 01:32 DSEE_Identity_Synchronization_for_Windows/installer/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:16 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:17 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/
    drwxr-xr-x svbld/staff       0 2006-11-07 01:16 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/
    drwxr-xr-x svbld/staff       0 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/
    drwxr-xr-x svbld/staff       0 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/
    -rwxr-xr-x svbld/staff  186114 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_zh.properties
    -rwxr-xr-x svbld/staff  163040 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_es.properties
    -rwxr-xr-x svbld/staff  163040 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_es_ES.properties
    -rwxr-xr-x svbld/staff  184456 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_zh_TW.properties
    -rwxr-xr-x svbld/staff  233399 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_ko.properties
    -rwxr-xr-x svbld/staff  233399 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_ko_KR.properties
    -rwxr-xr-x svbld/staff  162199 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_de.properties
    -rwxr-xr-x svbld/staff  162199 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_de_DE.properties
    -rwxr-xr-x svbld/staff  172057 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_fr.properties
    -rwxr-xr-x svbld/staff  172057 2006-10-25 14:45 DSEE_Identity_Synchronization_for_Windows/installer/admserv_package/setup_data/l10n/locale/resources/ASSetupResources_fr_FR.propertiesSo, we need both packaging: native PKG and tar.gz ! Great !
    I think this thread can be marked as resolved now.

  • Error Code 8024200D while installing update KB3000850 for Windows 8.1

    Error Code 8024200D while installing update KB3000850 for Windows 8.1
    I have been prompted for the last 10 days to install the important update KB3000850 in my laptop, but the installation fails every time.
    Two days ago, on March the 12<sup>th</sup>, I installed 31 updates without any problem. What is wrong with this particular update?
    You will find below my dialogue with Microsoft Support Engineer, Mr Niranjan Manjhi, who referred me to you:
    Hi Michelle,
    Thank you for posting your query in Microsoft Community.
    I understand that you are unable to install the a specific update KB3000850. I will be happy to assist you with your query. Let me ask you;
    Is your computer connected to domain?
    Which security software is installed in the      computer?
    Do you remember making any specific change in the      computer prior to the issue?
    This November update rollup also includes all previous updates since the previous image update in April 2014 and this includes performance and reliability
    improvements.
    Cause:
    This issue occurs because a process keeps a file in the component store open. Therefore, the file cannot be deleted or overwritten. Let's try the methods below and
    check the status.
    Method 1: Depending on the architecture of your
    Windows 8.1 operating system, I would suggest you to install the following package first and then try installing the KB3000850.
    All supported x86-based versions of Windows 8.1: [link] Download the package now.
    All supported x64-based versions of Windows 8.1:
    [link] Download the package now. 
    Restart is required.
    Method 2:
    If the issue still persists, run the Windows Update Troubleshooter and check the status.
    Click to run
    [link] Windows Update Troubleshooter
    Also refer to:
    [link] Troubleshoot problems with installing updates
    Hope this information is helpful. Please feel free to reply in case you face any other issues with Windows in future.
    Regards,
    Niranjan Manjhi
    Dear Niranjan,
    Thank you for your answer.
    To answer your questions:
    1) Yes, my laptop is connected to the domain,
    2) My security software is McAfee Total Protection, the same I use for my PC running Windows 7 XP,
    3) I did not make any specific change to the laptop. It is true though that I run regularly McAfee´s QuickClean.
    In your answer, you suggested 2 methods for resolving the problem.
    I chose to apply first the second one, i.e. I ran once again the Windows Update Troubleshooter, which revealed again the following status:
    Potential Windows Update Database error detected Ox800F08F: Not fixed
    Windows Update components must be repaired: Fixed
    And a last information: Yesterday, McAfee´s Vulnerability Scanner was automatically activated, showing as "critical" the update in question ("important" according to Windows)!
    As for applying the first method you suggested, I will need the services of a professional, someone more IT literate than myself.
    Michelle
    Hi Michelle,
    Thank you for keeping us updated on the issue.
    Since the computer is connected to domain, I would request you to post your query in the TechNet forums as your question is beyond the scope of what
    is typically answered in this consumer forum and would be better suited for the IT Pro audience on TechNet.
    Please post your question in the link TechNet Forums.
    Regards,
    Niranjan Manjhi

    Hi there @Achintya-only
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I see that you are getting an error code, when you try to install Windows 8.1 from USB or DVD. I am happy to assist.
    Just to clarify, you are using a standalone Windows installation disk, you are not using a factory recovery image. Is that correct?
    Have you run the hardware diagnostics on your notebook? HP Notebook PCs - Testing for Hardware Failures (Windows 8)
    What operating system was on the system before, and have you made a set of recovery media, for your original factory installation?
    Please let me know what you find.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • I purchased monthly subscription to Acrobat Pro. After I download, it asks for a serial number. I don't have one - what gives.

    I purchased monthly subscription to Acrobat Pro. After I download, it asks for a serial number. I don't have one - what gives.

    Hello Nelson,
    Please make sure that Acrobat is updated to its latest version i.e. 11.0.07.
    You can download the update from following link:
    Adobe - Acrobat : For Windows
    Regards,
    Anoop

  • I have installed LR 6 for windows (win7) and LR will not start but hangs up

    I have installed LR 6 for windows (win7) and LR will not start but hangs up. I have uninstalled the software and re-installed it, Tried to open it as Administrator and it still hangs up with the Adobe banner (the picture) being displayed. Nothing happens. When I click on anything I get the message that Lightroom is not responding. I have asked to have a new catalog created for Lightroom 6............Please help.
    Thank you. Leo

    hbereth,,
    It is Ideal to install Creative Cloud app , if you are using Adobe apps.
    Creative Cloud is nothing but an updated version of Adobe Application manager. Adobe Application Manager is required for different purposes like Activation, Update.process and installation processes.etc
    Adobe application manager must be up to date , that brings to Creative Cloud application which is the updated version .
    No need to Sign in and all , just keep it install, if you are not okay with installing Creative Cloud app. it's okay , you can still have Adobe Application Manager only.

  • How do creative cloud apps get installed without asking for administrator?

    The title says it all but I'll reiterate. How do CC apps downloaded with the Creative Cloud desktop app get installed without asking for administrator user/password? Its the sam on both Mac and Windows and I don't understand how its doing it. This seems like a security hole to me.

    JscottCMD are you installing the Adobe Creative applications with a Creative Cloud Individual subscription?  If so please see Install and update apps - https://helpx.adobe.com/creative-cloud/help/install-apps.html for information on how to install the applications and updates included with your membership.

  • Satellite A110-195 after update of bios ask for password

    After i update the bios that i download form the toshiba website for the laptop and update if from the windows he ask for the reboot. After reboot notebook start asking for password for bios and system password too. now i cant get to the system.
    I try default passwords like Toshiba,BIOS, CMOS, phoenix, and PHOENIX. and didn't work. CMOS battery in a110-195 is soderd on motherboard. Is there any jumpers that i need to bypass to clear cmos.

    Hi
    Thats strange buddy.
    Why should BIOS set a password automatically after the update???
    Anyway. As far as I know the BIOS password can be removed only by an ASP technician only these guys know how to remove the BIOS password
    I think the ASP is your last chance to get the BIPS password removed from the system

  • HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

    Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
    iTunes has been running great on this PC for years. What's up?
    Ron

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • HT1937 I have successfully restored my iPhone 3 gs( Ios )  by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with ot

    I have successfully restored my iPhone 3 gs( Ios )  by itunes. After activation it is asking for activation. When I am going for activation its saying that no SIM card is inserted, but I have already Ufone SIM card is inserted. I checked it with other SIM card like Zong etc but the response was same i.e; no SIM card is inserted. It not catching the signals. I am trying to use  my wifi to activate my iphone but it iss not processing then i used itunes to activate by it's again saying that no sim card is detected.
    My all contacts and all data is in this mobile. Now Iam unable to contact anyone. Please help me. How can I sort it out?
    Thank you
    Regards
    Wazir Ali

    Well, if you did it yourself, then there is a chance that you damaged some other component inside the device that is causing your issue. The iPhone's are not user serviceable, and once you have opened the device you have voided any warranty and post-warranty support from Apple. I would try Google to see if you can find any other way to repair your device, as Apple will no longer look at it.

Maybe you are looking for

  • Issue in Downloading or Identifying correct Software zip file of EBS R12 !

    Hi, I am confused a bit about downloading the EBS R12 software Link from https://edelivery.oracle.com/download/osdc_download_links.html. Could you please specify which software Link or rather zip file is accurate in order to download EBS R12 for Inst

  • EDI & IDOC Configuration

    Hi Friends Any body please help me to my questions. 1) How to configured to EDI (Send idoc to third party Aramex). 2) What is the process code for Betmas01 IDOC. 3) How to raise idoc automatically when we create a data on sitemaster. (Betmas01). Than

  • Events in Bapi

    Hello, How do Handle the "Events in Bapi "? Where do we write the code to trigger the Events ? Please explain me clearly. Thanks in Advance.

  • Compiling java classes into dll

    Hi, Just trying to find out is there anyway I can compile the java classes into dll? If I am to use JNI and C++, will the dll compiled be able to work well in a platform that does not have JVM? Thank you.

  • In system log shows Error in technical configuration Error during the ret

    Hi, In sm21 it shows <Error in technical configuration Error during the retieval of logon data stored in>. Task...... Process                     User...... Terminal Session TCode Program        Cl Problem cl         Package 30808      Dialog work pr